Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment we...Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.展开更多
By mechanism transformation (anionic cationic) polymerization, diblock copolymer of butadiene and 2 ethyl 2 oxazoline (PBd b PEOx) was synthesized in two steps. The first step is the polymerization of butadiene bloc...By mechanism transformation (anionic cationic) polymerization, diblock copolymer of butadiene and 2 ethyl 2 oxazoline (PBd b PEOx) was synthesized in two steps. The first step is the polymerization of butadiene block capped with ethylene oxide and its tosylation; the second step is the cationic ring opening polymerization of 2 ethyl 2 oxazoline. The products were characterized by various methods, such as IR, 1HNMR, DMA, TEM and SAXS. The results show that the obtained copolymers possess high molecular weight and narrow molecular weight distribution, and that the content of 1,4 structure was controllable.展开更多
By changing both the monomer composition and the polymer structure, we have varied the mechanical properties of resorbable polymers. The polymers were synthesized by ring-opening polymerization using L-lactide （LLA...By changing both the monomer composition and the polymer structure, we have varied the mechanical properties of resorbable polymers. The polymers were synthesized by ring-opening polymerization using L-lactide （LLA）, ε-caprolactone （εCL）, trimethylene carbonate （TMC） and 1,5-dioxepan-2-one （DXO） as monomers. Well-defined triblock copolymers, microblock copolymers and networks have been evaluated, and comparisons between them show that it is possible to tune the mechanical properties. Triblock copolymers with an amorphous middle block of poly（1,5-dioxepan-2- one） （PDXO） and semi-crystalline end-blocks of poly（ε-caprolactone） （PCL） were stronger and had a higher strain at break than triblock copolymers with poly（L-lactide） （PLLA） as end-blocks. Polymers with both DXO and TMC in the amorphous middle-block and PLLA as end-blocks showed a lower stress at break, but the material gained elasticity, a property which is very valuable in tissue engineering. Mechanical properties of networks, synthesized by a novel method, containing PDXO and PCL are also presented. Although it is difficult to compare them with the uncross-linked polymers, this is an additional way to modify and widen the properties.展开更多
文摘Amphiphilic block copolymers poly(LysAA-b-DMS) consisting of a hydrophilic poly(N-α-acrylamide-L-lysine) [poly(LysAA)] segment with different molecular weights and a hydrophobic polydimethylsiloxane (PDMS) segment were prepared as follows. The precursor copolymer poly(Boc-LysAA-OtBu-b-PDMS) was obtained from radical polymerization of N-α-acrylamide-N-ε-tert-butoxycarbonyl-L-lysine-tert-butylester (Boc-LysAA-OtBu) initiated with 4,4’-azobis(polydimethylsiloxane 4-cyanopentanoate) (azo-PDMS) with the molecular weight of PDMS Mw = 4.3 × 103 in the presence of 2-mercaptoethanol (2-ME) as a chain-transfer agent. Removal of the protecting groups of the precursor copolymer was carried out in 80% trifluoroacetic acid aqueous solution to give poly(LysAA-b-DMS)-1-3. The weight average molecular weight of poly(LysAA-b-DMS)-1-3 was Mw = 1.02 × 104 – 2.52 × 104. From the 1H-NMR and fluorescence spectra measurements, poly(LysAA-b-DMS)-1-3 was determined to self-organize and form core-shell micelles in water. The critical micelle concentration (CMC) increased to 1000 - 4000 mg·L–1 with increasing molar ratio of the poly(LysAA) segment from 0.42 to 0.65. From morphological analysis with a scanning probe microscope (SPM), poly(LysAA-b-DMS) has microphase-separated structures made up of hydrophilic and hydrophobic regions with the domain size ranging from several tens to several hundreds of nanometers. Inhibition of thrombin activity of poly(LysAA-b-DMS) was evaluated from the Michaelis constant (KM) and catalytic activity (kcat) for the enzymatic reaction of thrombin and synthetic substrate S-2238 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.10 - 0.11 mM and 4.04 × 105 – 4.26 × 105 min–1, respectively. Fibrinolytic activity was also verified from the transformation of plasminogen to plasmin by tissue plasminogen activator (t-PA) using synthetic substrate S-2251 in the presence of poly(LysAA-b-DMS). The KM and kcat were 0.07 mM and 5.73 × 106 –5.95 × 106 min–1, respectively.
文摘By mechanism transformation (anionic cationic) polymerization, diblock copolymer of butadiene and 2 ethyl 2 oxazoline (PBd b PEOx) was synthesized in two steps. The first step is the polymerization of butadiene block capped with ethylene oxide and its tosylation; the second step is the cationic ring opening polymerization of 2 ethyl 2 oxazoline. The products were characterized by various methods, such as IR, 1HNMR, DMA, TEM and SAXS. The results show that the obtained copolymers possess high molecular weight and narrow molecular weight distribution, and that the content of 1,4 structure was controllable.
基金This work was supported by the Swedish Foundation for Strategic Research(No. A302:132).
文摘By changing both the monomer composition and the polymer structure, we have varied the mechanical properties of resorbable polymers. The polymers were synthesized by ring-opening polymerization using L-lactide （LLA）, ε-caprolactone （εCL）, trimethylene carbonate （TMC） and 1,5-dioxepan-2-one （DXO） as monomers. Well-defined triblock copolymers, microblock copolymers and networks have been evaluated, and comparisons between them show that it is possible to tune the mechanical properties. Triblock copolymers with an amorphous middle block of poly（1,5-dioxepan-2- one） （PDXO） and semi-crystalline end-blocks of poly（ε-caprolactone） （PCL） were stronger and had a higher strain at break than triblock copolymers with poly（L-lactide） （PLLA） as end-blocks. Polymers with both DXO and TMC in the amorphous middle-block and PLLA as end-blocks showed a lower stress at break, but the material gained elasticity, a property which is very valuable in tissue engineering. Mechanical properties of networks, synthesized by a novel method, containing PDXO and PCL are also presented. Although it is difficult to compare them with the uncross-linked polymers, this is an additional way to modify and widen the properties.
