A three-dimensional mathematical model was developed to investigate the effect of gas blowing nozzle angles on multiphase flow,circulation flow rate,and mixing time during Ruhrstahl-Heraeus(RH) refining process.Also,a...A three-dimensional mathematical model was developed to investigate the effect of gas blowing nozzle angles on multiphase flow,circulation flow rate,and mixing time during Ruhrstahl-Heraeus(RH) refining process.Also,a water model with a geometric scale of 1:4 from an industrial RH furnace of 260 t was built up,and measurements were carried out to validate the mathematical model.The results show that,with a conventional gas blowing nozzle and the total gas flow rate of 40 L·min^(-1),the mixing time predicted by the mathematical model agrees well with the measured values.The deviations between the model predictions and the measured values are in the range of about 1.3%–7.3% at the selected three monitoring locations,where the mixing time was defined as the required time when the dimensionless concentration is within 3% deviation from the bath averaged value.In addition,the circulation flow rate was 9 kg·s^(-1).When the gas blowing nozzle was horizontally rotated by either 30° or 45°,the circulation flow rate was found to be increased by about 15% compared to a conventional nozzle,due to the rotational flow formed in the up-snorkel.Furthermore,the mixing time at the monitoring point 1,2,and 3 was shortened by around 21.3%,28.2%,and 12.3%,respectively.With the nozzle angle of 30° and 45°,the averaged residence time of 128 bubbles in liquid was increased by around 33.3%.展开更多
The reentry vehicle will encounter thermal ablation,especially at the stagnation point regime.A theoretical work has been done to analyze the thermal effect of gas blowing due to thermal ablation of surface material o...The reentry vehicle will encounter thermal ablation,especially at the stagnation point regime.A theoretical work has been done to analyze the thermal effect of gas blowing due to thermal ablation of surface material on the head of a general hypersonic vehicle.By deriving the formulation,research takes into account the effect of gas blowing on the thermal dynamics balance,and then solves them by numerical discretization.It is found that gas blowing will increase the temperature and heat flux at the surface of stagnation point regime.展开更多
Gas cap blow down strategy is normally deployed for Ultra-thin oil rim reservoirs with huge gas caps due to extremely high gas oil ratios from wells in such reservoirs.The current state leads to loss of production fro...Gas cap blow down strategy is normally deployed for Ultra-thin oil rim reservoirs with huge gas caps due to extremely high gas oil ratios from wells in such reservoirs.The current state leads to loss of production from the oil reserves due to high initial reservoir pressure thus,reducing its net present value.Data on important factors essential to the productivity of oil rim reservoirs are used to build a heterogeneous ultra-thin reservoir with a time step of 10,000 days using the Eclipse software and its embedded correlations.The reservoir is subjected to a gas cap blowdown via a gas well,then an oil well is initiated into the model at onset and after time periods of 2000 days,4000 days,6000 days and 8000 days to estimate the oil recovery.It is expected that due to the large nature of the gas cap,pressure decline will be drastic and leading to a low oil recovery,hence the injection of water and gas at different rates at the periods indicated.The results indicate an oil recovery of 4.3%during gas cap blow down and 10.34%at 6000 days.Peak oil recoveries of 12.64%and 10.80%are estimated under 30,000 Mscf/day at 4000 days and 1000 stb/day at 6000 days respectively.This shows an incremental oil recovery of 8.34%and 6.5%over that recorded during gas cap blow down.The results also indicate that the gas production at those periods was not greatly affected with an estimated increment of 257 Bscf recorded during 30,000 Mscf/day at 4000 days.All secondary injection schemes at the respective time steps had positive impact on the overall oil recoveries.It is recommended that extra production and injection wells be drilled,enhanced oil recovery options and injection patterns be considered to further increase oil recovery.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51704062)the Fundamental Research Funds for the Central Universities,China(No.N2025019)。
文摘A three-dimensional mathematical model was developed to investigate the effect of gas blowing nozzle angles on multiphase flow,circulation flow rate,and mixing time during Ruhrstahl-Heraeus(RH) refining process.Also,a water model with a geometric scale of 1:4 from an industrial RH furnace of 260 t was built up,and measurements were carried out to validate the mathematical model.The results show that,with a conventional gas blowing nozzle and the total gas flow rate of 40 L·min^(-1),the mixing time predicted by the mathematical model agrees well with the measured values.The deviations between the model predictions and the measured values are in the range of about 1.3%–7.3% at the selected three monitoring locations,where the mixing time was defined as the required time when the dimensionless concentration is within 3% deviation from the bath averaged value.In addition,the circulation flow rate was 9 kg·s^(-1).When the gas blowing nozzle was horizontally rotated by either 30° or 45°,the circulation flow rate was found to be increased by about 15% compared to a conventional nozzle,due to the rotational flow formed in the up-snorkel.Furthermore,the mixing time at the monitoring point 1,2,and 3 was shortened by around 21.3%,28.2%,and 12.3%,respectively.With the nozzle angle of 30° and 45°,the averaged residence time of 128 bubbles in liquid was increased by around 33.3%.
基金National Key Research and Development Plan of China through the project No.2019YFA0405200.
文摘The reentry vehicle will encounter thermal ablation,especially at the stagnation point regime.A theoretical work has been done to analyze the thermal effect of gas blowing due to thermal ablation of surface material on the head of a general hypersonic vehicle.By deriving the formulation,research takes into account the effect of gas blowing on the thermal dynamics balance,and then solves them by numerical discretization.It is found that gas blowing will increase the temperature and heat flux at the surface of stagnation point regime.
文摘Gas cap blow down strategy is normally deployed for Ultra-thin oil rim reservoirs with huge gas caps due to extremely high gas oil ratios from wells in such reservoirs.The current state leads to loss of production from the oil reserves due to high initial reservoir pressure thus,reducing its net present value.Data on important factors essential to the productivity of oil rim reservoirs are used to build a heterogeneous ultra-thin reservoir with a time step of 10,000 days using the Eclipse software and its embedded correlations.The reservoir is subjected to a gas cap blowdown via a gas well,then an oil well is initiated into the model at onset and after time periods of 2000 days,4000 days,6000 days and 8000 days to estimate the oil recovery.It is expected that due to the large nature of the gas cap,pressure decline will be drastic and leading to a low oil recovery,hence the injection of water and gas at different rates at the periods indicated.The results indicate an oil recovery of 4.3%during gas cap blow down and 10.34%at 6000 days.Peak oil recoveries of 12.64%and 10.80%are estimated under 30,000 Mscf/day at 4000 days and 1000 stb/day at 6000 days respectively.This shows an incremental oil recovery of 8.34%and 6.5%over that recorded during gas cap blow down.The results also indicate that the gas production at those periods was not greatly affected with an estimated increment of 257 Bscf recorded during 30,000 Mscf/day at 4000 days.All secondary injection schemes at the respective time steps had positive impact on the overall oil recoveries.It is recommended that extra production and injection wells be drilled,enhanced oil recovery options and injection patterns be considered to further increase oil recovery.
