First-Principles Study of Blue Phosphorene and Graphene Intralayer Heterostructure as Anode Materials for Rechargeable Li-lon Batteries

There is an ideal desire to develop the high-performance anodes materials for Liion batteries(LIBs),which requires not onlyhigh stability and reversibility,but also rapidcharging/discharging rate.In this work,webuiltablue phosphorene-graphene(BlueP-G)intralayer heterostructure by connecting BlueP and graphene monolayers at zigzag edges with covalent bonds.Based on the density functional theory simulation,the electronic structure of the heterostructure,Li adsorption and Li diffusion on heterostructure were systematically investigated.Compared with the pristine BlueP,the existence of graphene layer increases the overall conductivity of BlueP-G intralayer heterostructure.The significantly enhanced adsorption energy indicates the Li deposition on anode surface is energetically favored.The fast diffusion of Li with energy barrier as low as 0.02-0.09 eV indicates the growth of Li dendrite could be suppressed and the stability and reversibility of the battery will be increased.With a combination of increased conductivity of electronic charge,excellent Li adsorption and Li mobility on surface,BlueP-G intralayer heterostructure with zigzag interface is quite promising in the application of anode material for Li-ion batteries.

Rational Design of Star-shaped Molecules with Benzene Core and Naphthalimide Derivatives End Groups as Organic Light-emitting Materials

A series of star-shaped molecules with benzene core and naphthalimides derivatives end groups have been designed to explore their optical,electronic,and charge transport properties as charge transport and/or luminescent materials for organic light-emitting diodes（OLEDs）. The frontier molecular orbitals（FMOs） analysis has turned out that the vertical electronic transitions of absorption and emission are characterized as intramolecular charge transfer（ICT）. The calculated results show that the optical and electronic properties of star-shaped molecules are affected by the substituent groups in N-position of 1,8-naphthalimide ring. Our results suggest that star-shaped molecules with n-butyl（1）,benzene（2）,thiophene（3）,thiophene S？,S？-dioxide（4）,benzo[c][1,2,5]thiadiazole（5）,and 2,7a-dihydrobenzo[d]thiazole（6） fragments are expected to be promising candidates for luminescent and electron transport materials for OLEDs. This study should be helpful in further theoretical investigations on such kind of systems and also to the experimental study for charge transport and/or luminescent materials for OLEDs.

The strategies for preparing blue perovskite light-emitting diodes

Metal halide perovskites have attracted tremendous interest due to their excellent optical and electrical properties,and they find many promising applications in the optoelectronic fields of solar cells,light-emitting diodes,and photodetectors.Thanks to the contributions of international researchers,significant progress has been made for perovskite light-emitting diodes(Pero-LEDs).The external quantum efficiencies(EQEs)of Pero-LEDs with emission of green,red,and near-infrared have all exceeded 20%.However,the blue Pero-LEDs still lag due to the poor film quality and deficient device structure.Herein,we summarize the strategies for preparing blue-emitting perovskites and categorize them into two:compositional engineering and size controlling of the emitting units.The advantages and disadvantages of both strategies are discussed,and a perspective of preparing high-performance blue-emitting perovskite is proposed.The challenges and future directions of blue PeroLEDs fabrication are also discussed.

Fine-tuning the thicknesses of organic layers to realize high-efficiency and long-lifetime blue organic light-emitting diodes

By using p-bis（p - N, N-diphenyl-aminostyryl）benzene doped 2-tert-butyl-9, 10-bis-β-naphthyl）-anthracene as an emitting layer, we fabricate a high-efficiency and long-lifetime blue organic light emitting diode with a maximum external quantum efficiency of 6.19% and a stable lifetime at a high initial current density of 0.0375 A/cm2. We demonstrate that the change in the thicknesses of organic layers affects the operating voltage and luminous efficiency greater than the lifetime. The lifetime being independent of thickness is beneficial in achieving high-quality full-colour display devices and white lighting sources with multi-emitters.

Pure blue and white light electroluminescence in a multilayer organic light-emitting diode using a new blue emitter

We characterized the 6,12-bis{[N-（3,4-dimethylphenyl）-N-（2,4,5-trimethylphenyl）]amino} chrysene （BmPAC）, which has been proven to be a blue fluorescent emission with high EL efficiency. The blue fluorescent device exhibits good performance with an external quantum efficiency of 5.8% and current efficiency of 8.9 cd/A, respectively. Using BmPAC, we also demonstrate a hybrid phosphorescence/fluorescence white organic light-emitting device （WOLED） with high efficiency of 36.3 cd/A. In order to improve the relative intensity of blue light, we plus a blue light-emitting layer （BEML） in front of the orange light emitting layer （YEML） to take advantage of the excess singlet excitons. With the new emitting layer of BEML/YEML/BEML, we demonstrate the fluorescence/phosphorescence/fluorescence WOLED exhibits good performance with a current efficiency of 47 cd/A and an enhanced relative intensity of blue light.

High color rendering index white organic light-emitting diode using levofloxacin as blue emitter

Levofloxacin （LOFX）, which is well-known as an antibiotic medicament, was shown to be useful as a 452-nm blue emitter for white organic light-emitting diodes （OLEDs）. In this paper, the fabricated white OLED contains a 452-nm blue emitting layer （thickness of 30 nm） with 1 wt% LOFX doped in CBP （4,4＇-bis（carbazol-9-yl）biphenyl） host and a 584-nm orange emitting layer （thickness of 10 nm） with 0.8 wt% DCJTB （4-（dicyanomethylene）-2-tert-butyl-6-（1,1,7,7- tetramethyljulolidin-4-yl-vinyl）-4H-pyran） doped in CBE which are separated by a 20-nm-thick buffer layer of TPBi （2,2＇,2＂-（benzene-1,3,5-triyl）-tri（1-phenyl-lH-benzimidazole）. A high color rendering index （CRI） of 84.5 and CIE chromaticity coordinates of （0.33, 0.32）, which is close to ideal white emission CIE （0.333, 0.333）, are obtained at a bias voltage of 14 V. Taking into account that LOFX is less expensive and the synthesis and purification technologies of LOFX are mature, these results indicate that blue fluorescence emitting LOFX is useful for applications to white OLEDs although the maximum current efficiency and luminance are not high. The present paper is expected to become a milestone to using medical drug materials for OLEDs.

Synthesis of Pyrazolines Used as Blue Organic Electroluminescence Materials

Three kinds of pyrazolines were designed and synthesized. Their structures were elucidated by IR, (HNMR)-H-1, MS, UV and elemental analysis. Their luminescent properties were determined, which indicated that they had strong blue fluorescent properties. One of them was designed to have good film formation. All the three kinds of pyrazolines can be used as blue organic electroluminescence materials (OELMs).

Developments and challenges ahead in blue perovskite light-emitting devices

Recently,perovskite light-emitting diodes(Pe LEDs)have developed rapidly in the green,red,and nearinfrared light emissions,owing to the unique optoelectronic characteristics of halide perovskites,such as high carrier mobility,narrow emission linewidths,high photoluminescence quantum yield,as well as bandgap tunability.However,the efficiency improvement in blue(especially deep-blue)Pe LEDs is still inferior to other analogs,which severely restricts the Pe LED applications.Here,we systematically summarize the substantial progress in the performance of blue Pe LEDs based on different blue perovskite candidates,and recent advances from three aspects(i.e.,the sky-blue,pure-blue,and deep-blue light emissions).Then,we point out several challenges existing in deep-blue Pe LEDs,such as the effect of Cl-ions incorporation,spectral instability,ion migration,and the difficulty of charge injection,and highlight the strategies to improve device efficiency,to motivate further research and development of blue Pe LEDs.

Efficiency of Blue Organic Light-emitting Diodes Enhanced by Employing an Exciton Feedback Layer

We report that a novel exciton feedback effect is observed by introducing the bis（2-methyl-8-quinolinolato）（4- phenylphenolato）Muminum （BAlq） inserted between the emitting layer （EML） and the electron transporting layer in blue organic light emitting diodes. As an exciton feedback layer （EFL）, the BAlq does not act as a traditional hole blocking effect. The design of this kind of device structure can greatly reduce excitons＇ quenching due to accumulated space charge at the exciton formation interface. Meanwhile, the non-radiative energy transfer from EFL to the EML can also be utilized to enhance the excitons＇ formation, which is confirmed by the test of photolumimescent transient lifetime decay and electroluminescence enhancement of these devices. Accordingly, the optimal device presents the improved performances with the maximum current efficiency of 4.2 cd/A and the luminance of 24600cd/m2, which are about 1.45 times and 1.75 times higher than those of device A （control device） without the EFL, respectively. Simultaneously, the device shows an excellent color stability with a tiny offset of the CIE coordinates （△x = ±0.003, △y = ±0.004） and a relatively lower efficiency roll-off of 26.2% under the driving voltage varying from 3 V to 10 V.

Study on Properties of Blue-Brick Masonry Materials for Historical Buildings

There are a large number of historic buildings which were mainly made of blue-brick masonry in today’s world.However,for the natural and man-made reasons,these historic buildings have been damaged in different degrees.In order to protect historic buildings more scientifically and learn about the preservation state of existing historic buildings,it is necessary to ascertain the material properties of blue brick in historic buildings.The article takes the blue bricks of historical buildings in Kaifeng area of the Central Plains as an example to study.Through the analysis of physical properties,X-ray fluorescence spectroscopy,X-ray diffraction and scanning electron microscopy of blue brick specimens,the physical properties such as the apparent density,moisture content,porosity,and material structure composition are understood.The results show that the apparent density of blue brick is 1.64 g/cm^(3),the moisture content is 10.23%,the 24 h atmospheric water absorption is 17.86%,and the porosity is 20.99%.The smaller the apparent density is,the larger the porosity is,and the water absorption performance is better.From the microscopic point of view,bonding ability between blue brick mineral particles is relatively weak.The pores between skeletons are large and the pore structure is obvious.From the perspective of material phase,the elements of blue brick are mainly O,Si,Al,Fe,and the composition of blue brick is mainly composed of quartz and feldspar.The softening coefficient of blue brick is 0.80,and the deformation and stability of the structure should be paid special attention in the rainy season or wet environment.Through the frost test,there are salt substances in the internal pores of the brick,and the surface of the blue brick is eroded and pulverized.In this paper,the experimental process and analysis methods for testing the material properties of blue brick can provide reference for the research on the material properties of the same kind of blue-brick masonry in historic buildings and masonry relics.The relevant material property parameters obtained in this paper can provide guidance for making protection schemes and scientific repairs for historic buildings in Central China,enrich the evaluation criteria for maintaining and reinforcing historic buildings,and provide theoretical support for studying the damage and health detection technology related to historic buildings.

A Method to Obtain Auger Recombination Coefficient in an InGaN-Based Blue Light-Emitting Diode

We propose and demonstrate to derive the Auger recombination coefficient by fitting efficiency-current and carrier lifetime-current curves simultaneously, which can minimize the uncertainty of fitting results. The obtained Auger recombination coefficient is 1.0x10(-31) cm(6)s(-1) in the present sample, which contributes slightly to efficiency droop effect.

Enhanced light extraction of GaN-based light-emitting diodes with periodic textured SiO_2 on Al-doped ZnO transparent conductive layer

We report an effective enhancement in light extraction of Ga N-based light-emitting diodes（LEDs） with an Al-doped Zn O（AZO） transparent conductive layer by incorporating a top regular textured SiO2 layer. The 2 inch transparent throughpore anodic aluminum oxide（AAO） membrane was fabricated and used as the etching mask. The periodic pore with a pitch of about 410 nm was successfully transferred to the surface of the SiO2 layer without any etching damages to the AZO layer and the electrodes. The light output power was enhanced by 19% at 20 m A and 56% at 100 m A compared to that of the planar LEDs without a patterned surface. This approach offers a technique to fabricate a low-cost and large-area regular pattern on the LED chip for achieving enhanced light extraction without an obvious increase of the forward voltage.

Riboflavin Sensitized Photopolymer Materials for Holographic Storage

Riboflavin is employed as the photosensitizer of a novel photopolymer material for holographic recording. This material has a broad absorption spectrum range （more than 200nm） due to the addition of this dye. The experimental results show that our material has high diffraction efficiency and large refractive index modulation. The maximum diffraction efficiency of the photopolymer is about 56%. The digital data pages are stored in this medium and the reconstructed data page has a good fidelity, with the bit-error-ratio of about 1.8 × 10^-4. It is found that the photopolymer material is suitable for high-density volume holographic digital storage.

Synthesis of a Novel Blue- light- emitting Polymer Material Bearing Coumarin Pendants

A novel blue luminescent polymer bearing coumarin pendants was prepared. Its luminescent properties were determined indicating that it had strong blue fluorescent properties and good film formation ability. This novel polymer can be used as a blue organic electroluminescent material (OELM) in organic electroluminescent devices.

Infrared Laser Pumped Green and Blue Laser Emissions from a Single Solid State Material Doped by Rare Earth Ions

The possible ways and progress of infrared or red laser pumped green and blue laser emissions from a single solid state material doped by rare earth ions are outlined. The green and blue lasers realized from infrared laser pumped rare earth doped nonlinear laser crystals by means of self frequency conversion and from infrared laser pumped rare earth doped bulk, fiber and microsphere materials by means of frequency upconversion are introduced in detail. Other kinds of devices and methods are also compared. The typical nonlinear laser crystals such as YAl 3(BO 3) 4, GdAl 3(BO 3) 4, YCa 4O(BO 3) 3 , GdCa 4O(BO 3) 3, and the typical upconversion fluoride fibers are compared and analyzed. The major problems remaining to be solved and the developing trends in the area are also discussed.

A Stable Blue Organic Electroluminescent Material

In order to compare two kinds of blue electroluminescent materials, we have investigated two kinds of blue OLEDs with the similar structrue ITO/CuPc/NPB/JBEM: perylene/Alq/Mg:Ag [device(J)] and ITO/CuPc/NPB/DPVBi: perylene/Alq/Mg:Ag [device(D)]. The difference of luminance and efficiency was not obvious for the two devices. However, there was remarkable difference for their lifetime. The device(J) achieved longer half lifetime of 1035 h at initial luminance of 100 cd/m 2, and that of device(D) was only 255 h. According to their energy level diagrams , the difference of their stability may originate from different host materials in the two devices. It may be attributed to the better thermal stability of JBEM molecules than that of DPVBi. It is shown that JBEM may be a promising blue organic electroluminescent material with great stability.

Luminescent Enhancement of Heterostructure Organic Light-Emitting Devices Based on Aluminum Quinolines

High performance organic light-emitting devices （OLEDs） have been investigated by using fluorescent bis （2-methyl-8-quinolinolato）（para-phenylphenolato）aluminum（BAlq） as an emissive layer on the performance of multicolor devices consisting of N, N＇-bis-（1-naphthyl）-N,N＇diphenyl- 1,1＇-biphenyl-4,4＇- diamine （NPB） as hole transport layer. The results show that the performance of heterostructure blue light-emitting device composed of 8-hydroxyquinoline aluminum （Alq3） as an electron transport layer has been dramatically enhanced. In the case of high performance heterostructure devices, the electroluminescent spectra has been perceived to vary strongly with the thickness of the organic layers due to the different recombination region, which indicates that various color devices composed of identical components could be implemented by changing the film thickness of different functional layers.

Achieving a superior Na storage performance of Fe-based Prussian blue cathode by coating perylene tetracarboxylic dianhydride amine

Fe-based Prussian blue(Fe-PB)cathode material shows great application potential in sodium(Na)-ion batteries due to its high theoretical capacity,long cycle life,low cost,and simple preparation process.However,the crystalline water and vacancies of Fe-PB lattice,the low electrical conductivity,and the dissolution of metal ions lead to limited capacity and poor cycling stability.In this work,a perylene tetracarboxylic dianhydride amine(PTCDA)coating layer is successfully fabricated on the surface of Fe-PB by a liquid-phase method.The aminated PTCDA(PTCA)coating not only increases the specific surface area and electronic conductivity but also effectively reduces the crystalline water and vacancies,which avoids the erosion of Fe-PB by electrolyte.Consequently,the PTCA layer reduces the charge transfer resistance,enhances the Na-ion diffusion coefficient,and improves the structure stability.The PTCA-coated Fe-PB exhibits superior Na storage performance with a first discharge capacity of 145.2 mAh g^(−1) at 100 mA g^(−1).Long cycling tests exhibit minimal capacity decay of 0.027%per cycle over 1000 cycles at 1 A g^(−1).Therefore,this PTCA coating strategy has shown promising competence in enhancing the electrochemical performance of Fe-PB,which can potentially serve as a universal electrode coating strategy for Na-ion batteries.

Chiral thermally activated delayed fluorescence materials for circularly polarized organic light-emitting diodes

Chirality is an important natural characteristic of organic molecules,and chiral organic molecules have shown extensive application in areas such as pharmaceutical development and material science.Benefiting from the ability to achieve circularly polarized luminescence(CPL),chiral luminescent materials have shown potential applications in anti-glare display,optical communication and,3D display,etc.Due to the ability to harvest both singlet and triplet excitons by a fast reverse intersystem crossing process without involving noble metals,chiral thermally activated delayed fluorescence(TADF)materials with point chirality,axial chirality,planar chirality and helical chirality are regarded as the state-of-the-art materials for circularly polarized organic light-emitting diodes(CP-OLEDs).In recent years,the chiral TADF materials and CP-OLEDs have rapidly developed,but unfortunately,the dissymmetry factors(g)are far from the requirement of practical applications.The ideal emitters and devices should have both high efficiency and a g factor,or at least a balance between these two elements.This review gives an overview of recent progress in chiral TADF materials,with a particular focus on the chiral skeleton,CPL property and device performance.Furthermore,the molecular design concept,device structure and methods to improve the g factors of chiral materials and CP-OLEDs are also discussed.

Fabrication of Core-Shell Hydrogel Bead Based on Sodium Alginate and Chitosan for Methylene Blue Adsorption

A novel core-shell hydrogel bead was fabricated for effective removal of methylene blue dye from aqueous solutions.The core,made of sodium alginate-g-polyacrylamide and attapulgite nanofibers,was cross-linked by Calcium ions(Ca^(2+)).The shell,composed of a chitosan/activated carbon mixture,was then coated onto the core.Fourier transform infrared spectroscopy confirmed the grafting polymerization of acrylamide onto sodium alginate.Scanning electron microscopy images showed the core-shell structure.The core exhibited a high water uptake ratio,facilitating the diffusion of methylene blue into the core.During the diffusion process,the methylene blue was first adsorbed by the shell and then further adsorbed by the core.Adsorption tests showed that the coreshell structure had a larger adsorption capacity than the core alone.The shell effectively enhanced the adsorption capacity to methylene blue compared to the single core.Methylene blue was adsorbed by activated carbon and chitosan in the shell,and the residual methylene blue diffused into the core and was further adsorbed.