Assessment of functional prognosis of anterior cruciate ligament reconstruction in athletes based on a body shape index

BACKGROUND A healthy body shape is essential to maintain athletes’sports level.At present,little is known about the effect of athletes’body shape on anterior cruciate ligament reconstruction(ACLR).Moreover,the relationship between body shape and variables such as knee joint function after operation and return to the field has not been well studied.AIM To verify the relationship between a body shape index(ABSI)and the functional prognosis of the knee after ACLR in athletes with ACL injuries.METHODS We reviewed 76 athletes with unilateral ACL ruptures who underwent ACLR surgery in the First Hospital of Shanxi Medical University between 2017 and 2020,with a follow-up period of more than 24 mo.First,all populations were divided into a High-ABSI group(ABSI>0.835,n=38)and a Low-ABSI group(ABSI<0.835,n=38)based on the arithmetic median(0.835)of ABSI values.The primary exposure factor was ABSI,and the outcome indicators were knee function scores as well as postoperative complications.The correlation between ABSI and postoperative knee function scores and postoperative complications after ACLR were analyzed using multifactorial logistic regression.RESULTS The preoperative knee function scores of the two groups were similar.The surgery and postoperative rehabilitation exercises,range of motion(ROM)compliance rate,Lysholm score,and Knee Injury and Osteoarthritis Outcome Score of the two groups gradually increased,whereas the quadriceps atrophy index gradually decreased.The knee function scores were higher in the Low-ABSI group than in the High-ABSI group at the 24-mo postoperative follow-up(P<0.05).In multifactorial logistic regression,ABSI was a risk factor of low knee joint function score after surgery,specifically low ROM scores(odds ratio[OR]=1.31,95%confidence interval[CI][1.10-1.44];P<0.001),low quadriceps atrophy index(OR=1.11,95%CI[0.97-1.29];P<0.05),low Lysholm scores(OR=2.34,95%CI[1.78-2.94];P<0.001),low symptoms(OR=1.14,95%CI[1.02-1.34];P<0.05),low activity of daily living(OR=1.34,95%CI[1.18-1.65];P<0.05),low sports(OR=2.47,95%CI[1.78-2.84];P<0.001),and low quality of life(OR=3.34,95%CI[2.88-3.94];P<0.001).ABSI was also a risk factor for deep vein thrombosis of the lower limb(OR=2.14,95%CI[1.88-2.36],P<0.05]and ACL recurrent rupture(OR=1.24,95%CI[0.98-1.44],P<0.05)after ACLR.CONCLUSION ABSI is a risk factor for the poor prognosis of knee function in ACL athletes after ACLR,and the risk of poor knee function after ACLR,deep vein thrombosis of lower limb,and ACL recurrent rupture gradually increases with the rise of ABSI.

Theoretical description of drawing body shape in an inclined seam with longwall top coal caving mining

Understanding the characteristics of drawing body shape is essential for optimization of drawing parameters in longwall top coal caving mining.In this study,both physical experiments and theoretical analysis are employed to investigate these characteristics and derive a theoretical equation for the drawing body shape along the working face in an inclined seam.By analyzing the initial positions of drawn marked particles,the characteristics of the drawing body shape for different seam dip angles are obtained.It is shown that the drawing body of the top coal exhibits a shape-difference and volume-symmetry characteristic,on taking a vertical line through the center of support opening as the axis of symmetry,the shapes of the drawing body on the two sides of this axis are clearly different,but their volumes are equal.By establishing theoretical models of the drawing body in the initial drawing stage and the normal drawing stage,a theoretical equation for the drawing body in an inclined seam is proposed,which can accurately describe the characteristics of the drawing body shape.The shape characteristics and volume symmetry of the drawing body are further analyzed by comparing the results of theoretical calculations and numerical simulations.It is shown that one side of the drawing body is divided into two parts by an inflection point,with the lower part being a variation development area.This variation development area increases gradually with increasing seam dip angle,resulting in an asymmetry of the drawing body shape.However,the volume symmetry coefficient fluctuates around 1 for all values of the seam dip angle variation,and the volumes of the drawing body on the two sides are more or less equal as the variation development volume is more or less equal to the cut volume.Both theoretical calculations and numerical simulations confirm that the drawing body of the top coal exhibits the shape-difference and volume-symmetry characteristic.

An Objective Measure to Evaluate Actual Body Shape among Children and Adolescents in China

Objective The purpose of this study was to explore an objective measure to assess actual body shape of children and adolescents in China. Methods Based on the Chinese National Survey on Student＇s Constitution and Health （CNSSCH） in 2005, 210 927 children and adolescents＇ （7-18 years） body height, body weight, chest circumference, sitting height, chest circumference-height ratio, chest circumference-sitting height ratio, chest circumference-low limb ratio, and sitting height-low limb ratio measurements were used to develop an objective measure by using transformation variables and explored factor analysis （EFA）. Discrimination power of the objective measure was evaluated based on BMI reference and Receiver Operating Characteristic curves （ROC）. Results The objective measure included four dimensions scores：transverse dimension （TD） indicating weight and chest circumference; length dimension （LD） indicating height and sitting height;transverse-length ratio dimension （TLD） indicating chest circumference-height ratio, chest circumference-sitting height and chest circumference-low limb ratio; proportion dimension （PD） indicating sitting height-low limb ratio. The whole dimension （WD） indicating the whole body shape was showed by the average of four dimensions scores. Four dimensions and WD scores were approximately 80 in children and adolescents with normal weight, and higher than those of overweight, obesity, and underweight （all P-values〈0.001）. Areas under ROC of overweight and obesity compared with normal weight ranged from 0.88 to 1.00 for scores of TD, TLD, and WD. Conclusion The objective measure which included four dimensions was explored, and TD, TLD, and WD had significant discrimination power.

Classification of Young Females' Body Shape in Jiaodong Area Based on 3D Morphological Characteristics

To improve the classification method of body type, 103 young female college students in Jiaodong area(Shandong, China) were measured by a 3 D body scanning system, and variables of upper body parts were selected and analyzed by SPSS software. According to the indices such as the chest ratio, the chest sagittal diameter ratio, and the shoulder angle, the tested population was quickly clustered into six categories by the classification method of “size feature+shape index+front and back indices”, which were divided into flat chest body, graceful body, breast augmentation body, normal body, convex back body, and flat body. The proportion of various body types and classification rules were obtained. According to the classification rules, 103 samples and 15 new females’ body data were analyzed and verified. Finally, according to the descriptive statistical analysis of upper body-related indicators of young female in this area, the height and the chest circumference were selected as independent variables, regression analysis was carried out on 11 related indicators, and the mapping relationship between height and chest circumference was studied, which provided a mathematical model for the design of fit clothing structure of young females in Jiaodong area.

Genome-wide association study identifies loci for body shape in the large yellow croaker(Larimichthys crocea)

The large yellow croaker(Larimichthys crocea)is an important maricultured fish species in southeast China.Body shape is an important economic trait for this species,because consumers prefer to purchase fish that have a slender shape.Furthermore,investigating the genetic basis of this trait may be useful for understanding the evolution of fish body shape in general.This study randomly selected 500 large yellow croakers to perform genome-wide association study of this trait.We used Genotyping-By-Sequencing technology combined with a genome-wide prediction model(BayesC)to identify and test QTLs.We also compared the association results using BayesC and single-marker analysis,and found that BayesC outperformed single-marker analysis in detecting significant SNPs explaining a proportion of the total genetic variance in this experiment.Using 124,419 SNP markers,10 candidate genes,correspond to 4 QTL regions located around 3.5,1.8,23.9 and 10.8 Mb on chromosomes 2,4,8 and 22 respectively,were suggested to be relevant to the trait.All of these genes may directly or indirectly participate in bone development.These genes may provide a valuable reference for marker-assisted selective breeding and investigating the genetic basis of the evolution of fish body shape.

Impact of environmental factors on the body shape variation and sexual shape dimorphism in Carabus granulatus L.(Coleoptera:Carabidae)

Despite plenty of data in insects shape variation, papers on environmental factors effect on such variation are scarce and in ground beetles are practically absent. The aim of this research was to： （i） model the effect of the region of habitation, urbanization and habitat vegetation into the shape variation in widespread carabid species; （ii） describe sexual shape dimorphism in studied species. Samples were pitfall trapped in different regions of its area in the spectrum of anthropogenic influence （cities, suburbs, natural biotopes）. One thousand and one hundred sixty-eight specimens were analyzed for six morphometric traits and terminal points of those measurements were used as landmarks for Procrustes analysis. We used linear models to reveal which factor （region, urbanization or vegetation） and in what direction affected beetles shape. Results showed that males in C. granulatus had more convex elytra and head, and the more convex in apical-basal direction pronotum. In its area from the east to the west elytra flattened in medial-distal direction and pronotum flattened in apical-distal direction. In disturbed urban environment beetles pronotum became more convex in both sexes and males elytra became more convex too. In open habitats （meadows, lawns） beetles became more flattened.

NUMERICAL ANALYSIS OF NONLINEAR WAVE FORCE ON LARGE BODY WITH ARBITRARY SHAPE

In this paper a nonlinear diffraction theory due to Stoke's 2nd-order wave for computing the wave force on the large body is presented. The radiation condition as r-∞ for 2nd-order scattered potential has been studied in connection with asymptotic solutions. A numerical procedure has been developed for the purpose of calculating the nonlinear wave force on the large body with arbitrary shape.

Constitution identification model in traditional Chinese medicine based on multiple features

Objective To construct a precise model for identifying traditional Chinese medicine(TCM)constitutions;thereby offering optimized guidance for clinical diagnosis and treatment plan-ning;and ultimately enhancing medical efficiency and treatment outcomes.Methods First;TCM full-body inspection data acquisition equipment was employed to col-lect full-body standing images of healthy people;from which the constitutions were labelled and defined in accordance with the Constitution in Chinese Medicine Questionnaire(CCMQ);and a dataset encompassing labelled constitutions was constructed.Second;heat-suppres-sion valve(HSV)color space and improved local binary patterns(LBP)algorithm were lever-aged for the extraction of features such as facial complexion and body shape.In addition;a dual-branch deep network was employed to collect deep features from the full-body standing images.Last;the random forest(RF)algorithm was utilized to learn the extracted multifea-tures;which were subsequently employed to establish a TCM constitution identification mod-el.Accuracy;precision;and F1 score were the three measures selected to assess the perfor-mance of the model.Results It was found that the accuracy;precision;and F1 score of the proposed model based on multifeatures for identifying TCM constitutions were 0.842;0.868;and 0.790;respectively.In comparison with the identification models that encompass a single feature;either a single facial complexion feature;a body shape feature;or deep features;the accuracy of the model that incorporating all the aforementioned features was elevated by 0.105;0.105;and 0.079;the precision increased by 0.164;0.164;and 0.211;and the F1 score rose by 0.071;0.071;and 0.084;respectively.Conclusion The research findings affirmed the viability of the proposed model;which incor-porated multifeatures;including the facial complexion feature;the body shape feature;and the deep feature.In addition;by employing the proposed model;the objectification and intel-ligence of identifying constitutions in TCM practices could be optimized.

Body Classification Based on Adaptive Made-to-Measure( MTM ) Framework

The purpose of this paper was to develop a reliable body shape analysis approach based on cluster analysis, k. nearestneighbor( KNN), and multi-class support vector machine( MSVM). Firstly,a total of 357 Chinese men were selected to make a dataset. Secondly, the experiences of these data were not accumulated to build general models. Five body angles were extracted as independent variables. Four clusters were the most efficient cluster number for our study. Finally,the accuracy of body classifications is compared between KNN and MSVM. In this study,the body classification framework was studied to transfer the body feature data to intuitive types. Moreover,the adaptive made-tomeasure( MTM) framework based on body classification was studied. The case demonstration and analysis show the effectiveness of the study.

New Rotative Radiofrequency Technology: A Multicenter Retrospective Study on Efficacy and Safety

Background: Non-ablative radiofrequency (RF) technology is widely used for the treatment of signs of aging, skin laxity, localized fat and cellulite. However, many RF devices suffer from technical limitations that make the results highly dependent on the user’s experience or clinical limitations that compromise safety, efficacy and comfort. Objective: To evaluate the efficacy and safety of a novel semi-automatic non-ablative RF device for skin tightening, body shaping and cellulite reduction. Materials and methods: A retrospective multicenter study was performed using a novel rotative RF device with temperature and impedance control (Sculpt&Shape®, Sinclair, Spain). 58 subjects underwent a minimum of 4 treatments every 1-2 weeks. A total of 120 treatments (56.7% body and 43.3% facial) and 1034 sessions were performed. Efficacy was evaluated by 3 researchers using the Global Aesthetic Improvement Scale (GAIS) and anthropometric measurements were collected. Subject and practitioner satisfaction were recorded. Safety was evaluated by analyzing the perception of pain during the treatment and the side and adverse effects immediately after treatment and over the next 48 hours. Results: Between 25% and 50% improvement was achieved according to the GAIS. Statistically significant (p < 0.01) abdominal fold reduction of 5.1 mm and circumference reduction of 32.0 mm, 16.4 mm and 13.9 mm were recorded for the abdomen, legs and arms, respectively. 77.5% of subjects and 94.9% of practitioners were either satisfied or very satisfied. Minor adverse effects were found in 0.97% of the sessions. Conclusion: This novel semi-automatic rotative RF device has been found to provide treatments that are effective, safe and comfortable for both practitioners and subjects. .

Classifying Abdominal Fat Distribution Patterns byUsing Body Measurement Data

This study aims to explore new categorization that characterizes the distribution clusters of visceral and subcutaneous adipose tissues(VAT and SAT)measured by magnetic resonance imaging(MRI),to analyze the relationship between the VAT-SAT distribution patterns and the novel body shape descriptors(BSDs),and to develop a classifier to predict the fat distribution clusters using the BSDs.In the study,66 male and 54 female participants were scanned by MRI and a stereovision body imaging(SBI)to measure participants’abdominal VAT and SAT volumes and the BSDs.A fuzzy c-means algorithm was used to form the inherent grouping clusters of abdominal fat distributions.A support-vector-machine(SVM)classifier,with an embedded feature selection scheme,was employed to determine an optimal subset of the BSDs for predicting internal fat distributions.A fivefold cross-validation procedure was used to prevent over-fitting in the classification.The classification results of the BSDs were compared with those of the traditional anthropometric measurements and the Dual Energy X-Ray Absorptiometry(DXA)measurements.Four clusters were identified for abdominal fat distributions:(1)low VAT and SAT,(2)elevated VAT and SAT,(3)higher SAT,and(4)higher VAT.The cross-validation accuracies of the traditional anthropometric,DXA and BSD measurements were 85.0%,87.5% and 90%,respectively.Compared to the traditional anthropometric and DXA measurements,the BSDs appeared to be effective and efficient in predicting abdominal fat distributions.

Fractal Features and Computer Simulation of Fan-Shaped Sedimentary Bodies in Faulted Basins

Ｆａｎ－ｓｈａｐｅｄｓｅｄｉｍｅｎｔａｒｙｂｏｄｉｅｓａｒｅｔｈｏｓｅｍａｉｎｌｙｃｏｍ－ｐｏｓｅｄｏｆｔｅｒｉｇｅｎｏｕｓｃｏａｒｓｅｄｅｐｏｓｉｔｓａｎｄｂｅｉｎｇｆａｎ－ｓｈａｐｅｄｉｎｍｏｒｐｈｏｌｏｇｙ，ｉｎｃｌｕｄｉｎｇａｌｕｖｉａｌｆａ...

Advances in the research and application of high-intensity focused electromagnetic technology for fat apoptosis and body shaping

With improvements in living standards and advancements in medical technology,the demand for fat reduction and body shaping is increasing.Non-invasive fat reduction and body shaping therapy has gradually become a research hotspot in plastic surgery.High-intensity electromagnetic technology,a non-invasive treatment that can reduce subcutaneous fat and strengthen muscle,has been increasingly applied in clinics in recent years.This article reviews the fat reduction and body shaping mechanism and clinical effects of this equipment and provides a reference for its clinical application.

Relationship between intraocular pressure and parameters of obesity in ocular hypertension

AIM:To evaluate the correlation between intraocular pressure(IOP)and various obesity-related health factors in patients with ocular hypertension in Korea.METHODS:A total of 40850 subjects underwent age,sex,body weight,and height assessments and automated multiphasic tests,including non-contact tonometry,automated perimetry,fundus photography,systolic/diastolic blood pressure measurement,and evaluation of obesity-related health parameters such as obesity index,body mass index(BMI),a body shape index(ABSI),and waist-to-height ratio(WtHR).Subjects were divided into ocular hypertension group and normal IOP group according to IOP after matching of age and sex.RESULTS:Of 40850 participants,1515(3.7%)had ocular hypertension,and 1515 with normal IOP were selected as controls using propensity score matching.The mean IOP of control group was 15.3±2.3 mm Hg,compared with 23.3±1.6 mm Hg in ocular hypertension group.Height,obesity index,BMI,and WtHR in the ocular hypertension group were significantly higher than in the normal IOP group(P<0.001,P<0.001,P=0.009,P=0.002).IOP of ocular hypertension was positively correlated with obesity index(P=0.027)and BMI(P=0.016),whereas IOP of control was positively correlated with blood pressure(P<0.001,P=0.002),obesity index(P<0.001),BMI(P<0.001),and WHtR(P=0.002).Systolic blood pressure(β=0.022,P<0.001)and body weight(β=0.016,P=0.02)were precursors of IOP in normal subjects,but sex(male;β=-0.231,P=0.008)and obesity index(β=-0.007,P=0.017)were precursors of ocular hypertension according to multiple regression analysis.CONCLUSION:Among various obesity-related health parameters,obesity index is the best indicator for further increase in IOP in ocular hypertension group.

Ethnography of Women＇ s Perception of Their Workwear： Comparative Study between South Afi＇ica and Uganda

The study investigates women＇s perception of the workwear, and their awareness about how garment fit can affect one＇s body image. Drawing on the theory of practice, we propose an ethnographic account of women＇s perception of workwear and their preferred alternative. The study presents a comparative perspective of attitudes, and perceptions about the workwear of women in South Africa and Uganda explored through the habitus. We present pro-vocal recollections of women perceptions on the current workwear ideal for men which omits women＇ body physique. In particular, from the current personal protective equipment （PPE）, we examine ＂the overall＂ common attire at site and an integral part of the PPE. Overalls are designed following the men＇s physique, and women in work place are subjected to put them on yet, differences in body structure/shapes amongst women, namely, hour glass, bottom hourglass, spoon, and pear shape, are hardly considered. The identification of different female body shapes is made possible through the 3D anthropometric measurements using a Three Dimensional （3D） Body Scanner （TC2）. We develop endogenous explanations of what women would want to see as workwear based on the understanding of women found on site in men＇s workwear or without any work weal- in South Africa and Uganda. Using ethnographic design approach, we capture voices of 10 women from South Africa and Uganda through participant observation and unstructured interviews. We analyze data thematically to determine the patterns of their responses toward an appropriate workwear. Moreover, we （re）construct these responses into possible design models that would be ideal workwear for women, which gives them the pride, respect, dignity, and confidence as women.

Plate Shape Control Theory and Experiment for 20-high Mill

Roll flattening theory is an important part of plate shape control theories for 20-high mill. In order to improve the accuracy of roll flattening calculation for 20-high mill, a new and more accurate roll flattening model was proposed. In this model, the roll barrel was considered as a finite length semi-infinite body. Based on the boundary integral equation method, the numerical solution of the finite length semi-infinite body under the distributed force was obtained and an accurate roll flattening model was established. Coupled with roll bending model and strip plastic deformation, a new and more accurate plate control model for 20-high mill was established. Moreover, the effects of the first intermediate roll taper angle and taper length were analyzed. The tension distribution calculated by analytical model was consistent with the experimental results.

Surface area-volume ratios in insects

Body mass, volume and surface area are important for many aspects of the physiology and performance of species. Whereas body mass scaling received a lot of attention in the literature, surface areas of animals have not been measured explicitly in this context. We quantified surface area-volume （SA/V） ratios for the first time using 3D surface models based on a structured light scanning method for 126 species of pollinating insects from 4 orders （Diptera, Hymenoptera, Lepidoptera, and Coleoptera）. Water loss of 67 species was measured gravimetrically at very dry conditions for 2 h at 15 and 30 ℃ to demonstrate the applicability of the new 3D surface measurements and relevance for predicting the performance of insects. Quantified SA/V ratios significantly explained the variation in water loss across species, both directly or after accounting for isometric scaling （residuals of the SA/V - mass2/3 relationship）. Small insects with a proportionally larger surface area had the highest water loss rates. Surface scans of insects to quantify allometric SA/Vratios thus provide a promising method to predict physiological responses, improving the potential of body mass isometry alone that assume geometric similarity.

NUMERICAL STUDY OF FLOW AROUND AN OSCILLATING DIAMOND PRISM AND CIRCULAR CYLINDER AT LOW KEULEGAN-CARPENTER NUMBER

In order to identify the influence of shape comers on the instantaneous forces in the case of oscillating bodies, the simula- ted flow field is compared for two kinds of cross sections： diamond prism and circular cylinder. For these two flow configurations, the same Reynolds number and a Keulegan-Carpenter are considered. To compute the dynamic flow field surrounding the body, the Navier-Stokes transport equations in a non-inertial reference frame attached to the body are considered. Hence, a source term is added locally to the momentum equation to take into account the body acceleration. The proposed model is solved using the PHOENICS code. For the oscillating circular cylinder, the simulated results are in good agreement with the experimental data availa- ble in the litterature. After validation of this proposed model, flow field for diamond prism is determined. For both bodies, the pro- cess of the vortex formation is similar, with the formation of a recirculation zone in the near-wake containing a symmetric pair of vortices of equal strength and opposite rotation. The length of recirculation zone varies approximately linearly with time. However, the in-line force coefficient of the oscillating diamond prism is found to be greatest, since the recirculation zone is longer compared with that of the oscillating circular cylinder.

Patterns of morphometric variation in the alpine newt (Mesotriton alpestris) at the southern limit of its distribution: environmental correlates

We applied multivariate analyses to an array of body measures of alpine newt specimens derived from 11 localpopulations in Greece to describe, analyse and detect patterns and putative causes of within-population andamong-population morphometric variation. The observed morphometric variation was partitioned into several independentlyvarying aspects of the external phenotype, frequently following variation patterns in different environmentalfactors. The size and features of the aquatic habitat were found to affect body size, while altitude was foundto affect head-shape variation in both sexes. At the intra-population level, variation in generalized body size andshape was found to be significantly lower when competitive newt species were present in the habitat, indicatingstabilizing selection towards a decrease in inter-specific competition. No clear discrimination on body size andshape proportions was detected between the two genetic lineages examined, implying ecogenetic or environmentallyinduced variation rather than phylogeny.