Feasibility Analysis on the Integrated Application of Solar Energy, Biogas, Coal-fired Boiler and Radiant Floor Heating for Rural Residence

The feasibility of adopting a balanced energy mix mode (domestic solar energy, biogas, coal-fired boiler and radiant floor heating) was proposed. Taking a typical rural residence in Zhengzhou City for example, the study through theoretical analysis and calculation showed that such a balanced energy mix is an economic way and efficient in saving energy and reducing air pollution, and elaborated the theoretical feasibility of popularizing such a heat supply mode in rural areas.

Application and Research of 5G Communication Technology in Intelligent Coal Mine

In recent years,science and technology in China has been developing rapidly,and various industries have begun to undergo changes due to the development.Coal mining i a highly dangerous industry.Therefore,proper technology is needed to improve the quality and safety of coal mining.The application of 5G communication technology allowed for the developement of intelligent coal mines,with broad appication prospects and research value.This article aims to thoroughly analyze the application of 5G ommunication technology in intelligent coal mines,considering the practical context.The goal is to offer insights and guidance for future endeavors in this domain.

Research on the Application of Virtual Simulation Technology in the Safety Management of Coal Mining

Safety is paramount in coal mining as it affects efficiency.Thus,it is essential to enhance the management of coal mine safety.With the ongoing advancement of modern technologies,more innovative solutions are being integrated into the safety management of coal mining,including virtual simulation technology.This paper focuses on analyzing and researching the application of virtual simulation technology in the safety management of coal mining,providing insights for reference.

Environmental performance assessments of different methods of coal preparation for use in small-capacity boilers: experiment and theory

The purpose of this article is to receive environmental assessments of combustion of different types of coal fuel depending on the preparation(unscreened,size-graded,briquetted and heat-treated)in automated boilers and boilers with manual load-ing.The assessments were made on the basis of data obtained from experimental methods of coal preparation and calculated methods of determining the amount of pollutant and greenhouse gas emissions,as well as the mass of ash and slag waste.The main pollutants from coal combustion are calculated:particulate matter,benz(a)pyrene,nitrogen oxides,sulfur dioxide,carbon monoxide.Of the greenhouse gases carbon dioxide is calculated.As a result of conducted research it is shown that the simplest preliminary preparation(size-graded)of coal significantly improves combustion efficiency and environmental performance:emissions are reduced by 13%for hard coal and up to 20%for brown coal.The introduction of automated boil-ers with heat-treated coal in small boiler facilities allows to reduce emissions and ash and slag waste by 2-3 times.The best environmental indicators correspond to heat-treated lignite,which is characterized by the absence of sulfur dioxide emissions.

Research and practice of intelligent coal mine technology systems in China

This study considered the role of coal as China’s basic energy source and examines the development of the coal industry.We focused on the intelligent development of coal mines,and introduced the“Chinese mode”of intelligent mining in underground coal mines,which uses complete sets of technical equipment to propose classifcation and grading standards.In view of the basic characteristics and technical requirements of intelligent coal mine systems,we established a digital logic model and propose an information entity and knowledge map construction method.This involves an active information push strategy based on a knowledge demand model and an intelligent portfolio modeling and distribution method for collaborative control of coal mines.The top-level architecture of 5G+intelligent coal mine systems combines intelligent applications such as autonomous intelligent mining,human–machine collaborative rapid tunneling,unmanned auxiliary transportation,closed-loop safety control,lean collaborative operation,and intelligent ecology.Progress in intelligent mining technology was described in terms of a dynamic modifed geological model,underground 5G network and positioning technology,intelligent control of the mining height and straightness of the longwall working face,and intelligent mining equipment.The development of intelligent coal mines was analyzed in terms of its imbalances,bottlenecks,and the compatibility of large-scale systems.Implementation ideas for promoting the development of intelligent coal mines were proposed,such as establishing construction standards and technical specifcations,implementing classifcation and grading standards according to mining policy,accelerating key technology research,and building a new management and control model.

Development of 600 MW Class Coal Fired Boilers in China

This article introduces the present status anddevelopment of 600 MW class boilers in China. The statisticaldata indicate that most 600 MW generating units experiencedrelatively length" growing up" period. In this period, unitscould not operate stably , their unplanned outage times weremany and durations long, and availabilities low. On the basis oftesting and research and the summing-up of practice, it wasindicated slagging in the furnace, deviation of tine gas energy atthe exit of furnace, and overheating bursting of superheater andreheater etc, endangering the safety and economics ofoperation,main problems could be completely alleviated oravoided through design and type selection of boiler furnace andburners, coal characteristics and coal handling management,and optimization management of operation conditions etc.

Sliding Mode Predictive Control of Main Steam Pressure in Coal-fired Power Plant Boiler

Since the combustion system of coal-fired boiler in thermal power plant is characterized as time varying, strongly coupled, and nonlinear, it is hard to achieve a satisfactory performance by the conventional proportional integral derivative (PID) control scheme. For the characteristics of the main steam pressure in coal-fired power plant boiler, the sliding mode control system with Smith predictive structure is proposed to look for performance and robustness improvement. First, internal model control (IMC) and Smith predictor (SP) is used to deal with the time delay, and sliding mode controller (SMCr) is designed to overcome the model mismatch. Simulation results show the effectiveness of the proposed controller compared with conventional ones.

Computational Study on Furnace Process in a Multi-burner Boiler of Pulverized Coal Fired Tangentially at Four Corners

Aiming at the optimization of the operation condition, a general numerical method for calculating pulverized coal combustion in a full scale furnace fired tangentially at four corners is adopted. “ k ε ” turbulence model is used for the gas phases and a stochastic approach based on the Lagrangian technique is used for particle phases. Two competing reactions model for the coal devolatilization and PDF (the probability density function) method for the combustion of the gas phases are employed. In the numerical simulations, assuming the air distribution of second port level is of pagoda, waist drum and uniform type. The results show that pagoda type air distribution is advantageous to ignition and smooth combustion of pulverized coal, and suitable to inferior coal combustion in practice. In the present furnace, the igniting distance at 1st and 3rd corner is longer than that at 2nd and 4th corner. The results from numerical calculations are in good agreement with those of observed in practice.

INTRODUCTION TO INCONEL ALLOY 740: AN ALLOY DESIGNED FOR SUPERHEATER TUBING IN COAL-FIRED ULTRA SUPERCRITICAL BOILERS

Chinese utilities as well as those worldwide are facing increased demand for additional electricity, reduced plant emissions and greater efficiency. To meet this challenge will require increasing boiler temperature, pressure and coal ash corrosion resistance of the materials of boiler construction of future coal-fired boilers. A new nickel-based tube alloy, INCONEL^R alloy 740, is described aiming at meeting this challenge. Emphasis will be on describing the alloy＇ s mechanical properties, coal-ash and steam corrosion resistance. Microstructural stability as a function of temperature and time is addressed as well as some of the early methodology em- ployed to arrive at the current chemical composition.

Two-stage numerical simulation for temperature profile in furnace of tangentially fired pulverized coal boiler

Considering the fact that the temperature distribution in furnace of a tangential fired pulverized coal boiler is difficult to be measured and monitored, two-stage numerical simulation method was put forward. First, multi-field coupling simulation in typical work conditions was carried out off-line with the software CFX-4.3, and then the expression of temperature profile varying with operating parameter was obtained. According to real-time operating parameters, the temperature at arbitrary point of the furnace can be calculated by using this expression. Thus the temperature profile can be shown on-line and monitoring for combustion state in the furnace is realized. The simul-(ation) model was checked by the parameters measured in an operating boiler, (DG130-9.8/540.) The maximum of relative error is less than 12% and the absolute error is less than 120℃, which shows that the proposed two-stage simulation method is reliable and able to satisfy the requirement of industrial application.

Equation of Radiation Heat Transfer in Multiple Combustion Boiler Furnace of Fluidized Bed and Pulverized Coal Firing

The equation for radiation heat transfer in a multiple combustion boiler furnace with nuidized bed and pulverized coal firing is derived from direct calculation of radiation heat transfer.

Discussion on Selection of Pulverizer and Moisture of Pulverized Coal for Lignite Boilers

In China,the abrasion index and the free moisture are regarded as the criteria for determining whether the medium-speed pulverizer or the fan pulverizer could be selected.Based on comprehensive studies on foreign methods for choosing the pulverizing system for lignite boilers,it is suggested that the particle size of coal,the drying time,the drying temperature and the humidity should be taken into account when measuring the free moisture of lignite,and the total moisture could also be the principle for type selection of pulverizer for lignite boilers.Furthermore,the determination of pulverized-coal moisture has great influence on the running of pulverizing systems.The actual moisture of certain pulverized coals is compared with that calculated with different methods and a feasible method for determining the moisture of the pulverized coal is suggested.

Influence of Recirculated Flue Gas Distribution on Combustion and NOx Formation Characteristics in S-CO_(2) Coal-fired Boiler

Supercritical carbon dioxide(S-CO_(2))Brayton power cycle power generation technology,has attracted more and more scholars'attention in recent years because of its advantages of high efficiency and flexibility.Compared with conventional steam boilers,S-CO_(2) has different heat transfer characteristics,it is easy to cause the temperature of the cooling wall of the boiler to rise,which leads to higher combustion gas temperature in the furnace,higher NOX generation concentration.The adoption of flue gas recirculation has a significance impact on the combustion process of pulverized coal in the boiler,and it is the most effective ways to reduce the emission of NOX and the combustion temperature in the boiler.This paper takes 1000MW S-CO_(2) T-type coal-fired boiler as the research target to investigate the combustion and NOX generation characteristics of S-CO_(2) coal-fired boilers under flue gas recirculation condition,the influence of recirculated flue gas distribution along the furnace height on the characteristics of NOX formation and the combustion of pulverized coal.The results show that the recirculated flue gas distribution has the great impact on the concentration of NOX at the boiler outlet.When the bottom recirculation flue gas rate is gradually increased,the average temperature of the lower boiler decreases and the average temperature of the upper boiler increases slightly;The concentration of NOx at the furnace outlet increases.

System Performance and Pollution Emission of Biomass Gas Co-Firing in a Coal-Fired Boiler

To reduce greenhouse gases emission and increase the renewable energy utilization portion in the world, the biomass gasification coupled with a coal-fired boiler power generation system is studied. It is a challenge to achieve optimum performance for the coupled system. The models of biomass gasification coupled with co-firing of coal in a boiler have been established. A comparative study of three kinds of biomass (Food Rubbish, Straw and Wood Pellets) has been done. The syngas produced in a 10 t/h gasifier is fed to a 330 MWe coal-fired boiler for co-combustion, and the co-firing performances have been compared with pure coal combustion case under the conditions of constant boiler load. Results show that co-firing decreases the furnace combustion temperature and raises the flue gas temperature for Food Rubbish and Straw, while, flue gases temperature decrease in case of Wood Pellets. At the same time NOx and SOx emissions have reduced. The system efficiencies at constant load for Food Rubbish, Straw and Wood Pellets are 83.25%, 83.88% and 82.56% when the optimum conditions of gasification and co-firing process are guaranteed.

Features and correct application of coal vitrinite reflectance index

The law of mathematical statistics, which the coal vitrinite reflectance index obeys, the existing vitrinite representing deviations, and the advantages of judging coalification and the shortage of judging coal type were analyzed. The advantages and disadvantages of various determination methods and the expression index and different methods of identifying vitrinite on the determination results were compared. The vitality of coal vitrinite reflectance depends on its full play the unique function of reflectance histogram and the systematic errors between different determination methods do not affect the application based on reflectance histogram are considered.

Vegetation of mono-layer landfill cover made of coal bottom ash and soil by compost application

Monolayer barriers called evapotranspiration (ET) covers were developed as alternative final cover systems in waste landfills but high-quality soil remains a limiting factor in these cover systems. Coal bottom ash was evaluated to be a very good alternative to soil in previous tests and a combination of soil (65% wt.wt-1) and coal bottom ash (35% wt.wt-1) was evaluated to be the most feasible materials for ET cover systems. In our pot test, selected manure compost as soil amendment for the composite ET cover system, which was made of soil and bottom ash at ca. 40 Mg.ha-1 application level was very effective to promote vegetation growth of three plants;namely, garden cosmos (Cosmosbipinnatus), Chinese bushclover (Lespedezacuneata), and leafy lespedeza (Lespedeza cyrtobotrya). To evaluate the effect of compost application on plant growth in an ET vegetative cover system, two couples of lysimeters, packed with soil and a mixture of soil and bottom ash, were installed in a pilot landfill cover system in 2007. Manure composts were applied at the rates of 0 and ?40 Mg.ha-11before sowing the five plant species, i.e.indigo-bush (Amorphafruticosa), Japanese mugwort (Artemisia princeps, Arundinella hirta, Lespedezacuneata, and Lespedezacyrtobotrya). Unseeded native plant (green foxtail,Setaria viridis) was dominant in all treatments in the 1st year after installation while the growth of the sown plants significantly improved over the years. Total biomass productivity significantly increased with manure compost application, and more significantly increased in the composite ET cover made of soil and bottom ash treatment compared to the single soil ET cover, mainly due to more improved soil nutrient levels promoting vegetation growth and maintaining the vegetation system. The use of bottom ash as a mixing material in ET cover systems has a strong potential as an alternative to fine-grained soils, and manure compost addition can effectively enhance vegetative propagation in ET cover systems.

Combustion and Self-Desulfurization Characterization of Blended Low-Rank Coals for Improved Resource Utilization in Fluidized Bed Boilers

The co-combustion of low-rank coals through fluidized bed boiler(CFB)is an effective approach to enhance the level of resource utilization.To date,there has been a lack of investigation concerning the co-combustion kinetics and self-desulfurization characteristics of coal slime,coal gangue,and raw coal.In this study,we adopted multiple model-free and model-fitting methods to comparatively analyze co-combustion kinetics of blended coals on the basis of thermogravimetric data.Then,the sulfur balance and self-desulfurization of blended coals in the co-combustion were intensively investigated using a tube furnace set-up.The results reveal that in the presence of coal gangue in blended coals,the average activation energy(E_(a))falls within the range of 65.7 kJ/mol to 100.4 kJ/mol,as determined by four model-free methods.Conversely,in the absence of coal gangue,only the Flynn-Wall-Ozawa(FWO)and Friedman(FM)methods are deemed appropriate for calculating the average E_(a),yielding a value of 77.3 kJ/mol.The first order reaction model is confirmed to be reliable for analyzing the co-combustion kinetics of low-rank blended coals.Irrespective of the specific composition of the blended coal,a significant linear correlation exists between the Ea and the natural logarithm of the pre-exponential factor(lnA)within an extensive range of parameters.Moreover,the addition of coal gangue to the blended coal substantially enhances the self-desulfurization level,resulting in an increase from 25.7%to60.7%at 1073 K.The self-desulfurization efficiency exhibits a good linear relationship with both the mass ratio of coal gangue to coal slime and the molar ratio of calcium to sulfur.In a practical implementation,the optimal addition ratio of coal gangue is a trade-off between the self-desulfurization efficiency and the ignition capacity.