Chiral bound states in a staggered array of coupled resonators

We study the chiral bound states in a coupled-resonator array with staggered hopping strengths,which interacts with a two-level small atom through a single coupling point or two adjacent ones.In addition to the two typical bound states found above and below the energy bands,this system presents an extraordinary chiral bound state located within the energy gap.We use the chirality to quantify the breaking of the mirror symmetry.We find that the chirality value undergoes continuous changes by tuning the coupling strengths.The preferred direction of the chirality is controlled not only by the competition between the intracell and the intercell hoppings in the coupled-resonator array,but also by the coherence between the two coupling points.In the case with one coupling point,the chirality values varies monotonously with difference between the intracell hopping and the intercell hoppings.While in the case with two coupling points,due to the coherence between the two coupling points the perfect chiral states can be obtained.

Comparison of the Minimum Bounding Rectangle and Minimum Circumscribed Ellipse of Rain Cells from TRMM

Based on the TRMM dataset, this paper compares the applicability of the improved MCE(minimum circumscribed ellipse), MBR(minimum bounding rectangle), and DIA(direct indexing area) methods for rain cell fitting. These three methods can reflect the geometric characteristics of clouds and apply geometric parameters to estimate the real dimensions of rain cells. The MCE method shows a major advantage in identifying the circumference of rain cells. The circumference of rain cells identified by MCE in most samples is smaller than that identified by DIA and MBR, and more similar to the observed rain cells. The area of rain cells identified by MBR is relatively robust. For rain cells composed of many pixels(N> 20), the overall performance is better than that of MCE, but the contribution of MBR to the best identification results,which have the shortest circumference and the smallest area, is less than that of MCE. The DIA method is best suited to small rain cells with a circumference of less than 100 km and an area of less than 120 km^(2), but the overall performance is mediocre. The MCE method tends to achieve the highest success at any angle, whereas there are fewer “best identification”results from DIA or MBR and more of the worst ones in the along-track direction and cross-track direction. Through this comprehensive comparison, we conclude that MCE can obtain the best fitting results with the shortest circumference and the smallest area on behalf of the high filling effect for all sizes of rain cells.

Holevo bound independent of weight matrices for estimating two parameters of a qubit

Holevo bound plays an important role in quantum metrology as it sets the ultimate limit for multi-parameter estimations,which can be asymptotically achieved.Except for some trivial cases,the Holevo bound is implicitly defined and formulated with the help of weight matrices.Here we report the first instance of an intrinsic Holevo bound,namely,without any reference to weight matrices,in a nontrivial case.Specifically,we prove that the Holevo bound for estimating two parameters of a qubit is equivalent to the joint constraint imposed by two quantum Cramér–Rao bounds corresponding to symmetric and right logarithmic derivatives.This weightless form of Holevo bound enables us to determine the precise range of independent entries of the mean-square error matrix,i.e.,two variances and one covariance that quantify the precisions of the estimation,as illustrated by different estimation models.Our result sheds some new light on the relations between the Holevo bound and quantum Cramer–Rao bounds.Possible generalizations are discussed.

Iterative physical optics method based on efficient occlusion judgment with bounding volume hierarchy technology

This paper builds a binary tree for the target based on the bounding volume hierarchy technology,thereby achieving strict acceleration of the shadow judgment process and reducing the computational complexity from the original O(N^(3))to O(N^(2)logN).Numerical results show that the proposed method is more efficient than the traditional method.It is verified in multiple examples that the proposed method can complete the convergence of the current.Moreover,the proposed method avoids the error of judging the lit-shadow relationship based on the normal vector,which is beneficial to current iteration and convergence.Compared with the brute force method,the current method can improve the simulation efficiency by 2 orders of magnitude.The proposed method is more suitable for scattering problems in electrically large cavities and complex scenarios.

Enhancing the Goos-Hänchen shift based on quasi-bound states in the continuum through material asymmetric dielectric compound gratings

Quasi-bound state in the continuum(QBIC)resonance is gradually attracting attention and being applied in Goos-Hänchen(GH)shift enhancement due to its high quality(Q)factor and superior optical confinement.Currently,symmetry-protected QBIC resonance is often achieved by breaking the geometric symmetry,but few cases are achieved by breaking the material symmetry.This paper proposes a dielectric compound grating to achieve a high Q factor and high-reflection symmetry-protectede QBIC resonance based on material asymmetry.Theoretical calculations show that the symmetry-protected QBIC resonance achieved by material asymmetry can significantly increase the GH shift up to-980 times the resonance wavelength,and the maximum GH shift is located at the reflection peak with unity reflectance.This paper provides a theoretical basis for designing and fabricating high-performance GH shift tunable metasurfaces/dielectric gratings in the future.

Optimization of Generator Based on Gaussian Process Regression Model with Conditional Likelihood Lower Bound Search

The noise that comes from finite element simulation often causes the model to fall into the local optimal solution and over fitting during optimization of generator.Thus,this paper proposes a Gaussian Process Regression(GPR)model based on Conditional Likelihood Lower Bound Search(CLLBS)to optimize the design of the generator,which can filter the noise in the data and search for global optimization by combining the Conditional Likelihood Lower Bound Search method.Taking the efficiency optimization of 15 kW Permanent Magnet Synchronous Motor as an example.Firstly,this method uses the elementary effect analysis to choose the sensitive variables,combining the evolutionary algorithm to design the super Latin cube sampling plan;Then the generator-converter system is simulated by establishing a co-simulation platform to obtain data.A Gaussian process regression model combing the method of the conditional likelihood lower bound search is established,which combined the chi-square test to optimize the accuracy of the model globally.Secondly,after the model reaches the accuracy,the Pareto frontier is obtained through the NSGA-II algorithm by considering the maximum output torque as a constraint.Last,the constrained optimization is transformed into an unconstrained optimizing problem by introducing maximum constrained improvement expectation(CEI)optimization method based on the re-interpolation model,which cross-validated the optimization results of the Gaussian process regression model.The above method increase the efficiency of generator by 0.76%and 0.5%respectively;And this method can be used for rapid modeling and multi-objective optimization of generator systems.

Bound State Description of Particles from a Quantum Field Theory of Fermions and Bosons, Compatible with Relativity

Both, the dilemma to find a quantum field theory consistent with Einstein’s law of relativity and the problem to describe existing particles as bound states of matter has been solved by calculating bound state matrix elements from a dual fermion-boson Lagrangian. In this formalism, the fermion binding energies are compensated by boson energies, indicating that particles can be generated out of the vacuum. This yields quantitative solutions for various mesons ω (0.78 GeV) - Υ (9.46 GeV) and all leptons e, μ and τ, with uncertainties in the extracted properties of less than 1‰. For transparency, a Web-page with the address htpps://h2909473.stratoserver.net has been constructed, where all calculations can be run on line and also the underlying fortran source code can be inspected.

CRB600H级箍筋混凝土短柱抗震性能研究

为研究高强箍筋混凝土柱抗震性能,通过对CRB600H级高强箍筋混凝土短柱低周往复加载试验展开数值模拟研究。利用OpenSEES中的Nonlinear Beam Column单元、零长度截面转动弹簧单元和零长度剪切弹簧单元,建立了考虑弯-剪耦合效应的抗震数值分析模型。分析轴压比、剪跨比对CRB600H级箍筋柱的滞回性能、刚度退化、延性及耗能性能的影响,并以HRB400级箍筋柱进行对比分析,结果表明:轴压比越大的构件水平抗剪承载力,延性和耗能能力越差;剪跨比越大构件的水平抗剪承载力越低,延性和耗能能力越好;CRB600H级和HRB400级箍筋柱,两者承载力接近,CRB600H级箍筋柱延性和抗震性能更好。

Discrete vortex bound states with a van Hove singularity in the vicinity of the Fermi level

A theoretical study on discrete vortex bound states is carried out near a vortex core in the presence of a van Hove singularity(VHS) near the Fermi level by solving Bogoliubov–de Gennes(Bd G) equations. When the VHS lies exactly at the Fermi level and also at the middle of the band, a zero-energy state and other higher-energy states whose energy ratios follow integer numbers emerge. These discrete vortex bound state peaks undergo a splitting behavior when the VHS or Fermi level moves away from the middle of the band. Such splitting behavior will eventually lead to a new arrangement of quantized vortex core states whose energy ratios follow half-odd-integer numbers.

Hybrid bound states in the continuum in terahertz metasurfaces

Bound states in the continuum(BICs)have exhibited extraordinary properties in photonics for enhanced light-matter interactions that enable appealing applications in nonlinear optics,biosensors,and ultrafast optical switches.The most common strategy to apply BICs in a metasurface is by breaking symmetry of resonators in the uniform array that leaks the otherwise uncoupled mode to free space and exhibits an inverse quadratic relationship between quality factor(Q)and asymmetry.Here,we propose a scheme to further reduce scattering losses and improve the robustness of symmetry-protected BICs by decreasing the radiation density with a hybrid BIC lattice.We observe a significant increase of radiative Q in the hybrid lattice compared to the uniform lattice with a factor larger than 14.6.In the hybrid BIC lattice,modes are transferred toГpoint inherited from high symmetric X,Y,and M points in the Brillouin zone that reveal as multiple Fano resonances in the far field and would find applications in hyperspectral sensing.This work initiates a novel and generalized path toward reducing scattering losses and improving the robustness of BICs in terms of lattice engineering that would release the rigid requirements of fabrication accuracy and benefit applications of photonics and optoelectronic devices.

Combined load bearing capacity of rigid piles embedded in a crossanisotropic clay deposit using 3D finite element lower bound

In this study,an iterative-based three-dimensional finite element lower bound in association with the second-order cone programming method is adopted to evaluate the limit load of a single pile embedded in cross-anisotropic soils under general loading condition.The lower bound solutions of the pile embedded in an anisotropic soil deposit can be found by formulating the element equilibrium,equilibrium of shear and normal stresses along discontinuities,boundary conditions,yield function,and optimizing the objective function through the second-order cone programming method in conjunction with an iterative-based update procedure.A general loading condition is considered to profile the expansion of the safe load in the vertical-horizontal-moment(V-H-M)space.The results of this study are compared and validated against three different cases including an isotropic lateral loading,anisotropic end bearing capacity,and a pile embedded in an isotropic soil deposit under general loading condition.A parametric study is conducted to evaluate the impact of different influencing factors.It was found that the effect of anisotropy on the variation of lateral limit load of a single pile is more pronounced than the corresponding vertical and bending moment limit loads,whereas the interface properties have more significant effects on the vertical and bending moment limit loads in comparison to the lateral limit load.

Bound lipase:an important form of lipase in rice bran (Oryza sativa)

Rice bran residue possessed a steady lipase activity((26.68 ± 3.69)%)after its endogenous lipase was extracted continuously by phosphate buffer solution(PBS)for 24 h. T herefore, the aim of this research was to explore whether there exist any bound lipases in rice bran(Oryza sativa). Three physical treatments(grinding, homogenizing and ultrasound crush)and 6 enzymatic treatments(cellulase, hemicellulase, pectinase, complex cellulase, glucoamylase and α-amylase)were applied to rice bran in order to investigate this bound lipase. The relative catalytic activities of extraction supernatant and residue for pectinase group were(437.63 ± 22.54)% and(159.26 ± 2.12)%, respectively, which were significantly higher(P < 0.05)than other groups. This phenomenon demonstrated that lipase was the most likely to combine with pectin. Molecular simulation proved that pectin could combine with two rice bran lipases(lipase 315 and lipase 308)and cover the catalytic centers so as to prevent the lipases from encountering the substrate and inhibiting their catalytic activities. During combination, pectin could make the lipases more compact and reduce the solvent accessible surface area of lipases, which would make the lipases inactive to molecular interaction. In summary, part of rice bran lipase was proved to exist in bound form and combined with the pectin.

Li^(+)-ion bound crown ether functionalization enables dual promotion of dynamics and thermodynamics for ambient ammonia synthesis

Electrosynthesis of ammonia from the reduction of nitrogen is still confronted with the limited supply of gas reactant in dynamics as well as high activation barrier in thermodynamics.Unfortunately,despite tremendous efforts devoted to electrocatalysts themselves,they still fail to tackle the above two challenges simultaneously.Herein,we employ a heterogeneous catalyst adlayer-composed of crown ethers associated with Li^(+)ions-to achieve the dual promotion of dynamics and thermodynamics for ambient ammonia synthesis.Dynamically,the bound Li^(+)ions interact with the strong quadrupole moment of nitrogen,and trigger considerable reactant flux toward the catalyst.Thermodynamically,Li^(+)associated with the oxygen of crown ether achieves a higher density of states at the Fermi level for the catalyst,enabling effortless electron transfer from the catalysts to nitrogen and thus greatly reducing the activation barrier.As expected,the proof-of-concept system achieves an ammonia yield rate of 168.5μg h^(-1)mg^(-1)and a Faradaic efficiency of 75.3%at-0.3 V vs.RHE.This system-level approach opens up pathways for tackling the two key challenges that have limited the field of ammonia synthesis.

Pacman Renormalization in Siegel Parameters of Bounded Type

A novel method of renormalization called Pacman renormalization allows us to study (unicritical) Siegel functions through Pacman-type functions. It has been used to investigate the Siegel parameters with combinatorially periodic rotation number in the main cardioid of the Mandelbrot set. It is already known that it can be defined a Pacman renormalization operator such that for Siegel pacmen, with combinatorially periodic rotation numbers, the operator is compact, analytic and has a unique fixed point, at which it is hyperbolic with one-dimensional unstable manifold. In this paper we observe that this Pacman renormalization operator is compact and analytic at any Siegel Pacman or Siegel map with combinatorially bounded rotation number. This allows us to define a renormalization operator on the hybrid classes of the standard Siegel pacmen to which we built its horseshoe where the operator is topologically semiconjugated to the left shift on the space of bi-infinite sequences of natural numbers bounded by some constant.

Fundamentals and applications of photonic waveguides with bound states in the continuum

Photonic waveguides are the most fundamental element for photonic integrated circuits(PICs).Waveguide properties,such as propagation loss,modal areas,nonlinear coefficients,etc.,directly determine the functionalities and performance of PICs.Recently,the emerging waveguides with bound states in the continuum(BICs)have opened new opportunities for PICs because of their special properties in resonance and radiation.Here,we review the recent progress of PICs composed of waveguides with BICs.First,fundamentals including background physics and design rules of a BIC-based waveguide will be introduced.Next,two types of BIC-based waveguide structures,including shallowly etched dielectric and hybrid waveguides,will be presented.Lastly,the challenges and opportunities of PICs with BICs will be discussed.

Lower Bounds of Decay Rates for Solution to the Single-Layer Quasi-Geostrophic Model

In this paper, we study the long-time behavior of solutions of the single-layer quasi-geostrophic model arising from geophysical fluid dynamics. We obtain the lower bound of the decay estimate of the solution. Utilizing the Fourier splitting method, under suitable assumptions on the initial data, for any multi-index α, we show that the solution Ψ satisfies .

An Example of a Bounded Potential q(x) on the Half-Line, for Estimates of A(α) Amplitude

We show an example of a bounded potential on the half-line obtained as the image of an Inverse Transformation Operator of the Bessel singular potential of the Reduced Radial Schr&#246;dinger Equation, and show us the Estimates of the A(α) amplitude.

From Black Holes to Information Erasure: Uniting Bekenstein’s Bound and Landauer’s Principle

This research aims to integrate Bekenstein’s bound and Landauer’s principle, providing a unified framework to understand the limits of information and energy in physical systems. By combining these principles, we explore the implications for black hole thermodynamics, astrophysics, astronomy, information theory, and the search for new laws of nature. The result includes an estimation of the number of bits stored in a black hole (less than 1.4 × 1030 bits/m3), enhancing our understanding of information storage in extreme gravitational environments. This integration offers valuable insights into the fundamental nature of information and energy, impacting scientific advancements in multiple disciplines.

Error reachable set based stabilization of switched linear systems with bounded peak disturbances

This paper investigates the error reachable set based stabilization problem for a class of discrete-time switched linear systems with bounded peak disturbances under persistent dwell-time(PDT)constraint.A double-clockdependent control scheme is presented that can split the disturbed switched system into a nominal system and an error system,and assign to each system a controller scheduled by a clock.A necessary and sufficient convex stability criterion is presented for the nominal system,and is further extended to the stabilization controller design with a nominal clock.In the presence of bounded peak disturbances,another stabilization controller with an error clock is developed for the error system,with the purpose of‘‘minimizing’’the reachable set of the error system by the ellipsoidal techniques.It is demonstrated that the disturbed system is also globally exponentially stable in the sense of converging to an over approximation of the reachable set of the error system,i.e.,a union of a family of bounding ellipsoids,that can also be regarded as the cross section of a tube containing the trajectories of the disturbed system.Two numerical examples are provided to verify the effectiveness of the developed results.

A New Era Of Mobility CRBC-built Mbour-Fatick-Kaolack motorway improves connectivity, promotes socio-economic development in Senegal

A temporary market serving mostly regional travellers is bustling near Keur Balla Lo located at the intersection of Route Nationale 1(RN1)and under-construction Mbour-Fatick-Kaolack motorway,which is an extension of the motorway connecting Thiès to Mbour via Blaise Diagne International Airport(AIBD).On this August morning,numerous workers are vigorously building the Keur Balla Lo bridge to facilitate the motorway’s crossing of the RN1.The motorway is the third road project of China Road and Bridge Corp.(CRBC)in Senegal,following the completion of the Thiès-Touba motorway,commonly referred to as“Ila Touba,”and the Mbour-AIBD-Thiès motorway.