The properties of the fundamental solution are derived in linear elastostatics. These properties are used to show that the conventional displacement and traction boundary integral equations yield non-unique displaceme...The properties of the fundamental solution are derived in linear elastostatics. These properties are used to show that the conventional displacement and traction boundary integral equations yield non-unique displacement solutions in a traction boundary value problem. The condition for the existence of unique displacement solutions is proposed for the traction boundary value problem. The degrees of freedom of the displacement solution are removed by the condition to obtain the boundary integral equations of unique solutions for the traction boundary value problems. Numerical example is presented to demonstrate the accuracy and efficiency of the present equations.展开更多
The meshless method is a new numerical technique presented in recent years.It uses the moving least square(MLS)approximation as a shape function.The smoothness of the MLS approximation is determined by that of the bas...The meshless method is a new numerical technique presented in recent years.It uses the moving least square(MLS)approximation as a shape function.The smoothness of the MLS approximation is determined by that of the basic function and of the weight function,and is mainly determined by that of the weight function.Therefore,the weight function greatly affects the accuracy of results obtained.Different kinds of weight functions,such as the spline function, the Gauss function and so on,are proposed recently by many researchers.In the present work,the features of various weight functions are illustrated through solving elasto-static problems using the local boundary integral equation method.The effect of various weight functions on the accuracy, convergence and stability of results obtained is also discussed.Examples show that the weight function proposed by Zhou Weiyuan and Gauss and the quartic spline weight function are better than the others if parameters c and α in Gauss and exponential weight functions are in the range of reasonable values,respectively,and the higher the smoothness of the weight function,the better the features of the solutions.展开更多
We consider a kind of scattering problem by a crack F that is buried in a bounded domain D, and we put a point source inside the domain D. This leads to a mixed boundary value problem to the Helmholtz equation in the ...We consider a kind of scattering problem by a crack F that is buried in a bounded domain D, and we put a point source inside the domain D. This leads to a mixed boundary value problem to the Helmholtz equation in the domain D with a crack Г. Both sides of the crack F are given Dirichlet-impedance boundary conditions, and different boundary condition (Dirichlet, Neumann or Impedance boundary condition) is set on the boundary of D. Applying potential theory, the problem can be reformulated as a system of boundary integral equations. We establish the existence and uniqueness of the solution to the system by using the Fredholm theory.展开更多
The universal practices have been centralizing on the research of regularization to the direct boundary integal equations (DBIEs). The character is elimination of singularities by using the simple solutions. However...The universal practices have been centralizing on the research of regularization to the direct boundary integal equations (DBIEs). The character is elimination of singularities by using the simple solutions. However, up to now the research of regularization to the first kind integral equations for plane potential problems has never been found in previous literatures. The presentation is mainly devoted to the research on the regularization of the singular boundary integral equations with indirect unknowns. A novel view and idea is presented herein, in which the regularized boundary integral equations with indirect unknowns without including the Cauchy principal value (CPV) and Hadamard-finite-part (HFP) integrals are established for the plane potential problems. With some numerical results, it is shown that the better accuracy and higher efficiency, especially on the boundary, can be achieved by the present system.展开更多
The concept of eigen crack opening displacement (COD) can be defined as the COD of a crack in infinite plate under the tractions acting on the crack surface. By introducing this concept, the eigen COD formulation of...The concept of eigen crack opening displacement (COD) can be defined as the COD of a crack in infinite plate under the tractions acting on the crack surface. By introducing this concept, the eigen COD formulation of boundary integral equation is proposed in this paper, together with the solution procedures for multiple crack problems in plane elasticity. With the proposed approach, the multiple crack problems can be solved with the conventional displacement discontinuity boundary integral equations in an iterative fashion with a small size of system matrix as that in the numerical Green’s function (NGF) approach but without the trouble to determine the complementary solutions since the standard boundary element discretization on the crack surface is no longer required with the proposed approach. Some numerical examples computing the stress intensity factors are presented and compared with those in literature to show the accuracy and the effectiveness of the proposed approach.展开更多
From the point of view of energy analysis, the cause that the uniqueness of the boundary integral equation induced from the exterior Helmholtz problem does not hold is investigated in this paper. It is proved that the...From the point of view of energy analysis, the cause that the uniqueness of the boundary integral equation induced from the exterior Helmholtz problem does not hold is investigated in this paper. It is proved that the Sommerfeld's condition at the infinity is changed so that it is suitable not only for the radiative wave but also for the absorptive wave when we use the boundary integral equation to describe the exterior Helmholtz problem. There fore, the total energy of the system is conservative. The mathematical dealings to guarantee the uniqueness are discussed based upon this explanation.展开更多
The meshless local boundary integral equation method is a currently developed numerical method, which combines the advantageous features of Galerkin finite element method(GFEM), boundary element method(BEM) and elemen...The meshless local boundary integral equation method is a currently developed numerical method, which combines the advantageous features of Galerkin finite element method(GFEM), boundary element method(BEM) and element free Galerkin method(EFGM), and is a truly meshless method possessing wide prospects in engineering applications. The companion solution and all the other formulas required in the meshless local boundary integral equation for a thin plate were presented, in order to make this method apply to solve the thin plate problem.展开更多
Equivalent Boundary Integral Equations (EBIE) with indirect unknowns for thin elastic plate bending theory, which is equivalent to the original boundary value problem, is established rigorously by mathematical techniq...Equivalent Boundary Integral Equations (EBIE) with indirect unknowns for thin elastic plate bending theory, which is equivalent to the original boundary value problem, is established rigorously by mathematical technique of non-analytic continuation and is fully proved by means of the variational principle. The previous three kinds of boundary integral equations with indirect unknowns are discussed thoroughly and it is shown that all previous results are not EBIE.展开更多
A computational model is proposed for short-fiber reinforced materials with the eigenstrain formulation of the boundary integral equations (BIE) and solved with the newly developed boundary point method (BPM). The...A computational model is proposed for short-fiber reinforced materials with the eigenstrain formulation of the boundary integral equations (BIE) and solved with the newly developed boundary point method (BPM). The model is closely derived from the concept of the equivalent inclusion Of Eshelby tensors. Eigenstrains are iteratively determined for each short-fiber embedded in the matrix with various properties via the Eshelby tensors, which can be readily obtained beforehand either through analytical or numerical means. As unknown variables appear only on the boundary of the solution domain, the solution scale of the inhomogeneity problem with the model is greatly reduced. This feature is considered significant because such a traditionally time-consuming problem with inhomogeneity can be solved most cost-effectively compared with existing numerical models of the FEM or the BEM. The numerical examples are presented to compute the overall elastic properties for various short-fiber reinforced composites over a representative volume element (RVE), showing the validity and the effectiveness of the proposed computational modal and the solution procedure.展开更多
The low-order polynomial-distributed eigenstrain formulation of the boundary integral equation (BIE) and the corresponding definition of the Eshelby tensors are proposed for the elliptical inhomogeneities in two-dim...The low-order polynomial-distributed eigenstrain formulation of the boundary integral equation (BIE) and the corresponding definition of the Eshelby tensors are proposed for the elliptical inhomogeneities in two-dimensional elastic media. Taking the results of the traditional subdomain boundary element method (BEM) as the control, the effectiveness of the present algorithm is verified for the elastic media with a single elliptical inhomogeneity. With the present computational model and algorithm, significant improvements are achieved in terms of the efficiency as compared with the traditional BEM and the accuracy as compared with the constant eigenstrain formulation of the BIE.展开更多
The boundary integral equation method (BIEM) is now widely used in numerical studies on earthquake rupture dynamics, and is proved to be a powerful tool to deal with problems on complex fault system. However, since ...The boundary integral equation method (BIEM) is now widely used in numerical studies on earthquake rupture dynamics, and is proved to be a powerful tool to deal with problems on complex fault system. However, since this method heavily lies on the specific forms of Green's function and only the Green's function in full-space has a closed analytic expression, it is usually limited to a full-space medium. In this study, as a first step to extend this method to an arbitrary complex fault system in half-space, the boundary integral equations (BIEs) for dynamic strike-slip on vertical complex fault system in half-space are derived based on exact Green's function for isotropic and homogeneous half-space. Effect of the geometry of the complex fault system are dealt with carefully. Final BIEs is composed of two parts: contribution from full-space, which has been thoroughly investigated by Aochi and his co-workers by using the Green's function for full-space, and that from free surface, which is studied in detail in this study.展开更多
When the source nodes are on the global boundary in the implementation of local boundary integral equation method (LBIEM), singularities in the local boundary integrals need to be treated specially. In the current p...When the source nodes are on the global boundary in the implementation of local boundary integral equation method (LBIEM), singularities in the local boundary integrals need to be treated specially. In the current paper, local integral equations are adopted for the nodes inside the domain and moving least square approximation (MLSA) for the nodes on the global boundary, thus singularities will not occur in the new al- gorithm. At the same time, approximation errors of boundary integrals are reduced significantly. As applications and numerical tests, Laplace equation and Helmholtz equation problems are considered and excellent numerical results are obtained. Furthermore, when solving the Helmholtz problems, the modified basis functions with wave solutions are adapted to replace the usually-used monomial basis functions. Numerical results show that this treatment is simple and effective and its application is promising in solutions for the wave propagation problem with high wave number.展开更多
Two fundamental solutions for bending problem of Reissner's plates on twoparameter foundation are derived by means of Fouier integral transformation of generalized function in this paper.On the basis of virtual wo...Two fundamental solutions for bending problem of Reissner's plates on twoparameter foundation are derived by means of Fouier integral transformation of generalized function in this paper.On the basis of virtual work principles, three boundary integral equations which fit for arbitrary shapes, loads and boundary conditions of thick plates are presented according to Hu Haichang's theory about Reissner's plates. It provides the fundamental theories for the application of BEM. A numerical example is given for clamped, simply supported and free boundary conditions. The results obtained are satisfactory as compared with the analytical methods.展开更多
Based on the fact that the singular boundary integrals in the sense of Cauchy principal value can be represented approximately by the mean values of two companion nearly singular boundary integrals, a vary general app...Based on the fact that the singular boundary integrals in the sense of Cauchy principal value can be represented approximately by the mean values of two companion nearly singular boundary integrals, a vary general approach was developed in the paper. In the approach, the approximate formulation before discretization was constructed to cope with the difficulties encountered in the corner treatment in the formulations of hypersingular boundary integral equations. This makes it possible to solve the hypersingular boundary integral equation numerically in a non regularized form and in a local manner by using conforming C 0 quadratic boundary elements and standard Gaussian quadratures similar to those employed in the conventional displacement BIE formulations. The approximate formulation is very convenient to use because the corner information is comprised naturally in the representations of those approximate integrals. Numerical examples in plane elasticity show that with the present approach, the compatible or better results can be achieved in comparison with those of the conventional BIE formulations.展开更多
The exact form of the exterior problem for plane elasticity problems was produced and fully proved by the variational principle.Based on this,the equivalent boundary integral equations(EBIE) with direct variables,whic...The exact form of the exterior problem for plane elasticity problems was produced and fully proved by the variational principle.Based on this,the equivalent boundary integral equations(EBIE) with direct variables,which are equivalent to the original boundary value problem,were deduced rigorously.The conventionally prevailing boundary integral equation with direct variables was discussed thoroughly by some examples and it is shown that the previous results are not EBIE.展开更多
This paper studies a numerical solution of multiple hole problem by using a boundary integral equation.The studied problem can be considered as a supposition of many single hole problems.After considering the interact...This paper studies a numerical solution of multiple hole problem by using a boundary integral equation.The studied problem can be considered as a supposition of many single hole problems.After considering the interaction among holes,an algebraic equation is formulated,which is then solved by using an iteration technique.The hoop stress around holes can be finally determined. One numerical example is provided to check its accuracy.展开更多
This paper studies several problems , which are potentially relevant for the construction of adaptive numerical schemes. First, biorthogonal spline wavelets on [0,1] are chosen as a starting point for characterization...This paper studies several problems , which are potentially relevant for the construction of adaptive numerical schemes. First, biorthogonal spline wavelets on [0,1] are chosen as a starting point for characterizations of functions in Besom spaces B(?)(0,1) with 0<σ<∞ and (1+σ)-1<γ<∞. Such function spaces are known to be related to nonlinear approximation. Then so called restricted nonlinear approximation procedures with respect to Sobolev space norms are considered. Besides characterization results Jackson type estimates for various tree-type and tresholding algorithms are investigated. Finally known approximation results for geometry induced singularity functions of boundary integeral equations are combined with the characterization results for restricted nonlinear approximation to show Besov space regularity results.展开更多
A complete boundary integral formulation for steady compressible inviscid flows governed by nonlinear equations is established by using ρV as variable. Thus, the dimensionality of the problem to be solved is reduced ...A complete boundary integral formulation for steady compressible inviscid flows governed by nonlinear equations is established by using ρV as variable. Thus, the dimensionality of the problem to be solved is reduced by one and the computational mesh to be generated is needed only on the boundary of the domain.展开更多
Accurate boundary conditions of composite material plates with different holes are founded to settle boundary condition problems of complex holes by conformal mapping method upon the nonhomogeneous anisotropic elastic...Accurate boundary conditions of composite material plates with different holes are founded to settle boundary condition problems of complex holes by conformal mapping method upon the nonhomogeneous anisotropic elastic and complex function theory. And then the two stress functions required were founded on Cauchy integral by boundary conditions. The final stress distributions of opening structure and the analytical solution on composite material plate with rectangle hole and wing manholes were achieved. The influences on hole-edge stress concentration factors are discussed under different loads and fiber direction cases, and then contrast calculates are carried through FEM.展开更多
The development of an in-house computer program for determining the motions and loads of advancing ships through sea waves in the frequency domain,is described in this paper.The code is based on the potential flow for...The development of an in-house computer program for determining the motions and loads of advancing ships through sea waves in the frequency domain,is described in this paper.The code is based on the potential flow formulation and originates from a double-body code enhanced with the regular part of the velocity potential computed using the pulsing source Green function.The code is fully developed in C++language with extensive use of the object-oriented paradigm.The code is capable of estimating the excitation and inertial radiation loads or arbitrary incoming wave frequencies and incidence angles.The hydrodynamic responses such as hydrodynamic coefficients,ship motions,the vertical shear force and the vertical bending moment are estimated.A benchmark container ship and an LNG carrier are selected for testing and validating the computer code.The obtained results are compared with the available experimental data which demonstrate the acceptable compliance for the zero speed whereas there are some discrepancies over the range of frequencies for the advancing ship in different heading angles.展开更多
文摘The properties of the fundamental solution are derived in linear elastostatics. These properties are used to show that the conventional displacement and traction boundary integral equations yield non-unique displacement solutions in a traction boundary value problem. The condition for the existence of unique displacement solutions is proposed for the traction boundary value problem. The degrees of freedom of the displacement solution are removed by the condition to obtain the boundary integral equations of unique solutions for the traction boundary value problems. Numerical example is presented to demonstrate the accuracy and efficiency of the present equations.
文摘The meshless method is a new numerical technique presented in recent years.It uses the moving least square(MLS)approximation as a shape function.The smoothness of the MLS approximation is determined by that of the basic function and of the weight function,and is mainly determined by that of the weight function.Therefore,the weight function greatly affects the accuracy of results obtained.Different kinds of weight functions,such as the spline function, the Gauss function and so on,are proposed recently by many researchers.In the present work,the features of various weight functions are illustrated through solving elasto-static problems using the local boundary integral equation method.The effect of various weight functions on the accuracy, convergence and stability of results obtained is also discussed.Examples show that the weight function proposed by Zhou Weiyuan and Gauss and the quartic spline weight function are better than the others if parameters c and α in Gauss and exponential weight functions are in the range of reasonable values,respectively,and the higher the smoothness of the weight function,the better the features of the solutions.
基金supported by the grant from the National Natural Science Foundation of China(11301405)supported by the grants from the National Natural Science Foundation of China(11171127 and 10871080)
文摘We consider a kind of scattering problem by a crack F that is buried in a bounded domain D, and we put a point source inside the domain D. This leads to a mixed boundary value problem to the Helmholtz equation in the domain D with a crack Г. Both sides of the crack F are given Dirichlet-impedance boundary conditions, and different boundary condition (Dirichlet, Neumann or Impedance boundary condition) is set on the boundary of D. Applying potential theory, the problem can be reformulated as a system of boundary integral equations. We establish the existence and uniqueness of the solution to the system by using the Fredholm theory.
基金Project supported by the National Natural Science Foundation of China (No.10571110)the Natural Science Foundation of Shandong Province of China (No.2003ZX12)
文摘The universal practices have been centralizing on the research of regularization to the direct boundary integal equations (DBIEs). The character is elimination of singularities by using the simple solutions. However, up to now the research of regularization to the first kind integral equations for plane potential problems has never been found in previous literatures. The presentation is mainly devoted to the research on the regularization of the singular boundary integral equations with indirect unknowns. A novel view and idea is presented herein, in which the regularized boundary integral equations with indirect unknowns without including the Cauchy principal value (CPV) and Hadamard-finite-part (HFP) integrals are established for the plane potential problems. With some numerical results, it is shown that the better accuracy and higher efficiency, especially on the boundary, can be achieved by the present system.
基金supported by the National Natural Science Foundation of China (Grant No.10972131)the Graduate Innovation Foundation of Shanghai University (Grant No.SHUCX102351)
文摘The concept of eigen crack opening displacement (COD) can be defined as the COD of a crack in infinite plate under the tractions acting on the crack surface. By introducing this concept, the eigen COD formulation of boundary integral equation is proposed in this paper, together with the solution procedures for multiple crack problems in plane elasticity. With the proposed approach, the multiple crack problems can be solved with the conventional displacement discontinuity boundary integral equations in an iterative fashion with a small size of system matrix as that in the numerical Green’s function (NGF) approach but without the trouble to determine the complementary solutions since the standard boundary element discretization on the crack surface is no longer required with the proposed approach. Some numerical examples computing the stress intensity factors are presented and compared with those in literature to show the accuracy and the effectiveness of the proposed approach.
文摘From the point of view of energy analysis, the cause that the uniqueness of the boundary integral equation induced from the exterior Helmholtz problem does not hold is investigated in this paper. It is proved that the Sommerfeld's condition at the infinity is changed so that it is suitable not only for the radiative wave but also for the absorptive wave when we use the boundary integral equation to describe the exterior Helmholtz problem. There fore, the total energy of the system is conservative. The mathematical dealings to guarantee the uniqueness are discussed based upon this explanation.
文摘The meshless local boundary integral equation method is a currently developed numerical method, which combines the advantageous features of Galerkin finite element method(GFEM), boundary element method(BEM) and element free Galerkin method(EFGM), and is a truly meshless method possessing wide prospects in engineering applications. The companion solution and all the other formulas required in the meshless local boundary integral equation for a thin plate were presented, in order to make this method apply to solve the thin plate problem.
文摘Equivalent Boundary Integral Equations (EBIE) with indirect unknowns for thin elastic plate bending theory, which is equivalent to the original boundary value problem, is established rigorously by mathematical technique of non-analytic continuation and is fully proved by means of the variational principle. The previous three kinds of boundary integral equations with indirect unknowns are discussed thoroughly and it is shown that all previous results are not EBIE.
基金Project supported by the National Natural Science Foundation of China (No.10772106)
文摘A computational model is proposed for short-fiber reinforced materials with the eigenstrain formulation of the boundary integral equations (BIE) and solved with the newly developed boundary point method (BPM). The model is closely derived from the concept of the equivalent inclusion Of Eshelby tensors. Eigenstrains are iteratively determined for each short-fiber embedded in the matrix with various properties via the Eshelby tensors, which can be readily obtained beforehand either through analytical or numerical means. As unknown variables appear only on the boundary of the solution domain, the solution scale of the inhomogeneity problem with the model is greatly reduced. This feature is considered significant because such a traditionally time-consuming problem with inhomogeneity can be solved most cost-effectively compared with existing numerical models of the FEM or the BEM. The numerical examples are presented to compute the overall elastic properties for various short-fiber reinforced composites over a representative volume element (RVE), showing the validity and the effectiveness of the proposed computational modal and the solution procedure.
基金supported by the National Natural Science Foundation of China(No.10972131)the Graduate Innovation Foundation of Shanghai University(No.SHUCX102351)
文摘The low-order polynomial-distributed eigenstrain formulation of the boundary integral equation (BIE) and the corresponding definition of the Eshelby tensors are proposed for the elliptical inhomogeneities in two-dimensional elastic media. Taking the results of the traditional subdomain boundary element method (BEM) as the control, the effectiveness of the present algorithm is verified for the elastic media with a single elliptical inhomogeneity. With the present computational model and algorithm, significant improvements are achieved in terms of the efficiency as compared with the traditional BEM and the accuracy as compared with the constant eigenstrain formulation of the BIE.
基金supported by the President Fund of GUCAS(No. O85101CM03)National Natural Science Foundation of China(Nos.90715019 and 40821062)partially by National Basic Research Program of China (No.2004CB418404)
文摘The boundary integral equation method (BIEM) is now widely used in numerical studies on earthquake rupture dynamics, and is proved to be a powerful tool to deal with problems on complex fault system. However, since this method heavily lies on the specific forms of Green's function and only the Green's function in full-space has a closed analytic expression, it is usually limited to a full-space medium. In this study, as a first step to extend this method to an arbitrary complex fault system in half-space, the boundary integral equations (BIEs) for dynamic strike-slip on vertical complex fault system in half-space are derived based on exact Green's function for isotropic and homogeneous half-space. Effect of the geometry of the complex fault system are dealt with carefully. Final BIEs is composed of two parts: contribution from full-space, which has been thoroughly investigated by Aochi and his co-workers by using the Green's function for full-space, and that from free surface, which is studied in detail in this study.
文摘When the source nodes are on the global boundary in the implementation of local boundary integral equation method (LBIEM), singularities in the local boundary integrals need to be treated specially. In the current paper, local integral equations are adopted for the nodes inside the domain and moving least square approximation (MLSA) for the nodes on the global boundary, thus singularities will not occur in the new al- gorithm. At the same time, approximation errors of boundary integrals are reduced significantly. As applications and numerical tests, Laplace equation and Helmholtz equation problems are considered and excellent numerical results are obtained. Furthermore, when solving the Helmholtz problems, the modified basis functions with wave solutions are adapted to replace the usually-used monomial basis functions. Numerical results show that this treatment is simple and effective and its application is promising in solutions for the wave propagation problem with high wave number.
文摘Two fundamental solutions for bending problem of Reissner's plates on twoparameter foundation are derived by means of Fouier integral transformation of generalized function in this paper.On the basis of virtual work principles, three boundary integral equations which fit for arbitrary shapes, loads and boundary conditions of thick plates are presented according to Hu Haichang's theory about Reissner's plates. It provides the fundamental theories for the application of BEM. A numerical example is given for clamped, simply supported and free boundary conditions. The results obtained are satisfactory as compared with the analytical methods.
文摘Based on the fact that the singular boundary integrals in the sense of Cauchy principal value can be represented approximately by the mean values of two companion nearly singular boundary integrals, a vary general approach was developed in the paper. In the approach, the approximate formulation before discretization was constructed to cope with the difficulties encountered in the corner treatment in the formulations of hypersingular boundary integral equations. This makes it possible to solve the hypersingular boundary integral equation numerically in a non regularized form and in a local manner by using conforming C 0 quadratic boundary elements and standard Gaussian quadratures similar to those employed in the conventional displacement BIE formulations. The approximate formulation is very convenient to use because the corner information is comprised naturally in the representations of those approximate integrals. Numerical examples in plane elasticity show that with the present approach, the compatible or better results can be achieved in comparison with those of the conventional BIE formulations.
文摘The exact form of the exterior problem for plane elasticity problems was produced and fully proved by the variational principle.Based on this,the equivalent boundary integral equations(EBIE) with direct variables,which are equivalent to the original boundary value problem,were deduced rigorously.The conventionally prevailing boundary integral equation with direct variables was discussed thoroughly by some examples and it is shown that the previous results are not EBIE.
文摘This paper studies a numerical solution of multiple hole problem by using a boundary integral equation.The studied problem can be considered as a supposition of many single hole problems.After considering the interaction among holes,an algebraic equation is formulated,which is then solved by using an iteration technique.The hoop stress around holes can be finally determined. One numerical example is provided to check its accuracy.
基金The work of the author has been supported by the Deutache Forschungsgemeinschaft(DFG) under Grant Ho 1846/1-1
文摘This paper studies several problems , which are potentially relevant for the construction of adaptive numerical schemes. First, biorthogonal spline wavelets on [0,1] are chosen as a starting point for characterizations of functions in Besom spaces B(?)(0,1) with 0<σ<∞ and (1+σ)-1<γ<∞. Such function spaces are known to be related to nonlinear approximation. Then so called restricted nonlinear approximation procedures with respect to Sobolev space norms are considered. Besides characterization results Jackson type estimates for various tree-type and tresholding algorithms are investigated. Finally known approximation results for geometry induced singularity functions of boundary integeral equations are combined with the characterization results for restricted nonlinear approximation to show Besov space regularity results.
文摘A complete boundary integral formulation for steady compressible inviscid flows governed by nonlinear equations is established by using ρV as variable. Thus, the dimensionality of the problem to be solved is reduced by one and the computational mesh to be generated is needed only on the boundary of the domain.
基金This project is supported by National Natural Science Foundation of China(No.50175031).
文摘Accurate boundary conditions of composite material plates with different holes are founded to settle boundary condition problems of complex holes by conformal mapping method upon the nonhomogeneous anisotropic elastic and complex function theory. And then the two stress functions required were founded on Cauchy integral by boundary conditions. The final stress distributions of opening structure and the analytical solution on composite material plate with rectangle hole and wing manholes were achieved. The influences on hole-edge stress concentration factors are discussed under different loads and fiber direction cases, and then contrast calculates are carried through FEM.
文摘The development of an in-house computer program for determining the motions and loads of advancing ships through sea waves in the frequency domain,is described in this paper.The code is based on the potential flow formulation and originates from a double-body code enhanced with the regular part of the velocity potential computed using the pulsing source Green function.The code is fully developed in C++language with extensive use of the object-oriented paradigm.The code is capable of estimating the excitation and inertial radiation loads or arbitrary incoming wave frequencies and incidence angles.The hydrodynamic responses such as hydrodynamic coefficients,ship motions,the vertical shear force and the vertical bending moment are estimated.A benchmark container ship and an LNG carrier are selected for testing and validating the computer code.The obtained results are compared with the available experimental data which demonstrate the acceptable compliance for the zero speed whereas there are some discrepancies over the range of frequencies for the advancing ship in different heading angles.