Copper-based azide(Cu(N_(3))2 or CuN_(3),CA)chips synthesized by in-situ azide reaction and utilized in miniaturized explosive systems has become a hot research topic in recent years.However,the advantages of in-situ ...Copper-based azide(Cu(N_(3))2 or CuN_(3),CA)chips synthesized by in-situ azide reaction and utilized in miniaturized explosive systems has become a hot research topic in recent years.However,the advantages of in-situ synthesis method,including small size and low dosage,bring about difficulties in quantitative analysis and differences in ignition capabilities of CA chips.The aim of present work is to develop a simplified quantitative analysis method for accurate and safe analysis of components in CA chips to evaluate and investigate the corresponding ignition ability.In this work,Cu(N_(3))2 and CuN_(3)components in CA chips were separated through dissolution and distillation by utilizing the difference in solubility and corresponding content was obtained by measuring N_(3)-concentration through spectrophotometry.The spectrophotometry method was optimized by studying influencing factors and the recovery rate of different separation methods was studied,ensuring the accuracy and reproducibility of test results.The optimized method is linear in range from 1.0-25.0 mg/L,with a correlation coefficient R^(2)=0.9998,which meets the requirements of CA chips with a milligram-level content test.Compared with the existing ICP method,component analysis results of CA chips obtained by spectrophotometry are closer to real component content in samples and have satisfactory accuracy.Moreover,as its application in miniaturized explosive systems,the ignition ability of CA chips with different component contents for direct ink writing CL-20 and the corresponding mechanism was studied.This study provided a basis and idea for the design and performance evaluation of CA chips in miniaturized explosive systems.展开更多
目的:分析骨髓增殖性肿瘤(MPN)患者不确定潜能的克隆性造血(CHIP)相关基因突变谱和临床特征,探讨CHIP相关基因与其心脑血管事件(CCE)的相关性及可能作用机制。方法:回顾性分析2019年8月-2022年7月首都医科大学附属北京安贞医院血液科收...目的:分析骨髓增殖性肿瘤(MPN)患者不确定潜能的克隆性造血(CHIP)相关基因突变谱和临床特征,探讨CHIP相关基因与其心脑血管事件(CCE)的相关性及可能作用机制。方法:回顾性分析2019年8月-2022年7月首都医科大学附属北京安贞医院血液科收治的73例MPN患者的临床资料和二代测序结果,采用Logistic回归分析CHIP相关基因、炎症细胞因子对MPN患者CCE的影响。结果:55例(75.3%)MPN患者检出CHIP相关基因,原发性血小板增多症(ET)和真性红细胞增多症(PV)患者CHIP相关基因各突变频率差异无统计学意义。CHIP相关基因突变以单基因形式为主,检出率从高至低依次为JAK2V617F(63.0%,46/73)、ASXL1(16.4%,12/73)、TET2(11.0%,8/73)、DNMT3A(9.6%,7/73)、SRSF2(6.9%,5/73)、SF3B1(4.1%,3/73)、TP53(1.4%,1/73)和PPMID(1.4%,1/73)。年龄>60岁患者CHIP相关基因检出率明显高于≤60岁者[91.7%(33/36)vs 59.5%(22/37)]。27例(37.0%)MPN患者伴CCE(MPN/CCE),2次CCE者5例,均为动脉事件。CCE组患者年龄(62.8±12.8 vs 53.9±15.8岁,P=0.015)、IL-1β水平(17.7±26.0vs 4.3±8.6,P=0.012)、IL-8水平(360.7±598.6 vs 108.3±317.0,P=0.045)、血栓形成史(29.6%vs 2.2%,P=0.020)和CHIP相关基因检出率(88.9%vs 67.4%,P=0.040)高于无CCE组。多因素Logistic回归分析结果显示,年龄(OR=0.917,95%CI:0.843-0.999,P=0.047)、血栓形成史(OR=34.148,95%CI:2.392-487.535,P=0.009)、任何1个CHIP相关基因突变(OR=16.065,95%CI:1.217-212.024,P=0.035)和IL-1β水平升高(OR=0.929,95%CI:0.870-0.992,P=0.027)均是MPN/CCE的独立危险因素;CHIP相关单基因突变与MPN/CCE无关,但DNMT3A(OR=88.717,95%CI:2.690-292.482,P=0.012)、ASXL1(OR=7.941,95%CI:1.045-60.353,P=0.045)突变是PV/CCE的独立危险因素。结论:MPN患者CHIP相关基因突变率高,尤其是60岁以上患者;高龄、血栓形成史、CHIP相关基因突变和IL-1β水平升高是MPN发生CCE的独立危险因素。DNMT3A、ASXL1单基因突变是PV患者CCE的独立危险因素。CHIP相关基因突变及炎症细胞因子IL-1β升高是MPN新的CCE危险因素。展开更多
Diabetes mellitus is a global health problem resulting from islet dysfunction or insulin resistance.The mechanisms of islet dysfunction are still under investigation.Islet hormone secretion is the main function of isl...Diabetes mellitus is a global health problem resulting from islet dysfunction or insulin resistance.The mechanisms of islet dysfunction are still under investigation.Islet hormone secretion is the main function of islets,and serves an important role in the homeostasis of blood glucose.Elucidating the detailed mechanism of islet hormone secretome distortion can provide clues for the treatment of diabetes.Therefore,it is crucial to develop accurate,real-time,laborsaving,high-throughput,automated,and cost-effective techniques for the sensing of islet secretome.Microfluidic chips,an elegant platform that combines biology,engineering,computer science,and biomaterials,have attracted tremendous interest from scientists in the field of diabetes worldwide.These tiny devices are miniatures of traditional experimental systems with more advantages of timesaving,reagent-minimization,automation,high-throughput,and online detection.These features of microfluidic chips meet the demands of islet secretome analysis and a variety of chips have been designed in the past 20 years.In this review,we present a brief introduction of microfluidic chips,and three microfluidic chipsbased islet hormone sensing techniques.We focus mainly on the theory of these techniques,and provide detailed examples based on these theories with the hope of providing some insights into the design of future chips or whole detection systems.展开更多
To enable the detection and modulation of modularized neural networks in vitro,this study proposes a microfluidic microelectrode array chip for the cultivation,compartmentalization,and control of neural cells.The chip...To enable the detection and modulation of modularized neural networks in vitro,this study proposes a microfluidic microelectrode array chip for the cultivation,compartmentalization,and control of neural cells.The chip was designed based on the specific structure of neurons and the requirements for detection and modulation.Finite-element analysis of the chip’s flow field was conducted using the COMSOL Multiphysics software,and the simulation results show that the liquid within the chip can flow smoothly,ensuring stable flow fields that facilitate the uniform growth of neurons within the microfluidic channels.By employing MEMS technology in combination with nanomaterial modification techniques,the microfluidic microelectrode array chip was fabricated successfully.Primary hippocampal neurons were cultured on the chip,forming a well-defined neural network.Spontaneous electrical activity of the detected neurons was recorded,exhibiting a 23.7%increase in amplitude compared to neuronal discharges detected on an open-field microelectrode array.This study provides a platform for the precise detection and modulation of patterned neuronal growth in vitro,potentially serving as a novel tool in neuroscience research.展开更多
It is still challenging to fully integrate computing in memory chip as edge learning devices.In recent work published on Science,a fully-integrated chip based on neuromorphic memristors was developed for edge learning...It is still challenging to fully integrate computing in memory chip as edge learning devices.In recent work published on Science,a fully-integrated chip based on neuromorphic memristors was developed for edge learning as artificial neural networks with functionality of synapses,dendrites,and somas.A crossbar-array memristor chip facilitated edge learning including hardware realization,learning algorithm,and cycle-parallel sign-and threshold-based learning(STELLAR)scheme.The motion control and demonstration platforms were executed to improve the edge learning ability for adapting to new scenarios.展开更多
On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual cells.However,state-of-the-art microfluidic chips for droplet sorting still suffer from low sortin...On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual cells.However,state-of-the-art microfluidic chips for droplet sorting still suffer from low sorting speeds,sample loss,and labor-intensive preparation procedures.Here,we demonstrate the development of a novel microfluidic chip that integrates droplet generation,on-demand electrostatic droplet charging,and high-throughput sorting.The charging electrode is a copper wire buried above the nozzle of the microchannel,and the deflecting electrode is the phosphate buffered saline in the microchannel,which greatly simplifies the structure and fabrication process of the chip.Moreover,this chip is capable of high-frequency droplet generation and sorting,with a frequency of 11.757 kHz in the drop state.The chip completes the selective charging process via electrostatic induction during droplet generation.On-demand charged microdroplets can arbitrarilymove to specific exit channels in a three-dimensional(3D)-deflected electric field,which can be controlled according to user requirements,and the flux of droplet deflection is thereby significantly enhanced.Furthermore,a lossless modification strategy is presented to improve the accuracy of droplet deflection or harvest rate from 97.49% to 99.38% by monitoring the frequency of droplet generation in real time and feeding it back to the charging signal.This chip has great potential for quantitative processing and analysis of single cells for elucidating cell-to-cell variations.展开更多
Convolutional neural networks(CNNs) exhibit excellent performance in the areas of image recognition and object detection, which can enhance the intelligence level of spacecraft. However, in aerospace, energetic partic...Convolutional neural networks(CNNs) exhibit excellent performance in the areas of image recognition and object detection, which can enhance the intelligence level of spacecraft. However, in aerospace, energetic particles, such as heavy ions, protons, and alpha particles, can induce single event effects(SEEs) that lead CNNs to malfunction and can significantly impact the reliability of a CNN system. In this paper, the MNIST CNN system was constructed based on a 28 nm systemon-chip(SoC), and then an alpha particle irradiation experiment and fault injection were applied to evaluate the SEE of the CNN system. Various types of soft errors in the CNN system have been detected, and the SEE cross sections have been calculated. Furthermore, the mechanisms behind some soft errors have been explained. This research will provide technical support for the design of radiation-resistant artificial intelligence chips.展开更多
In recent years,space-division multiplexing(SDM)technology,which involves transmitting data information on multiple parallel channels for efficient capacity scaling,has been widely used in fiber and free-space optical...In recent years,space-division multiplexing(SDM)technology,which involves transmitting data information on multiple parallel channels for efficient capacity scaling,has been widely used in fiber and free-space optical communication sys-tems.To enable flexible data management and cope with the mixing between different channels,the integrated reconfig-urable optical processor is used for optical switching and mitigating the channel crosstalk.However,efficient online train-ing becomes intricate and challenging,particularly when dealing with a significant number of channels.Here we use the stochastic parallel gradient descent(SPGD)algorithm to configure the integrated optical processor,which has less com-putation than the traditional gradient descent(GD)algorithm.We design and fabricate a 6×6 on-chip optical processor on silicon platform to implement optical switching and descrambling assisted by the online training with the SPDG algorithm.Moreover,we apply the on-chip processor configured by the SPGD algorithm to optical communications for optical switching and efficiently mitigating the channel crosstalk in SDM systems.In comparison with the traditional GD al-gorithm,it is found that the SPGD algorithm features better performance especially when the scale of matrix is large,which means it has the potential to optimize large-scale optical matrix computation acceleration chips.展开更多
The effect of Ce on ignition point of AZ91D magnesium alloy chips was studied. For the AZ91D and the AZ91D-xCe magnesium alloys, changing the sizes of the chips in the range of 58 - 270 μm has a limited influence on ...The effect of Ce on ignition point of AZ91D magnesium alloy chips was studied. For the AZ91D and the AZ91D-xCe magnesium alloys, changing the sizes of the chips in the range of 58 - 270 μm has a limited influence on ignition point, however, the shift of the content of Ce has much effect on ignition point. Increasing the Ce content, x from 0.15 to 0.25, the ignition point increases with increasing of Ce; however, x from 0.25 to 0.45, the ignition point decreases with increasing of Ce. By the addition of Ce of 0.25 %. the ignition point is raised by 43℃.展开更多
趋化抑制蛋白(Chemotaxis Inhibitory Protein ofStaphylococcus aureus,CHIPS)是由金黄色葡萄球菌分泌到菌体外的一种蛋白。在感染早期,它能特异性地与中性粒细胞和单核细胞上的C5a受体(C5aR)和fMLP受体(FPR)结合,从而阻止中性粒细胞...趋化抑制蛋白(Chemotaxis Inhibitory Protein ofStaphylococcus aureus,CHIPS)是由金黄色葡萄球菌分泌到菌体外的一种蛋白。在感染早期,它能特异性地与中性粒细胞和单核细胞上的C5a受体(C5aR)和fMLP受体(FPR)结合,从而阻止中性粒细胞和单核细胞对C5a和fMLP的结合作用,导致对病原吞噬作用的延迟。人们可以利用CHIPS对C5a-C5aR的阻止作用来研制治疗由C5a诱发的炎症性疾病的药物。将CHIPS作为免疫原防治疾病也将成为新的研究课题。实验成功构建了CHIPS蛋白的原核表达系统,为CHIPS免疫原性研究及蛋白的其他功能研究奠定了基础。展开更多
The present paper is related to the conversion of Ti–6Al–4V chips into powder and investigates the usability of the produced powder in powder metallurgy applications. In this regard, a disc-milling process was appli...The present paper is related to the conversion of Ti–6Al–4V chips into powder and investigates the usability of the produced powder in powder metallurgy applications. In this regard, a disc-milling process was applied to Ti–6Al–4V chips and the obtained powder was subsequently compacted. The compacted samples were sintered by the sinter hot isostatic pressing (sinter-HIP) method at 1200°C under high vacuum, their mechanical properties and microstructure were investigated and compared with those of commercial powder compacts subjected to the same preparation processes. The results showed that the produced powder exhibits greater flowability and higher apparent density than the commercial powder. However, the sintered products prepared from the commercial powder exhibited a higher relative density, lower porosity, and, as a result, greater flexural strength compared with the sintered compacts prepared from the produced powder. In addition, transgranular fracture was greater in the sintered products of the commercial powder. The microstructural studies revealed that the sintered products made from both the commercial and the produced powders consisted of α- and β-phase but contained more α-phase. All of the examined properties were found to be substantially affected by the particle size of the powders.展开更多
基金the financial support provided by the National Natural Science Foundation of China(Grant No.11872013).
文摘Copper-based azide(Cu(N_(3))2 or CuN_(3),CA)chips synthesized by in-situ azide reaction and utilized in miniaturized explosive systems has become a hot research topic in recent years.However,the advantages of in-situ synthesis method,including small size and low dosage,bring about difficulties in quantitative analysis and differences in ignition capabilities of CA chips.The aim of present work is to develop a simplified quantitative analysis method for accurate and safe analysis of components in CA chips to evaluate and investigate the corresponding ignition ability.In this work,Cu(N_(3))2 and CuN_(3)components in CA chips were separated through dissolution and distillation by utilizing the difference in solubility and corresponding content was obtained by measuring N_(3)-concentration through spectrophotometry.The spectrophotometry method was optimized by studying influencing factors and the recovery rate of different separation methods was studied,ensuring the accuracy and reproducibility of test results.The optimized method is linear in range from 1.0-25.0 mg/L,with a correlation coefficient R^(2)=0.9998,which meets the requirements of CA chips with a milligram-level content test.Compared with the existing ICP method,component analysis results of CA chips obtained by spectrophotometry are closer to real component content in samples and have satisfactory accuracy.Moreover,as its application in miniaturized explosive systems,the ignition ability of CA chips with different component contents for direct ink writing CL-20 and the corresponding mechanism was studied.This study provided a basis and idea for the design and performance evaluation of CA chips in miniaturized explosive systems.
文摘目的:分析骨髓增殖性肿瘤(MPN)患者不确定潜能的克隆性造血(CHIP)相关基因突变谱和临床特征,探讨CHIP相关基因与其心脑血管事件(CCE)的相关性及可能作用机制。方法:回顾性分析2019年8月-2022年7月首都医科大学附属北京安贞医院血液科收治的73例MPN患者的临床资料和二代测序结果,采用Logistic回归分析CHIP相关基因、炎症细胞因子对MPN患者CCE的影响。结果:55例(75.3%)MPN患者检出CHIP相关基因,原发性血小板增多症(ET)和真性红细胞增多症(PV)患者CHIP相关基因各突变频率差异无统计学意义。CHIP相关基因突变以单基因形式为主,检出率从高至低依次为JAK2V617F(63.0%,46/73)、ASXL1(16.4%,12/73)、TET2(11.0%,8/73)、DNMT3A(9.6%,7/73)、SRSF2(6.9%,5/73)、SF3B1(4.1%,3/73)、TP53(1.4%,1/73)和PPMID(1.4%,1/73)。年龄>60岁患者CHIP相关基因检出率明显高于≤60岁者[91.7%(33/36)vs 59.5%(22/37)]。27例(37.0%)MPN患者伴CCE(MPN/CCE),2次CCE者5例,均为动脉事件。CCE组患者年龄(62.8±12.8 vs 53.9±15.8岁,P=0.015)、IL-1β水平(17.7±26.0vs 4.3±8.6,P=0.012)、IL-8水平(360.7±598.6 vs 108.3±317.0,P=0.045)、血栓形成史(29.6%vs 2.2%,P=0.020)和CHIP相关基因检出率(88.9%vs 67.4%,P=0.040)高于无CCE组。多因素Logistic回归分析结果显示,年龄(OR=0.917,95%CI:0.843-0.999,P=0.047)、血栓形成史(OR=34.148,95%CI:2.392-487.535,P=0.009)、任何1个CHIP相关基因突变(OR=16.065,95%CI:1.217-212.024,P=0.035)和IL-1β水平升高(OR=0.929,95%CI:0.870-0.992,P=0.027)均是MPN/CCE的独立危险因素;CHIP相关单基因突变与MPN/CCE无关,但DNMT3A(OR=88.717,95%CI:2.690-292.482,P=0.012)、ASXL1(OR=7.941,95%CI:1.045-60.353,P=0.045)突变是PV/CCE的独立危险因素。结论:MPN患者CHIP相关基因突变率高,尤其是60岁以上患者;高龄、血栓形成史、CHIP相关基因突变和IL-1β水平升高是MPN发生CCE的独立危险因素。DNMT3A、ASXL1单基因突变是PV患者CCE的独立危险因素。CHIP相关基因突变及炎症细胞因子IL-1β升高是MPN新的CCE危险因素。
基金Supported by the Project of Suzhou Hospital of Anhui Medical University,No.2020A1Natural Science Project of North Anhui Health Vocational College,No.WZK201907.
文摘Diabetes mellitus is a global health problem resulting from islet dysfunction or insulin resistance.The mechanisms of islet dysfunction are still under investigation.Islet hormone secretion is the main function of islets,and serves an important role in the homeostasis of blood glucose.Elucidating the detailed mechanism of islet hormone secretome distortion can provide clues for the treatment of diabetes.Therefore,it is crucial to develop accurate,real-time,laborsaving,high-throughput,automated,and cost-effective techniques for the sensing of islet secretome.Microfluidic chips,an elegant platform that combines biology,engineering,computer science,and biomaterials,have attracted tremendous interest from scientists in the field of diabetes worldwide.These tiny devices are miniatures of traditional experimental systems with more advantages of timesaving,reagent-minimization,automation,high-throughput,and online detection.These features of microfluidic chips meet the demands of islet secretome analysis and a variety of chips have been designed in the past 20 years.In this review,we present a brief introduction of microfluidic chips,and three microfluidic chipsbased islet hormone sensing techniques.We focus mainly on the theory of these techniques,and provide detailed examples based on these theories with the hope of providing some insights into the design of future chips or whole detection systems.
基金sponsored by the National Natural Science Foundation of China (Grant Nos.61960206012,62121003,T2293731,62171434,61975206,61971400,and 61973292)the National Key Research and Development Program of China (Grant Nos.2022YFB3205602 and 2022YFC2402501)+1 种基金Major Program of Scientific and Technical Innovation 2030 (Grant No.2021ZD02016030)the Scientific Instrument Developing Project of the Chinese Academy of Sciences (Grant No.GJJSTD20210004).
文摘To enable the detection and modulation of modularized neural networks in vitro,this study proposes a microfluidic microelectrode array chip for the cultivation,compartmentalization,and control of neural cells.The chip was designed based on the specific structure of neurons and the requirements for detection and modulation.Finite-element analysis of the chip’s flow field was conducted using the COMSOL Multiphysics software,and the simulation results show that the liquid within the chip can flow smoothly,ensuring stable flow fields that facilitate the uniform growth of neurons within the microfluidic channels.By employing MEMS technology in combination with nanomaterial modification techniques,the microfluidic microelectrode array chip was fabricated successfully.Primary hippocampal neurons were cultured on the chip,forming a well-defined neural network.Spontaneous electrical activity of the detected neurons was recorded,exhibiting a 23.7%increase in amplitude compared to neuronal discharges detected on an open-field microelectrode array.This study provides a platform for the precise detection and modulation of patterned neuronal growth in vitro,potentially serving as a novel tool in neuroscience research.
基金funding support from the National Natural Science Foundation of China(52172205).
文摘It is still challenging to fully integrate computing in memory chip as edge learning devices.In recent work published on Science,a fully-integrated chip based on neuromorphic memristors was developed for edge learning as artificial neural networks with functionality of synapses,dendrites,and somas.A crossbar-array memristor chip facilitated edge learning including hardware realization,learning algorithm,and cycle-parallel sign-and threshold-based learning(STELLAR)scheme.The motion control and demonstration platforms were executed to improve the edge learning ability for adapting to new scenarios.
基金The authors acknowledge the financial support from the NationalNatural Science Foundation ofChina(No.52275562)the Technology Innovation Fund of Huazhong University of Science and Technology(No.2022JYCXJJ015).
文摘On-demand droplet sorting is extensively applied for the efficient manipulation and genome-wide analysis of individual cells.However,state-of-the-art microfluidic chips for droplet sorting still suffer from low sorting speeds,sample loss,and labor-intensive preparation procedures.Here,we demonstrate the development of a novel microfluidic chip that integrates droplet generation,on-demand electrostatic droplet charging,and high-throughput sorting.The charging electrode is a copper wire buried above the nozzle of the microchannel,and the deflecting electrode is the phosphate buffered saline in the microchannel,which greatly simplifies the structure and fabrication process of the chip.Moreover,this chip is capable of high-frequency droplet generation and sorting,with a frequency of 11.757 kHz in the drop state.The chip completes the selective charging process via electrostatic induction during droplet generation.On-demand charged microdroplets can arbitrarilymove to specific exit channels in a three-dimensional(3D)-deflected electric field,which can be controlled according to user requirements,and the flux of droplet deflection is thereby significantly enhanced.Furthermore,a lossless modification strategy is presented to improve the accuracy of droplet deflection or harvest rate from 97.49% to 99.38% by monitoring the frequency of droplet generation in real time and feeding it back to the charging signal.This chip has great potential for quantitative processing and analysis of single cells for elucidating cell-to-cell variations.
基金Project supported by the National Natural Science Foundation of China(Grant No.12305303)the Natural Science Foundation of Hunan Province of China(Grant Nos.2023JJ40520,2021JJ40444,and 2019JJ30019)+3 种基金the Research Foundation of Education Bureau of Hunan Province of China(Grant No.20A430)the Science and Technology Innovation Program of Hunan Province(Grant No.2020RC3054)the Natural Science Basic Research Plan in the Shaanxi Province of China(Grant No.2023-JC-QN-0015)the Doctoral Research Fund of University of South China。
文摘Convolutional neural networks(CNNs) exhibit excellent performance in the areas of image recognition and object detection, which can enhance the intelligence level of spacecraft. However, in aerospace, energetic particles, such as heavy ions, protons, and alpha particles, can induce single event effects(SEEs) that lead CNNs to malfunction and can significantly impact the reliability of a CNN system. In this paper, the MNIST CNN system was constructed based on a 28 nm systemon-chip(SoC), and then an alpha particle irradiation experiment and fault injection were applied to evaluate the SEE of the CNN system. Various types of soft errors in the CNN system have been detected, and the SEE cross sections have been calculated. Furthermore, the mechanisms behind some soft errors have been explained. This research will provide technical support for the design of radiation-resistant artificial intelligence chips.
基金supported by the National Natural Science Foundation of China(NSFC)(62125503,62261160388)the Natural Science Foundation of Hubei Province of China(2023AFA028)the Innovation Project of Optics Valley Laboratory(OVL2021BG004).
文摘In recent years,space-division multiplexing(SDM)technology,which involves transmitting data information on multiple parallel channels for efficient capacity scaling,has been widely used in fiber and free-space optical communication sys-tems.To enable flexible data management and cope with the mixing between different channels,the integrated reconfig-urable optical processor is used for optical switching and mitigating the channel crosstalk.However,efficient online train-ing becomes intricate and challenging,particularly when dealing with a significant number of channels.Here we use the stochastic parallel gradient descent(SPGD)algorithm to configure the integrated optical processor,which has less com-putation than the traditional gradient descent(GD)algorithm.We design and fabricate a 6×6 on-chip optical processor on silicon platform to implement optical switching and descrambling assisted by the online training with the SPDG algorithm.Moreover,we apply the on-chip processor configured by the SPGD algorithm to optical communications for optical switching and efficiently mitigating the channel crosstalk in SDM systems.In comparison with the traditional GD al-gorithm,it is found that the SPGD algorithm features better performance especially when the scale of matrix is large,which means it has the potential to optimize large-scale optical matrix computation acceleration chips.
文摘The effect of Ce on ignition point of AZ91D magnesium alloy chips was studied. For the AZ91D and the AZ91D-xCe magnesium alloys, changing the sizes of the chips in the range of 58 - 270 μm has a limited influence on ignition point, however, the shift of the content of Ce has much effect on ignition point. Increasing the Ce content, x from 0.15 to 0.25, the ignition point increases with increasing of Ce; however, x from 0.25 to 0.45, the ignition point decreases with increasing of Ce. By the addition of Ce of 0.25 %. the ignition point is raised by 43℃.
文摘趋化抑制蛋白(Chemotaxis Inhibitory Protein ofStaphylococcus aureus,CHIPS)是由金黄色葡萄球菌分泌到菌体外的一种蛋白。在感染早期,它能特异性地与中性粒细胞和单核细胞上的C5a受体(C5aR)和fMLP受体(FPR)结合,从而阻止中性粒细胞和单核细胞对C5a和fMLP的结合作用,导致对病原吞噬作用的延迟。人们可以利用CHIPS对C5a-C5aR的阻止作用来研制治疗由C5a诱发的炎症性疾病的药物。将CHIPS作为免疫原防治疾病也将成为新的研究课题。实验成功构建了CHIPS蛋白的原核表达系统,为CHIPS免疫原性研究及蛋白的其他功能研究奠定了基础。
基金financially supported by Faculty Member Training Program funded by Council of Higher Education Turkey [OYP-05276-DR-12]
文摘The present paper is related to the conversion of Ti–6Al–4V chips into powder and investigates the usability of the produced powder in powder metallurgy applications. In this regard, a disc-milling process was applied to Ti–6Al–4V chips and the obtained powder was subsequently compacted. The compacted samples were sintered by the sinter hot isostatic pressing (sinter-HIP) method at 1200°C under high vacuum, their mechanical properties and microstructure were investigated and compared with those of commercial powder compacts subjected to the same preparation processes. The results showed that the produced powder exhibits greater flowability and higher apparent density than the commercial powder. However, the sintered products prepared from the commercial powder exhibited a higher relative density, lower porosity, and, as a result, greater flexural strength compared with the sintered compacts prepared from the produced powder. In addition, transgranular fracture was greater in the sintered products of the commercial powder. The microstructural studies revealed that the sintered products made from both the commercial and the produced powders consisted of α- and β-phase but contained more α-phase. All of the examined properties were found to be substantially affected by the particle size of the powders.