The simulation of the brake disc temperature is an important tool in the development of passenger cars.Nowadays thermal models of brake discs are real-time applications,running on electronic control units(ECUs)of cars...The simulation of the brake disc temperature is an important tool in the development of passenger cars.Nowadays thermal models of brake discs are real-time applications,running on electronic control units(ECUs)of cars to improve the vehicle safety in several ways.These models are often working with full empirical methods,leading to large deviations between calculation and measurement.To meet the requirements of automotive safety integrity levels(ASILs),these thermal models cannot rely on the state of the art ambient air temperature sensors,which causes unacceptable deviations.Focusing on numerical efficient thermal simulations,a new approach of a semi-analytical thermal network for simulating the brake disc temperature with minimal effort is proposed.The thermal network is based on lumped parameters,using two thermal capacity nodes and a constant ambient temperature.Using semi-analytical correlations,the model can be adapted to different geometries and car lines effortlessly.The empirical parameters of the model result only from two standardized tests.These parameters are used to evaluate the estimation accuracy in real driving situations.Additionally,the adaptability is tested for two different car lines and four brake disc dimensions.These tests are initially performed with unchanged parameters and afterwards with refitted parameters.The model shows a good estimation for the tested load cases.Compared to the state of the art,the proposed model is less accurate than complex finite element method(FEM)models and computational fluid dynamic(CFD)approaches,but shows a higher accuracy and better adaptability than other lumped parameter models with comparable numerical effort.Hence,possible applications can be dimensioning the brake system in the development process of new car lines or a real-time simulation on the latest ECU in the vehicle.展开更多
In this study, n-butanol-diesel blends were burned in a turbo-charged, direct injection diesel engine where the brake thermal efficiency, (BTE) or brake specific fuel consumption, (BSFC) was compared with that of etha...In this study, n-butanol-diesel blends were burned in a turbo-charged, direct injection diesel engine where the brake thermal efficiency, (BTE) or brake specific fuel consumption, (BSFC) was compared with that of ethanol-diesel or methanol-diesel blends in another study by other authors. The test blends used were B5, B10 and B20 (where B5 is 5% n-butanol by volume and 95% diesel fuel-DF). In this study, the BTE was higher and the BSFC improved more than in the other study. Because of improved BTE with increasing brake mean effective pressure, BMEP, the BSFC reduced, however the increased shared volume of n-butanol in DF increased BSFC. Adding n-butanol in DF slightly derated the torque, brake power output with increasing speed, and caused a fall in exhaust gas temperatures, (EGT) which improves the volumetric efficiency and reduces compression work. Therefore, a small-shared volume of n-butanol in DF fired in a turbo-charged diesel engine performs better in terms of BTE and BSFC than that of ethanol or methanol blending in DF.展开更多
Cape Chestnut oil was processed to biodiesel through transesterification. Cape Chestnut kennels are reported to have oil content of 60% - 63% [1]. Properties of biodiesel were determined and compared with those of die...Cape Chestnut oil was processed to biodiesel through transesterification. Cape Chestnut kennels are reported to have oil content of 60% - 63% [1]. Properties of biodiesel were determined and compared with those of diesel and engine tests done at a constant speed of 1500 RPM on the biodiesel blends to evaluate their performance and emissions characteristics. Performance evaluation was in terms of Brake Specific Fuel Consumption (BSFC), Brake Horse Power (BHP) and Brake Thermal Efficiency (ETE). The engine was initially run on diesel to establish the reference characteristics before running on biodiesel blends. The biodiesel was blended with diesel volumetrically to 80% (B80), 50% (B50), 20% (B20) and 5% (B5) the percentage being the volume of biodiesel in the blended fuel. Diesel fuel had the lowest BSFC followed by B5 whose BSFC was 7.3% higher than that of diesel. BTE for B100 was lower than that of diesel by 20.3% while that of B5 was 7.6% lower. Concentration of SO2 in B100 was 92.7% lower than that of diesel fuel while that of B20 was 24.7% lower. NO and NO2 concentrations for B100 were around 15% higher than that of diesel. Particulate matter of less than 10 μm diameter (PM10) for diesel was found to be 72% of the total collected from all the test fuels as compared to that of biodiesel blends at 28%. The study concluded that Cape Chestnut biodiesel blends containing up to 20% biodiesel can be used in an unmodified diesel engine since their performance and emission characteristics were very similar to that of diesel but with reduced toxic gas emissions therefore friendly to the environment.展开更多
基金the first publication on the Eurobrake Conference in Dresden Germany in Mai 2019It was only published for the participants of the conference.
文摘The simulation of the brake disc temperature is an important tool in the development of passenger cars.Nowadays thermal models of brake discs are real-time applications,running on electronic control units(ECUs)of cars to improve the vehicle safety in several ways.These models are often working with full empirical methods,leading to large deviations between calculation and measurement.To meet the requirements of automotive safety integrity levels(ASILs),these thermal models cannot rely on the state of the art ambient air temperature sensors,which causes unacceptable deviations.Focusing on numerical efficient thermal simulations,a new approach of a semi-analytical thermal network for simulating the brake disc temperature with minimal effort is proposed.The thermal network is based on lumped parameters,using two thermal capacity nodes and a constant ambient temperature.Using semi-analytical correlations,the model can be adapted to different geometries and car lines effortlessly.The empirical parameters of the model result only from two standardized tests.These parameters are used to evaluate the estimation accuracy in real driving situations.Additionally,the adaptability is tested for two different car lines and four brake disc dimensions.These tests are initially performed with unchanged parameters and afterwards with refitted parameters.The model shows a good estimation for the tested load cases.Compared to the state of the art,the proposed model is less accurate than complex finite element method(FEM)models and computational fluid dynamic(CFD)approaches,but shows a higher accuracy and better adaptability than other lumped parameter models with comparable numerical effort.Hence,possible applications can be dimensioning the brake system in the development process of new car lines or a real-time simulation on the latest ECU in the vehicle.
文摘In this study, n-butanol-diesel blends were burned in a turbo-charged, direct injection diesel engine where the brake thermal efficiency, (BTE) or brake specific fuel consumption, (BSFC) was compared with that of ethanol-diesel or methanol-diesel blends in another study by other authors. The test blends used were B5, B10 and B20 (where B5 is 5% n-butanol by volume and 95% diesel fuel-DF). In this study, the BTE was higher and the BSFC improved more than in the other study. Because of improved BTE with increasing brake mean effective pressure, BMEP, the BSFC reduced, however the increased shared volume of n-butanol in DF increased BSFC. Adding n-butanol in DF slightly derated the torque, brake power output with increasing speed, and caused a fall in exhaust gas temperatures, (EGT) which improves the volumetric efficiency and reduces compression work. Therefore, a small-shared volume of n-butanol in DF fired in a turbo-charged diesel engine performs better in terms of BTE and BSFC than that of ethanol or methanol blending in DF.
文摘Cape Chestnut oil was processed to biodiesel through transesterification. Cape Chestnut kennels are reported to have oil content of 60% - 63% [1]. Properties of biodiesel were determined and compared with those of diesel and engine tests done at a constant speed of 1500 RPM on the biodiesel blends to evaluate their performance and emissions characteristics. Performance evaluation was in terms of Brake Specific Fuel Consumption (BSFC), Brake Horse Power (BHP) and Brake Thermal Efficiency (ETE). The engine was initially run on diesel to establish the reference characteristics before running on biodiesel blends. The biodiesel was blended with diesel volumetrically to 80% (B80), 50% (B50), 20% (B20) and 5% (B5) the percentage being the volume of biodiesel in the blended fuel. Diesel fuel had the lowest BSFC followed by B5 whose BSFC was 7.3% higher than that of diesel. BTE for B100 was lower than that of diesel by 20.3% while that of B5 was 7.6% lower. Concentration of SO2 in B100 was 92.7% lower than that of diesel fuel while that of B20 was 24.7% lower. NO and NO2 concentrations for B100 were around 15% higher than that of diesel. Particulate matter of less than 10 μm diameter (PM10) for diesel was found to be 72% of the total collected from all the test fuels as compared to that of biodiesel blends at 28%. The study concluded that Cape Chestnut biodiesel blends containing up to 20% biodiesel can be used in an unmodified diesel engine since their performance and emission characteristics were very similar to that of diesel but with reduced toxic gas emissions therefore friendly to the environment.