A Miniaturized Broadband Wilkinson Power Divider Using Micro-Strip Branch Lines

A miniaturized broadband Wilkinson power divider is proposed. Micro-strip branch lines are introduced to replace multiple resistors used in multi-stage Wilkinson power dividers to increase the bandwidth of single-stage Wilkinson power dividers. To demonstrate its performance, an improved single-stage Wilkinson power divider with four micro-strip branch lines was designed. Simulated results show that the insert loss is better than 3.2 dB, the input return loss, output return loss, and isolation are better than 15 dB respectively, across a 76% bandwidth from 18 to 40 GHz. .

Maintenance Engineering Department of China Eastern Jiangxi Branch Establishing the First Line of Defense for Safe Flight

Maintenance Engineering Department of China Eastern Jiangxi Branch has 130 employees and manages four Airbuses A319 and two A320s. seen from the ratio of man to plane, it is the lowest among China Eastern branches (subsidiaries). Due to the requirement of the air market, the six planes are arranged separately in Nanchang, Shanghai, Fuzhou and Ningbo, thus the six planes are maintained in four places, which is unique among China

Analytical solution based on the wavenumber integration method for the acoustic field in a Pekeris waveguide

An exact solution based on the wavenumber integration method is proposed and implemented in a numerical model for the acoustic field in a Pekeris waveguide excited by either a point source in cylindrical geometry or a line source in plane geometry. Besides, an unconditionally stable numerical solution is also presented, which entirely resolves the stability problem in previous methods. Generally the branch line integral contributes to the total field only at short ranges, and hence is usually ignored in traditional normal mode models. However, for the special case where a mode lies near the branch cut, the branch line integral can contribute to the total field significantly at all ranges. The wavenumber integration method is well-suited for such problems. Numerical results are also provided, which show that the present model can serve as a benchmark for sound propagation in a Pekeris waveguide.

Polarization Reconfigurable Patch Antenna for Wireless Power Transfer Related Applications

A polarized reconfigurable patch antenna is proposed in this paper.The proposed antenna is a dual cross-polarized patch antenna with a programmable power divider.The programmable power divider consists of two branch line couplers(BLC)and a digital phase shifter.By adjusting the phase of the phase shifter,the power ratio of the power divider can be changed,and thus the feed power to the antenna input port can be changed to reconfigure the antenna polarization.The phase-controlled power divider and the cross dual-polarized antenna are designed,fabricated and tested,and then they are combined to realize the polarized reconfigurable antenna.By moving the phase of the phase shifter,the antenna polarization is reconfigured into vertical polarization(VP),horizontal polarization(HP),and circular polarization(CP).The test is conducted at the frequency of 915 MHz,which is widely used for simultaneous wireless information and power transfer(SWIPT)in radio-frequency identification(RFID)applications.The results demonstrate that when the antenna is configured as CP,the axial ratio of the antenna is less than 3 dB,and when the antenna is configured as HP or VP,the axial ratio of the antenna exceeds 20 dB.Finally,experiments are conducted to verify the influence of antenna polarization changes on wireless power transmitting.As expected,the reconfigured antenna polarization can help improve the power transmitting efficiency.