Pulsed breakdown of dry air at ambient pressure has been investigated in the point-plane geometry, using repetitive nanosecond pulses with 10 ns risetime, 20-30 ns duration, and up to 100 kV amplitude. A major concern...Pulsed breakdown of dry air at ambient pressure has been investigated in the point-plane geometry, using repetitive nanosecond pulses with 10 ns risetime, 20-30 ns duration, and up to 100 kV amplitude. A major concern in this paper is to study the dependence of breakdown strength on the point-electrode polarity. Applied voltage, breakdown current and repetitive stressing time are measured under the experimental conditions of some variables including pulse voltage peak, gap spacing and repetition rate. The results show that increasing the E-field strength can decrease breakdown time lag, repetitive stressing time and the number of applied pulses as expected. However, compared with the traditional polarity dependence it is weakened and not significant in the repetitive nanosecond-pulse breakdown. The ambiguous polarity dependence in the experimental study is involved with an accumulation effect of residual charges and metastable states. Moreover, it is suggested that the reactions associated with the detachment of negative ions and impact deactivation of metastable species could provide a source of primary initiating electrons for breakdown.展开更多
High repetition rate laser-ablation spark-induced breakdown spectroscopy(HRR LA-SIBS) was first used to analyze trace elements in copper alloy samples. The 1064 nm output of an acoustooptically Q-switched Nd:YAG laser...High repetition rate laser-ablation spark-induced breakdown spectroscopy(HRR LA-SIBS) was first used to analyze trace elements in copper alloy samples. The 1064 nm output of an acoustooptically Q-switched Nd:YAG laser operated at a pulse repetition rate of 1 kHz was utilized to ablate copper alloy and to form original plasma, spark-discharge was applied to further breakdown the ablated samples and enhance the emission of the laser-induced plasma. A compact multichannel fiber spectrometer was used to analyze the plasma emission under nongated operation mode. Under the assistance of high repetition rate spark discharge, the plasma emission was able to be improved significantly. The determined limits of the detection of lead and aluminum were 15.5 ppm and 1.9 ppm by HRR LA-SIBS, respectively, which were 11 and 6 folds better than that determined by HRR LIBS under the same laser-ablation condition. This work demonstrates the feasibility of using fiber spectrometer to analyze plasma emission under non-gated operation mode and the possibility of building a portable HRR LA-SIBS system for rapid elemental analysis of copper alloys and other solid samples.展开更多
基金Project supported by the National Natural Science Foundation of China （Grant Nos 50207011 and 50437020）.
文摘Pulsed breakdown of dry air at ambient pressure has been investigated in the point-plane geometry, using repetitive nanosecond pulses with 10 ns risetime, 20-30 ns duration, and up to 100 kV amplitude. A major concern in this paper is to study the dependence of breakdown strength on the point-electrode polarity. Applied voltage, breakdown current and repetitive stressing time are measured under the experimental conditions of some variables including pulse voltage peak, gap spacing and repetition rate. The results show that increasing the E-field strength can decrease breakdown time lag, repetitive stressing time and the number of applied pulses as expected. However, compared with the traditional polarity dependence it is weakened and not significant in the repetitive nanosecond-pulse breakdown. The ambiguous polarity dependence in the experimental study is involved with an accumulation effect of residual charges and metastable states. Moreover, it is suggested that the reactions associated with the detachment of negative ions and impact deactivation of metastable species could provide a source of primary initiating electrons for breakdown.
基金financially supported by National Basic Research Program (973 Program) of China under grant number 2012CB921900National Natural Science Foundation of China under grant numbers 11274123 and 11304100
文摘High repetition rate laser-ablation spark-induced breakdown spectroscopy(HRR LA-SIBS) was first used to analyze trace elements in copper alloy samples. The 1064 nm output of an acoustooptically Q-switched Nd:YAG laser operated at a pulse repetition rate of 1 kHz was utilized to ablate copper alloy and to form original plasma, spark-discharge was applied to further breakdown the ablated samples and enhance the emission of the laser-induced plasma. A compact multichannel fiber spectrometer was used to analyze the plasma emission under nongated operation mode. Under the assistance of high repetition rate spark discharge, the plasma emission was able to be improved significantly. The determined limits of the detection of lead and aluminum were 15.5 ppm and 1.9 ppm by HRR LA-SIBS, respectively, which were 11 and 6 folds better than that determined by HRR LIBS under the same laser-ablation condition. This work demonstrates the feasibility of using fiber spectrometer to analyze plasma emission under non-gated operation mode and the possibility of building a portable HRR LA-SIBS system for rapid elemental analysis of copper alloys and other solid samples.
