In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considere...In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considered.The main objective is an understanding of the effect of the current and various geometrical parameters on the reflection coefficient.The wave used in the study is based on potential theory,and the submerged structures consist of two rectangular breakwaters positioned at a fixed distance from each other and attached to the bottom of a wave flume.The numerical modeling approach employed in this work relies on the Boundary Element Method(BEM).The results are compared with experimental data to validate the approach.The findings of the study demonstrate that the double rectangular breakwater configuration exhibits superior wave attenuation abilities if compared to a single rectangular breakwater,particularly at low wavenumbers.Furthermore,the study reveals that wave mitigation is more pronounced when the current and wave propagation are coplanar,whereas it is less effective in the case of opposing current.展开更多
Rubble mound breakwaters with a crown wall are a common coastal engineering structure.The wave force on crown walls is an important parameter for the practice engineering design.Particularly,the wave force on crown wa...Rubble mound breakwaters with a crown wall are a common coastal engineering structure.The wave force on crown walls is an important parameter for the practice engineering design.Particularly,the wave force on crown walls under intermediate depths has been studied through physical model tests and numerical simulations.In this study,a three-dimensional numerical wave flume was developed to investigate monochromatic wave interactions in a rubble mound breakwater with a crown wall.Armor blocks were modeled in detail.The Navier-Stokes equations for two-phase incompressible flows,combined with shear stress transport k-ωturbulence model and volume of fluid method for tracking the free surface,were solved.A set of laboratory experiments were performed to validate the adopted model.Subsequently,a series of numerical simulations were implemented to examine the impacts of different hydrodynamic parameters(including wave height,incident wave period,and water depth)and the berm width on the wave force of the crown wall.Finally,a comparison of the experimental results and Martin method shows that the latter method is not suitable for this experimental scope.New empirical formulas are proposed to predict the wave force on crown walls under intermediate depth.The results can provide a basis for the design of crown wall of rubble mound breakwaters at intermediate depths.展开更多
The motion of the moored ship in the harbor is a classical hydrodynamics problem that still faces many challenges in naval operations,such as cargo transfer and ship pairings between a big transport ship and some smal...The motion of the moored ship in the harbor is a classical hydrodynamics problem that still faces many challenges in naval operations,such as cargo transfer and ship pairings between a big transport ship and some small ships.A mathematical model is presented based on the Laplace equation utilizing the porous breakwater to investigate the moored ship motion in a partially absorbing/reflecting harbor.The motion of the moored ship is described with the hydrodynamic forces along the rotational motion(roll,pitch,and yaw)and translational motion(surge,sway,and heave).The efficiency of the numerical method is verified by comparing it with the analytical study of Yu and Chwang(1994)for the porous breakwater,and the moored ship motion is compared with the theoretical and experimental data obtained by Yoo(1998)and Takagi et al.(1993).Further,the current numerical scheme is implemented on the realistic Visakhapatnam Fishing port,India,in order to analyze the hydrodynamic forces on moored ship motion under resonance conditions.The model incorporates some essential strategies such as adding a porous breakwater and utilizing the wave absorber to reduce the port’s resonance.It has been observed that these tactics have a significant impact on the resonance inside the port for safe maritime navigation.Therefore,the current numerical model provides an efficient tool to reduce the resonance within the arbitrarily shaped ports for secure anchoring.展开更多
In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, w...In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, were used to calculate the wave height transformation and the mean water level change around a submerged breakwater. The numerical solution is verified with experimental data. The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall. In contrast to cases without a seawall, the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall. Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater. We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up.展开更多
The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to e...The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.展开更多
The results of design and experiment of a submerged semi-circular breakwater at the Yangtze estuary show that the submerged structure will be unsafe when the general empirical wave force formula for semi-circular brea...The results of design and experiment of a submerged semi-circular breakwater at the Yangtze estuary show that the submerged structure will be unsafe when the general empirical wave force formula for semi-circular breakwater is used in design. Therefore, a new calculation method for the wave forces acting on a submerged semi-circular structure is given in this paper, in which the wave force acting on the inside circumference of semi-circular arch is included, and the phase modification coefficient in the general empirical formula is adjusted as well. The new wave force calculation method has been Verified by the results of seven related physical model tests and adopted in the design of the south esturary jetty of the first stage project of Deep Channel Improvement Project of the Yangtze River Estuary, the total jetty length being 17.5 km.展开更多
Quarter circular breakwater (QCB) is a new-type breakwater developed from senti-circular breakwater (SCB). The superstructure of QCB is composed of a quarter circular front wall, a horizontal base slab and a verti...Quarter circular breakwater (QCB) is a new-type breakwater developed from senti-circular breakwater (SCB). The superstructure of QCB is composed of a quarter circular front wall, a horizontal base slab and a vertical rear wall. The width of QCB' s base slab is about half that of SCB, which makes QCB suitable to be used on relatively finn soil foundation. The numerical wave flume based on the Reynolds averaged Navier-Stokes equations for impressible viscosity fluid is adopted in this paper to simulate the hydraulic performances of QCB. Since the geometry of both breakwaters is similar and SCB has been studied in depth, the hydraulic performances of QCB are given in comparison with those of SCB.展开更多
The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impuls...The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.展开更多
In this paper, the hydrodynamic efficiency of a floating breakwater system is experimentally studied by use of physical models. Regular waves with wide ranges of wave heights and periods are tested. The efficiency of ...In this paper, the hydrodynamic efficiency of a floating breakwater system is experimentally studied by use of physical models. Regular waves with wide ranges of wave heights and periods are tested. The efficiency of the breakwater is presented as a function of the wave transmission, reflection, and energy dissipation coefficients. Different parameters affecting the breakwater efficiency are investigated, e.g. the number of the under connected vertical plates, the length of the mooring wire, and the wave length. It is found that, the transmission coefficient kt decreases with the increase of the relative breakwater width B/L, the number of plates n and the relative wire length l/h, while the reflection coefficient kr takes the opposite trend. Therefore, it is possible to achieve kt values smaller than 0.25 and kr values larger than 0.80 when B/L is larger than 0.25 for the case of l/h-1.5 and n=4. In addition, empirical equations used for estimating the transmission and reflection coefficients are developed by using the dimensionless analysis, regression analysis and measured data and verified by different theoretical and experimental results.展开更多
A series of regular and irregular wave experiments are conducted to study the reflective and transmitting performances of quarter circular breakwater (QCB) in comparison with those of semi-circular breakwater (SCB...A series of regular and irregular wave experiments are conducted to study the reflective and transmitting performances of quarter circular breakwater (QCB) in comparison with those of semi-circular breakwater (SCB). Based on regular wave tests, the reflection and transmission characteristics of QCB are analyzed and a few influencing factors are investigated. Then, the wave energy dissipation as wave passing over the breakwater is discussed based on the hydraulic coefficients of QCB and SCB. In irregular wave experiments, the reflection coefficients of QCB and their spectrums are studied. Finally, the comparisons between the experimental results and numerical simulations for QCB under regular and irregular wave conditions are presented.展开更多
Surface or submerged horizontal or vertical plate can be considered as a new concept breakwater. This paper investigates the wave-plate interaction of this type of breakwater by use of the boundary element method. The...Surface or submerged horizontal or vertical plate can be considered as a new concept breakwater. This paper investigates the wave-plate interaction of this type of breakwater by use of the boundary element method. The relationships of wave transmitted and reflected among plate thickness, submergence and length are carefully studied by numerical simulation. It is shown that: (1) The transmitted coefficients of submerged horizontal plate or vertical plate will become larger with the increase of plate thickness and reduce rapidly with the decrease of plate submergence. (2) Both surface horizontal and vertical plate are efficient for intermediate and short wave elimination, but vertical plate is more effective. (3) Submerged horizontal plate can act more effectively than submerged vertical plate does. With all wave frequencies, the vertical plate almost has no wave elimination effect.展开更多
The numerical investigation of regular waves interacting with a submerged horizontal twin-plate breakwater is pre- sented in this paper. A numerical model with an absorbing wave-maker is established based on the VOF m...The numerical investigation of regular waves interacting with a submerged horizontal twin-plate breakwater is pre- sented in this paper. A numerical model with an absorbing wave-maker is established based on the VOF method. The validity of the model is verified by experimental results. Comparisons between the numerical and experimental results show that beth the water surface profiles and the wave-induced pressures can be modeled accurately. Wave deformation over the breakwater, water particle velocities around the breakwater, and the wave-induced pressures on the structure are nu- merically investigated. Tile pressure amplitudes of the fundamental and second harmonies on the model surface are exanl- ined in various water depths. The computed and experimental results have revealed that the higher frequency components are generated at the onshore side of the breakwater. Furthermore, the computed results demonstrate a circulating flow formed at the onshore side of the breakwater.展开更多
This paper investigates the hydrodynamic performance of a cylindrical-dual or rectangular-single pontoon floating breakwater using the numerical method and experimental study. The numerical simulation work is based on...This paper investigates the hydrodynamic performance of a cylindrical-dual or rectangular-single pontoon floating breakwater using the numerical method and experimental study. The numerical simulation work is based on the multi-physics computational fluid dynamics(CFD) code and an innovative full-structured dynamic grid method applied to update the three-degree-of-freedom(3-DOF) rigid structure motions. As a time-marching scheme, the trapezoid analogue integral method is used to update the time integration combined with remeshing at each time step.The application of full-structured mesh elements can prevent grids distortion or deformation caused by large-scale movement and improve the stability of calculation. In movable regions, each moving zone is specified with particular motion modes(sway, heave and roll). A series of experimental studies are carried out to validate the performance of the floating body and verify the accuracy of the proposed numerical model. The results are systematically assessed in terms of wave coefficients, mooring line forces, velocity streamlines and the 3-DOF motions of the floating breakwater. When compared with the wave coefficient solutions, excellent agreements are achieved between the computed and experimental data, except in the vicinity of resonant frequency. The velocity streamlines and wave profile movement in the fluid field can also be reproduced using this numerical model.展开更多
In this study, solitary waves passing over a submerged breakwater are investigated both experimentally and numerically. A total of 9 experimental conditions are carried out, including different incident wave heights a...In this study, solitary waves passing over a submerged breakwater are investigated both experimentally and numerically. A total of 9 experimental conditions are carried out, including different incident wave heights and water depths. Numerical simulations are performed using a high-order finite-difference model solving Navier–Stokes (N–S) equations. The predicted water wave elevation, velocity and pressure show good agreement with experimental data, verifying the accuracy and capacity of the numerical model. Furthermore, parametric studies are conducted by numerical modelling to examine the effects of the geometrical features of submerged dike on hydrodynamic characteristics around the breakwater.展开更多
In the present work, the improved version of the meshless singular boundary method(ISBM) is developed for analyzing the performance of bottom standing submerged permeable breakwaters in regular normally incident waves...In the present work, the improved version of the meshless singular boundary method(ISBM) is developed for analyzing the performance of bottom standing submerged permeable breakwaters in regular normally incident waves and in the proximity of a vertical wall. Both single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with appropriate mixed type boundary conditions, and solved numerically using the ISBM. To model the permeability of the breakwaters fully absorbing boundary conditions are assumed. Numerical results are presented in terms of hydrodynamic quantities of the reflection coefficients. These are firstly validated against the results of a multi-domain boundary element method(BEM) developed independently for a previous study. The agreement between the results of the two methods is excellent. The coefficients of reflection are then computed and discussed for a variety of structural conditions including the breakwaters height, width, spacing, and absorbing permeability. Effects of the proximity of the vertical plane wall are also investigated. The breakwater's width is found to have only marginal effects compared with its height. Permeability tends to decrease the minimum reflections. These coefficients show periodic variations with the spacing relative to the wavelength. Trapezoidal breakwaters are found to be more cost-effective than the rectangular breakwaters. Dual breakwater systems are confirmed to perform much better than single structures.展开更多
A comprehensive experimental study was carried out on the regular wave attenuation with a trapezoidal pontoontype floating breakwater(FB) in deep water. The functionalities of two simple FB geometries consist of a rec...A comprehensive experimental study was carried out on the regular wave attenuation with a trapezoidal pontoontype floating breakwater(FB) in deep water. The functionalities of two simple FB geometries consist of a rectangle and a trapezoid with the slope of 60° were investigated under the wave attack. A two-dimensional wave flume was used in the experiment; the incident, transmitted waves, mooring line forces and motion responses of the floating breakwaters were measured. Also the influence of the sea state conditions(incident wave height and wave period)and structural parameters(draught of the structure) were investigated using the trapezoidal FB. Our experimental results indicated that the trapezoidal FB significantly reduced the wave transmission and mooring line force when compared with rectangular FBs. A new formula was developed in order to predict the value of the transmission coefficient in trapezoidal FBs with the slope of 60°. Experimental data showed to be consistent with the results of the formula.展开更多
A pile-restrained pontoon-plate floating breakwater is proposed in this paper. The laboratory physical-model tests are conducted to investigate the wave-dissipation property and heave-motion response of a model. The i...A pile-restrained pontoon-plate floating breakwater is proposed in this paper. The laboratory physical-model tests are conducted to investigate the wave-dissipation property and heave-motion response of a model. The influence of the model's geometric parameters including relative pontoon width, plate width, number of plates and pontoon draft on wavedissipation performance and heave-motion response are discussed, as well as the correlation between these two factors. The result indicates that wave-dissipation performance of the proposed structure is better than the pontoon structure: its transmission coefficient and heave-motion height are reduced by 0.2 and 0.3, respectively, in comparison with those of the pile-restrained pontoon model at a relative pontoon width of 0.2.展开更多
An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters. In the process of analysis, the tloating breakwater is assumed to be rigid, thin, vertical, and immovabl...An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters. In the process of analysis, the tloating breakwater is assumed to be rigid, thin, vertical, and immovable and located in water with constant depth. The fluid domain is divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunction in the context of linear theory. By satisfying continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations can be obtained to determine the unknown coefficients for eigenfunction expansions. The accuracy of the present model was verified by a comparison with existing results for the case of arc-shaped floating breakwater. Numerical results, in the form of contour maps of the non-dimensional wave amplitude around the breakwater and diffracted wave amplitude at typical sections, are presented for a range of wave and breakwater parameters. Results show that the sheltering effects on the arc-shaped floating perforated breakwater are closely related to the incident wavelength, the draft and the porosity of the breakwater.展开更多
The characteristics of wave transmission, reflection and energy dissipation of comb-type caisson breakwaters are studied through laboratory physical model tests. Regular and irregular waves, with a wide range of wave ...The characteristics of wave transmission, reflection and energy dissipation of comb-type caisson breakwaters are studied through laboratory physical model tests. Regular and irregular waves, with a wide range of wave heights and periods and a constant water depth, are considered. Different dimensions of each portion of the comb-type caisson breakwater are tested. Empirical formulae for calculating the reduction coefficient k, which is the ratio of horizontal wave force on unit length of the comb-type breakwater to that on unit length of the vertical wall breakwater, and for calculating the reflection coefficient of waves k, are obtained from the measurements. The comb-type caisson breakwater has been found to be very efficient in dissipating incident wave energy and in reducing wave reflection, and has already been used for the construction of an island breakwater in the Dayao Bay of Dalian Port, Liaoning Province, China. Compared with the cost of a common caisson breakwater, about 24.5% of the investment has been saved owing to the use of this comb-type breakwater.展开更多
In this study, characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical two-dimensional model are Rey...In this study, characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical two-dimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k - ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propagates over breakwater. When wave crest propagates over breakwater, the anticlockwise vortex may generate. On the contrary, when wave hollow propagates over breakwater, the clockwise vortex may generate. Meanwhile, the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy, turbulent dissipation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics.展开更多
文摘In this study,we focus on the numerical modelling of the interaction between waves and submerged structures in the presence of a uniform flow current.Both the same and opposite senses of wave propagation are considered.The main objective is an understanding of the effect of the current and various geometrical parameters on the reflection coefficient.The wave used in the study is based on potential theory,and the submerged structures consist of two rectangular breakwaters positioned at a fixed distance from each other and attached to the bottom of a wave flume.The numerical modeling approach employed in this work relies on the Boundary Element Method(BEM).The results are compared with experimental data to validate the approach.The findings of the study demonstrate that the double rectangular breakwater configuration exhibits superior wave attenuation abilities if compared to a single rectangular breakwater,particularly at low wavenumbers.Furthermore,the study reveals that wave mitigation is more pronounced when the current and wave propagation are coplanar,whereas it is less effective in the case of opposing current.
基金supported by the National Natural Science Foundation of China–Shandong Joint Fund(No.U1706226)the National Natural Science Foundation of China(No.52171284).
文摘Rubble mound breakwaters with a crown wall are a common coastal engineering structure.The wave force on crown walls is an important parameter for the practice engineering design.Particularly,the wave force on crown walls under intermediate depths has been studied through physical model tests and numerical simulations.In this study,a three-dimensional numerical wave flume was developed to investigate monochromatic wave interactions in a rubble mound breakwater with a crown wall.Armor blocks were modeled in detail.The Navier-Stokes equations for two-phase incompressible flows,combined with shear stress transport k-ωturbulence model and volume of fluid method for tracking the free surface,were solved.A set of laboratory experiments were performed to validate the adopted model.Subsequently,a series of numerical simulations were implemented to examine the impacts of different hydrodynamic parameters(including wave height,incident wave period,and water depth)and the berm width on the wave force of the crown wall.Finally,a comparison of the experimental results and Martin method shows that the latter method is not suitable for this experimental scope.New empirical formulas are proposed to predict the wave force on crown walls under intermediate depth.The results can provide a basis for the design of crown wall of rubble mound breakwaters at intermediate depths.
文摘The motion of the moored ship in the harbor is a classical hydrodynamics problem that still faces many challenges in naval operations,such as cargo transfer and ship pairings between a big transport ship and some small ships.A mathematical model is presented based on the Laplace equation utilizing the porous breakwater to investigate the moored ship motion in a partially absorbing/reflecting harbor.The motion of the moored ship is described with the hydrodynamic forces along the rotational motion(roll,pitch,and yaw)and translational motion(surge,sway,and heave).The efficiency of the numerical method is verified by comparing it with the analytical study of Yu and Chwang(1994)for the porous breakwater,and the moored ship motion is compared with the theoretical and experimental data obtained by Yoo(1998)and Takagi et al.(1993).Further,the current numerical scheme is implemented on the realistic Visakhapatnam Fishing port,India,in order to analyze the hydrodynamic forces on moored ship motion under resonance conditions.The model incorporates some essential strategies such as adding a porous breakwater and utilizing the wave absorber to reduce the port’s resonance.It has been observed that these tactics have a significant impact on the resonance inside the port for safe maritime navigation.Therefore,the current numerical model provides an efficient tool to reduce the resonance within the arbitrarily shaped ports for secure anchoring.
基金supported by The Science Council of Taiwan under Grant No. 95-2221-E-005-154
文摘In this study, we investigated wave transformation and wave set-up between a submerged permeable breakwater and a seawall. Modified time-dependent mild-slope equations, which involve parameters of the porous medium, were used to calculate the wave height transformation and the mean water level change around a submerged breakwater. The numerical solution is verified with experimental data. The simulated results show that modulations of the wave profile and wave set-up are clearly observed between the submerged breakwater and the seawall. In contrast to cases without a seawall, the node or pseudo-node of wave height evolution can be found between the submerged breakwater and the seawall. Higher wave set-up occurs if the nodal or pseudo-nodal point appears near the submerged breakwater. We also examined the influence of the porosity and friction factor of the submerged permeable breakwater on wave transformation and set-up.
基金by Joint Fund of the National Natural Science Foundation of China the Hong Kong Science Research Bureau (49910161985)+1 种基金the National Natural Science Foundation of China (50025924,50179004)the Research Fund for the Development of harbor engineeri
文摘The reflection of oblique incident waves from breakwaters with a partially-perforated front wall is investigated. The fluid domain is divided into two sub-domains and the eigenfunction expansion method is applied to expand velocity potentials in each domain. In the eigen-expansion of the velocity potential, evanescent waves are included. Numerical results of the present model are compared with experimental data. The effect of porosity, the relative chamber width, the relative water depth in the wave absorbing chamber and the water depth in front of the structure are discussed.
文摘The results of design and experiment of a submerged semi-circular breakwater at the Yangtze estuary show that the submerged structure will be unsafe when the general empirical wave force formula for semi-circular breakwater is used in design. Therefore, a new calculation method for the wave forces acting on a submerged semi-circular structure is given in this paper, in which the wave force acting on the inside circumference of semi-circular arch is included, and the phase modification coefficient in the general empirical formula is adjusted as well. The new wave force calculation method has been Verified by the results of seven related physical model tests and adopted in the design of the south esturary jetty of the first stage project of Deep Channel Improvement Project of the Yangtze River Estuary, the total jetty length being 17.5 km.
基金supported by the National Natural Science Foundation of China(Grant No.50779045)
文摘Quarter circular breakwater (QCB) is a new-type breakwater developed from senti-circular breakwater (SCB). The superstructure of QCB is composed of a quarter circular front wall, a horizontal base slab and a vertical rear wall. The width of QCB' s base slab is about half that of SCB, which makes QCB suitable to be used on relatively finn soil foundation. The numerical wave flume based on the Reynolds averaged Navier-Stokes equations for impressible viscosity fluid is adopted in this paper to simulate the hydraulic performances of QCB. Since the geometry of both breakwaters is similar and SCB has been studied in depth, the hydraulic performances of QCB are given in comparison with those of SCB.
文摘The dynamic response behaviors of upright breakwaters under broken wave impact are analysed based on the mass-damper-spring dynamic system model. The effects of the mass, damping, stiffness, natural period, and impulse duration (or oscillation period) on the translation, rotation, sliding force, overturning moment, and corresponding dynamic amplifying factors are studied. It is concluded that the ampli-ying factors only depend on the ratio of the system natural period to impulse duration (or oscillation period) under a certain damping ratio. Moreover, the equivalent static approach to breakwater design is also discussed.
文摘In this paper, the hydrodynamic efficiency of a floating breakwater system is experimentally studied by use of physical models. Regular waves with wide ranges of wave heights and periods are tested. The efficiency of the breakwater is presented as a function of the wave transmission, reflection, and energy dissipation coefficients. Different parameters affecting the breakwater efficiency are investigated, e.g. the number of the under connected vertical plates, the length of the mooring wire, and the wave length. It is found that, the transmission coefficient kt decreases with the increase of the relative breakwater width B/L, the number of plates n and the relative wire length l/h, while the reflection coefficient kr takes the opposite trend. Therefore, it is possible to achieve kt values smaller than 0.25 and kr values larger than 0.80 when B/L is larger than 0.25 for the case of l/h-1.5 and n=4. In addition, empirical equations used for estimating the transmission and reflection coefficients are developed by using the dimensionless analysis, regression analysis and measured data and verified by different theoretical and experimental results.
基金supported by the National Natural Science Foundation of China (Grant No. 50779045)the Open Foundation of State Key Laboratory of Hydraulics and Mountain River Engineering (Grant No. 0710)+2 种基金the National Science Foundation for Post-Doctoral Scientists of China (Grant No. 20080440681)the Natural Science Foundation of Tianjin, China (Grant No. 10JCYBJC03700)the Scientific and Technologic Development Foundation of the Higher Education Institutions of Tianjin,China (Grant No. 20080906)
文摘A series of regular and irregular wave experiments are conducted to study the reflective and transmitting performances of quarter circular breakwater (QCB) in comparison with those of semi-circular breakwater (SCB). Based on regular wave tests, the reflection and transmission characteristics of QCB are analyzed and a few influencing factors are investigated. Then, the wave energy dissipation as wave passing over the breakwater is discussed based on the hydraulic coefficients of QCB and SCB. In irregular wave experiments, the reflection coefficients of QCB and their spectrums are studied. Finally, the comparisons between the experimental results and numerical simulations for QCB under regular and irregular wave conditions are presented.
基金supported by the Scientific Research Foundation for the Returned Overseas Chinese Scholars, Ministry of Education of China (Grant No. 2007[24])supported by Science and Technology Project of Dalian (Grant No. 2008A16GX248)
文摘Surface or submerged horizontal or vertical plate can be considered as a new concept breakwater. This paper investigates the wave-plate interaction of this type of breakwater by use of the boundary element method. The relationships of wave transmitted and reflected among plate thickness, submergence and length are carefully studied by numerical simulation. It is shown that: (1) The transmitted coefficients of submerged horizontal plate or vertical plate will become larger with the increase of plate thickness and reduce rapidly with the decrease of plate submergence. (2) Both surface horizontal and vertical plate are efficient for intermediate and short wave elimination, but vertical plate is more effective. (3) Submerged horizontal plate can act more effectively than submerged vertical plate does. With all wave frequencies, the vertical plate almost has no wave elimination effect.
基金supported by the National Natural Science Foundation of China ( Grant Nos .50921001 and 51079025)
文摘The numerical investigation of regular waves interacting with a submerged horizontal twin-plate breakwater is pre- sented in this paper. A numerical model with an absorbing wave-maker is established based on the VOF method. The validity of the model is verified by experimental results. Comparisons between the numerical and experimental results show that beth the water surface profiles and the wave-induced pressures can be modeled accurately. Wave deformation over the breakwater, water particle velocities around the breakwater, and the wave-induced pressures on the structure are nu- merically investigated. Tile pressure amplitudes of the fundamental and second harmonies on the model surface are exanl- ined in various water depths. The computed and experimental results have revealed that the higher frequency components are generated at the onshore side of the breakwater. Furthermore, the computed results demonstrate a circulating flow formed at the onshore side of the breakwater.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51579122,51609109,and 51622902)the Natural Science Found of Jiangsu Province(Grant No.BK20160556)+1 种基金the University Natural Science Research Project of Jiangsu Province(Grant No.16kjb70003)the Key Lab Foundation for Advanced Manufacturing Technology of Jiangsu Province(Grant No.CJ1506)
文摘This paper investigates the hydrodynamic performance of a cylindrical-dual or rectangular-single pontoon floating breakwater using the numerical method and experimental study. The numerical simulation work is based on the multi-physics computational fluid dynamics(CFD) code and an innovative full-structured dynamic grid method applied to update the three-degree-of-freedom(3-DOF) rigid structure motions. As a time-marching scheme, the trapezoid analogue integral method is used to update the time integration combined with remeshing at each time step.The application of full-structured mesh elements can prevent grids distortion or deformation caused by large-scale movement and improve the stability of calculation. In movable regions, each moving zone is specified with particular motion modes(sway, heave and roll). A series of experimental studies are carried out to validate the performance of the floating body and verify the accuracy of the proposed numerical model. The results are systematically assessed in terms of wave coefficients, mooring line forces, velocity streamlines and the 3-DOF motions of the floating breakwater. When compared with the wave coefficient solutions, excellent agreements are achieved between the computed and experimental data, except in the vicinity of resonant frequency. The velocity streamlines and wave profile movement in the fluid field can also be reproduced using this numerical model.
基金financially supported by the National Natural Science Foundation of China(Grant No.51679212)Zhejiang Provincial Natural Science Foundation of China(Grant No.LR16E090002)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.2018QNA4041)the Tang Scholar
文摘In this study, solitary waves passing over a submerged breakwater are investigated both experimentally and numerically. A total of 9 experimental conditions are carried out, including different incident wave heights and water depths. Numerical simulations are performed using a high-order finite-difference model solving Navier–Stokes (N–S) equations. The predicted water wave elevation, velocity and pressure show good agreement with experimental data, verifying the accuracy and capacity of the numerical model. Furthermore, parametric studies are conducted by numerical modelling to examine the effects of the geometrical features of submerged dike on hydrodynamic characteristics around the breakwater.
基金financially supported by the Direction Général des Enseignements et de la Formation Supérieure of Algeria(Grant CNEPRU No.G0301920140029)
文摘In the present work, the improved version of the meshless singular boundary method(ISBM) is developed for analyzing the performance of bottom standing submerged permeable breakwaters in regular normally incident waves and in the proximity of a vertical wall. Both single and dual prismatic breakwaters of rectangular and trapezoidal forms are examined. The physical problem is cast in terms of the Laplace equation governing an irrotational flow and incompressible fluid motion with appropriate mixed type boundary conditions, and solved numerically using the ISBM. To model the permeability of the breakwaters fully absorbing boundary conditions are assumed. Numerical results are presented in terms of hydrodynamic quantities of the reflection coefficients. These are firstly validated against the results of a multi-domain boundary element method(BEM) developed independently for a previous study. The agreement between the results of the two methods is excellent. The coefficients of reflection are then computed and discussed for a variety of structural conditions including the breakwaters height, width, spacing, and absorbing permeability. Effects of the proximity of the vertical plane wall are also investigated. The breakwater's width is found to have only marginal effects compared with its height. Permeability tends to decrease the minimum reflections. These coefficients show periodic variations with the spacing relative to the wavelength. Trapezoidal breakwaters are found to be more cost-effective than the rectangular breakwaters. Dual breakwater systems are confirmed to perform much better than single structures.
文摘A comprehensive experimental study was carried out on the regular wave attenuation with a trapezoidal pontoontype floating breakwater(FB) in deep water. The functionalities of two simple FB geometries consist of a rectangle and a trapezoid with the slope of 60° were investigated under the wave attack. A two-dimensional wave flume was used in the experiment; the incident, transmitted waves, mooring line forces and motion responses of the floating breakwaters were measured. Also the influence of the sea state conditions(incident wave height and wave period)and structural parameters(draught of the structure) were investigated using the trapezoidal FB. Our experimental results indicated that the trapezoidal FB significantly reduced the wave transmission and mooring line force when compared with rectangular FBs. A new formula was developed in order to predict the value of the transmission coefficient in trapezoidal FBs with the slope of 60°. Experimental data showed to be consistent with the results of the formula.
基金supported by the National Natural Science Foundation of China(Grant No.50479054)
文摘A pile-restrained pontoon-plate floating breakwater is proposed in this paper. The laboratory physical-model tests are conducted to investigate the wave-dissipation property and heave-motion response of a model. The influence of the model's geometric parameters including relative pontoon width, plate width, number of plates and pontoon draft on wavedissipation performance and heave-motion response are discussed, as well as the correlation between these two factors. The result indicates that wave-dissipation performance of the proposed structure is better than the pontoon structure: its transmission coefficient and heave-motion height are reduced by 0.2 and 0.3, respectively, in comparison with those of the pile-restrained pontoon model at a relative pontoon width of 0.2.
基金supported by the Natural Science Foundation of Jiangsu Province(Grant No.Bk2006013)the foundation of the State Key Laboratory of Ocean Engineering,Shanghai Jiao Tong University(Grant No.0907)the foundation of Engineering Institute of Engineering Corps and PLA University of Science & Technology
文摘An analytical method is developed to study the sheltering effects on arc-shaped floating perforated breakwaters. In the process of analysis, the tloating breakwater is assumed to be rigid, thin, vertical, and immovable and located in water with constant depth. The fluid domain is divided into two regions by imaginary interface. The velocity potential in each region is expanded by eigenfunction in the context of linear theory. By satisfying continuity of pressure and normal velocity across the imaginary fluid interface, a set of linear algebraic equations can be obtained to determine the unknown coefficients for eigenfunction expansions. The accuracy of the present model was verified by a comparison with existing results for the case of arc-shaped floating breakwater. Numerical results, in the form of contour maps of the non-dimensional wave amplitude around the breakwater and diffracted wave amplitude at typical sections, are presented for a range of wave and breakwater parameters. Results show that the sheltering effects on the arc-shaped floating perforated breakwater are closely related to the incident wavelength, the draft and the porosity of the breakwater.
基金This paper presents part of the achievement in the China National Key Project"Construction Techniques for Breakwa-ters in Deep Water"(96-415-02-03)
文摘The characteristics of wave transmission, reflection and energy dissipation of comb-type caisson breakwaters are studied through laboratory physical model tests. Regular and irregular waves, with a wide range of wave heights and periods and a constant water depth, are considered. Different dimensions of each portion of the comb-type caisson breakwater are tested. Empirical formulae for calculating the reduction coefficient k, which is the ratio of horizontal wave force on unit length of the comb-type breakwater to that on unit length of the vertical wall breakwater, and for calculating the reflection coefficient of waves k, are obtained from the measurements. The comb-type caisson breakwater has been found to be very efficient in dissipating incident wave energy and in reducing wave reflection, and has already been used for the construction of an island breakwater in the Dayao Bay of Dalian Port, Liaoning Province, China. Compared with the cost of a common caisson breakwater, about 24.5% of the investment has been saved owing to the use of this comb-type breakwater.
基金The National Natural Science Foundation of China under contract Nos 50979008 and 50909009Program for Hunan Province Key Laboratory of WaterSediment Sciences & Flood Hazard Prevention and Open Research Fund Program of State Key Laboratory of Hydrology-Water Resources and Hydraulic Engineering,Hohai University No.2008490911
文摘In this study, characteristics of flow field and wave propagation near submerged breakwater on a sloping bed are investigated with numerical model. The governing equations of the vertical two-dimensional model are Reynolds Averaged Navier Stokes equations. The Reynolds stress terms are closed by a nonlinear k - ε turbulence transportation model. The free surface is traced through the PILC-VOF method. The proposed numerical model is verified with experimental results. The numerical result shows that the wave profile may become more asymmetrical when wave propagates over breakwater. When wave crest propagates over breakwater, the anticlockwise vortex may generate. On the contrary, when wave hollow propagates over breakwater, the clockwise vortex may generate. Meanwhile, the influenced zone of vortex created by wave crest is larger than that created by wave hollow. All the maximum values of the turbulent kinetic energy, turbulent dissipation and eddy viscosity occur on the top of breakwater. Both the turbulent dissipation and eddy viscosity increase as the turbulent kinetic energy increases. Wave energy may rapidly decrease near the breakwater because turbulent dissipation increases and energy in lower harmonics is transferred into higher harmonics.