Neutral Pion Electromagnetic Form Factor as a Bound System of 3 + 1 Dimensional QCD

We investigate a neutral pion electromagnetic form factor in momentum space and obtain Gaussian-like function for it. The characteristic form of our neutral pion electromagnetic form factor is consistent with the results published by Jefferson Lab Hall A Collaboration. .

Main controlling factor and mechanism of gas-in-place content of the Lower Cambrian shale from different sedimentary facies in the western Hubei area, South China

The Lower Cambrian shale gas in the western Hubei area,South China has a great resource prospect,but the gas-in-place(GIP)content in different sedimentary facies varies widely,and the relevant mechanism has been not well understood.In the present study,two sets of the Lower Cambrian shale samples from the Wells YD4 and YD5 in the western Hubei area,representing the deep-water shelf facies and shallowwater platform facies,respectively,were investigated on the differences of pore types,pore structure and methane adsorption capacity between them,and the main controlling factor and mechanism of their methane adsorption capacities and GIP contents were discussed.The results show that the organic matter(OM)pores in the YD4 shale samples are dominant,while the inorganic mineral(IM)pores in the YD5 shale samples are primary,with underdeveloped OM pores.The pore specific surface area(SSA)and pore volume(PV)of the YD4 shale samples are mainly from micropores and mesopores,respectively,while those of the YD5 shale samples are mainly from micropores and macropores,respectively.The methane adsorption capacity of the YD4 shale samples is significantly higher than that of the YD5 shale samples,with a maximum absolute adsorption capacity of 3.13 cm^(3)/g and 1.31 cm^(3)/g in average,respectively.Compared with the shallow-water platform shale,the deep-water shelf shale has a higher TOC content,a better kerogen type and more developed OM pores,which is the main mechanism for its higher adsorption capacity.The GIP content models based on two samples with a similar TOC content selected respectively from the Wells YD4 and YD5 further indicate that the GIP content of the deep-water shelf shale is mainly 34 m^(3)/t within a depth range of 1000—4000 m,with shale gas exploration and development potential,while the shallow-water platform shale has normally a GIP content of<1 m^(3)/t,with little shale gas potential.Considering the geological and geochemical conditions of shale gas formation and preservation,the deep-water shelf facies is the most favorable target for the Lower Cambrian shale gas exploration and development in the western Hubei area,South China.

Quantitative Evaluation of Heavy Metal Pollution and Its Influencing Factors in Water Bodies of Karst Areas

At present, there is relatively little research on the synergistic effects of heavy metals in soil, sediment, and bedrock on heavy metal pollution in water bodies. In this paper, heavy metals in soil, sediment, bedrock, and water of a typical karst watershed in southwest China were investigated. The results indicated that the average values of heavy metals in soil and sediment were relatively higher than those in bedrock except for Ni and As. During the research period, As and Cd were the main heavy metal elements polluting the soil and sediment in the study area, while water bodies were mainly polluted by Ni, As, and Cd. The pollution assessment indicated that there were instances of poor or very poor water quality in the study area during the study period;the soil as a whole was slightly polluted by Cd and As;sediment was subject to moderate Cd pollution and mild As pollution. Analysis of geochemical form for heavy metals showed that heavy metals in soil and sediment were mainly in residual form, and the proportions of exchangeable As and Cd were relatively high. Multiple statistical analysis showed that heavy metals in sediment, soil, and bedrock explained 23.8%, 16.8%, and 16.2% of the changes in heavy metals of water, respectively. The research results can provide scientific basis for the prevention and control of heavy metal pollution in water bodies.

New Formulation for Arbitrary Cracks Problem and Its Stress Intensity Factor of Plane Elasticity

Aim The general arbitrary cracked problem in an elastic plane was discussed. Methods For the purpose of acquiring the solution of the problem, a new formulation on the problem was proposed. Compared with the classical plane elastic crack model, only the known conditions were revised in the new formulation, which are greatly convenient to solve the problem, and no other new condition was given. Results and Conclusion The general exact analytic solution is given here based on the formulation though the problem is very complicated. Furthermore, the stress intensity factors K Ⅰ, K Ⅱ of the problem are also given.

CFD-Based Method of Determining Form Factor k for Different Ship Types and Different Drafts

The value of form factor k at different drafts is important in predicting full-scale total resistance and speed for different types of ships. In the ITTC community, most organizations predict form factor k using a low-speed model test. However, this method is problematic for ships with bulbous bows and transom. In this article, a Computational Fluid Dynamics(CFD)-based method is introduced to obtain k for different type of ships at different drafts, and a comparison is made between the CFD method and the model test. The results show that the CFD method produces reasonable k values. A grid generating method and turbulence model are briefly discussed in the context of obtaining a consistent k using CFD.

Numerical Study on Scale Effect of Form Factor for DTMB5415, KCS,KVLCC2, and 4000TEU Container Ship

Four ships,a twin-propeller naval ship,two single-propeller container ships,and a single-propeller very large crude carrier(VLCC),were studied to investigate the scale effect of the form factor.The viscous flow fields of the ships at different scales were solved numerically via the Reynolds-averaged Navier–Stokes method combined with the shear stress transport k–ωturbulence model.The numerical method was validated through comparisons with experimental data,and numerical uncertainty analysis was carried out based on the ITTC recommended procedure.On this basis,scale effects of the form factor were analyzed using different friction lines,and scale effects of flow fields and the mean axial wake fractions were further analyzed in details.The results showed that the form factor exhibited scale effects when adopting the ITTC-1957 line,and it increased with the increase in the Reynolds number.The scale effect of the form factor reduces the prediction precision of the full-scale ship resistance.The friction line has a significant effect on the form factor.The form factor exhibits little dependence on the Reynolds number when using the numerical friction line or the Katsui line,which is useful for full-scale ship resistance predictions.With the increasing Reynolds number,the boundary layer thickness becomes thinner and the axial velocity contour contracts toward the center plane,and there is nearly a linear relationship between the reciprocal of mean axial wake fraction on propeller disc and Reynolds number in logarithmic scale for the three types of ship forms.

Numerical Prediction of Form Factor and Wave Interference of A Trimaran for Different Outrigger Positions

Trimaran hydrodynamics have been an important research topic in recent years.Trimarans have even been chosen for naval surface combatants.In this case,investigation of a trimaran with different outrigger positions is important and necessary for better hydrodynamic performance.This paper focuses on the numerical investigation of trimaran hydrodynamics.The trimaran model used in this study is a 1/80 scale high-speed displacement frigate-type concept developed by the Center for Innovation in Ship Design(CISD)at Naval Surface Warfare Center,Carderock Division(NSWCCD).The numerical simulations were conducted for different outrigger positions at low and moderate Froude numbers by using commercial CFD software solving URANS equations.A verification and validation study was carried out for the numerical method in one configuration and one ship velocity.The existing experimental results for the trimaran resistance in the literature were used for validation.Five different outrigger positions were analyzed and the form factor of each configuration was calculated by the Prohaska method.The total resistance was decomposed to its components using the form factor.The interference factor was calculated for each configuration in terms of total resistance,residual resistance and wave resistance.Also,wave profiles using the longitudinal wave cuts in different locations were obtained both numerically and experimentally.It was concluded that the outrigger position had different effects on the interference,total resistance and wave profile at different Froude numbers.It was also shown that the CFD results were in good agreement with the experimental data in all configurations.In conclusion,this study presents the results of interference effects for different trimaran configurations in terms of wave resistance in addition to the total resistance and residual resistance.The numerical method was validated not only with the total resistance test data but also the longitudinal wave profiles along the hull.

能带结构中Form Factor的计算改进

在能带和磁性计算中，形状因数是一个很重要的量．为了较准确地反映不同的电子构形和不同的相互作用势，我们使用了Ｍｏｒｕｚｚｉ－Ｊａｎａｋ－Ｗｉｌｌｉａｍｓ给出的各种材料的电荷密度分布［１］，再利用密度泛函方法来改进体系的电子波函数，从而得到更好的结果。

Study on the Form Factor Estimation Method of High-Speed Catamaran with Asymmetrical Hulls

The method used to estimate the form factor of low-speed vessel will cause a large error when estimating the form factor of high-speed catamaran because of the interference effects. A method based on computational fluid dynamics( CFD) method is proposed to estimate the form factor of high-speed catamaran with asymmetrical hulls. This paper focused on a 2000-toners catamaran with asymmetrical hulls to compare the difference between normal method and CFD method. The resistance of this catamaran is calculated by the CFD method,and it was compared to the model test data to verify the validity of this method. The form factors calculated by CFD method are very different from the results calculated by Prohaska method in high speed area.Thus,the method used to estimate the form factor of low-speed vessel is not applicative for high-speed catamaran. It is more accurate and efficient when using the CFD method to estimate the form factor of high-speed catamaran with asymmetrical hulls.

Minocycline inhibits the production of the precursor form of nerve growth factor by retinal microglial cells

A rat model of acute ocular hypertension was established by enhancing the perfusion of balanced salt solution in the anterior chamber of the right eye. Minocycline （90 mg/kg） was administered intraperitoneally into rats immediately after the operation for 3 consecutive days. Immunofluorescence, western blot assay and PCR detection revealed that the expression of the precursor form of nerve growth factor, nerve growth factor and the p75 neurotrophin receptor, and the mRNA expression of nerve growth factor and the p75 neurotrophin receptor, increased after acute ocular hypertension. The number of double-labeled CD11B- and precursor form of nerve growth factor-positive cells, glial fibrillary acidic protein- and p75 neurotrophin receptor-positive cells glial fibrillary acidic protein- and caspase-3-positive cells in the retina markedly increased after acute ocular hypertension. The above-described expression decreased after minocycline treatment. These results suggested that minocycline inhibited the increased expression of the precursor form of nerve growth factor in microglia, the p75 neurotrophin receptor in astroglia, and protected cells from apoptosis.

Closed form solution of stress intensity factors for cracks emanating from surface semi-spherical cavity in finite body with energy release rate method

In this paper, a new semi-analytical and semi-engineering method of the closed form solution of stress intensity factors （SIFs） of cracks emanating from a surface semi-spherical cavity in a finite body is derived using the energy release rate theory. A mode of crack opening displacements of a normal slice is established, and the normal slice relevant functions are introduced. The proposed method is both effective and accurate for the problem of three-dimensional cracks emanating from a surface cavity. A series of useful results of SIFs are obtained.

Form and Interconversion Factor of Selenium in Soil

In recent years,production and processing of natural selenium-rich agricultural products has become a research hotspot. The main factor affecting the selenium content in plant is the content of effective selenium in soil. So it is important to understand the form and conversion relationship of selenium in soil and find ways to improve selenium effectiveness. By summarizing the researches on selenium at home and abroad,we analyze the classification of soil selenium form,the transformation among different selenium forms and the improving factors of selenium effectiveness. We understand the relationship between chemical form and extraction form of selenium,analyze the driving factors of conversion among different forms,and discuss the ways to improve selenium effectiveness of soil in high selenium-rich area. By combining characteristics of soil and crop in different selenium-rich regions,different selenium activation methods are used,which could provide more scientific evidence for further selenium research.

Management disclosure of risk factors and COVID‑19

Public companies in the United States are required to file annual reports(i.e.,Form 10-K)and disclose,among other things,the risk factors that may harm their stock price.The risk of a pandemic was well-known before the recent crisis,and we now know that the initial impact on many shareholders was significant and negative.To what extent did managers forewarn their shareholders about this valuation risk?We examine all 10-K filings from 2018,before any knowledge of the current pandemic,and find that less than 21%of them contain any reference to pandemic-related terms.Given the management’s presumed in-depth knowledge of their business and the general awareness that pandemics have been identified as a significant global risk for at least the past decade,this number should have been higher.We find an unexpectedly posi-tive correlation(0.137)between the use of pandemic-related words in annual reports and realized stock returns during the actual pandemic at the industry level.Some industries most severely impacted by COVID-19 barely mentioned pandemic risk in their financial disclosures to shareholders,indicating that managers were ineffective in highlighting their exposure to pandemic risks to investors.

A Diquark-Quark Model with Its Use in Nucleon Form Factorst

The nucleon electromagnetic form factors are investigated within a simple diquark-quark model using the light-front formalism. In this model, baryon is described as a bound state of one quark and one clustering diquark. The calculational results are compared with the experimental ones. We also regard the quarks in a baryon as pointlike constituent quarks.

Local Quark-Hadron Duality and Magnetic Form Factors of Bound Proton

We discuss the consequence of local duality for elastic scattering, and derive a model-independent equation between structure functions at x ～ 1 and elastic electromagnetic form factors. Then the electromagnetic form factors of proton are discussed using the quark-hadron duality theory. We also debate the form factor of proton in a bound state.It may be an effective approach to study the form factor of proton in media.

Determining Nuclear Form factor for Detection of Dark Matter in Relativistic Mean Field Theory

In this work, we derive the nuclear form factor for the spin-independent collision between the WIMPs and nucleus in terms of the relativistic mean field （RMF） theory. Comparison with the traditional form factors which are commonly used in literature is given and it is found that our results are slightly above that of the 2PF model by 4% to 8%, but deviate from the Helm form factor by 15% to 25% for the whole recoil energy spectrum of 0 -100 keV. Moreover, taking Xe and Ge as examples, we show the dependence of the form Factor on the recoil energy.

Quantifying.Associations among Dimensions of Ears and Their Form Factors in Maize(Zea Mays)Using Dimensional Analysis

Ear morphological traits such as volume and shape are important features of maize and the quantitative associations among them can help understand kernel yield determination. 150 mature ears each of 4 maize cultivars were collected from field experiments, and ear length(L), diameter(D), area(S) and volume(V) were recorded for individual ears, kernel weight per ear also recorded for a portion of the examined ears. Following principles of dimensional analysis, 8 theoretical equations of 3 sets,which relate ear higher dimensions to its length and diameter, were developed and parameterized and validated with the field observations. The 3 optimized equations showed that the shape of ears in maize can be featured with 3 dimensionless form factors, namely diameter-to-length ratio(c=D/L), areal form factor(b=S/L/D), and volumetric form factor(a=V/L/D/D). Statistically,all of them were significantly different among cultivars, and a's values varied from 0.582 to 0.612, and b's 0.839-0.868, and c's 0.242-0.308. Volumetric form factor and areal form factor could estimate precisely ear volume and area respectively, but diameter-to-length ratio was not suitable to estimate ear diameter by its length. Ear volume explained almost all variation of ear kernel weight and product L*D*D did the same substantially. Dimensional analysis proved to be promising in understanding relationship among morphological traits of ears in maize. Its application in crop researches should improve our knowledge of the physical properties of crop plants.

Electric and Magnetic Form Factors of Proton in Relativistic Constituent QuarkModel

Based on relativistic constituent quark (RCQ) model, the electric and magnetic form factors are analyzed. The ratio of the two form factors for the proton , which is an image of its charge and magnetization distributions, is calculated in the light-front formulism of RCQ model. Recently, this ratio was measured at the Thomas Jefferson National Accelerator Facility (JLab) using the polarization technique. The new data presented span the range and are well described by a linear Q2 fit. Also, the ratio reaches a constant value while Q2 becomes larger than 2 (GeV)2. Our calculation results are presented and appear to be consistent with the experimental ones.

Nucleon Form Factors and N-△ Transitions in a Hypercentral Constituent Quark Model with Meson Cloud

We study the nucleon form factors and the nucleon-△（1232） transitions in a framework of hypercentral constituent quark model. The pion meson cloud effect is taken into account explicitly. Our results show that the pion cloud contributes substantially to the nucleon form factors as well as to the helicity amplitudes of △（1232）, and it gives an improved agreement compared to the experimental.

Proton and Neutron Electromagnetic Form Factors Based on Bound System in 3 + 1 Dimensional QCD

We propose a new description of a nucleon as a pair of pions. The baryon number of our description of nucleon is not 1 but 0. However, this is probable because the proton spin crisis shows that the baryon spin cannot tell the number of composing quarks anymore. Because we use the derived pion wave function to describe a nucleon, our description has automatically the pionic degree of freedom and can be compared to the constituent quark model. Using this description, we investigate the electric charge and magnetization density functions of protons and neutrons. The electric charge density function of neutron is quite similar to those of Galster model and Maints data except the magnitude of singularity. The density functions of proton also show the similar behavior as those of Kelly’s except near origin. Taking the Fourier transform of the density functions, we obtain the Sachs electromagnetic form factors that can be compared to those in the parametrization derived by Ye et al.