Using Geogrid-Reinforced Soil （GRS） we studied the working mechanism and design method of GRS at bridge approach with high backfill by field experiment. In a highway section where the height of backfill is 13.5 mete...Using Geogrid-Reinforced Soil （GRS） we studied the working mechanism and design method of GRS at bridge approach with high backfill by field experiment. In a highway section where the height of backfill is 13.5 meters, geogrids were used at two bridge approaches to address the bumping problems. Some soil pressure cells were used to measure the normal and lateral soil pressure at different locations in the roadbed. The experimental results indicate that geogrids in geogrid-reinforced soil （GRS） could produce an uplift force, the closer the location to the abutment, the larger the uplift force, and the reduction of measured soil pressures compared with theoretical values was the largest at the bottom of roadbed, less at the top than at the bottom, and the least in the mid-height of roadbed than at the bottom. These findings are different from those of the traditional greogrid-reinforced subgrade design method,展开更多
Railway transitions experience differential movements due to differences in track system stiffness,track damping characteristics,foundation type,ballast settlement from fouling and/or degradation,as well as fill and s...Railway transitions experience differential movements due to differences in track system stiffness,track damping characteristics,foundation type,ballast settlement from fouling and/or degradation,as well as fill and subgrade settlement.This differential movement is especially problematic for high speed rail infrastructure as the 'bump' at the transition is accentuated at high speeds.Identification of different factors contributing towards this differential movement,as well as development of design and maintenance strategies to mitigate the problem is imperative for the safe and economical operation of both freight and passenger rail networks.This paper presents the research framework and initial instrumentation details from an ongoing research effort at the University of Illinois at Urbana-Champaign.Three bridge approaches experiencing recurrent geometry problems were instrumented using multidepth deflectometers(MDDs) and strain gages to identify different factors contributing to the development of differential movements.展开更多
文摘Using Geogrid-Reinforced Soil （GRS） we studied the working mechanism and design method of GRS at bridge approach with high backfill by field experiment. In a highway section where the height of backfill is 13.5 meters, geogrids were used at two bridge approaches to address the bumping problems. Some soil pressure cells were used to measure the normal and lateral soil pressure at different locations in the roadbed. The experimental results indicate that geogrids in geogrid-reinforced soil （GRS） could produce an uplift force, the closer the location to the abutment, the larger the uplift force, and the reduction of measured soil pressures compared with theoretical values was the largest at the bottom of roadbed, less at the top than at the bottom, and the least in the mid-height of roadbed than at the bottom. These findings are different from those of the traditional greogrid-reinforced subgrade design method,
文摘Railway transitions experience differential movements due to differences in track system stiffness,track damping characteristics,foundation type,ballast settlement from fouling and/or degradation,as well as fill and subgrade settlement.This differential movement is especially problematic for high speed rail infrastructure as the 'bump' at the transition is accentuated at high speeds.Identification of different factors contributing towards this differential movement,as well as development of design and maintenance strategies to mitigate the problem is imperative for the safe and economical operation of both freight and passenger rail networks.This paper presents the research framework and initial instrumentation details from an ongoing research effort at the University of Illinois at Urbana-Champaign.Three bridge approaches experiencing recurrent geometry problems were instrumented using multidepth deflectometers(MDDs) and strain gages to identify different factors contributing to the development of differential movements.
