Seismic behavior of steel tubular bridge columns equipped with low-yield-point steel plates in the root replaceable pier

To enable rapid recovery of a steel bridge column after an earthquake,a novel tubular-section steel bridge column equipped with low-yield-point(LYP)steel tubular plates in the root replaceable pier is proposed.For the purpose of discussing the seismic behavior of the novel steel bridge column,quasi-static tests and finite element simulation analyses of the specimens were carried out.The effects of parameters such as the axial compression ratio,eccentricity,and thickness and material strength of the tubular plate in the energy-dissipating zone are discussed.Experimental results from seven specimens that were subjected to four failure modes are presented.The damage to the quasi-static specimens is localized to the replaceable energy-dissipating pier.The seismic behavior of the novel steel bridge columns is significantly influenced by the axial compression ratio and eccentricity of specimens.Numerical results show that the high stress area of the specimens is mainly concentrated in the connection zone between the LYP steel tubular plate and the bottom steel plate,which is consistent with the position of the quasi-static specimen when it was prone to fracture.Finally,a calculation formula is proposed to facilitate the capacity prediction of this new steel tubular bridge column under repeated loading.

Experimental study of hollow rectangular bridge column performance under vertical and cyclically bilateral loads

To investigate the seismic performance of hollow reinforced concrete （RC） bridge columns of rectangular cross section under constant axial load and cyclically biaxial bending, five specimens were tested. A parametric study is carried out for different axial load ratios, longitudinal reinforcement ratios and lateral reinforcement ratios. The experimental results showed that all tested specimens failed in the flexural failure mode and their ultimate performance was dominated by flexural capacity, which is represented by the rupture/buckling of tensile longitudinal rebars at the bottom of the bridge columns. Biaxial force and displacement hysteresis loops showed significant stiffness and strength degradations, and the pinching effect and coupling interaction effect of both directions severely decrease the structural seismic resistance. However, the measured ductility coefficient varying from 3.5 to 5.7 and the equivalent viscous damping ratio varying from 0.19 and 0.26 can meet the requirements of the seismic design. The hollow RC rectangular bridge columns with configurations of lateral reinforcement in this study have excellent performance under bidirectional earthquake excitations, and may be considered as a substitute for current hollow RC rectangular section configurations described in the Guideline for Seismic Design of Highway Bridges （JTG/T B02-01-2008）. The length of the plastic hinge region was found to approach one sixth of the hollow RC rectangular bridge column height for all specimen columns, and it was much less than those specified in the current JTG/T. Thus, the length of the plastic hinge region is more concentrated for RC rectangular hollow bridge columns.

Seismic performance of precast bridge columns connected with grouted corrugated-metal duct through biaxial quasi-static experiment and modeling

In this paper,the seismic behaviors of precast bridge columns connected with grouted corrugated-metal duct(GCMD)were investigated through the biaxial quasi-static experiment and numerical simulation.With a geometric scale ratio of 1:5,five specimens were fabricated,including four precast bridge columns connected with GCMD and one cast-in-place(CIP)bridge column.A finite element analysis model was also established by using OpenSees and was then calibrated by using the experimental results for parameter analysis.The results show the biaxial seismic performance of the precast bridge columns connected with GCMD was similar to the CIP bridge columns regarding ultimate bearing capacity and hysteresis energy,and further,that it could meet the design goal of equivalent performance.The seismic performance of the precast bridge columns connected with GCMD deteriorated more significantly under bi-directional load than under uni-directional load.A proper slenderness ratio(e.g.,7.0-10.0)and longitudinal reinforcement ratio could significantly improve the energy dissipation capacity and deformation capacity of the precast bridge columns,while the axial load ratio and concrete strength had little influence on the above properties.The research results could bring insights to the development of the seismic design of precast bridge columns connected with GCMD.

Earthquake simulation test of circular reinforced concrete bridge column under multidirectional seismic excitation

Structures behave multi-directionally when subjected to earthquake excitation. Thus, it is essential to evaluate the effect of multidirectional loading on the dynamic response and seismic performance of reinforced concrete bridge columns in order to develop more advanced and reliable design procedures. To investigate such effects, a 1/4 scaled circular reinforced concrete bridge column specimen was tested under two horizontal and one vertical components of a strong motion that has long duration with several strong pulses. Damage progress of reinforced concrete columns subjected to strong excitation was evaluated from the test. The test results demonstrate that the lateral force response in the principal directions become smaller than computed flexural capacity due to the bilateral flexural loading effects, and that the lateral response is not significantly affected by the fluctuation of the axial force because the horizontal response and axial force barely reached the maximum simultaneously due to difference of the predominant natural periods between the vertical and the horizontal directions. Accuracy of fiber analyses is discussed using the test results.

Residual drift spectra for RC bridge columns subjected to near-fault earthquakes

Permanent displacement of a bridge column can be directly measured during the inspection after near-fault earthquakes.However,the engineer needs to estimate the expected residual drift at the design stage to determine if the bridge seismic performance is satisfactory.The most direct method to estimate the residual displacement is nonlinear response history analysis,which is time consuming and cumbersome.Alternatively,an attractive but indirect method is generating estimated residual displacement spectra that depend on displacement ductility demand,column period,site conditions,and earthquake characteristics.Given the period and the expected displacement ductility demand for the column,the residual drift response spectra curves can be utilized to estimate the residual drift demand.Residual drift spectra that are applicable to RC bridge columns in different parts of the United States were developed based on nonlinear response history analyses using a comprehensive collection of recorded and synthetic near-fault ground motions and were linked to one-second spectral acceleration(S1)of the AASHTO maps.It was also found that the residual drift ratio is below one percent when S1 is less than 0.6 g.

Analytical investigations of seismic responses for reinforced concrete bridge columns subjected to strong near-fault ground motion

Strong near-fault ground motion, usually caused by the fault-rupture and characterized by a pulse-like velocity- wave form, often causes dramatic instantaneous seismic energy （Jadhav and Jangid 2006）. Some reinforced concrete （RC） bridge columns, even those built according to ductile design principles, were damaged in the 1999 Chi-Chi earthquake. Thus, it is very important to evaluate the seismic response of a RC bridge column to improve its seismic design and prevent future damage. Nonlinear time history analysis using step-by-step integration is capable of tracing the dynamic response of a structure during the entire vibration period and is able to accommodate the pulsing wave form. However, the accuracy of the numerical results is very sensitive to the modeling of the nonlinear load-deformation relationship of the structural member. FEMA 273 and ATC-40 provide the modeling parameters for structural nonlinear analyses of RC beams and RC columns. They use three parameters to define the plastic rotation angles and a residual strength ratio to describe the nonlinear load- deformation relationship of an RC member. Structural nonlinear analyses are performed based on these parameters. This method provides a convenient way to obtain the nonlinear seismic responses of RC structures. However, the accuracy of the numerical solutions might be further improved. For this purpose, results from a previous study on modeling of the static pushover analyses for RC bridge columns （Sung et al. 2005） is adopted for the nonlinear time history analysis presented herein to evaluate the structural responses excited by a near-fault ground motion. To ensure the reliability of this approach, the numerical results were compared to experimental results. The results confirm that the proposed approach is valid.

A review on close-in blast performance of RC bridge columns

In recent decades,the increase in terrorist attacks highlights the necessity and importance of understanding of structural performance under accidental and intentionally malicious blast loads.As an important part of transportation infrastructure,bridges would inevitably suffer explosion hazards especially close-in explosion.Reinforced concrete(RC)bridge column is the most critical components of bridge structures,which is more prone to severe local damage under the action of close-in blast loading and can lead to progressive collapse with catastrophic consequences in most cases.Therefore,the blast performance of RC bridge columns under close-in explosions is of particular concern.Towards a better RC bridge column protection against close-in blast loadings,efforts have been mainly devoted to understanding dynamic response predictions of RC columns,numerical simulation techniques of close-in explosion and damage assessment of blast-damaged RC columns.This article presents a state-of-the-art review of the research status of RC columns subjected to close-in blast loads.The blast loading,experimental study and failure mode,uncoupled and coupled simulation method,damage assessment based on residual axial capacity,vulnerability analysis and machine learning are considered and reviewed.The merits and defects of the existing approaches are discussed,and some suggestions for possible improvement are proposed.Further investigation into the future development of this topic has also been identified.

Dynamic response of precast segmental bridge columns under heavy truck impact

Considering the wide application of precast segmental bridge columns(PSBCs)in engineering practice,impact-resistant performance has gained significant attention.However,few studies have focused on PSBCs subjected to high-energy impacts caused by heavy truck collisions.Therefore,the behavior of PSBCs under a heavy truck impact was investigated in this study using high-fidelity finite element(FE)models.The detailed FE modeling methods of the PSBCs and heavy trucks were validated against experimental tests.The validated modeling methods were employed to simulate collisions between PSBCs and heavy trucks.The simulation results demonstrated that the engine and cargo caused two major peak impact forces during collision.Subsequently,the impact force,failure mode,displacement,and internal force of the PSBCs under heavy truck impacts were scrutinized.An extensive study was performed to assess the influence of the section size,truck weight,impact velocity,and number of precast segments on the impact responses.The truck weight was found to have a minor effect on the engine impact force.Damage was found to be localized at the bottom of the three segments,with the top remaining primarily undamaged.This parametric study demonstrated that larger cross-sections may be a preferred option to protect PSBCs against the impact of heavy trucks.

Seismic behavior of precast segmental column bridges under near-fault forward-directivity ground motions

Precast segmental column bridges exhibit various construction advantages in comparison to traditional monolithic column bridges.However,the lack of cognitions on seismic behaviors has seriously restricted their applications and developments.In this paper,comprehensive investigations are conducted to analyze the dynamic characteristics of precast segmental column bridges under near-fault,forward-directivity ground motions.First,the finite-element models of two comparable bridges with precast segmental columns and monolithic columns are constructed by using OpenSees software,and the nonlinearities of the bridges are considered.Next,three different earthquake loadings are meticulously set up to handle engineering problems,namely recorded near-and far-field ground motions,parameterized pulses,and pulse and residual components extracted from real records.Finally,based on the models and earthquake sets,extensive explorations are carried out.The results show that near-fault forward-directivity ground motions are more threatening than far-field ones;precast segmental column bridges may suffer more pounding impacts than monolithic bridges;the“narrow band”effect caused by near-fault,forward-directivity ground motions may occur in bridges with shorter periods than pulse periods;and pulse and residual components play different roles in seismic responses.

Investigation of effect of near-fault motions on substandard bridge structures

The objective of this study was to investigate the effects of near-fault ground motions on substandard bridge columns and piers. To accomplish these goals, several large scale reinforced concrete models were constructed and tested on a shake table using near- and far-field ground motion records. Because the input earthquakes for the test models had different characteristics, three different measures were used to evaluate the effect of the input earthquake. These measures are peak shake table acceleration, spectral acceleration at the fundamental period of the test specimens, and the specimen drift ratios. For each measure, force-displacement relationships, strains, curvatures, drift ratios, and visual damage were evaluated. Results showed that regardless of the measure of input or response, the near-fault record generally led to larger strains, curvatures, and drift ratios. Furthermore, residual displacements were small compared to those for columns meeting current seismic code requirements.

Seismic performance of precast hollow bridge piers with different construction details

Currently the design scheme ofprecast hollow concrete bridge piers will be adopted in bridge design in China, but there is no code including specific design details of precast segmental piers in high seismic risk area. For comparative study of seismic performance of the hollow bridge piers which had different design details, six specimens of hollow section bridge pier were designed and tested. The specimens consist of the monolithic cast-in-place concrete bridge pier, precast segmental prestressed pier with cast-in-place joint and precast segmental concrete bridge pier with dry joints. Results show that all specimens have good displacement capacity. The bridge pier with bonded prestressed strands exhibits better energy dissipation capacity and higher strength. The un-bonded prestressed strand bridge pier displays less residual plastic displacement and energy dissipation capacity. The bridge pier with both bonded prestressed strands at the edge of the section and un-bonded in the center of the section not only exhibits more ductility capacity and less residual plastic displacement, but also shows better energy dissipation capacity. Compared with experimental results of prestressed bridge columns, analytical result demonstrates the developed numerical analysis model would provide the reasonable and accurate results.