期刊文献+
共找到2,806篇文章
< 1 2 141 >
每页显示 20 50 100
Mechanical responses of anchoring structure under triaxial cyclic loading 被引量:2
1
作者 Peng Wang Nong Zhang +5 位作者 Qun Wei Xingliang Xu Guangzhen Cui Aoran Li Sen Yang Jiaguang Kan 《Journal of Rock Mechanics and Geotechnical Engineering》 SCIE CSCD 2024年第2期545-560,共16页
Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the inves... Dynamic load on anchoring structures(AS)within deep roadways can result in cumulative damage and failure.This study develops an experimental device designed to test AS under triaxial loads.The device enables the investigation of the mechanical response,failure mode,instability assessment criteria,and anchorage effect of AS subjected to combined cyclic dynamic-static triaxial stress paths.The results show that the peak bearing strength is positively correlated with the anchoring matrix strength,anchorage length,and edgewise compressive strength.The bearing capacity decreases significantly when the anchorage direction is severely inclined.The free face failure modes are typically transverse cracking,concave fracturing,V-shaped slipping and detachment,and spallation detachment.Besides,when the anchoring matrix strength and the anchorage length decrease while the edgewise compressive strength,loading rate,and anchorage inclination angle increase,the failure intensity rises.Instability is determined by a negative tangent modulus of the displacement-strength curve or the continued deformation increase against the general downward trend.Under cyclic loads,the driving force that breaks the rock mass along the normal vector and the rigidity of the AS are the two factors that determine roadway stability.Finally,a control measure for surrounding rock stability is proposed to reduce the internal driving force via a pressure relief method and improve the rigidity of the AS by full-length anchorage and grouting modification. 展开更多
关键词 Triaxial stress Dynamic-static combination load Cyclic loading Anchoring structure(AS) Cumulative damage
下载PDF
Optimization and Characterization of Combined Degumming Process of Typha angustata L. Stem Fibers
2
作者 Sana Rezig Foued Khoffi +2 位作者 Mounir Jaouadi Asma Eloudiani Slah Msahli 《Journal of Renewable Materials》 EI CAS 2024年第6期1071-1086,共16页
Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers.Researchers over the years have explored many plant fibers using different extraction processes to... Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers.Researchers over the years have explored many plant fibers using different extraction processes to study their physical,chemical,and mechanical properties.In this context,the present study relates to the extraction,characterization,and optimization of Typha angustata L.stem fibers.For this purpose,desirability functions and response surface methodology were applied to simultaneously optimize the diameter(D),linear density(LD);yield(Y),lignin fraction(L),and tenacity(T)of Typha stem fibers.Typha stems have been subjected to both alkali(NaOH)and enzymatic(pectinex ultra-SPL)treatments.Three levels of process variables including enzyme concentration(10,15,and 20 ml/L)and treatment duration(10,15,and 20 days)were used to design the experiments according to the factorial design.Experimental results were examined by analysis of variance and fitted to second order polynomial model using multiple regression analysis.The Derringer’s desirability function released that the values of process variables generating optimized diameter,linear density,yield,lignin ratio and tenacity are 20 ml/L and 20 days for concentration of pectinex ultra-SPL enzyme and treatment duration,respectively.Confirmation was performed and high degree of correlation was found between the experimental and statistical values.Moreover,the morphological structure has been investigated by the scanning electron microscope,showing a crenelated structure of ultimate fiber bundles of cellulose composing the Typha fiber.Compared to Typha stem non-treated fibers(TSNTF),Typha stem combined treated fibers(TSCTF),brings to improve mechanical properties.This change in mechanical properties is affected by modifying the fiber structure showing alpha cellulose of(66.86%)and lignin ratio of(10.83%)with a crystallinity index of(58.47%). 展开更多
关键词 Typha angustata L.stems fibers combined treatment optimization process desirability function chemical and physical properties morphological structure
下载PDF
Electronic Structure Investigation of 12442 Iron-Based Superconductors Based on Block-Layer Model
3
作者 Jianan Bian Xinyuan Jiang +1 位作者 Yuchen Zou Yiming Yu 《材料科学与工程(中英文B版)》 2024年第1期21-26,共6页
Superconducting transition temperature(Tc),as a crucial parameter,exploring its relationship with various macroscopic and microscopic factors helps to understand the mechanism of high-temperature superconductivity fro... Superconducting transition temperature(Tc),as a crucial parameter,exploring its relationship with various macroscopic and microscopic factors helps to understand the mechanism of high-temperature superconductivity from multiple perspectives,aiding in a multidimensional comprehension of high-temperature superconductivity mechanisms.Drawing inspiration from the block-layer structure models of cuprate superconductors,we computationally investigated the interlayer interaction energies in the 12442-type iron-based superconducting materials AkCa_(2)Fe_(4)As_(4)F_(2)(Ak=K,Rb,Cs)systems based on the block-layer model and explored their relationship with Tc.We observed that an increase in interlayer combinative energy leads to a decrease in Tc,while conversely,a decrease in interlayer combination energy results in an increase in Tc.Further,we found that the contribution of the Fe 3d band structure,especially the 3dz2 orbital,to charge transfer is significant. 展开更多
关键词 Block-layer structural mode iron-based superconductor combinative energy superconducting transition temperature
下载PDF
Effect of Ceramsite Structure on Microstructure of Interfacial Zone and Durability of Combined Aggregate Concrete 被引量:5
4
作者 孔丽娟 《Journal of Wuhan University of Technology(Materials Science)》 SCIE EI CAS 2009年第1期145-149,共5页
Structure characteristics of three kinds of ceramsite with different water absorption and the influence on microstructure of interfacial zone as well as performance of chloride permeabil-ity and frost resistance of co... Structure characteristics of three kinds of ceramsite with different water absorption and the influence on microstructure of interfacial zone as well as performance of chloride permeabil-ity and frost resistance of combined aggregate concrete were investigated. The results show that, dense shell and closed internal pore have sharp effects on lowering water absorption of ceramsite. However, the ceramsite with high water absorption has obvious effect on the densification of interfa-cial paste which would develop a structure with lower porosity, finer aperture and higher microhard-ness. Furthermore, the impermeability and frost-resistance of concrete can be improved due to the ef-fect of water absorption and releasing by ceramsite with higher water absorption. 展开更多
关键词 CERAMSITE combined aggregate concrete chloride permeability frost resistance pore structure MICROHARDNESS
下载PDF
Study on Wave Dissipation of the Structure Combined by Baffle and Submerged Breakwater 被引量:4
5
作者 JU Lie-hong zuo Qi-hua +1 位作者 TENG Ling WANG Xing-gang 《China Ocean Engineering》 SCIE EI CSCD 2017年第6期674-682,共9页
This paper proposes a structure combined by baffle and submerged breakwater (abbreviated to SCBSB in the following texts). Such a combined structure is conducive to the water exchange in the harbor, and has strong c... This paper proposes a structure combined by baffle and submerged breakwater (abbreviated to SCBSB in the following texts). Such a combined structure is conducive to the water exchange in the harbor, and has strong capability on wave dissipation. Our paper focuses on the discussion of two typical structures, i.e., the submerged baffle and rectangular breakwater combined with the upper baffle respectively, which are named as SCBSB 1 and SCBSB2 for short. The eigenfunction method corrected by experimental results is used to investigate the wave dissipation characteristics. It shows that the calculated results agree well with the experimental data and the minimum value of the wave transmission coefficient can be obtained when the distance between the front and rear structures is from 1/4 to 1/2 of the incident wave length. 展开更多
关键词 combined wave dissipation structure eigenfunction method physical model experiment transmissioncoefficient correction wave dissipation effect
下载PDF
Analysis of the sealing performance of combined sealing structure under deep-sea high pressure environment 被引量:2
6
作者 JIN Yong-ping YI Pan +1 位作者 PENG You-duo WAN Bu-yan 《Marine Science Bulletin》 CAS 2019年第2期36-56,共21页
For the requirement of safe and stable operation,the combined sealing structure was used for reciprocating motion in the deep sea high-pressure environment,and the effects of different seawater depths and shaft moveme... For the requirement of safe and stable operation,the combined sealing structure was used for reciprocating motion in the deep sea high-pressure environment,and the effects of different seawater depths and shaft movement speed on the sealing performance of the combined sealing structure were studied.The change rule of the sealing performance of the combined sealing structure of reciprocating motion under different working conditions is proved.The study shows that in the combined sealing structure of reciprocating movement,the Von Mises stress and the contact stress of the O-ring varies with the direction of the shaft movement.The Von Mises stress and contact stress of the O-ring,the Von Mises stress and the contact stress on each sealing lip of the slip ring gradually increase with the increasing of seawater depths.At the same time,the Von Mises stress of the O-ring which in the process of the shaft upward movement is greater than the shaft downward movement,making the shaft upward movement more likely to cause the O-ring relaxation and fatigue.The shaft movement speed has no significant influence on the Von Mises stress and contact stress of the O-ring.The research results provide theoretical guidance and technical support for the selection and optimization of the geometrical parameters of the combined sealing structure in the deep-sea high-pressure environment. 展开更多
关键词 deep sea high-pressure environment combined sealing structure performance analysis
下载PDF
(2+1)-Dimensional Combined Structures of Various Solitons with CompletelyNonelastic Interaction Properties 被引量:1
7
作者 ZHANGJie-Fang MENGJian-Ping 《Communications in Theoretical Physics》 SCIE CAS CSCD 2004年第5期655-664,共10页
Starting from the variable separation solution obtained by using the extended homogenous balance method,a new class of combined structures, such as multi-peakon and multi-dromion solution, multi-compacton and multidro... Starting from the variable separation solution obtained by using the extended homogenous balance method,a new class of combined structures, such as multi-peakon and multi-dromion solution, multi-compacton and multidromion solution, multi-peakon and multi-compacton solution, for the (2+1)-dimensional Nizhnik-Novikov-Veselov equation are found by selecting appropriate functions. These new structures exhibit novel interaction features. Their interaction behavior is very similar to the completely nonelastic collisions between two classical particles. 展开更多
关键词 combined structure dromion solitoff COMPACTON PEAKON
下载PDF
Research on seismic performance and design method of combined steel lead energy dissipation structure(Ⅰ) 被引量:1
8
作者 颜学渊 张永山 +2 位作者 王焕定 黄东阳 辛亚军 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2010年第3期376-382,共7页
A new combined steel lead damper (NCSLD) was presented. Construction and working mechanism of NCSLD were introduced,pseudo-static tests of the small size dampers which would be used in the subsequent shaking table tes... A new combined steel lead damper (NCSLD) was presented. Construction and working mechanism of NCSLD were introduced,pseudo-static tests of the small size dampers which would be used in the subsequent shaking table tests were carried out for the study of mechanical properties of NCSLD using electro-hydraulic servo press-shear machine. Processing technology of the damper was improved. Shaking table tests under two-dimensional excitation on structural aseismic control of a one-story structure model were carried out using the small size NCSLD; parameters of the structure and shaking table were also introduced. Results indicate that process improvement is beneficial to the implementation of working mechanism of the damper,NCSLD has full hysteresis loop which takes on bilinearity,NCSLD has obvious energy dissipation effect and it can control structural seismic response effectively. 展开更多
关键词 structural earthquake-resistance new combined steel lead damper (NCSLD) earthquake simulation shaking table test seismic response hysteresis loop
下载PDF
Deformation coordination analysis of CC-RCC combined dam structures under dynamic loads 被引量:1
9
作者 Bo-wen Shi Ming-chao Li +2 位作者 Ling-guang Song Meng-xi Zhang Yang Shen 《Water Science and Engineering》 EI CAS CSCD 2020年第2期162-170,共9页
A combined dam structure using different concrete materials offers many practical benefits.There are several real-world cases where largevolume heterogeneous concrete materials have been used together.From the enginee... A combined dam structure using different concrete materials offers many practical benefits.There are several real-world cases where largevolume heterogeneous concrete materials have been used together.From the engineering design standpoint,it is crucial to understand the deformation coordination characteristics and mechanical properties of large-volume heterogeneous concrete,which affect dam safety and stability.In this study,a large dam facility was selected for a case study,and various design schemes of the combined dam structure were developed by changing the configurations of material zoning and material types for a given dam shape.Elastoplastic analysis of the damfoundation-reservoir system for six schemes was carried out under dynamic conditions,in which the concrete damaged plasticity(CDP)model,the Lagrangian finite element formulation,and a surface-to-surface contact model were utilized.To evaluate the mechanical properties of zoning interfaces and coordination characteristics,the vertical distribution of the first principal stress at the longitudinal joint was used as the critical index of deformation coordination control,and the overall deformation and damage characteristics of the dam were also investigated.Through a comparative study of the design schemes,an optimal scheme of the combined dam structure was identified:large-volume roller-compacted concrete(RCC)is recommended for the dam body upstream of the longitudinal joint,and high-volume fly ash conventional concrete(CC)for the dam body downstream of the longitudinal joint.This study provides engineers with a reference basis for combined dam structure design. 展开更多
关键词 combined dam structure Deformation coordination CC-RCC Dynamic response Finite element simulation Concrete damaged plasticity(CDP)model
下载PDF
FLOW STRUCTURES AND FORCE CHARACTERISTICS FOR FLAT PLATE IN OSCILLATORY FLOWS WITH K_c NUMBER FROM 2 TO 40 AND IN COMBINED FLOWS
10
作者 凌国灿 刘国华 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 1992年第1期35-43,共9页
The evolution of wake structures and variation of the forces on a flat plate in harmonic oscillatory and in-line combined flows are obtained numerically by improved discrete vortex method. For the oscillatory oncoming... The evolution of wake structures and variation of the forces on a flat plate in harmonic oscillatory and in-line combined flows are obtained numerically by improved discrete vortex method. For the oscillatory oncoming flow cases, when K_c number varies from 2 to 40, the vortex pattern changes from a 'harmonic wave' shaped (in a range of small K_c numbers) to a slight inclined 'harmonic wave' shaped (in a range of moderate K_c numbers), then to inclined vortex clusters with an angle of 50 ° to the oncoming flow direction (at K_c = 20), at last, as K_c number becomes large, the vortex pattern is like a normal Karman vortex street. The well predicted drag and inertia force coefficients are obtained, which are more close to the results of Keulegan & Carpenter's experiment as compared with previous vortex simulation by other au- thors. The existence of minimum point of inertia force coefficient C_m near K_c = 20 is also well predicted and this phenomenon can be interpreted according to the vortex structure. For steady-oscillatory in-line combined flow cases, the vortex modes behave like a vortex street, exhibit a 'longitudinal wave' structure, and a vor- tex cluster shape corresponding to the ratios of U_m to U_0 which are of O (10^(-1)), O(1)and O (10), respectively. The effect on the prediction of forces on the flat plate from the disturbance component in a combined flow has been demon- strated qualitatively. In addition to this, the lock-in phenomenon of vortex shedding has been checked. 展开更多
关键词 flow structure force coefficients oscillatory flow combined flow that plate discrete vortex method
下载PDF
Analysis of static structural mechanics of vertical axis wind turbine with lift-drag combined starting structures
11
作者 QU Chunming FENG Fang +2 位作者 LI Yan BAI Yuedi ZHAO Bin 《排灌机械工程学报》 CSCD 北大核心 2021年第9期923-928,共6页
The finite element analysis was carried out for a composite vertical axis wind turbine with lift-drag combined starting structures to ensure the structure safety of a vertical axis wind turbine(VAWT).The static and mo... The finite element analysis was carried out for a composite vertical axis wind turbine with lift-drag combined starting structures to ensure the structure safety of a vertical axis wind turbine(VAWT).The static and modal analysis of rotor of a composite vertical axis wind turbine was conducted by using ANSYS software.The relevant contour sketch of stress and deformation was obtained.The analysis was made for static structural mechanics,modal analysis of rotor and the total deformation and vibration profile to evaluate the influence on the working capability of the rotor.The analysis results show that the various structure parameters lie in the safety range of structural mechanics in the relative standards.The analysis showing the design safe to operate the rotor of a vertical axis wind turbine.The methods used in this study can be used as a good reference for the structural mechanics′analysis of VAWTs. 展开更多
关键词 vertical axis wind turbine finite element analysis static structural mechanics lift-drag combined starting structure model analysis
下载PDF
THE TOPOLOGICAL OPTIMIZATION FOR TRUSS STRUCTURES WITH STRESS CONSTRAINTS BASED ON THE EXIST-NULL COMBINED MODEL 被引量:9
12
作者 隋允康 于新 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 1998年第4期363-370,共8页
A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be ob... A new exist-null combined model is proposed for the structural topology optimization. The model is applied to the topology optimization of the truss with stress constraints. Satisfactory computational result can be obtained with more rapid and more stable convergence as compared with the cross-sectional optimization. This work also shows that the presence of independent and continuous topological variable motivates the research of structural topology optimization. 展开更多
关键词 structural topology optimization independent and continuous topological variable smooth model exist-null combination TRUSS stress constraint
全文增补中
Transformation Matrix for Combined Loads Applied to Thin-Walled Structures
13
作者 Abdelraouf M. Sami Alsheikh David William Alan Rees 《World Journal of Mechanics》 2022年第6期65-78,共14页
This paper transforms combined loads, applied at an arbitrary point of a thin-walled open section beam, to the shear centre of the cross-section of the beam. Therein, a generalized transformation matrix for loads with... This paper transforms combined loads, applied at an arbitrary point of a thin-walled open section beam, to the shear centre of the cross-section of the beam. Therein, a generalized transformation matrix for loads with respect to the shear centre is derived, this accounting for the bimoments that develop due to the way the combined loads are applied. This and the authors’ earlier paper (World Journal of Mechanics 2021, 11, 205-236) provide a full solution to the theory of thin-walled, open-section structures bearing combined loading. The earlier work identified arbitrary loading with the section’s area properties that are necessary to axial and shear stress calculations within the structure’s thin walls. In the previous paper attention is paid to the relevant axes of loading and to the transformations of loading required between axes for stress calculations arising from tension/compression, bending, torsion and shear. The derivation of the general transformation matrix applies to all types of loadings including, axial tensile and compression forces, transverse shear, longitudinal bending. One application, representing all these load cases, is given of a simple channel cantilever with an eccentrically located end load. 展开更多
关键词 Thin-Walled structure Open Sections Transformation Matrix Load Transformation combined Load Transformation Shear Centre WARPING BIMOMENT Sectorial Area Properties
下载PDF
Protein Secondary Structure Prediction with Dynamic Self-Adaptation Combination Strategy Based on Entropy 被引量:1
14
作者 Yuehan Du Ruoyu Zhang +4 位作者 Xu Zhang Antai Ouyang Xiaodong Zhang Jinyong Cheng Wenpeng Lu 《Journal of Quantum Computing》 2019年第1期21-28,共8页
The algorithm based on combination learning usually is superior to a singleclassification algorithm on the task of protein secondary structure prediction. However,the assignment of the weight of the base classifier us... The algorithm based on combination learning usually is superior to a singleclassification algorithm on the task of protein secondary structure prediction. However,the assignment of the weight of the base classifier usually lacks decision-makingevidence. In this paper, we propose a protein secondary structure prediction method withdynamic self-adaptation combination strategy based on entropy, where the weights areassigned according to the entropy of posterior probabilities outputted by base classifiers.The higher entropy value means a lower weight for the base classifier. The final structureprediction is decided by the weighted combination of posterior probabilities. Extensiveexperiments on CB513 dataset demonstrates that the proposed method outperforms theexisting methods, which can effectively improve the prediction performance. 展开更多
关键词 Multi-classifier combination ENTROPY protein secondary structure prediction dynamic self-adaptation
下载PDF
Method for Calculating the Ultimate Strength of Pitting Corrosion Ship Structural Plates Under Combined Loads
15
作者 Lin Hua Fan Wh +1 位作者 Jinlei Mu Xiaolong Ma 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2018年第5期78-85,共8页
In order to solve the problem of calculating the ultimate strength of marine plate under pitting corrosion,the plate taking from marine with pitting corrosion was studied. Based on the data of pitting corrosion record... In order to solve the problem of calculating the ultimate strength of marine plate under pitting corrosion,the plate taking from marine with pitting corrosion was studied. Based on the data of pitting corrosion recorded,the concept of pitting corrosion characteristic element matrix was proposed to describe the distribution and the forms of pitting. Moreover,the model of sensitivity calculation was established to analyse the sensitivity of pitting corrosion characteristic elements for the ultimate bearing capacity of ship structural plate. A new approach was proposed to calculate the ultimate strength of pitting damaged ship structural plate under combined loads based on the factor of rigidity reduction. Simultaneously this new approach was proven to be validated by finite element simulation. Finally,formula of ultimate strength of pitting damaged ship hull plate was established by series of numerical calculations based on the approach,and the reliability of the formula was validated as well. 展开更多
关键词 SHIP structure PITTING DAMAGE ULTIMATE strength combined loads sensitivity analysis
下载PDF
Combination of structure tensor and tilt angle in the edge detection of potential field data
16
作者 LIN Song LI Lili SHI Jianan 《Global Geology》 2018年第4期252-259,共8页
Edge detection is a commonly requested task in the interpretation of potential field data. Different methods have different results for varied depths and shapes of geological bodies. In this paper,we propose using the... Edge detection is a commonly requested task in the interpretation of potential field data. Different methods have different results for varied depths and shapes of geological bodies. In this paper,we propose using the combination of structure tensor and tilt angle to detect the edges of the sources,which can display the edges of shallow and deep bodies simultaneously. Through tests on synthetic potential field data,it is obvious that the proposed edge detection methods can display the sources edges more clearly and precisely,compared with other commonly used methods. The application on real potential field data shows similar result,obtaining the edges of layers and faults clearly. In addition,another advantage of the new method is its insensitivity to noise. 展开更多
关键词 combinATION structure TENSOR TILT ANGLE EDGE DETECTION potential field data
下载PDF
The Application of Pile Foundation Bearing-Retaining Wall Combination Structure in a Mountainous Urban High Fill Project
17
作者 Hongmei Wang Xiaoguang Mao Qi Su 《Journal of World Architecture》 2022年第4期15-21,共7页
Pile foundation bearing-retaining wall combination structure is a new type of support structure developed in recent years.This article focuses on the characteristics,advantages,and application scope of the support str... Pile foundation bearing-retaining wall combination structure is a new type of support structure developed in recent years.This article focuses on the characteristics,advantages,and application scope of the support structure,while combining a variety of algorithms,according to different geological conditions and slope stability,as well as summarizes the pile foundation bearing-retaining wall combination structure force analysis and design methods,taking a high-fill road project in Chongqing as an example.The application of this support structure under special conditions,such as thicker soil layer,steeper sliding surface,weak foundation,and limited slope release conditions,is presented,which illustrates the technical advantages of this support structure and proving that it has several other advantages,including clear force mechanism as well as economic and reasonable structure,thus providing reference for similar projects. 展开更多
关键词 Pile foundation bearing-retaining wall combined support structure Design calculation method
下载PDF
Application of Tension Leg Platform Combined with Other Systemsin the Development of China Deepwater Oil Fields 被引量:2
18
作者 张大刚 《China Ocean Engineering》 SCIE EI 2006年第4期517-528,共12页
The development of deepwater oil fields has reached a new stage with the dramatic increase in water depth and the recent increasing demands of the economic development in the filed. The use of a Tension Leg Platform ... The development of deepwater oil fields has reached a new stage with the dramatic increase in water depth and the recent increasing demands of the economic development in the filed. The use of a Tension Leg Platform (TIP) combined with other systems, such as Floating Production Storage and Offloading (FPSO) system, Floating Production Unit (FPU) system, Tender Assisted Drilling (TAD) system, etc., has drawn the industry attention and increased significantly in the past few years. For the areas lacking of pipeline system, the use of TIP(s) combined with FPSO has been chosen to efficiently develop the deepwater fields. The TIP with a Tender Assisted Drilling system significantly reduces the payload of the platform and reduces the investment in the TIP system substantially. This opens the door for many new deepwater field developments to use the tension leg platform. The advantage of the TIP combined with a TAD system is more significant when several TIPs are used for the continuous development of the field. One of the applications for the TIP with a tender assisted drilling system can be in the development of an offshore marginal field. Owing to the increase of water depth, the conventional fixed platform model for the exploration of those fields becomes uneconomical. It also would be too expensive to use a large TIP structure for those marginal fields due to the large amount of initial investment. The TIP system with tender assisted drilling can be used to develop those fields economically. There are many marginal fields in China offshore, especially in shelf areas. The application of this field developing model, combined with the existing field developing experience in China, will open the door for many marginal field developments. This paper will review the application of the combined TIP system through some examples of completed/ongoing projects, and major technical issues encountered in those practices. The potential application of this technology in China deepwater development will be discussed in the end. 展开更多
关键词 tension leg platform combined system tender assisted drilling platform structure field development DEEPWATER
下载PDF
Design method of pile-slab structure roadbed of ballastless track on soil subgrade 被引量:3
19
作者 ZHAN Yong-xiang YAO Hai-lin JIANG Guan-lu 《Journal of Central South University》 SCIE EI CAS 2013年第7期2072-2082,共11页
Pile-slab structure roadbed is a new form of ballastless track for high speed railway. Due to lack of corresponding design code, based on the analysis of its structure characteristics and application requirements, it ... Pile-slab structure roadbed is a new form of ballastless track for high speed railway. Due to lack of corresponding design code, based on the analysis of its structure characteristics and application requirements, it is proposed to carry out load effect combination according to ultimate limit state and serviceability limit state, and the most unfavorable combination of each state is chosen to carry through design calculation for pile-slab structure. Space model of pile-slab structure can be simplified as a plane flame model, by using the orthogonal test method, and the design parameter of pile-slab structure is optimized. Moreover, based on the engineering background of Suining-Chongqing high-speed railway, the dynamic deformation characteristics of pile-slab structure roadbed are further researched by carrying on the indoor dynamic model test. The test results show that the settlement after construction of subgrade satisfies the requirement of settlement control to build ballastless track on soil subgrade for high-speed railway. Slab structure plays the role of arch shell as load is transmitted from slab to pile, and the vertical dynamic stress of subgrade soil is approximately of "K" form distribution with the depth. The distribution of pile stress is closely related to soil characteristics, which has an upset triangle shape where the large dynamic stress is at the top. Pile compared with soil shares most dynamic stress. Pile structure expands the depth of the dynamic response of subgrade has limited effect on dynamic response. These results can provide subgrade. and improves the stress of subgrade soil, and the speed of train scientific basis for pile-slab structure roadbed used on soil 展开更多
关键词 soil subgrade ballastless track pile-slab structure roadbed load combination dynamic model test
下载PDF
CFD studies on the separation performance of a new combined gas–solid separator used in TMSR-SF 被引量:1
20
作者 Mengdan Wu Ning Zhang +2 位作者 Jinguo Zhai Guo-Yan Zhou Shan-Tung Tu 《Nuclear Science and Techniques》 SCIE CAS CSCD 2019年第9期61-72,共12页
In order to comply with discharge standards, a gas–solid separator is used to remove solid particles from the thorium molten salt reactor-solid fuel (TMSR-SF) system. As a key component, it directly determines system... In order to comply with discharge standards, a gas–solid separator is used to remove solid particles from the thorium molten salt reactor-solid fuel (TMSR-SF) system. As a key component, it directly determines system energy efficiency. However, current gas–solid separators, based on activated carbon adsorption technology, result in high pressure drops and increased maintenance costs. In the present study, a new combined gas–solid separator was developed for the TMSR-SF. Based on a simplified computational fluid dynamics (CFD) model, the gas–solid twophase flow and the motion trajectory of solid particles were simulated for this new separator using commercial ANSYS 16.0 software. The flow and separation mechanism for this structure were also been discussed in terms of their velocity effects and pressure field distributions, and then the structure was optimized based on the influence of key structural parameters on pressure and separation efficiency. The results showed that the standard k–ε model could be achieved and accurately simulated the new combined separator. In this new combined gas–solid separator, coarse particles are separated in the first stage using rotating centrifugal motion, and then fine particles are filtered in the second stage, giving a separation efficiency of up to 96.11%. The optimum blade inclination angle and numbers were calculated to be 45° and four, respectively. It implicated that the combined separator could be of great significance in a wide variety of applications. 展开更多
关键词 combined SEPARATOR Gas–solid TWO-PHASE flow structure optimization CFD TMSR-SF
下载PDF
上一页 1 2 141 下一页 到第
使用帮助 返回顶部