Insights on advanced substrates for controllable fabrication of photoanodes toward efficient and stable photoelectrochemical water splitting

Conversion of solar energy into H_(2) by photoelectrochemical(PEC)water splitting is recognized as an ideal way to address the growing energy crisis and environmental issues.In a typical PEC cell,the construction of photoanodes is crucial to guarantee the high efficiency and stability of PEC reactions,which fundamentally rely on rationally designed semiconductors(as the active materials)and substrates(as the current collectors).In this review work,we start with a brief introduction of the roles of substrates in the PEC process.Then,we provide a systematic overview of representative strategies for the controlled fabrication of photoanodes on rationally designed substrates,including conductive glass,metal,sapphire,silicon,silicon carbide,and flexible substrates.Finally,some prospects concerning the challenges and research directions in this area are proposed.

11.2 W/mm power density AlGaN/GaN high electron-mobility transistors on a GaN substrate

In this letter,high power density AlGaN/GaN high electron-mobility transistors(HEMTs)on a freestanding GaN substrate are reported.An asymmetricΓ-shaped 500-nm gate with a field plate of 650 nm is introduced to improve microwave power performance.The breakdown voltage(BV)is increased to more than 200 V for the fabricated device with gate-to-source and gate-to-drain distances of 1.08 and 2.92μm.A record continuous-wave power density of 11.2 W/mm@10 GHz is realized with a drain bias of 70 V.The maximum oscillation frequency(f_(max))and unity current gain cut-off frequency(f_(t))of the AlGaN/GaN HEMTs exceed 30 and 20 GHz,respectively.The results demonstrate the potential of AlGaN/GaN HEMTs on freestanding GaN substrates for microwave power applications.

Influence of substrate effect on near-field radiative modulator based on biaxial hyperbolic materials

Relative rotation between the emitter and receiver could effectively modulate the near-field radiative heat transfer(NFRHT)in anisotropic media.Due to the strong in-plane anisotropy,natural hyperbolic materials can be used to construct near-field radiative modulators with excellent modulation effects.However,in practical applications,natural hyperbolic materials need to be deposited on the substrate,and the influence of substrate on modulation effect has not been studied yet.In this work,we investigate the influence of substrate effect on near-field radiative modulator based onα-MoO_(3).The results show that compared to the situation without a substrate,the presence of both lossless and lossy substrate will reduce the modulation contrast(MC)for different film thicknesses.When the real or imaginary component of the substrate permittivity increases,the mismatch of hyperbolic phonon polaritons(HPPs)weakens,resulting in a reduction in MC.By reducing the real and imaginary components of substrate permittivity,the MC can be significantly improved,reaching 4.64 forε_(s)=3 at t=10 nm.This work indicates that choosing a substrate with a smaller permittivity helps to achieve a better modulation effect,and provides guidance for the application of natural hyperbolic materials in the near-field radiative modulator.

Facile electrochemical surface-alloying and etching of Au wires to enable high-performance substrates for surface enhanced Raman scattering

Surface-enhanced Raman Spectroscopy(SERS)is a nondestructive technique for rapid detection of analytes even at the single-molecule level.However,highly sensitive and reliable SERS substrates are mostly fabricated with complex nanofabrication techniques,greatly restricting their practical applications.A convenient electrochemical method for transforming the surface of commercial gold wires/foils into silver-alloyed nanostructures is demonstrated in this report.Au substrates are treated with repetitive anodic and cathodic bias in an electrolyte of thiourea,in a one-pot one-step manner.X-rays absorption fine structure(XAFS)spectroscopy confirms that the AuAg alloy is induced at the surface.The unique AuAg alloyed surface nanostructures are particularly advantageous when served as SERS substrates,enabling a remarkably sensitive detection of Rhodamine B(a detection limit of 10^(-14)M,and uniform strong response throughout the substrates at 10^(-12)M).

Enhanced resonance frequency in Co2FeAl thin film with different thicknesses grown on flexible graphene substrate

The flexible materials exhibit more favorable properties than most rigid substrates in flexibility,weight saving,mechanical reliability,and excellent environmental toughness.Particularly,flexible graphene film with unique mechanical properties was extensively explored in high frequency devices.Herein,we report the characteristics of structure and magnetic properties at high frequency of Co2FeAl thin film with different thicknesses grown on flexible graphene substrate at room temperature.The exciting finding for the columnar structure of Co2FeAl thin film lays the foundation for excellent high frequency property of Co2FeAl/flexible graphene structure.In-plane magnetic anisotropy field varying with increasing thickness of Co2FeAl thin film can be obtained by measurement of ferromagnetic resonance,which can be ascribed to the enhancement of crystallinity and the increase of grain size.Meanwhile,the resonance frequency which can be achieved by the measurement of vector network analyzer with the microstrip method increases with increasing thickness of Co2FeAl thin film.Moreover,in our case with graphene film,the resonance magnetic field is quite stable though folded for twenty cycles,which demonstrates that good flexibility of graphene film and the stability of high frequency magnetic property of Co2FeAl thin film grown on flexible graphene substrate.These results are promising for the design of microwave devices and wireless communication equipment.

Recess-free enhancement-mode AlGaN/GaN RF HEMTs on Si substrate

Enhancement-mode(E-mode)GaN-on-Si radio-frequency(RF)high-electron-mobility transistors(HEMTs)were fabri-cated on an ultrathin-barrier(UTB)AlGaN(<6 nm)/GaN heterostructure featuring a naturally depleted 2-D electron gas(2DEG)channel.The fabricated E-mode HEMTs exhibit a relatively high threshold voltage(VTH)of+1.1 V with good uniformity.A maxi-mum current/power gain cut-off frequency(fT/fMAX)of 31.3/99.6 GHz with a power added efficiency(PAE)of 52.47%and an out-put power density(Pout)of 1.0 W/mm at 3.5 GHz were achieved on the fabricated E-mode HEMTs with 1-μm gate and Au-free ohmic contact.

Facile SERS screening of melamine in bovine milk with 2D printed AgNPs/glass fabric filter paper as the flexible substrate

Melamine is one of the most frequently detected adulterants in dairy products.The current study proposes a surface-enhanced Raman spectroscopy(SERS)-based analytical tool for fast and reliable screening of melamine in bovine milk.A hand-held Raman spectrometer was used in conjunction with a substrate composed of silver nanoparticles(AgNPs)that was 2D printed onto glass fiber(GF)filter paper.Under optimized conditions,a sensitive and fingerprint-like signal at 674 cm^(-1) was obtained.The AgNPs/GF substrate exhibited high sensitivity to melamine in milk down to 1.9498×10^(-5)mg/mL,which is well below the USA and EU safety limits(2.5×10^(-3)mg/mL).Remarkably,the proposed technology was also highly reproducible,showing spot-to-spot and block-to-block variations below 3.3%and 4.9%at 674 cm^(-1) in Raman intensity,respectively.The characteristic peak intensity and concentration of melamine showed an acceptable linear relationship(R^(2)=0.9909)within the range of 0.0001-1 mg/mL.Overall,the method established in this study can provide an efficient and effective method for the quantitative target screening and detection of melamine in dairy products.

Localized-states quantum confinement induced by roughness in CdMnTe/CdTe heterostructures grown on Si(111) substrates

This work shows that despite a lattice mismatch of almost 20%, CdMnTe/CdTe/CdMnTe heterostructures grown directly on Si(111) have surprisingly good optical emission properties. The investigated structures were grown by molecular beam epitaxy and characterized by scanning transmission electron microscopy, macro-and micro-photoluminescence. Low temperature macro-photoluminescence experiments indicate three emission bands which depend on the CdTe layer thickness and have different confinement characteristics. Temperature measurements reveal that the lower energy emission band (at 1.48 eV)is associated to defects and bound exciton states, while the main emission at 1.61 eV has a weak 2D character and the higher energy one at 1.71 eV has a well-defined (zero-dimensional, 0D) 0D nature. Micro-photoluminescence measurements show the existence of sharp and strongly circularly polarized (up to 40%) emission lines which can be related to the presence of Mn in the heterostructure. This result opens the possibility of producing photon sources with the typical spin control of the diluted magnetic semiconductors using the low-cost silicon technology.

Split Addition of Nitrogen-Rich Substrate at Thermophilic and Mesophilic Stages of Composting: Effect on Green House Gases Emission and Quality of Compost

Composting as a solution to the increasing generation of municipal solid waste (MSW), also contribute to GHGs emission when not controlled and could lack some basic nutrients, especially nitrogen. This study assessed the split-additions of nitrogen-rich substrate to composting materials and their effect on GHGs emissions as well as the quality of the composts. Nitrogen-rich substrates formulated from pig and goat manure were co-composted with MSW for a 12-weeks period by split adding at mesophilic (˚C) and thermophilic (>50˚C) stages in five different treatments. Representative samples from the compost were taken from each treatment for physicochemical, heavy metals and bacteriological analysis. In-situ CH4, CO2, N2O gas emissions were also analyzed weekly during composting. It was observed that all the treatments showed significant organic matter decomposition, reaching thermophilic temperatures in the first week of composting. The absence affects the suitable agronomic properties. All nitrogen-rich substrate applied at thermophilic stage (Treatment two) recorded the highest N, P and K concentrations of 1.34%, 0.97% and 2.45%, respectively with highest nitrogen retention. In terms of GHG emissions, CO2 was highest at the thermophilic stage when N-rich substrate was added in all treatment, while CH4 was highest in the mesophilic stage with N-rich substrate addition. N2O showed no specific trend in the treatments. Split addition of the N-rich substrate for co-composting of MSW produced compost which is stable, has less nutrient loss and low GHG emissions. Split addition of a nitrogen-rich substrate could be an option for increasing the fertilizer value of MSW compost.

Active tuning of anisotropic phonon polaritons in natural van der Waals crystals with negative permittivity substrates and its application in energy transport

Phonon polaritons(PhPs)exhibit directional in-plane propagation and ultralow losses in van der Waals(vdW)crystals,offering new possibilities for controlling the flow of light at the nanoscale.However,these PhPs,including their directional propagation,are inherently determined by the anisotropic crystal structure of the host materials.Although in-plane anisotropic PhPs can be manipulated by twisting engineering,such as twisting individual vdW slabs,dynamically adjusting their propagation presents a significant challenge.The limited application of the twisted bilayer structure in bare films further restricts its usage.In this study,we present a technique in which anisotropic PhPs supported by bare biaxial vdW slabs can be actively tuned by modifying their local dielectric environment.Excitingly,we predict that the iso-frequency contour of PhPs can be reoriented to enable propagation along forbidden directions when the crystal is placed on a substrate with a moderate negative permittivity.Besides,we systematically investigate the impact of polaritonic coupling on near-field radiative heat transfer(NFRHT)between heterostructures integrated with different substrates that have negative permittivity.Our main findings reveal that through the analysis of dispersion contour and photon transmission coefficient,the excitation and reorientation of the fundamental mode facilitate increased photon tunneling,thereby enhancing heat transfer between heterostructures.Conversely,the annihilation of the fundamental mode hinders heat transfer.Furthermore,we find the enhancement or suppression of radiative energy transport depends on the relative magnitude of the slab thickness and the vacuum gap width.Finally,the effect of negative permittivity substrates on NFRHT along the[001]crystalline direction ofα-MoO3 is considered.The spectral band where the excited fundamental mode resulting from the negative permittivity substrates is shifted to the first Reststrahlen Band(RB 1)ofα-MoO_(3) and is widened,resulting in more significant enhancement of heat flux from RB 1.We anticipate our results will motivate new direction for dynamical tunability of the PhPs in photonic devices.

Effect of substrate temperature and oxygen plasma treatment on the properties of magnetron-sputtered CdS for solar cell applications

Cadmium sulfide(CdS)is an n-type semiconductor with excellent electrical conductivity that is widely used as an electron transport material(ETM)in solar cells.At present,numerous methods for preparing CdS thin films have emerged,among which magnetron sputtering(MS)is one of the most commonly used vacuum techniques.For this type of technique,the substrate temperature is one of the key deposition parameters that affects the interfacial properties between the target film and substrate,determining the specific growth habits of the films.Herein,the effect of substrate temperature on the microstructure and electrical properties of magnetron-sputtered CdS(MS-CdS)films was studied and applied for the first time in hydrothermally deposited antimony selenosulfide(Sb_(2)(S,Se)_(3))solar cells.Adjusting the substrate temperature not only results in the design of the flat and dense film with enhanced crystallinity but also leads to the formation of an energy level arrangement with a Sb_(2)(S,Se)_(3)layer that is more favorable for electron transfer.In addition,we developed an oxygen plasma treatment for CdS,reducing the parasitic absorption of the device and resulting in an increase in the short-circuit current density of the solar cell.This study demonstrates the feasibility of MS-CdS in the fabrication of hydrothermal Sb_(2)(S,Se)_(3)solar cells and provides interface optimization strategies to improve device performance.

Advances in the structure design of substrate materials for zinc anode of aqueous zinc ion batteries

Aqueous zinc ion batteries(AZIBs) demonstrate tremendous competitiveness and application prospects because of their abundant resources,low cost, high safety, and environmental friendliness. Although the advanced electrochemical energy storage systems based on zinc ion batteries have been greatly developed, many severe problems associated with Zn anode impede its practical application, such as the dendrite formation,hydrogen evolution, corrosion and passivation phenomenon. To address these drawbacks, electrolytes, separators, zinc alloys, interfacial modification and structural design of Zn anode have been employed at present by scientists. Among them, the structural design for zinc anode is relatively mature, which is generally believed to enhance the electroactive surface area of zinc anode, reduce local current density, and promote the uniform distribution of zinc ions on the surface of anode. In order to explore new research directions, it is crucial to systematically summarize the structural design of anode materials. Herein, this review focuses on the challenges in Zn anode, modification strategies and the three-dimensional(3D) structure design of substrate materials for Zn anode including carbon substrate materials, metal substrate materials and other substrate materials. Finally, future directions and perspectives about the Zn anode are presented for developing high-performance AZIBs.

Phytochemical Contents and Antioxidant Properties of Ganoderma lucidum Polysaccharides in Relation to Growth Stage and Culture Substrate

[Objectives]To determine physicochemical characteristics and antioxidant activity of Ganoderma lucidum polysaccharides(GLP)in different growth stages and culture media.[Methods]Five polysaccharides(GLP1,GLP2,GLP3,GLPW and GLPB)were extracted and purified from the fruiting body of G.lucidum at three growth stages and culture substrates(wood culture and bag culture).The chemical components and antioxidant activity of the five polysaccharides were determined.[Results]GLP1 contained the highest content of neutral sugar(87.65%)and GLP3 had the highest uronic acid content.All the samples mainly comprised glucose,galactose,mannose,xylose and arabose with different ratios.Moreover,their antioxidant activities were investigated on the basis of DPPH radical,ABTS radical,SOD-like activity,and antihaemolytic activity.Results indicated in all three growth stages GLP2 had the greatest antioxidant properties.In addition,the antioxidant activity of GLPW was significantly higher than that of GLPB.[Conclusions]Overall,by comparison,G.lucidum in growth stage two may have potential health benefits,and wood culture may be a superior choice of artificial cultivation due to their abundance of active polysaccharides.

Effects of substrate on burrowing behavior,feeding physiology,and energy budget of undulated surf clam Paphia undulata

Substrate is an important abiotic factor for burrowing shellfish,as it not only provides them with shelter,but also impose significant effect on their physiological metabolism.However,the physiological responses of burrowing clams within various substrates get less attention due to difficulty in carrying out physiological tests in buried conditions.Consequently,this study investigated the burrowing behavior,feeding physiology and energy budget of Paphia undulata,which is an important aquaculture bivalve species in south China.The clams were exposed to mud and sand substrates with variable physical properties in the laboratory,to determine the suitable substrate conditions for this species.The results showed that the percentage of burrowing clams,digging index,burrowing time,burrowing depth and scope for growth(SFG)were higher in mud substrates with≥40%water content.Likewise,burrowing percentage,digging index,and burrowing depths were higher in substrates with≤40%sand content.Moreover,the burrowing depth had significant effect on the feeding physiology and SFG of P.undulata as clams burrowed at 6.3±1.8 cm had higher clearance rates and SFG as compared to other buried depths.This study further revealed that low water content in the sediment inhibited physiological performances of P.undulata by impairing feeding or absorption,hence reducing the SFG.In conclusion,mud substrate with≥40%water content or with≤40%sand content is suitable for proper burrowing and growth of P.undulata.Our findings therefore provide fundamental knowledge that will be applicable in the improvement of bottom aquaculture and conservation of P.undulata.

Microbiota of a seepage face at the mouth of a subterranean estuary:diversity,distribution and substrate dependence

Subterranean estuaries,i.e.,the mixing zone between terrestrial groundwater and recirculated seawater,host a wide range of microbiota.Here,field campaigns were conducted at the mouth of the subterranean estuary at the Sanggou Bay(Shandong Province,China)over four consecutive seasons at a seepage face(0−20 cm depth).The diversity of benthic microbiome was characterized via 16S rRNA gene sequencing and metagenomics,combined with physic-chemical parameters,e.g.,organic carbon,total nitrogen and sulfate contents in sediments.During spring,the dominant species were assigned to the phylum Proteobacteria.Important opportunistic species was assigned to Acidobacteria,Actinobacteria and Bacteroidetes.The key components were identified to be species of the genera Pseudoalteromonas,Colwellia and Sphingobium,indicating the involvement of sediment microbiota in the degradation of sedimentary organic carbon,particularly that of pelagic origin,e.g.,phytoplankton detritus and bivalve pseudo-feces.During spring,the microbial community was statistically similar along the depth profiles and among the three sampled stations.Similar spatial distributions were obtained in the remaining seasons.By contrast,the dominant species assemblages varied significantly among seasons,with key genera being Thioprofundum and Nitrosopumilus during summer and autumn and Thioprofundum and Ilumatobacter during winter.Network analysis revealed a seasonal shift in benthic nitrogen and sulfur metabolism associated with these variations in microbial community composition.Overall,our findings suggested that macro elements derived from pelagic inputs,particularly detrital phytoplankton,shaped the microbial community compositions at the seepage face,resulting in significant seasonal variations,while the influence of terrestrial materials transported by groundwater on the sediment microbiota at the seepage face found to be minor.

Effect of Two Substrate Types on Feeding Efficiency by Juvenile Chinese Sturgeon Acipenser sinensis on Barcheek Goby Rhinogobius giurinus

We conducted experiments in an artificial stream tank with wild juvenile Chinese sturgeon Acipenser sinensis captured in the Yangtze Estuary to test the null hypothesis that their feeding efficiency on Barcheek goby Rhinogobius giurinus was not affected by sand vs. smooth glass substrate. Gobies are among the most common prey eaten by wild juvenile A. sinensis in the estuary. Test results found neither substrate type significantly affected feeding efficiency by juveniles. Previous research found a strong innate habitat preference of A. sinensis for sand substrate. The present results indicate that the preference for sand is not related to efficiently capturing R. giurinus on sand, but is an adaptation predisposing juvenile A. sinensis to seek sandy substrate where R. giurinus and other benthic forage are the most abundant in the Yangtze Estuary.

Substrate,Hormone,Winnowing,and Stratification Influence the Seed Germination of Ilex asprella(Hook.et Arn.)Champ.ex Benth

Ilex asprella(Hook.et Arn.)Champ.ex Benth is one of the most important traditional Chinese medicines in southern China.The seeds of Ilex asprella usually have extremely low germination due to their dormancy characteristics,which severely impacts the efficiency of seedling raising and increases labor costs.In this study,to improve the seed germination of I.asprella,the effects of germination substrate,hormone,winnowing,and stratification treatments on the seed germination of I.asprella were investigated.The results of the germination matrix showed that the highest germination percentage of 45.2%was achieved under the 20℃/10℃day/night temperature and vermiculite germination medium conditions.The results of hormone treatments revealed that 100–400 mg/L of gibberellin(GA)and 50–100 mg/L of salicylic acid(SA)were found to be effective in releasing the dormancy of I.asprella seeds.Moreover,winnowing could effectively eliminate unsaturated seeds and impurities,thus improving the seed germination of I.asprella.Furthermore,warm temperature(15℃)stratification could expand the temperature range of I.asprella’s seed germination,which was beneficial for seed germination of I.asprella and for seed nursery at room temperature in production practice.The present study obtained a method to break dormancy and increase seed germination in I.asprella,thereby forming a groundwork for improving the efficiency of large-scale planting of I.asprella.

Evaluation of Different Substrates Compositions for Acclimatization of Tissue Culture Taro Plantlets in a Propagator

Taro is cultivated in most Regions of Cameroon and it is affected by taro leaf blight disease since 2010 which has decreased its production. Lack of disease-free planting materials has been a main problem to farmers. This study was carried out at International Institute of Tropical Agriculture (IITA) Yaounde and Institute of Agricultural Research for Development (IRAD) Bambui to assess different substrates for acclimatization of tissue culture taro plantlets in apropagator. No information is available on acclimatization of Cameroonian taro plantlets in different substrates. Taro plantlets from tissue culture were acclimatised in a propagator for six weeks under different substrates, the first substrate consisted of sterile three parts of soil and one part of river sand mixed together (3:1), the second substrate consisted of sterile two parts of soil and two parts of river sand mixed together (2:2), the third substrate consisted of sterile two parts of soil, one part of rice husk and one part of river sand mixed together (2:1:1) and the fourth substrate consisted of sterile one part of soil and three parts of river sand mixed together (1:3). After acclimatisation of the different taroplantlets (Dark green petiole with small leaves (L1), Red petiole with small leaves (L2), Light green petiole with large leaves (L3) and Light green petiole with small leaves (L4) in these four substrates, it was observed that the best growth rate of plant was recorded on substrate sand + soil (1:3). The other substrates showed moderate growth of plants. Substrate sand + soil (1:3) can be recommended for acclimatization of Cameroonian taro plantlets.

Structure of Cu-Phthalocyanine Vacuum Deposited on Inclined Glass Substrates

Cu-phthalocyanine is widely studied as a hole-transport layer in organic electronic devices. Since Cu-phthalocyanine is a molecular solid, the crystal structure depends on a circumstance to a great extent. Vacuum deposited layers were known to consist of two consecutive layers. In this article, Cu-phthalocyanine was deposited on the glass substrate inclined at several angles. The thickness of the first layer was found to be dependent on the substrate angle.

Performance of Two Food Substrates in the Mass Rearing of Bactrocera dorsalis Hendel (Diptera: Tephritidae)

The fruit fly Bactrocera dorsalis Hendel is a major constraint to mango production in Burkina Faso. The objective of this study was to evaluate the performance of two types of food substrates in optimizing the mass rearing of B. dorsalis larvae. For this purpose, 200 eggs of B. dorsalis were divided into four batches of 50 eggs and incubated in Petri dishes containing the different food substrates (Diet 1 and Diet 2). This method was used to evaluate the rate and duration of egg hatching, as well as the development time of the different larval stages. In addition, 1200 pupae divided into four batches of 300 pupae, contained in PVC tubes, were placed inside the rearing cages to monitor the emergence of B. dorsalis. Ten pairs of B. dorsalis were placed in rearing cages and fed with Enzymatic Yeast Hydrolysate and sugar to evaluate the fecundity of female flies and the survival of both sexes. The developmental cycle length in Diet 1 and Diet 2 was 23.03 days and 23.24 days, respectively. Fecundity duration ranged from 57.75 ± 2.29 to 109.81 ± 3.81 days for females from Diet 1 and Diet 2, respectively. The pupal hatching rate varied significantly (P B. dorsalis, but the spawning index was 4 times higher with Diet 1. Most of the components of Diet 1 are available on the local market and are cheaper. Thus, we recommend the use of Diet 1 for B. dorsalis larvae mass rearing.