A model for predicting bubble rise velocity in a pulsed gas solid fluidized bed

Bed stability, and especially the bed density distribution, is affected by the behavior of bubbles in a gas solid fluidized bed. Bubble rise velocity in a pulsed gas-solid fluidized bed was studied using photographic and computational fluid dynamics methods. The variation in bubble rise velocity was investigated as a function of the periodic pulsed air flow. A predictive model of bubble rise velocity was derived: ub=ψ(Ut+Up-Umf)+kp(gdb)(1/2). The software of Origin was used to fit the empirical coefficients to give ψ = 0.4807 and kp = 0.1305. Experimental verification of the simulations shows that the regular change in bubble rise velocity is accurately described by the model. The correlation coefficient was 0.9905 for the simulations and 0.9706 for the experiments.

Numerical investigation of gas bubble behavior in tapered fluidized beds

In this article, the behavior of gas bubbles in tapered fluidized beds is investigated with the use of a two- fluid model incorporating kinetic theory of granular flow. The effects of various parameters such as apex angle, particle size, and particle density on the size distribution and the rise velocity of gas bubbles were examined. In addition, the simulation results for the bubble fraction and axial velocity of gas bubbles were compared with experimental data reported in the literature and good agreement was observed. As the apex angle was increased, the fraction of gas bubbles with large sizes increased and the fraction of bubbles with small sizes decreased. As the particle size increased, the fraction of gas bubbles with large diameters decreased; however, the fraction of bubbles with medium diameters increased. The obtained results clearly indicate that an increased solid density increased the bubble rise velocity up to a specified height and reduced the velocity at larger heights, in tapered fluidized beds.

A novel dual-material probe for in situ measurement of particle charge densities in gas-solid fluidized beds

Particle charge density is vitally important for monitoring electrostatic charges and understanding particle charging behavior in fluidized beds. In this paper, a dual-material probe was tested in a gas-solid fluidized bed for measuring the charge density of fluidized particles. The experiments were conducted in a two-dimensional fluidized bed with both single bubble injection and freely bubbling, at various particle charge densities and superficial gas velocities. Uniformly sized glass beads were used to eliminate complicating factors at this early stage of probe development. Peak currents, extracted from dynamic signals, were decoupled to determine charge densities of bed particles, which were found to be qualitatively and quantitatively consistent with charge densities directly measured by Faraday cup from the freely bubbling fluidized bed. The current signals were also decoupled to estimate bubble rise velocities, which were found to be in reasonable agreement with those obtained directly by analyzing video images.