Performance-based seismic design of nonstructural building components:The next frontier of earthquake engineering

With the development and implementation of performance-based earthquake engineering,harmonization of performance levels between structural and nonstructural components becomes vital. Even if the structural components of a building achieve a continuous or immediate occupancy performance level after a seismic event,failure of architectural,mechanical or electrical components can lower the performance level of the entire building system. This reduction in performance caused by the vulnerability of nonstructural components has been observed during recent earthquakes worldwide. Moreover,nonstructural damage has limited the functionality of critical facilities,such as hospitals,following major seismic events. The investment in nonstructural components and building contents is far greater than that of structural components and framing. Therefore,it is not surprising that in many past earthquakes,losses from damage to nonstructural components have exceeded losses from structural damage. Furthermore,the failure of nonstructural components can become a safety hazard or can hamper the safe movement of occupants evacuating buildings,or of rescue workers entering buildings. In comparison to structural components and systems,there is relatively limited information on the seismic design of nonstructural components. Basic research work in this area has been sparse,and the available codes and guidelines are usually,for the most part,based on past experiences,engineering judgment and intuition,rather than on objective experimental and analytical results. Often,design engineers are forced to start almost from square one after each earthquake event: to observe what went wrong and to try to prevent repetitions. This is a consequence of the empirical nature of current seismic regulations and guidelines for nonstructural components. This review paper summarizes current knowledge on the seismic design and analysis of nonstructural building components,identifying major knowledge gaps that will need to be filled by future research. Furthermore,considering recent trends in earthquake engineering,the paper explores how performance-based seismic design might be conceived for nonstructural components,drawing on recent developments made in the field of seismic design and hinting at the specific considerations required for nonstructural components.

Numerical simulation study on the hygrothermal performance of building exterior walls under dynamic wind-driven rain condition

Wind-driven rain(WDR)has a significant influence on the hygrothermal performance,durability,and energy consumption of building components.The calculation of WDR loads using semi-empirical models has been incorporated into the boundary conditions of coupled heat and moisture transfer models.However,prior research often relied on fixed WDR absorption ratio,which fail to accurately capture the water absorption characteristics of porous building materials under rainfall scenarios.Therefore,this study aims to investigate the coupled heat and moisture transfer of exterior walls under dynamic WDR boundary conditions,utilizing an empirically obtained WDR absorption ratio model based on field measurements.The developed coupled heat and moisture transfer model is validated against the HAMSTAD project.The findings reveal that the total WDR flux calculated with the dynamic WDR boundary is lower than that obtained with the fixed WDR boundary,with greater disparities observed in orientations experiencing higher WDR loads.The variations in moisture flow significantly impact the surface temperature and relative humidity of the walls,influencing the calculation of cooling and heating loads by different models.Compared to the transient heat transfer model,the coupled heat and moisture transfer model incorporating dynamic WDR boundary exhibits maximum increases of 17.6%and 16.2%in cooling and heating loads,respectively.The dynamic WDR boundary conditions provide more precise numerical values for surface moisture flux,offering valuable insights for the thermal design of building enclosures and load calculations for HVAC systems.

A study on the construction of interior architecture in Hankou

In this article, we set out from the library practical application, combined with the design of the built environment of space, lighting, color and other basic elements, build a library building to explore the internal environment. Application by Building Environment and Energy Engineering Practice teaching profession as well as social needs of research, combined with the professional status of teaching practice, Jiangsu University, discusses the necessity to build a new practice teaching system. In the student-oriented, systematic principles and openness from the three aspects of the practice of teaching objectives, practical teaching, practice teaching management and examination and evaluation systems of practical teaching system reform, to make the practice of teaching students to become ability , the real meaning of the ability to solve practical problems and innovative spirit are re？ ected, for training for the development needs of the times by the employers and quali＇ ed personnel create the conditions. Entering the new century, sustainable development has become a more serious topic in the world, in order to more effectively control and use of our environmental resources, many countries have formulated relevant building environmental assessment system.

A probabilistic-based method to evaluate hygrothermal performance of an internally insulated brick wall

Uncertainty exists in many aspects of building simulation.A deterministic hygrothermal analysis may not sufficiently give a reliable guidance if a number of input variables are subject to uncertainty.In this paper,a probabilistic-based method was developed to evaluate the hygrothermal performance of building components.The approach accounts for the uncertainties from model inputs and propagates them to the outputs through the simulation model,thus it provides a likelihood of performance risk.Latin hypercube sampling technique,incorporated with correlation structure among the inputs,was applied to generate the random samples that follows the intrinsic relations.The performance of an internally insulated masonry wall was evaluated by applying the proposed approach against different criteria.Thermal performance,condensation and mould growth potential of the renovated wall can overall satisfy the requirements stipulated in multifold standards.The most influential inputs were identified by the standardized regression sensitivity analysis and partial correlation technique.Both methods deliver the same key parameters for the single and time-dependent output variables in the case study.The probabilistic method can provide a comprehensive risk analysis and support the decision-maker and engineer in the design and optimization of building components.