Comparative Study of Two Materials Combining a Standard Building Material with a PCM

Phase change materials(PCMs)have the ability to store thermal energy and make it available at a later stage to keep indoor temperature within a specific range and achieve better thermal comfort in buildings.This study focuses on the performances of materials obtained by combining a standard building material with a PCM.In particular,two different materials mixed with the same PCM are considered under the same climatic conditions.The related thermal behavior is assessed in the framework of numerical simulations conducted with ANSYS Fluent assuming parameters representative of a city located in Europe.The results show that the addition of PCM to concrete and bricks can improve the thermal inertia of the resulting material.

Summary of Research on Use of Sediment in Building Materials

Based on the recent research at home and abroad,this paper summarizes the preparation of cement clinker,baking-free brick,subgrade filler and ceramsite from sediment,and puts forward relevant suggestions and prospects for the future research direction of sediment.

Thermomechanical and Hydrous Effect of Heavy Fuel Oil in a Building Material Based on Silty Clayey Soil

This study focuses on the use of heavy fuel oil in construction in Burkina Faso.Mixed with silty and/or clay soil,it is used as a coating to reinforce the walls of raw soil constructions which are very sensitive to water.The interest of this paper is to shed light on the thermomechanical and above all water effects of heavy fuel oil on a sample of silty clayey soil.To achieve this,we used heavy fuel oil added in different proportions to silty clayey soil,to make sample of bricks on which tests were carried out.At the end of the experimental tests carried out on materials made(bricks)with our soil sample,it appears that heavy fuel oil moderately reduces the mechanical resistance of bricks and slightly increases thermal diffusion through them.On the contrary,we note a very good water resistance of the bricks thanks to the heavy fuel oil,in particular their water absorption by capillarity.This confirms that the mixture of heavy fuel oil and a silty-clayey soil used as a coating makes it possible to prevent the infiltration of water into the walls of raw soil constructions.However,its use as a construction material does not guarantee very good mechanical resistance,and slightly increases thermal diffusion.

A Brief Analysis of Energy Conservation Ways by Building Materials for Ecological Architecture

The development of society and economy in China is bringing growth to all industries. In particular, the development of China’s building industry has attracted much attention. Building materials are an important part of and widely used in the building industry. Energy conservation by building materials has become an inevitable way of sustainable development. Centering on the building industry, this paper mainly discusses in detail the energy conservation ways by ecological architecture and building materials.

Industrial TiO2 based nacreous pigments as functional building materials:Photocatalytic removal of NO

In this paper,the photocatalytic activity of industrial titanium dioxide(TiO2)based nacreous pigments was researched as functional building materials for photocatalytic NO remove.Three industrial TiO2 based nacreous pigments were selected to estimate the photocatalytic activity for NO remove.This study is a good proof that pearlescent pigments can eliminate NO,and its performance is positively correlated with its titanium dioxide content.And this research will widen the application of nacreous pigments in functional building materials,and provide a new way to eliminate in door nitric oxide pollution.

Exploration on the Recycling of Waste Building Materials in Comprehensive Land Consolidation from the Perspective of Ecological Civilization

The necessity and difficulties of waste building material utilization in comprehensive land consolidation are put forward by analyzing the source,quantity and harm of waste building materials.Combined with the practice of Shanghai,the mechanism and pattern of waste building materials recycling are explored,in order to provide the reference for recycling of waste building materials and efficient promotion of land consolidation.

Modeling Water Adsorption and Retention of Building Materials From Pore Size Distribution

Water adsorption and capillarity are key phenomena involved during heat and moisture transfer in porous building materials.They account for interaction between solid matrix,liquid water and moist air.They are considered through Water Vapor Adsorption Isotherm(WVAI)and Retention Curve(RC)functions which are constitutive laws characterizing water activity within a porous medium.The objective of this paper is to present a water vapor adsorption and retention models built from multimodal Pore Size Distribution Function(PSDF)and to see how its parameters modify moisture storage for hygroscopic and near saturation ranges.The microstructure of the porous medium is represented statistically by a bundle of tortuous parallel pores through its PSDF.Firstly,the influence of contact angle and temperature on storage properties were investigated.Secondly,a parametric study was performed to see the influence of the PSDF shape on storage properties.Three cases were studied considering the number of modalities,the weight of each modality and the dispersion around mean radius.Finally,as a validation,the proposed model for WVAI were compared to existing model from literature showing a good agreement.This study showed that the proposed models are capable to reproduce various shapes of storage functions.It also highlighted the link between microstructure and adsorption-retention phenomena.

China's Building Materials Industry

China’s building materials industry experienced great development in 1993 with rapid increases in production and record output and profits. The industry produced 360 million tons of cement, 96.163 million cases of plate glass, 20.4 million pieces of sanitation ceramics and 173 million square metres of construction ceramics, showing rises of 12.89, 12.83, 123.8 and 127 percent respectively over the previous year. The output of cement and

Beixin Building Materials (Group) Corporation

Beixin Building Materials (Group) Corporation, Ltd, formerly known as Beijing New Type Building Material General Factory, was founded in 1979. It is the largest new type building materials production base in China invested by the state, one of the national 100 well known enterprises and one of the na-

Direct-bonded Magnesite-Chrome Bricks for Kilns and Furnaces of Building Materials Industry

JC 497-92 (96)1 Contents and Applied ScopeThis standard specifies the classification, shapes and dimensions, technical requirements, test methods, inspection rules, marking, packing, transportation, storage and quality certificate of direct-bonded magnesite-chrome bricks for building materials industry. This standard is applicable to the direct-bonded magnesite-chrome bricks for cement kiln, glass melting tank and other industrial furnaces.2 Normative ReferencesGB 2997: Test method for the apparent porosity, water absorption, bulk density and true porosity of dense shaped refractory productsGB 5070: Chemical analysis method for magnesite-Chrome refractoriesGB 5072: Test method for cold crushing strength of dense shaped refractory productsGB 5989: Test method for refractoriness under load of dense shaped refractory products (Differential, with rising temperature)GB 7320: Test method for thermal expansion of refractory productsGB 7321: Sample preparation for testing of dense shaped refractory productsGB 10324: Type definition of refractory productsGB 10325: Piling, sampling, acceptance, storage and transportation of refractory

Beijing Building Materials I/E Corporatio

Founded in November 1988, the Beijing Building Materials Import and Export Corporation is a foreign trade Corporation integrating trade with industry and technology. Since its founding five years ago, its import and export volume has witnessed an average increase of 26 percent a year. The corporation deals

The Vascular Vegetation Populating the Flora in Building Materials of Historic Monuments Cities of the West Central Region of Morocco

In the concern of the preservation of the main historic monuments of the cities of Rabat and Sale (Morocco), a botanical study was conducted in 2009. The prospecting of these monuments allowed raising an inventory of the flora populating their building materials, and it has proved that this flora is rich and diversified. Indeed, it consists of 171 adventitious species distributed in 46 botanical families. The most represented families are Asteraceae, Poaceae, Fabaceae, Caryophyllaceae, Geraniaceae, Brassicaceae and Lamiaceae. They supply, to them only 49.7% of the specific size. The annual therophytes and the dicotyledon are dominant with respectively 66.7% and 84.7% of the specific size. Nevertheless, the presence of more than 20 species of trees and perennials constitutes a serious danger for bulwarks walls, especially by the phenomenon of fissuring by the action of the huge roots of these vegetables. These vegetables fitting into are placed on joints or cracks fissures have a chemical action on stones by acids that they release, and also a mechanical action by the growth of roots inside cracks fissures. They remain one of these are one of the important biological factors of the degradation of historic monuments. It is to note that the bulwarks walls of the site of Chella (Roman ruins) present more floral diversity than the other canvassed monuments (91 species) that are 53% of the total size.

The Curriculum Reform Strategy of Building Materials in Higher Vocational Colleges Under the Background of"Three Educations"Reform

With the deepening of the"three educations"reform,it has been emphasized that higher vocational colleges should strengthen the improvement of talent training strategies,improve the school-running quality,and explore from three aspects(teachers,teaching materials,and teaching methods)to improve the teaching efficiency and quality.Taking the teaching contents of Building Materials in higher vocational colleges as the research idea,this paper analyzes the current situation of the curriculum reform under the background of"three educations"reform and explores the corresponding reform strategies.

Training Strategies of Practical Ability of Building Materials Professionals in Higher Vocational Colleges Under the Guidance of“Three Education Reform”Concept

The main purpose of the implementation of the three-education reform concept is to improve the teaching quality and talent training level of higher vocational colleges.Through the reform,one can promote the optimization of teaching methods,provide more space for student’s self-development,and improve the quality of talent training.Building materials in higher vocational colleges are a high requirement for practical ability,which emphasizes the cultivation of students’practical ability.Under the three-education reform concept,the traditional teaching mode should be replaced to provide more practical opportunities for students,in return give more attention to the development of students’practical ability.This paper mainly explores the current situation and training strategies in building material professionals in higher vocational colleges under the reform of the three education systems for a reference.

Experimental Assessment of the Effects of Building Materials on Wi-Fi Signal 2.4 GHz and 5 GHz

We are all witnesses to the widespread use of wireless LANs (WLAN) and their easy implementation in indoor environments. Wi-Fi is the most popular technology for the WLAN. However, interference caused by building materials is a common, yet often overlooked, contributor to poor Wi-Fi performance. This interference occurs due to the nature of radio wave propagation and the characteristics of the wireless communication system. Therefore, during the implementation of these networks, one must consider the quasi-static nature of the Wi-Fi signal and its dependence on the influence of various building materials on the propagation of these waves. This paper presents the effects of building materials and structures on indoor environments for Wi-Fi 2.4 GHz and 5 GHz. To establish the interdependencies between factors influencing electric field levels, measurements were conducted in an experimental Wi-Fi network at different distances from the access point (AP). The results obtained show that the electric field strength of the Wi-Fi signal decreases depending on the distance, the building materials, and the transmitted frequency. Concrete material had the most significant impact on the strength of the electric field in Wi-Fi, while glass had a relatively minor effect on reducing it. Wi-Fi operates within the radio frequency spectrum, typically utilizing frequencies in the 2.4 GHz and 5 GHz bands. Additionally, measurements revealed that Wi-Fi signal penetration is more pronounced at lower frequencies (2.4 GHz) as opposed to the Wi-Fi signal 5 GHz. The findings can be used to address the impact of building materials and structures on indoor radio wave propagation, ultimately ensuring seamless Wi-Fi signal coverage within buildings.