Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size ...Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.展开更多
In this paper the hit force of firing bullet on bulletproof helmet has been computed and the test device has been described. The device is divided into two parts: 1) The bullet, helmet and mould are in one system, u...In this paper the hit force of firing bullet on bulletproof helmet has been computed and the test device has been described. The device is divided into two parts: 1) The bullet, helmet and mould are in one system, using moment theorem to calculate the hit force; 2) The mould, sensor and support pole are in one system, using the method in reference [1] that measures the dynamic strain and displacement of simulate target of bulletproof clothes. We compute the transfigure energy and momentum energy when hitting the mould, the work done by the sensor and the expend energy of support pole. We get the hit force of helmet using energy balance principle. The result is according with the test and has been used to design the GGK93T bulletproof helmet and other serial products.展开更多
In modern physics and fabrication technology,simulation of projectile and target collision is vital to improve design in some critical applications,like;bulletproofing and medical applications.Graphene,the most promin...In modern physics and fabrication technology,simulation of projectile and target collision is vital to improve design in some critical applications,like;bulletproofing and medical applications.Graphene,the most prominent member of two dimensional materials presents ultrahigh tensile strength and stiffness.Moreover,polydimethylsiloxane(PDMS)is one of the most important elastomeric materials with a high extensive application area,ranging from medical,fabric,and interface material.In this work we considered graphene/PDMS structures to explore the bullet resistance of resulting nanocomposites.To this aim,extensive molecular dynamic simulations were carried out to identify the penetration of bullet through the graphene and PDMS composite structures.In this paper,we simulate the impact of a diamond bullet with different velocities on the composites made of single-or bi-layer graphene placed in different positions of PDMS polymers.The underlying mechanism concerning how the PDMS improves the resistance of graphene against impact loading is discussed.We discuss that with the same content of graphene,placing the graphene in between the PDMS result in enhanced bullet resistance.This work comparatively examines the enhancement in design of polymer nanocomposites to improve their bulletproofing response and the obtained results may serve as valuable guide for future experimental and theoretical studies.展开更多
The light weight heat treated B-grade bulletproof steel was developed through composition design and optimization based on multiplex alloying,multiplex micro-alloying design ideas and complex phase structure strengthe...The light weight heat treated B-grade bulletproof steel was developed through composition design and optimization based on multiplex alloying,multiplex micro-alloying design ideas and complex phase structure strengthening theory.The puzzle how to avoid the quenching deformation problem of super high strength thin sheet was solved through heat treatment in a die with a set of cooling system.Such B-grade bulletproof steel plate has fine tempered lath martensite structure.The shooting and certification test results showed that the shoot resistance of B-grade bulletproof steel plate can meet the protection demand of Protection specification for cash carrying vehicles(GA 164—2005).In comparison with B-grade bulletproof steel plate made by one of the companies in Sweden,the weight of the developed B-grade bulletproof steel plate can be decreased by 8 %under the same shoot resistance condition.It will be meaningful for cash truck and anti-hijacking vehicle to realize light weight,energy conservation and emission reduction.展开更多
Bulletproof steel plates are widely used for the safety of special vehicles.This paper mainly researches on the shoot resistance of heat treated light weight B-grade bulletproof steel plates through numerical analysis...Bulletproof steel plates are widely used for the safety of special vehicles.This paper mainly researches on the shoot resistance of heat treated light weight B-grade bulletproof steel plates through numerical analysis.Based on the flow behavior of bulletproof steel plates and bullet at various high strain rates,finite element(FE) model has been set up using ANSYS/LS-DYNA software.The simulation results are compared with the shooting results,which show a good consistency and a high reliability.Therefore,the simulation results are efficient approaches and strategies to decide and select the mechanical property and thickness of bulletproof steel plates,saving a lot of work and the cost of experiments.展开更多
In this paper,the high speed tension experiments have been performed on ultra high strength bulletproof steel.The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2....In this paper,the high speed tension experiments have been performed on ultra high strength bulletproof steel.The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm.The mechanical properties at strain rates of 0.001 s-1,0.01 s-1,0.1 s-1and 1 s-1were carried out on MTS810,while those at higher strain rates of 200 s-1,500 s-1and 1 000 s-1were tested on HTM5020 high speed tension tester and Hopkinson bar.The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation,and the fracture surface of each specimen was analyzed by scanning electron microscope(SEM).The results indicate that,the shoot resistance capability of bulletproof steel is closely related to its strength,thickness and flow behaviors under high strain rate.The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation.The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation.With the increase of strain rate,the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation.The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.展开更多
'我们所做的就是创造能与消费者产生共鸣的欲望——消除杂音、直击人心,并且确保在所有静态和动态的消费者接触点中,品牌都以一种真诚的形式呈现。''We create desire that emits at a frequency that resonates with consu...'我们所做的就是创造能与消费者产生共鸣的欲望——消除杂音、直击人心,并且确保在所有静态和动态的消费者接触点中,品牌都以一种真诚的形式呈现。''We create desire that emits at a frequency that resonates with consumers–cutting out the noise and connecting with the heart.We then ensure the brand lives and behaves in a heartfelt manner at all consumer touchpoints.”展开更多
基金financially supported by the National Key Research&Development Project(2017YFB1103505)the Military Logistics Research Program(XXXC002)of China。
文摘Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.
文摘In this paper the hit force of firing bullet on bulletproof helmet has been computed and the test device has been described. The device is divided into two parts: 1) The bullet, helmet and mould are in one system, using moment theorem to calculate the hit force; 2) The mould, sensor and support pole are in one system, using the method in reference [1] that measures the dynamic strain and displacement of simulate target of bulletproof clothes. We compute the transfigure energy and momentum energy when hitting the mould, the work done by the sensor and the expend energy of support pole. We get the hit force of helmet using energy balance principle. The result is according with the test and has been used to design the GGK93T bulletproof helmet and other serial products.
基金B.M.and X.Z.appreciate the funding by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)under Germany’s Excellence Strategy within the Cluster of Excellence PhoenixD(EXC 2122,Project ID 390833453).
文摘In modern physics and fabrication technology,simulation of projectile and target collision is vital to improve design in some critical applications,like;bulletproofing and medical applications.Graphene,the most prominent member of two dimensional materials presents ultrahigh tensile strength and stiffness.Moreover,polydimethylsiloxane(PDMS)is one of the most important elastomeric materials with a high extensive application area,ranging from medical,fabric,and interface material.In this work we considered graphene/PDMS structures to explore the bullet resistance of resulting nanocomposites.To this aim,extensive molecular dynamic simulations were carried out to identify the penetration of bullet through the graphene and PDMS composite structures.In this paper,we simulate the impact of a diamond bullet with different velocities on the composites made of single-or bi-layer graphene placed in different positions of PDMS polymers.The underlying mechanism concerning how the PDMS improves the resistance of graphene against impact loading is discussed.We discuss that with the same content of graphene,placing the graphene in between the PDMS result in enhanced bullet resistance.This work comparatively examines the enhancement in design of polymer nanocomposites to improve their bulletproofing response and the obtained results may serve as valuable guide for future experimental and theoretical studies.
文摘The light weight heat treated B-grade bulletproof steel was developed through composition design and optimization based on multiplex alloying,multiplex micro-alloying design ideas and complex phase structure strengthening theory.The puzzle how to avoid the quenching deformation problem of super high strength thin sheet was solved through heat treatment in a die with a set of cooling system.Such B-grade bulletproof steel plate has fine tempered lath martensite structure.The shooting and certification test results showed that the shoot resistance of B-grade bulletproof steel plate can meet the protection demand of Protection specification for cash carrying vehicles(GA 164—2005).In comparison with B-grade bulletproof steel plate made by one of the companies in Sweden,the weight of the developed B-grade bulletproof steel plate can be decreased by 8 %under the same shoot resistance condition.It will be meaningful for cash truck and anti-hijacking vehicle to realize light weight,energy conservation and emission reduction.
文摘Bulletproof steel plates are widely used for the safety of special vehicles.This paper mainly researches on the shoot resistance of heat treated light weight B-grade bulletproof steel plates through numerical analysis.Based on the flow behavior of bulletproof steel plates and bullet at various high strain rates,finite element(FE) model has been set up using ANSYS/LS-DYNA software.The simulation results are compared with the shooting results,which show a good consistency and a high reliability.Therefore,the simulation results are efficient approaches and strategies to decide and select the mechanical property and thickness of bulletproof steel plates,saving a lot of work and the cost of experiments.
文摘In this paper,the high speed tension experiments have been performed on ultra high strength bulletproof steel.The specimen were cut from B-grade bulletproof steel sheet after hard-module quenching with thickness of 2.3 mm.The mechanical properties at strain rates of 0.001 s-1,0.01 s-1,0.1 s-1and 1 s-1were carried out on MTS810,while those at higher strain rates of 200 s-1,500 s-1and 1 000 s-1were tested on HTM5020 high speed tension tester and Hopkinson bar.The data from the high speed tension experiments were fitted via Johnson-Cook constitutive equation,and the fracture surface of each specimen was analyzed by scanning electron microscope(SEM).The results indicate that,the shoot resistance capability of bulletproof steel is closely related to its strength,thickness and flow behaviors under high strain rate.The shoot resistance will be improved in the case of higher strength and better matching between strength and elongation.The Johnson-Cook constitutive equation fitted via experimental data provides fundament to numerical simulation.With the increase of strain rate,the size and depth of dimple trend to decrease and the depth of dimple changes less in steel with lower strength and higher elongation.The SEM analysis of fracture aspect is of benefit for further understanding of deformation and fracture mode under high strain rate.
文摘'我们所做的就是创造能与消费者产生共鸣的欲望——消除杂音、直击人心,并且确保在所有静态和动态的消费者接触点中,品牌都以一种真诚的形式呈现。''We create desire that emits at a frequency that resonates with consumers–cutting out the noise and connecting with the heart.We then ensure the brand lives and behaves in a heartfelt manner at all consumer touchpoints.”
