Analysis for the Deployment of Single-Point Mooring Buoy System Based on Multi-Body Dynamics Method

Deployment of buoy systems is one of the most important procedures for the operation of buoy system. In the present study, a single-point mooring buoy system which contains surface buoy, cable segments with components, anchor and so on is modeled by applying multi-body dynamics method. The motion equations are developed in discrete node description and fully Cartesian coordinates. Then numerical method is used to solve the ordinary differential equations and dynamics simulations are achieved while anchor is casting from board. The trajectories and velocities of different nodes without current and with current in buoy system are obtained. The transient tension force of each part of the cable is analyzed in the process of deployment. Numerical results indicate that the transient payload increases to a peak value when the anchor is touching the seabed and the maximum tension force will vary with different floating configuration. This work is helpful for design and deployment planning of buoy system.

Data Quality Control Method of a New Drifting Observation Technology Named Drifting Air-Sea Interface Buoy

An integral quality control(QC)procedure that integrates various QC methods and considers the design indexes and operational status of the instruments for the observations of drifting air-sea interface buoy was developed in the order of basic in-spection followed by targeted QC.The innovative method of combining a moving Hampel filter and local anomaly detection com-plies with statistical laws and physical processes,which guarantees the QC performance of meteorological variables.Two sets of observation data were used to verify the applicability and effectiveness of the QC procedure,and the effect was evaluated using the observations of the Kuroshio Extension Observatory buoy as the reference.The results showed that the outliers in the time series can be correctly identified and processed,and the quality of data improved significantly.The linear correlation between the quality-controlled observations and the reference increased,and the difference decreased.The correlation coefficient of wind speed before and after QC increased from 0.77 to 0.82,and the maximum absolute error decreased by approximately 2.8ms^(-1).In addition,air pressure and relative humidity were optimized by 10^(-3)–10^(-2) orders of magnitude.For the sea surface temperature,the weight of coefficients of the continuity test algorithm was optimized based on the sea area of data acquisition,which effectively expanded the applicability of the algorithm.

Variational Reconstruction and Simulation Experiments of Sea Surface Wind Field for Ocean Data Buoy

The sea surface wind field is an important physical parameter in oceanography and meteorology.With the continuous refinement of numerical weather prediction,air-sea interface materials,energy exchange,and other studies,three-dimensional(3D)wind field distribution at local locations on the sea surface must be measured accurately.The current in-situ observation of sea surface wind parameters is mainly achieved through the installation of wind sensors on ocean data buoys.However,the results obtained from this single-point measurement method cannot reflect wind field distribution in a vertical direction above the sea surface.Thus,the present paper proposes a theoretical framework for the optimal inversion of the 3D wind field structure variation in the area where the buoy is located.The variation analysis method is first used to reconstruct the wind field distribution at different heights of the buoy,after which theoretical analysis verification and numerical simulation experiments are conducted.The results indicate that the use of variational methods to reconstruct 3D wind fields is significantly effective in eliminating disturbance errors in observations,which also verifies the correctness of the theoretical analysis of this method.The findings of this article can provide a reference for the layout optimization design of wind measuring instruments in buoy observation systems and also provide theoretical guidance for the design of new observation buoys in the future.

Observation of Arctic surface currents using data from a surface drifting buoy

During the 10th Chinese Arctic scientific expedition carried out in the summer of 2019,the surface current in the high-latitude areas of the Arctic Ocean was observed using a self-developed surface drifting buoy,which was initially deployed in the Chukchi Sea.The buoy traversed the Chukchi Sea,Chukchi Abyssal Plain,Mendeleev Ridge,Makarov Basin,and Canada Basin over a period of 632 d.After returning to the Mendeleev Ridge,it continued to drift toward the pole.Overall,the track of the buoy reflected the characteristics of the transpolar drift and Chukchi Slope Current,as well as the inertial flow,cross-ridge surface flow,and even the surface disorganized flow for some time intervals.The results showed that:(1)the transpolar drift mainly occurs in the Chukchi Abyssal Plain,Mendeleev Ridge,and western Canada Basin to the east of the ridge where sea ice concentration is high,and the average northward flow velocity in the region between 79.41°N and 86.32°N was 5.1 cm/s;(2)the average surface velocity of the Chukchi Slope Current was 13.5 cm/s,and while this current moves westward along the continental slope,it also extends northwestward across the continental slope and flows to the deep sea;and(3)when sea ice concentration was less than 50%,the inertial flow was more significant(the maximum observed inertial flow was 26 cm/s,and the radius of the inertia circle was 3.6 km).

Mooring System of Ocean Turbulence Observation Based on Submerged Buoy

A comparison experiment has been taken in the Kiaochow Bay between a newly designed mooring turbulence observation instrument （MTOI） and microstructure profiler MSS60 made by Sea ＆ Sun. The whole observing system is based on a submerged buoy, in which the turbulence observation instrument is embedded, with a streamline-shape floating body, which is made of buoyancy material of glass microsphere. For the movement of seawater and the cable shaking strongly anytime influence the behaviors of the floating body, the accelerate sensors are used for the vibration measurement in the instrument together with the shear probe sensor. Both the vibration data and the shear data are acquired by the instrument at the same time. During data processing, the vibration signals can be removed and leave the shear data which we really need. In order to prove the reliability of the new turbulence instrument MTOI, a comparison experiment was designed. The measuring conditions are the same both in time and space. By this way, the two groups of data are comparable. In this paper, the conclusion gives a good similarity of 0.93 for the two groups of shear data in dissipation rate. The processing of the data acquired by MTOI is based on the cross-spectrum analysis, and the dissipation rate of it matches the Nasmyth spectrum well.

Simulation of the Power Take-off System for a Heaving Buoy Wave Energy Converter

The heaving buoy wave energy device is popular for wave conditions with small wave heights and short periods. This paper presents the design of a wave energy converter composed of a gyro buoy, a hydraulic power take-off, and an electricity generation system. The energy accumulators are used to improve the output power with different control strategies. The quantity relations between each component are established using theoretical methods. The simulation model describes the energy conversion and calculates the operation time, energy capacity, and output power of the device under different initial pressures, release pressures, and electric resistances. As a result, the capacity is determined by the electronic load, and the maximum output power can be obtained when the accumulators are turned on and off at the same time. This study investigates the factors influencing the electric energy production and can be used to guide the optimization of this type of device.

Experimental Research of Resistance on Deep Sea Buoys and Mooring Systems

-In this paper a series of model experiments of resistance on buoys and mooring system components are described. The experiments include: experiments of hydrodynamic resistance on buoys and mooring system components, and experiment of air resistance on buoys in wind tunnel. The results are compared with the Beto's results (1980) and some analyses are conducted. The experimental results provide a reliable basis and some parameters for the design of deep sea mooring systems.

Application of the state space model to the system of wave energy conversion Analytical method for wave forces on singleoscillating rectangular buoy

A new analytical method is proposed to analyze the force acting on a rectangular oscillating buoy due to linear waves.In the method a new analytical expression for the diffraction velocity potential is obtained first by use of theeigenfunction expansion method and then the wave excitation force is calculated by use of the known incident wavepotential and the diffraction potential. Compared with the classical analytical method, it can be seen that the presentmethod is simpler for a two-dimensional problem due to the comparable effort needed for the computation ofdiffraction potential and for that of radiated potential. To verify the correctness of the method, a classical example inthe reference is recomputed and the obtained results are in good accordance with those by use of other methods,which shows that the present method is correct.

Obtaining accurate measurements of the sea surface height from a GPS buoy

A dedicated GPS buoy is designed for calibration and validation(Cal/Val)of satellite altimeters since 2014.In order to evaluate the accuracy of the sea surface height(SSH)measured by the GPS buoy,twelve campaigns have been done within China sea area between 2014 and 2021.In six of these campaigns,two static Global Navigation Satellite System stations were installed at distances of<1 km and 19 km from the buoy to assess how the baseline length influenced the derived SSH from the buoy solutions.The GPS buoy data was processed using the GAMIT/GLOBK software+TRACK module and CSRS-PPP tool to achieve the SSH.The SSH was compared with conventionally tide gauge(TG)data to evaluate the accuracy of the buoy with the standard deviation of the height element.The results showed that the difference in the standard deviation of the SSH from the buoy and the TG was less than 16 mm.The SSHs processed with different ephemeris(Ultra-Rapid,Rapid,Final)were not significantly different.When the baseline length was 19 km,the SSH solution of the GPS buoy performed well,with standard bias of less than 26 mm between the heights measured by the buoy and TG,meaning that the buoy could be used for Cal/Val of altimeters.The bias between the Canadian Spatial Reference System-precise point positioning tool and the TRACK varied a lot,and some of them were over 130 mm.This deemed too high to be useful for Cal/Val of satellite altimeters.Moreover,the GPS buoy solutions processed by GAMIT/GLOBK software+TRACK module were used for in-orbit Cal/Val of HY-2B/C satellites in ten campaigns.The SSH and significant wave height of the altimeters showed good agreements with the GPS buoy solutions.

Assessment of Atmospheric Reanalysis Data Based on Buoy Observations over the Tropical Western Indian Ocean in 2019

Atmospheric reanalysis data are an important data source for studying weather and climate systems.The sea surface wind and sea level pressure observations measured from a real-time buoy system deployed in Kenya’s offshore area in 2019 conducted jointly by Chinese and Kenyan scientists were used to evaluate the performance of the major high-frequency atmospheric reanalysis products in the western Indian Ocean region.Compared with observations,the sea level pressure field could be accurately simulated using the atmospheric reanalysis data.However,significant discrepancies existed between the surface wind reanalysis data,especially between meridional wind and the observational data.Most of the data provide a complete understanding of sea level pressure,except for the Japanese 55-year Reanalysis data,which hold a significant system bias.The Modern-Era Reanalysis for Research and Applications,Version-2,provides an improved description of all datasets.All the reanalysis datasets for zonal wind underestimate the strength during the study period.Among reanalysis data,NCEP-DOE Atmospheric Model Intercomparison Project reanalysis data presents an inaccurate description due to the worst correlation with the observations.For meridional wind,most reanalysis datasets underestimate the variance,while the European Centre for Medium-Range Weather Forecasts Atmospheric Composition Reanalysis 4 has a larger variance than the observations.In addition to the original data comparison,the diurnal variability of sea level pressure and surface wind are also assessed,and the result indicates that the diurnal variations have a significant gap between observation and reanalysis data.This study indicates that the current high-frequency reanalysis data still have disadvantages when describing the atmospheric parameters in the Western Indian Ocean region.

对称系泊半潜平台在各种可能系泊组合下的动力学分析

In this technologically advancing world,the demand for more energy,oil and gas production is rapidly escalating.To accomplish this,people have inclined more towards completely floating offshore structures,deployed in deep waters.A semi-submersible is selected in the present study,due to its better response characteristics and stability under harsh environmental conditions.The semi-submersible is position restrain with spread mooring lines incorporated with submerged buoy at different locations has been studied.A detailed numerical analysis is carried out using Ansys Aqwa for dynamic response analysis of semi-submersible under the combination of wind,wave,and current forces for 0°,45°,and 90°directions.It was observed that damping ratios and natural periods had been affected based on the position and number of submerged buoys in the mooring system.Also,reduction in mooring force after incorporating buoy in the mooring lines was observed.Subsequently,a Matlab code based on the S-N curve approach was generated and employed to investigate the fatigue damage of mooring lines under dynamic variation of mooring forces.When pegged with submerged buoys,fatigue life of mooring lines is increased under intact and postulated damaged mooring conditions.Moreover,coupling of motion responses of semi-submersible is observed,and unbounded response is not seen in any degrees-offreedom,even during damaged condition of mooring lines.

The validation of HY-2 altimeter measurements of a significant wave height based on buoy data

HY-2 has been launched by China on August 16, 2011 which assembles multi-microwave remote sensing payloads in a body and has the ability of monitoring ocean dynamic environments. The HY-2 satellite data need to be calibrated and validated before being put into use. Based on the in-situ buoys from the Nation- al Data Buoy Center （NDBC）, Ku-band significant wave heights （SWH, hs） of HY-2 altimeter are validated. Eleven months of HY-2 altimeter Level 2 products data are chose from October 1, 2011 to August 29, 2012. Using NDBC 60 buoys yield 902 collocations for HY-2 by adopting collocation criteria of 30 min for tempo- ral window and 50 km for a spatial window. An overall RMS difference of the SWH between HY-2 and buoy data is 0.297 m. A correlation coefficient between these is 0.964. An ordinary least squares （OLS） regression is performed with the buoy data as an independent variable and the altimeter data as a dependent vari- able. The regression equation of hs is hs （HY-2）=0.891 × hs （NDBC）＋0.022. In addition, 2016 collocations are matched with temporal window of 30 rain at the crossing points of HY-2 and Jason-2 orbits. RMS difference of Ku-band SWH between the two data sets is 0.452 m.

Absolute calibration of HY-2A and Jason-2 altimeters for sea surface height using GPS buoy in Qinglan, China

GPS buoy methodology is one of the main calibration methodologies for altimeter sea surface height calibration. This study introduces the results of the Qinglan calibration campaign for the HY-2A and Jason-2 altimeters. It took place in two time slices;one was from August to September 2014, and the other was in July 2015. One GPS buoy and two GPS reference stations were used in this campaign. The GPS data were processed using the real-time kinematic (RTK) technique. The fi nal error budget estimate when measuring the sea surface height (SSH) with a GPS buoy was better than 3.5 cm. Using the GPS buoy, the altimeter bias estimate was about -2.3 cm for the Jason-2 Geophysical Data Record (GDR) Version ‘D' and from -53.5 cm to -75.6 cm for the HY-2A Interim Geophysical Data Record (IGDR). The bias estimates for Jason-2 GDR-D are similar to the estimates from dedicated calibration sites such as the Harvest Platform, the Crete Site and the Bass Strait site. The bias estimates for HY-2A IGDR agree well with the results from the Crete calibration site. The results for the HY-2A altimeter bias estimated by the GPS buoy were verifi ed by cross-calibration, and they agreed well with the results from the global analysis method.

Experimental Study on Interaction Between Degrees of Freedom in a Wave Buoy

Increasing degrees of freedom(DOFs)is a useful way to raise the power capture efficiency of oscillating wave energy converters.Thus,this study proposes a buoy with three DOFs,which are surge,heave,and pitch.The hydrodynamic performance and power capture efficiency of the buoy is physically modeled.Amplitudes of unidirectional and coupled motions are compared to analyze the interaction effect between freedoms under conditions with and without power take-off damping.The capture width ratio and corresponding growth rates are also calculated.Results show that the buoy makes a periodic sinusoidal(or approximate)movement in every DOF.Coupling effect can cause an increase in the amplitude in one DOF and a decrease in the amplitudes of the others.This phenomenon shows that the kinematic energy of the buoy redistributes to all DOFs compared with the unidirectional conditions.Adding DOFs can improve the power absorption of the buoy in most cases,but the number of DOFs is not the more the better.

Investigation on the Oscillating Buoy Wave Power Device

An oscillating buoy wave power device (OD) is a device extracting wave power by an oscillating buoy. Being excited by waves, the buoy heaves up and down to convert wave energy into electricity by means of a mechanical or hydraulic device. Compared with an Oscillating Water Column (OWC) wave power device, the OD has the same capture width ratio as the OWC does, but much higher secondary conversion efficiency. Moreover, the chamber of the OWC, which is the most expensive and difficult part to be built, is not necessary for the OD, so it is easier to construct an OD. In this paper, a numerical calculation is conducted for an optimal design of the OD firstly, then a model of the device is built and, a model test is carried out in a wave tank. The results show that the total efficiency of the OD is much higher than that of the OWC and that the OD is a promising wave power device.

Analytical optimization on GNSS buoy array for underwater positioning

Global navigation satellite system(GNSS)/acoustic positioning precision is determined by the positioning geometry and the ranging precision;thus optimizing GNSS buoys array is meaningful to improve the positioning accuracy and reliability.An analytical method is proposed for optimizing the GNSS buoys array with regard to the cutoff angle constraints for underwater acoustic observations.For the practical limitation of coplanarity of GNSS buoys and the cutoff angle,an algorithm is proposed to analytically minimize the position dilution of precision(PDOP).The proposed method is validated to give complete solutions of PDOP minimization with five GNSS buoys.At last,in order to search a best configuration among the PDOP solution set,we propose a search algorithm to get the solution with the smallest geometric dilution of precision(GDOP).It indicates that within a given region,the GDOP minimization at the center of a region is equivalent to the PDOP mean minimization over the region.The relation between the positioning accuracy and the positioning geometry with five known points is illustrated in an experiment performed in South China Sea.

Observed and modelled snow and ice thickness in the Arctic Ocean with CHINARE buoy data

Sea ice and the snow pack on top of it were investigated using Chinese National Arctic Research Expedition （CHINARE） buoy data. Two polar hydrometeorological drifters, known as Zeno ice stations, were deployed during CHINARE 2003. A new type of high-resolution Snow and Ice Mass Balance Arrays, known as SIMBA buoys, were deployed during CHINARE 2014. Data from those buoys were applied to investigate the thickness of sea ice and snow in the CHINARE domain. A simple approach was applied to estimate the average snow thickness on the basis of Zeno temperature data. Snow and ice thicknesses were also derived from vertical temperature profile data based on the SIMBA buoys. A one-dimensional snow and ice thermodynamic model （HIGHTSI） was applied to calculate the snow and ice thickness along the buoy drift trajectories. The model forcing was based on forecasts and analyses of the European Centre for Medium-Range Weather Forecasts （ECMWF）. The Zeno buoys drifted in a confined area during 2003-2004. The snow thickness modelled applying HIGHTSI was consistent with results based on Zeno buoy data. The SIMBA buoys drifted from 81. 1°N, 157.4°W to 73.5°N, 134.9°W in 15 months during 2014-2015. The total ice thickness increased from an initial August 2014 value of 1.97 m to a maximum value of 2.45 in before the onset of snow melt in May 2015; the last observation was approximately 1 m in late November 2015. The ice thickness based on HIGHTSI agreed with SIMBA measurements, in particular when the seasonal variation of oceanic heat flux was taken into account, but the modelled snow thickness differed from the observed one. Sea ice thickness derived from SIMBA data was reasonably good in cold conditions, but challenges remain in both snow and ice thickness in summer.

Current situation and trend of marine data buoy and monitoring network technology of China

Marine data buoy can provide a long-term, continuous, real-time, reliable data of ocean observation in a variety of complex marine environment. It is one of the most reliable, most effective and important means of ocean monitoring technology. In this paper, the classification, main theory and technology system of marine data buoy are summarized. The typical technological breakthrough of the development of marine data buoy in recent years is summarized. The composition and application of marine monitoring network in China was introduced, and the gap between the technology of China＇s marine data buoy and the international advanced countries is compared.Combined on the situation and demand of China＇s current situation and needs, the development trend of marine data buoy and buoy monitoring network are expected.

Dynamic Analysis of Propulsion Mechanism Directly Driven by Wave Energy for Marine Mobile Buoy

Marine mobile buoy（MMB） have many potential applications in the maritime industry and ocean science.Great progress has been made,however the technology in this area is far from maturity in theory and faced with many difficulties in application.A dynamic model of the propulsion mechanism is very necessary for optimizing the parameters of the MMB,especially with consideration of hydrodynamic force.The principle of wave-driven propulsion mechanism is briefly introduced.To set a theory foundation for study on the MMB,a dynamic model of the propulsion mechanism of the MMB is obtained.The responses of the motion of the platform and the hydrofoil are obtained by using a numerical integration method to solve the ordinary differential equations.A simplified form of the motion equations is reached by omitting terms with high order small values.The relationship among the heave motion of the buoy,stiffness of the elastic components,and the forward speed can be obtained by using these simplified equations.The dynamic analysis show the following：The angle of displacement of foil is fairly small with the biggest value around 0.3 rad;The speed of mobile buoy and the angle of hydrofoil increased gradually with the increase of heave motion of buoy;The relationship among heaven motion,stiffness and attack angle is that heave motion leads to the angle change of foil whereas the item of speed or push function is determined by vertical velocity and angle,therefore,the heave motion and stiffness can affect the motion of buoy significantly if the size of hydrofoil is kept constant.The proposed model is provided to optimize the parameters of the MMB and a foundation is laid for improving the performance of the MMB.

Experimental Study on the Hydrodynamic Performance of a Heaving Buoy Assembled on a Net Cage Platform

To take advantage of the abundance of both fishery and wave energy resources in offshore sea areas,a novel floating platform with a heaving buoy-based wave energy converter(WEC)assembled with a set of net cages is presented in this work.The floating WEC system provides a power supply,while the net cages are used for aquaculture.It is designed to have an independent and self-operation breeding function.An experimental study is carried out to investigate the hydrodynamic performance of the device in a wave tank considering the factors of net cages,draft depth,and power take-off,and results show that these variables have significant effects on wave energy capture.Incident waves with short periods cause intense interactions that allow the device to undergo large relative motion.The draft depth could be determined according to wave period rather than wave height.This study also explores the response amplitude operator of the device and determines its resonance scope.The experimental results could provide reliable information for future studies on phase differences and the design of two-body WECs.