The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

Buried interface management via bifunctional NH_(4)BF_(4)towards efficient CsPbI_(2)Br solar cells with a V_(oc)over 1.4 V

CsPbI_(2)Br perovskite solar cells(PSCs)have drawn tremendous attention due to their suitable bandgap,excellent photothermal stability,and great potential as an ideal candidate for top cells in tandem solar cells.However,the abundant defects at the buried interface and perovskite layer induce severe charge recombination,resulting in the open-circuit voltage(V_(oc))output and stability much lower than anticipated.Herein,a novel buried interface management strategy is developed to regulate interfacial carrier dynamics and CsPbI_(2)Br defects by introducing ammonium tetrafluoroborate(NH_(4)BF_(4)),thereby resulting in both high CsPbI_(2)Br crystallization and minimized interfacial energy losses.Specifically,NH_(4)^(+)ions could preferentially heal hydroxyl groups on the SnO_(2)surface and balance energy level alignment between SnO_(2)and CsPbI_(2)Br,enhancing charge transport efficiency,while BF_(4)^(-)anions as a quasi-halogen regulate crystal growth of CsPbI_(2)Br,thus reducing perovskite defects.Additionally,it is proved that eliminating hydroxyl groups at the buried interface enhances the iodide migration activation energy of CsPbI_(2)Br for strengthening the phase stability.As a result,the optimized CsPbI_(2)Br PSCs realize a remarkable efficiency of 17.09%and an ultrahigh V_(oc)output of 1.43 V,which is one of the highest values for CsPbI_(2)Br PSCs.

Inverting the rock mass P-wave velocity field ahead of deep buried tunnel face while borehole drilling

Imaging the wave velocity field surrounding a borehole while drilling is a promising and urgently needed approach for extending the exploration range of the borehole point.This paper develops a drilling process detection(DPD)system consisting of a multifunctional sensor and a pilot geophone installed at the top of the drilling rod,geophones at the tunnel face,a laser rangefinder,and an onsite computer.A weighted adjoint-state first arrival travel time tomography method is used to invert the P-wave velocity field of rock mass while borehole drilling.A field experiment in the ongoing construction of a deep buried tunnel in southwestern China demonstrated the DPD system and the tomography method.Time-frequency analysis of typical borehole drilling detection data shows that the impact drilling source is a pulse-like seismic exploration wavelet.A velocity field of the rock mass in a triangular area defined by the borehole trajectory and geophone receiving line can be obtained.Both the borehole core and optical image validate the inverted P-wave velocity field.A numerical simulation of a checkerboard benchmark model is used to test the tomography method.The rapid convergence of the misfits and consistent agreement between the inverted and observed travel times validate the P-wave velocity imaging.

Enhancing lead-free photovoltaic performance:Minimizing buried surface voids in tin perovskite films through weakly polar solvent pre-treatment strategy

Buried interfacial voids have always been a notorious phenomenon observed in the fabrication of lead perovskite films. The existence of interfacial voids at the buried interface will capture the carrier, suppress carrier transport efficiencies, and affect the stability of photovoltaic devices. However, the impact of these buried interfacial voids on tin perovskites, a promising avenue for advancing lead-free photovoltaics, has been largely overlooked. Here, we utilize an innovative weakly polar solvent pretreatment strategy(WPSPS) to mitigate buried interfacial voids of tin perovskites. Our investigation reveals the presence of numerous voids in tin perovskites during annealing, attributed to trapped dimethyl sulfoxide(DMSO) used in film formation. The WPSPS method facilitates accelerated DMSO evaporation, effectively reducing residual DMSO. Interestingly, the WPSPS shifts the energy level of PEDOT:PSS downward, making it more aligned with the perovskite. This alignment enhances the efficiency of charge carrier transport. As the result, tin perovskite film quality is significantly improved,achieving a maximum power conversion efficiency approaching 12% with only an 8.3% efficiency loss after 1700 h of stability tests, which compares well with the state-of-the-art stability of tin-based perovskite solar cells.

CFD Investigation of Diffusion Law and Harmful Boundary of Buried Natural Gas Pipeline in the Mountainous Environment

The leakage gas from a buried natural gas pipelines has the great potential to cause economic losses and environmental pollution owing to the complexity of the mountainous environment.In this study,computational fluid dynamics(CFD)method was applied to investigate the diffusion law and hazard range of buried natural gas pipeline leakage in mountainous environment.Based on cloud chart,concentration at the monitoring site and hazard range of lower explosion limit(LEL)and upper explosion limit(UEL),the influences of leakage hole direction and shape,soil property,burial depth,obstacle type on the diffusion law and hazard range are analyzed.Results show that the leakage gas is not radially diffused until it reaches the ground,and the velocity of gas diffusion to the ground and the hazard range decrease as the angle between the leaking direction and the buoyancy direction increases.Triangular and square leak holes have a faster diffusion rate and a wider hazard range than circular.The diffusion rate of leakage gas in soil rises as soil granularity and porosity increase.The time of leakage gas diffusion to the ground increases significantly with the increase of burial depth,and the hazard range reduces as burial depth increases.Boulder-type obstacles will alter the diffusion path of the leakage gas and accelerate the expansion of the hazard distance,while trench-type obstacles will cause the natural gas to accumulate in the trench and form a high concentration region slowing the expansion of the surface gas concentration.

Synergistic Optimization of Buried Interface by Multifunctional Organic-Inorganic Complexes for Highly Efficient Planar Perovskite Solar Cells

For the further improvement of the power conversion efficiency(PCE)and stability of perovskite solar cells(PSCs),the buried interface between the perovskite and the electron transport layer is crucial.However,it is challenging to effectively optimize this interface as it is buried beneath the perovskite film.Herein,we have designed and synthesized a series of multifunctional organic-inorganic(OI)complexes as buried interfacial material to promote electron extraction,as well as the crystal growth of the perovskite.The OI complex with BF4−group not only eliminates oxygen vacancies on the SnO_(2) surface but also balances energy level alignment between SnO_(2) and perovskite,providing a favorable environment for charge carrier extraction.Moreover,OI complex with amine(−NH_(2))functional group can regulate the crystallization of the perovskite film via interaction with PbI2,resulting in highly crystallized perovskite film with large grains and low defect density.Consequently,with rational molecular design,the PSCs with optimal OI complex buried interface layer which contains both BF4−and−NH_(2) functional groups yield a champion device efficiency of 23.69%.More importantly,the resulting unencapsulated device performs excellent ambient stability,maintaining over 90%of its initial efficiency after 2000 h storage,and excellent light stability of 91.5%remaining PCE in the maximum power point tracking measurement(under continuous 100 mW cm−2 light illumination in N2 atmosphere)after 500 h.

Stabilizing Buried Interface via Synergistic Effect of Fluorine and Sulfonyl Functional Groups Toward Efficient and Stable Perovskite Solar Cells

The interfacial defects and energy barrier are main reasons for interfacial nonradiative recombination.In addition,poor perovskite crystallization and incomplete conversion of PbI_(2) to perovskite restrict further enhancement of the photovoltaic performance of the devices using sequential deposition.Herein,a buried interface stabilization strategy that relies on the synergy of fluorine(F)and sulfonyl(S=O)functional groups is proposed.A series of potassium salts containing halide and non-halogen anions are employed to modify SnO_(2)/perovskite buried interface.Multiple chemical bonds including hydrogen bond,coordination bond and ionic bond are realized,which strengthens interfacial contact and defect passivation effect.The chemical interaction between modification molecules and perovskite along with SnO_(2) heightens incessantly as the number of S=O and F augments.The chemical interaction strength between modifiers and perovskite as well as SnO_(2) gradually increases with the increase in the number of S=O and F.The defect passivation effect is positively correlated with the chemical interaction strength.The crystallization kinetics is regulated through the compromise between chemical interaction strength and wettability of substrates.Compared with Cl−,all non-halogen anions perform better in crystallization optimization,energy band regulation and defect passivation.The device with potassium bis(fluorosulfonyl)imide achieves a tempting efficiency of 24.17%.

Decipher hydrocarbon generation and accumulation based on fluid inclusion and chronology:A case study from the Upper Paleozoic buried-hills in Huanghua Depression,Bohai Bay Basin

Deciphering hydrocarbon generation and accumulation stage is of significance to understand oil and gas evolution and seek exploration targets.Taking the Upper Paleozoic buried-hills in the Huanghua Depression,Bohai Bay Basin,as a case study,hydrocarbon generation environment and detailed accumulation process are revealed by fluid inclusions observations,Laser Raman spectroscopy,Fourier Infrared spectroscopy,and K-Ar isotope measurements.The results show that both oil and gas inclusion were captured in the quartz overgrowth,dissolved feldspar and calcite microfractures,showing blue to dark brown fluoresce.The grains containing oil inclusions index(GOI)of oil,oil&gas and gas being 25%,65%,and 10%and the inclusions with abundant methyl groups and short chains,both indicate high thermal maturity.One series of fluids inclusion is generally observed,evidenced by the concentrated homogenization temperature of 135-145℃ and salinity of 3%-15 w.t.%NaCl equiv,indicating one primary charging stage.The gas and gas&liquid inclusions mainly contain CH_(4),with also peaks indicating CO_(2) and N_(2.)The Carboniferous and Permian biomarkers show reducing environment with brackish water,with organic matter sources both from marine and continental.The relative content ofααα20RC_(27),ααα20RC_(28),andααα20RC_(29) exhibit source contributions both from algae and higher plants,and mainly of II2 to III kerogen.Both coal derived gas and oil associated hydrocarbons are identified from most of the buried-hills.Combining the fluid homogenization temperature and salinity,as well as the thermal evolution history,the hydrocarbon generated from the Upper Paleozoic was concentrated at the end of the Eocene(40 Ma±),while the beginning of charging is 60 Ma±.The Wumaying Buried-hill is of only coal derived gas and has potential for inner coal measure natural gas exploration.The results provide a detailed understanding of hydrocarbon accumulations in the study area,which can also be reference for improving petroleum exploration efficiency in similar basins.

Ground fissure development regularity and formation mechanism of shallow buried coal seam mining with Karst landform in Jiaozi coal mine: a case study

A comprehensive study was undertaken at Jiaozi coal mine to investigate the development regularity of ground fissures in shallow buried coal seam mining with Karst landform,shedding light on the development type,geographical distribution,dynamic development process,and failure mechanism of these ground fissures by employing field monitoring,numerical simulation,and theoretical analysis.The findings demonstrate that ground fissure development has an obvious feature of subregion,and its geographical distribution is significantly affected by topography.Tensile type,open type,and stepped type are three different categories of ground fissure.Ground fissures emerge dynamically as the panel advances,and they typically develop with a distance of less than periodic weighting step distance in advance of panel advancing position.Ground fissures present the dynamic development feature,temporary fissure has the ability of self-healing.The dynamic development process of ground fissure with closed-distance coal seam repeated mining is expounded,and the development scale is a dynamic development stage of“closure→expansion→stabilized”on the basis of the original development scale.From the perspective of topsoil deformation,the computation model considering two points movement vectors towards two directions of the gob and the ground surface is established,the development criterion considering the critical deformation value of topsoil is obtained.The mechanical model of hinged structure of inclined body is proposed to clarify the ground fissure development,and the interaction between slope activity and ground fissure development is expounded.These research results fulfill the gap of ground fissures about development regularity and formation mechanism,and can contribute to ground fissure prevention and treatment with Karst landform.

Self‑Generated Buried Submicrocavities for High‑Performance Near‑Infrared Perovskite Light‑Emitting Diode

ABSTRACT Embedding submicrocavities is an effective approach to improve the light out-coupling efficiency(LOCE)for planar perovskite light-emitting diodes(PeLEDs).In this work,we employ phenethylammonium iodide(PEAI)to trigger the Ostwald ripening for the downward recrystallization of perovskite,resulting in spontaneous formation of buried submicrocavities as light output coupler.The simulation suggests the buried submicrocavities can improve the LOCE from 26.8 to 36.2%for near-infrared light.Therefore,PeLED yields peak external quantum efficiency(EQE)increasing from 17.3%at current density of 114 mA cm^(−2)to 25.5%at current density of 109 mA cm^(−2)and a radiance increasing from 109 to 487 W sr^(−1)m^(−2)with low rolling-off.The turn-on voltage decreased from 1.25 to 1.15 V at 0.1 W sr^(−1)m^(−2).Besides,downward recrystallization process slightly reduces the trap density from 8.90×10^(15)to 7.27×10^(15)cm^(−3).This work provides a self-assembly method to integrate buried output coupler for boosting the performance of PeLEDs.

Physics-based and data-driven modeling for stability evaluation of buried structures in natural clays

This study presents a hybrid framework to predict stability solutions of buried structures under active trapdoor conditions in natural clays with anisotropy and heterogeneity by combining physics-based and data-driven modeling.Finite-element limit analysis(FELA)with a newly developed anisotropic undrained shear(AUS)failure criterion is used to identify the underlying active failure mechanisms as well as to develop a numerical(physics-based)database of stability numbers for both planar and circular trapdoors.Practical considerations are given for natural clays to three linearly increasing shear strengths in compression,extension,and direct simple shear in the AUS material model.The obtained numerical solutions are compared and validated with published solutions in the literature.A multivariate adaptive regression splines(MARS)algorithm is further utilized to learn the numerical solutions to act as fast FELA data-driven surrogates for stability evaluation.The current MARS-based modeling provides both relative importance index and accurate design equations that can be used with confidence by practitioners.

Natural aging mechanism of buried polyethylene pipelines during long-term service

Currently,accelerated aging tests are widely used to study the aging process of polyethylene pipelines.However,this approach can only simulate one or several main influencing factors in the natural environment,which are often quite different from the actual environment of the buried pipelines.In this study,five types of PE80 buried pipelines in service for 9e18 years were taken as the research object,while new PE80 pipelines were taken as the reference group.The aging process and mechanism of polyethylene buried pipelines were studied through mechanical and chemical property tests and microstructural analysis.The results showed that the pipeline exhibited cross-linking as the main aging mechanism after being in service for 0e18 years.The aging degree and law of the inner and outer surface of the pipeline were compared,and the observed mechanism of both surfaces was explained.After 18 years in service,the elongation at the break of the pipe decreased by 16.2%,and the toughness of the matrix in the main collapse area of the tensile sample was the fundamental reason responsible for changes in the mechanical properties.Finally,after 18 years in service,the oxidation induction time of the pipeline was 25.7 min,which was 28.5% higher than the national standard value.There were no potential safety hazards during continuous long-term service.The results of this paper provide reference data and theoretical guidance for the aging process study of buried polyethylene pipelines.

Dynamic analysis of buried pipeline with and without barrier system subjected to underground detonation

Failure of pipe networks due to blast loads resulting from terrorist attacks or construction facilities, may cause economic loss, environmental pollution, source of firing or even it may lead to a disaster. The present work develops a closed-form solution of buried pipe with barrier system subjected to subsurface detonation. The solution is derived based on the concept of double-beam system. Euler Bernoulli's beams are used to simulate the buried pipe and the barrier system. Soil is idealized as viscoelastic foundation along with shear interaction between discrete Winkler springs(advanced soil model). The finite SineFourier transform is employed to solve the coupled partial differential equations. The solution is validated with past studies. A parametric study is conducted to investigate the influence of TNT charge weight, pipe material, damping ratio and TNT offset on the response of buried pipe with and without barrier system. Further a statistical analysis is carried out to get the significant soil and pipe input parameters. It is perceived that peak pipe displacements for both the cases(with and without barrier) are increases with increasing the weight of TNT charge and decreases with increasing the damping ratio and TNT offset. The deformation of pipe also varies with pipe material. Pipe safety against blast loads can be ensured by providing suitable barrier layer. The present study can be utilized in preliminary design stage as an alternative to expensive numerical analysis or field study.

Unraveling abnormal buried interface anion defect passivation mechanisms depending on cation-induced steric hindrance for efficient and stable perovskite solar cells

Although ionic liquids(ILs)have been widely employed to heal the defects in perovskite solar cells(PSCs),the corresponding defect passivation mechanisms are not thoroughly understood up to now.Herein,we first reveal an abnormal buried interface anion defect passivation mechanism depending on cationinduced steric hindrance.The IL molecules containing the same anion([BF4]^(-))and different sizes of imidazolium cations induced by substituent size are used to manipulate buried interface.It was revealed what passivated interfacial defects is mainly anions instead of cations.Theoretical and experimental results demonstrate that the large-sized cations can weaken the ionic bond strength between anions and cations,and facilitate the interaction between anions and SnO2as well as perovskites,which is conducive to interfacial defect passivation and ameliorating interfacial contact.It can be concluded that interfacial chemical interaction strength and defect passivation effect are positively correlated with the size of cations.The discovery breaks conventional thinking that large-sized modification molecules would weaken their chemical interaction with perovskite.Compared with the control device(21.54%),the device based on 1,3-Bis(1-adamantyl)-imidazolium tetrafluoroborate(BAIMBF4)with maximum size cations achieves a significantly enhanced efficiency of 23.61%along with much increased moisture,thermal and light stabilities.

Buried bumper syndrome:A critical analysis of endoscopic release techniques

Buried bumper syndrome(BBS)is the situation in which the internal bumper of the gastrostomy tube,due to prolonged compression of the tissues between the external and the internal bumper,migrates from the gastric lumen into the gastric wall or further,into the tract outside the gastric lumen,ending up anywhere between the stomach mucosa and the surface of the skin.This restricts liquid food from entering the stomach,since the internal opening is obstructed by gastric mucosal overgrowth.We performed a comprehensive search of the PubMed literature to retrieve all the case-reports and case-series referring to BBS and its management,after which we focused on the endoscopic techniques for releasing the internal bumper to re-establish the functionality of the tube.From the“push”and the“push and pull T”techniques to the most sophisticated-using high tech instruments,all 10 published techniques have been critically analysed and the pros and cons presented,in an effort to optimize the criteria of choice based on maximum efficacy and safety.

Identification and evaluation of fault-fracture reservoirs in buried hills of the Lower Paleozoic, Chengdao area, China

The Bohai Bay Basin is a Meso-Cenozoic rifted basin where the Paleozoic buried hills with great hydrocarbon potentials are well developed. The reservoir space types are complex and diverse due to tectonic activities, making fracture distribution highly heterogeneous. Reservoir identification and mapping is challenging due to their large burial depth and poor resolution of seismic data. An integration of well-logging, seismic data interpretation and core observation is applied to identify three structural unit types in the study area, that is, fault breccia zone, fault cataclastic zone, and fault massive rock zone. A comprehensive well-logging identification template and a comprehensive discriminant function M for the reservoir are established based on the well-logging response characteristics. A M value greater than 0.12 indicates a fault breccia zone, that between 0.04 and 0.12 marks a fault cataclastic zone, and that in the range from 0.02 to 0.04 represents a fault massive rock zone. A seismic prediction method with multi-parameter fusion is proposed in the study. The large-scale fractures are mapped by coherence-clutter parameters, while small fractures are predicted via waveform indication inversion. The spatial distribution of “fault-fracture reservoirs” is precisely mapped by frequency fusion technology. It is found that the fault breccia zones usually occur close to the fault planes, while the fault cataclastic zones are slightly away from the fault planes. The hydrocarbon abundance of the breccia zones is greater than that of the fault cataclastic and fault massive rock zones.

Experimental Study on Phase Characteristics of CO2 Injection in BZ13-2 Strong Volatile Oil Reservoir in Bohai Sea Buried Hills

BZ13-2 oil field is a deep submerged strongly volatile reservoir in Bohai Sea. This oil reservoir has the characteristics of high gas oil ratio and small difference in formation pressure and saturation point pressure. It usually adopts gas injection development to avoid crude oil degassing and fast decreasing production capacity. However, the phase characteristics and miscibility mechanism of this high-temperature and high-pressure fluid after gas injection are not clear. Therefore, it is necessary to study the feasibility of CO2 injection to improve oil recovery in near critical volatile oil reservoirs through CO2 injection experiments. In the early stage of the depletion experiment, the content of heavy components in the remaining oil increased significantly, so the depletion method is not conducive to the development of such reservoirs. With the increase of CO2 injection, the volumetric expansion coefficient of formation crude oil increases significantly, while the saturation pressure and formation crude oil viscosity remain basically unchanged. The minimum miscible pressure experiment shows that CO2 injection under formation pressure conditions can achieve multiphase miscibility. Based on experimental research results, the BZ13-2 oilfield is suitable for early gas injection development and can significantly improve recovery.

Sensitivity of Total-Dose Radiation Hardness of SIMOX Buried Oxides to Doses of Nitrogen Implantation into Buried Oxides

In order to improve the total-dose radiation har dness of the buried oxides(BOX) in the structure of separation-by-implanted-oxygen(SIMOX) silicon-on-insulator(SOI),nitrogen ions are implanted into the buried oxides with two different doses,2×10 15 and 3×10 15 cm -2 ,respectively.The experimental results show that the radiation hardness of the buried oxides is very sensitive to the doses of nitrogen implantation for a lower dose of irradiation with a Co-60 source.Despite the small difference between the doses of nitrogen implantation,the nitrogen-implanted 2×10 15 cm -2 BOX has a much higher hardness than the control sample (i.e.the buried oxide without receiving nitrogen implantation) for a total-dose irradiation of 5×104rad(Si),whereas the nitrogen-implanted 3×10 15 cm -2 BOX has a lower hardness than uhe control sample.However,this sensitivity of radiation hardness to the doses of nitrogen implantation reduces with the increasing total-dose of irradiation (from 5×104 to 5×105rad (Si)).The radiation hardness of BOX is characterized by MOS high-frequency (HF) capacitance-voltage (C-V) technique after the top silicon layers are removed.In addition,the abnormal HF C-V curve of the metal-silicon-BOX-silicon(MSOS) structure is observed and explained.

Static Induction Devices with Planar Type Buried Gate

Based on the surface-gate and buried-gate structures,a novel buried-gate structure called the planar type buried-gate (PTBG) structure for static induction devices (SIDs) is proposed.An approach to realize a buried-gate type static induction transistor by conventional planar process technology is presented.Using this structure,it is successfully avoided the second epitaxy with a high degree of difficulty and the complicated mesa process in conventional buried gate.The experimental results demonstrate that this structure is desirable for application in power SIDs.Its advantages are high breakdown voltage and blocking gain.

Ground surface response induced by shallow buried explosions

Based on the spherical cavity expansion theory in the elastic half space,the ground surface movement characteristics of shallowly buried explosions are analyzed.The results show that the induced seismic wave is a longitudinal wave in the near zone and a Rayleigh wave in the far zone.The maximum displacement(velocity) of the longitudinal wave and the Rayleigh wave are inversely proportional to the scaled distance,and can be described by exponential function with exponents equal to 1.4 and 0.5,respectively.The vibration frequencies of the waves have almost no change.The vibration frequency of the longitudinal wave approximates the natural vibration frequency of the cavity in the broken area,and the vibration frequency of the Rayleigh wave is about half that of the longitudinal wave.On the same reduced buried depth and reduced distance,the particle displacement is directly proportional to the product of the boundary loading and cavity radius,and is inversely proportional to the transversal wave velocity.Meanwhile,the particle velocity is directly proportional to the boundary loading and inversely proportional to the wave velocity ratio.In the far zone,the buried depth of the explosive only has a slight effect on the longitudinal wave,but has a larger effect on the Rayleigh wave.