Natural aging mechanism of buried polyethylene pipelines during long-term service

Currently,accelerated aging tests are widely used to study the aging process of polyethylene pipelines.However,this approach can only simulate one or several main influencing factors in the natural environment,which are often quite different from the actual environment of the buried pipelines.In this study,five types of PE80 buried pipelines in service for 9e18 years were taken as the research object,while new PE80 pipelines were taken as the reference group.The aging process and mechanism of polyethylene buried pipelines were studied through mechanical and chemical property tests and microstructural analysis.The results showed that the pipeline exhibited cross-linking as the main aging mechanism after being in service for 0e18 years.The aging degree and law of the inner and outer surface of the pipeline were compared,and the observed mechanism of both surfaces was explained.After 18 years in service,the elongation at the break of the pipe decreased by 16.2%,and the toughness of the matrix in the main collapse area of the tensile sample was the fundamental reason responsible for changes in the mechanical properties.Finally,after 18 years in service,the oxidation induction time of the pipeline was 25.7 min,which was 28.5% higher than the national standard value.There were no potential safety hazards during continuous long-term service.The results of this paper provide reference data and theoretical guidance for the aging process study of buried polyethylene pipelines.

Dynamic analysis of buried pipeline with and without barrier system subjected to underground detonation

Failure of pipe networks due to blast loads resulting from terrorist attacks or construction facilities, may cause economic loss, environmental pollution, source of firing or even it may lead to a disaster. The present work develops a closed-form solution of buried pipe with barrier system subjected to subsurface detonation. The solution is derived based on the concept of double-beam system. Euler Bernoulli's beams are used to simulate the buried pipe and the barrier system. Soil is idealized as viscoelastic foundation along with shear interaction between discrete Winkler springs(advanced soil model). The finite SineFourier transform is employed to solve the coupled partial differential equations. The solution is validated with past studies. A parametric study is conducted to investigate the influence of TNT charge weight, pipe material, damping ratio and TNT offset on the response of buried pipe with and without barrier system. Further a statistical analysis is carried out to get the significant soil and pipe input parameters. It is perceived that peak pipe displacements for both the cases(with and without barrier) are increases with increasing the weight of TNT charge and decreases with increasing the damping ratio and TNT offset. The deformation of pipe also varies with pipe material. Pipe safety against blast loads can be ensured by providing suitable barrier layer. The present study can be utilized in preliminary design stage as an alternative to expensive numerical analysis or field study.

Centrifuge modeling of buried continuous pipelines subjected to normal faulting

Seismic ground faulting is the greatest hazard for continuous buried pipelines.Over the years,researchers have attempted to understand pipeline behavior mostly via numerical modeling such as the finite element method.The lack of well-documented field case histories of pipeline failure from seismic ground faulting and the cost and complicated facilities needed for full-scale experimental simulation mean that a centrifuge-based method to determine the behavior of pipelines subjected to faulting is best to verify numerical approaches.This paper presents results from three centrifuge tests designed to investigate continuous buried steel pipeline behavior subjected to normal faulting.The experimental setup and procedure are described and the recorded axial and bending strains induced in a pipeline are presented and compared to those obtained via analytical methods.The influence of factors such as faulting offset,burial depth and pipe diameter on the axial and bending strains of pipes and on ground soil failure and pipeline deformation patterns are also investigated.Finally,the tensile rupture of a pipeline due to normal faulting is investigated.

Stress analysis on large-diameter buried gas pipelines under catastrophic landslides

This paper presents a method for analysis of stress and strain of gas pipelines under the effect of horizontal catastrophic landslides. A soil spring model was used to analyze the nonlinear characteristics concerning the mutual effects between the pipeline and the soil. The Ramberg–Osgood model was used to describe the constitutive relations of pipeline materials. This paper also constructed a finite element analysis model using ABAQUS finite element software and studied the distribution of the maximum stress and strain of the pipeline and the axial stress and strain along the pipeline by referencing some typical accident cases. The calculation results indicated that the maximum stress and strain increased gradually with the displacement of landslide.The limit values of pipeline axial stress strain appeared at the junction of the landslide area and non-landslide area. The stress failure criterion was relatively more conservative than the strain failure criterion. The research results of this paper may be used as a technical reference concerning the design and safety management of large-diameter gas pipelines under the effects of catastrophic landslides.

Horizontal Normal Force on Buried Rigid Pipelines in Fluctuant Liquefied Silty Soil

The submarine pipelines that are buried in the Yellow River subaqueous delta can be subject to fluctuant local-liquefied soil caused by storm wave action, possibly causing pipeline damage. An experimental investigation was carried out in a wave flume to study the horizontal normal force on buried rigid pipelines in fluctuant liquefied soil. In this experiment, the soil bed was made of silt from the Yellow River Delta, whereas a steel pipe served as pipeline. Under the experimental conditions, the normal force range on the pipeline in fluctuant liquefied soil was several times higher than that in stable soil, specifically on the side of the pipeline exposed to the wave direction. The resultant force of the horizontal normal forces on the buried pipeline grew by about one order of magnitude after soil liquefaction.

Intensity measures for the seismic response evaluation of buried steel pipelines under near-field pulse-like ground motions

Ground-motion Intensity Measures (IMs) are used to quantify the strength of ground motions and evaluate the response of structures. IMs act as a link between seismic demand and seismic hazard analysis and therefore, have a key role in performance-based earthquake engineering. Many studies have been carried out on the determination of suitable IMs in terms of effi ciency, suffi ciency and scaling robustness. The majority of these investigations focused on ordinary structures such as buildings and bridges, and only a few were about buried pipelines. In the current study, the optimal IMs for predicting the seismic demand of continuous buried steel pipelines under near-fi eld pulse-like ground motion records is investigated. Incremental dynamic analysis is performed using twenty ground motion records. Using the results of the regression analysis, the optimality of 23 potential IMs are studied. It is concluded that specifi c energy density (SED) followed by VSI[ω1(PGD+RMSd )] are the optimal IMs based on effi ciency, suffi ciency and scaling robustness for seismic response evaluation of buried pipelines under near-fi eld ground motions.

Engineering measures for preventing upheaval buckling of buried submarine pipelines

In-service hydrocarbons must be transported at high temperature and high pressure to ease the flow and to prevent the solidification of the wax fraction. The high temperature and high pressure will induce the additional stress in the pipeline, which results in the upheaval buckling of the pipeline. If such expansion is resisted, e.g., by the frictional effects of the foundation soil over a kilometer or of a pipeline, the compressive axial stress will be set up in the pipe-wall. When the stress exceeds the constraint of the foundation soil on the pipeline, suddenly-deforming will occur to release the internal stress, similar to the sudden deformation of the strut due to stability problems. The upheaval buckling may jeopardize the structural integrity of the pipeline. Therefore, effective engineering measures against this phenomenon play an important role in the submarine pipeline design. In terms of the pipeline installation and protection measures commonly used in Bohai Gulf, three engineering measures are investigated in great details. An analytical method is introduced and developed to consider the protection effect of the anti-upheaval buckling of the pipeline. The analysis results show that the amplitude of the initial imperfection has a great effect on the pipeline thermal upheaval buckling. Both trenching and burial and discrete dumping are effective techniques in preventing the pipeline from buckling. The initial imperfection and operation conditions of the pipelines determine the covered depth and the number of layers of the protection measures.

An electrochemical method for evaluating the resistance to cathodic disbondment of anti-corrosion coatings on buried pipelines

Methods for evaluating the resistance to cathodic disbondment （RCD） of anti-corrosion coatings on buried pipelines were reviewed. It is obvious that these traditional cathodic disbondment tests （CDT） have some disadvantages and the evaluated results are only simple figures and always rely on the subjective experience of the operator. A new electrochemical method for evaluating the RCD of coatings, that is, the potentiostatic evaluation method （PEM）, was developed and studied. During potentiostatic anodic polarization testing, the changes of stable polarization current of specimens before and after cathodic disbonding （CD） were measured, and the degree of cathodic disbondment of the coating was quantitatively evaluated, among which the equivalent cathodic disbonded distance AD was suggested as a parameter for evaluating the RCD. A series of testing parameters of the PEM were determined in these experiments.

An equivalent-boundary method for the shell analysis of buried pipelines under fault movement

A new shell finite element method (FEM) model with an equivalent boundary is presented for estimating the re- sponse of a buried pipeline under large fault movement. The length of affected pipeline under fault movement is usually too long for a shell-mode calculation because of the limitation of memory and time of computers. In this study, only the pipeline segment near fault is modeled with plastic shell elements to study the local buckling and the large section deformation in pipe. The material property of pipe segment far away from the fault is considered as elastic, and nonlinear spring elements at equivalent boundaries are obtained and applied to two ends of shell model. Compared with the fixed-boundary shell model, the shell model with an equivalent boundary proposed by the study can remarkably reduce the needed memory and calculating time.

Finite element analysis of fluid-structure interaction in buried liquid-conveying pipeline

Long distance buried liquid-conveying pipeline is inevitable to cross faults and under earthquake action,it is necessary to calculate fluid-structure interaction(FSI) in finite element analysis under pipe-soil interaction.Under multi-action of site,fault movement and earthquake,finite element model of buried liquid-conveying pipeline for the calculation of fluid structure interaction was constructed through combinative application of ADINA-parasolid and ADINA-native modeling methods,and the direct computing method of two-way fluid-structure coupling was introduced.The methods of solid and fluid modeling were analyzed,pipe-soil friction was defined in solid model,and special flow assumption and fluid structure interface condition were defined in fluid model.Earthquake load,gravity and displacement of fault movement were applied,also model preferences.Finite element research on the damage of buried liquid-conveying pipeline was carried out through computing fluid-structure coupling.The influences of pipe-soil friction coefficient,fault-pipe angle,and liquid density on axial stress of pipeline were analyzed,and optimum parameters were proposed for the protection of buried liquid-conveying pipeline.

Response analysis of buried pipelines crossing fault due to overlying soil rupture

A 3-D soil-pipe nonlinear finite element model with contact element is suggested and the influences of the rupture mode, thickness and rigidity of overlying soil on the response of buried pipeline are analyzed. The numerical results show that the soil rupture mode determines the location of the large deformation or failure of the pipeline, and the plastic de- formation of the pipeline occurs at the zone where the plastic deformation or rupture of the overlying soil appears. When the fault dip angle on bedrock is near 90°, two plastic deformation sections of the pipeline appear with the development of overlying soil rupture. And the thicker the overlying soil is, the longer the plastic deformation length of the pipeline is and the less its strain is. The plastic deformation length of the pipeline decreases while its maximum strain increases with the rigidity of overlying soil increasing.

Research on Corrosion Protection of Buried Steel Pipeline

The corrosion types of buried steel pipelines were summarized from two aspects of internal corrosion and external corrosion;the main detection technology for internal and external corrosion was introduced;and the protective measures for corrosion and corrosion of buried steel pipelines were presented. The study of corrosion protection for buried steel pipeline provided the basis for the corrosion protection of buried steel pipeline.

The Study of Electromagnetic Stress Testing Method on Oil-Gas Pipelines Based on WT

This paper proposes an effective method for early diagnosis (stress concentrating) of the oil-gas pipeline. Based on the principle of electromagnetic induction Faraday, we have designed and realized the nondestructive testing system for stress concentration area of ferromagnetic materials by means of the research of metal materials inverse magnetostrictive effect mechanism. The system changes the influence degree of the stress in ferromagnetic materials’ magnetic conductance to the corresponding voltage array by using discrete wavelet analysis method to process the data, in which not only the measuring accuracy is improved, but also the stress concentration is more directly reflected. The experiments confirm that the electromagnetic stress testing method is feasible and valid.

Study on the Economic Insulation Thickness of the Buried Hot Oil Pipelines Based on Environment Factors

It is important to determine the insulation thickness in the design of the buried hot oil pipelines.The economic thickness of the insulation layer not only meets the needs of the project but also maximizes the investment and environmental benefits.However,as a significant evaluation,the environmental factors haven’t been considered in the previous study.Considering this factor,the mathematical model of economic insulation thickness of the buried hot oil pipelines is built in this paper,which is solved by the golden section method while considering the costs of investment,operation,environment,the time value of money.The environmental cost is determined according to the pollutant discharge calculated through relating heat loss of the pipelines to the air emission while building the model.The results primarily showed that the most saving fuel is natural gas,followed by LPG,fuel oil,and coal.The fuel consumption for identical insulation thickness is in the order:coal,fuel oil,LPG,and natural gas.When taking the environmental costs into account,the thicker the economic insulation layer is,the higher cost it will be.Meanwhile,the more pollutant discharge,the thicker the economic insulation layer will be.

Vertical Upheaval Buckling of Submarine Buried Heated Pipelines with Initial Imperfection

In this paper,a theoretical solution of vertical buckling is proposed with regard to the typical initial imperfection cases of submarine pipelines.Analytical tools are applied to predicting the occurrence and consequence of inservice buckling of a buried heated pipeline in Bohai Gulf.An evaluation is performed to ensure the pipeline structural integrity during operation under loading conditions.Different protection measures are proposed and their validities are analyzed.Analyses show that for the same magnitude of initial imperfection,the upheaval buckling of pipeline with isolated prop model is the most likely to occur.The empathetic model represents a special sub-case of continuous prop model,and the calculated buckle temperature is between the first stage and the second stage of post-upheaval buckling of continuous prop model.And the larger the initial imperfection,the less the axial force required for the upheaval buckling.Meanwhile,it can be seen that a peak point appears on the curves of temperature difference against buckling amplitude for small initial imperfection.Besides,trenching-burial is one kind of protection measures preventing the pipeline from thermal upheaval.The covered depth-to-diameter ratio depends on the design conditions and subsoil properties.For the given pipeline in this paper,the covered depth-to-diameter ratio is recommended to be 5.

Undersea Buried Pipeline Reconstruction Based on the Level Set and Inverse Multiquadric Regularization Method

The electric inversion technique reconstructs the subsurface medium distribution from acquired data.On the basis of electric inversion,objects buried under the earth or seabed,such as pipelines and unexploded ordnance,are detected and located in a contactless manner.However,the process of accurately reconstructing the shape of the target object is challenging because electric inversion is a nonlinear and ill-posed problem.In this work,we present an inverse multiquadric(IMQ)regularization method based on the level set function for reconstructing buried pipelines.In the case of locating underwater objects,the unknown inversion area is split into two parts,the background and the pipeline with known conductivity.The geometry of the pipeline is represented based on the level set function for achieving a noiseless inversion image.To obtain a binary image,the IMQ is used as the regularization term,which‘pushes’the level set function away from 0.We also provide an appropriate method to select the bandwidth and regularization parameters for the IMQ regularization term,resulting in reconstructed images with sharp edges.The simulation results and analysis show that the proposed method performs better than classical inversion methods.

Potential Calculation on the Oil-Gas Pipeline with Geosynthetic Clay Liners Based on BEM

Put geosynthetic clay liners around underground oil-gas pipelines can reduce the potential damage to environment but it will also affect the distribution of cathodic protection current. Geosynthetic clay liners can be regarded as anisotropic soil structure and the potential distribution on the pipeline between two adjacent cathodic protection stations was calculated based on boundary element method (BEM). The calculation results indicate that potential distribution on the pipeline with geosynthetic clay liner is lower than before. A 1500 m built pipeline with geosynthetic clay liners was selected to be calculated and to perform field test, which shows that the calculation results tally well with the field test results and the validity of the arithmetic in this paper was verified.

Sensitivity Analysis of Buried Jointed Pipelines Subjected to Earthquake Waves

In this study, a number of nonlinear time-history dynamic analyses are conducted on a part of Tehran water distribution network to investigate its functionality during transient large ground motions. The network is of 950-meter length, consisting of ductile iron pipes segments of 6-meter length. Pipes are modeled using beam elements and springs characterize the connections. Considering the time lag between support inputs, and the nonlinear soil-pipe interaction, by scaling the amplitude of the Tab as earthquake record, incremental dynamic analysis is carried out on the network in two orthogonal directions and the sensitivity of the network response is examined. Furthermore, the effects of variations in soil damping and soil spring stiffness are also studied in the network analysis. Finally the effect of changes in angle between incoming wave and pipeline is considered on a simplified network. Results show that the points other than critical ones at network intersections remain almost intact and when the angle of incidence is 30 degrees the stress and rotation peak.

Finite Element Structural Analysis of Buried Pipelines

This document uses previous results (which we call the first stage), for the development of a computer model based on finite elements under the FEAP programmer, to carry out a structural analysis of a pipeline. For this purpose, we used environmental variables that we believe influence the failure of buried pipelines such as the internal pressure of fluid, the type of support used, the temperature at which the pipelines work, the type of soil and the stiffness of the soil acting on it. Once the model was finalized, analyses were made with each of the variables separately and combined to observe the behavior of the pipeline, finding the most unfavorable case that indicates the main causes that led to its failure.

The Analysis and Comparison of All Kinds of Buried Pipeline Model Based on Seismic Effect

The problem of seismic response of buried pipeline aimed at the interaction of soil around the pipeline and the complicated calculation model was considered, and the various simplified finite element model was calculated, and it was analyzed. Firstly, the ADINA finite element analysis software was used. The four nodes in shell unit were used by tube. The spring unit was used by soil spring. The analysis model of buried pipeline finite element numerical based on tension and compression spring was established. Seismic wave was input. The response to the simple boundary, viscoelastic boundary earthquake were calculated and analyzed by the finite element numerical simulation. The pipeline’s earthquake ground motion response was obtained, and was compared with the real soil model, and the most suitable simplified calculation model for numerical analysis of buried pipeline was found, which was the numerical analysis model of buried pipeline pressure spring tension finite element based on the viscoelastic boundary, and the theory basis for the seismic design of pipeline was provided.