Study on the Enhancement Effect of Dielectric Barrier Discharge on the Premixed Methane/Oxygen/Helium Flame Velocity

Recently,plasma-assisted combustion has become a potentially applicable technology in many combustion scenarios.In this paper,a dielectric barrier discharge（DBD） plasma generator is designed to explore the effect of plasma on the CH4 oxidation process,and several properties of combustion are considered.First,in the presence or absence of plasma discharge,physical appearance of the flame is examined and analyzed.Second,the flame propagation velocity is calculated by the flame front extracted from the imaging data with the Bunsen burner method.Finally,the main molecular components and their intensity variation in the flame and the plasma zones are identified with an emission spectrograph to analyze the effect of active species on the combustion process.We also discuss the possible kinetic regime of plasma-assisted combustion.Experimental results imply that plasma discharge applied to the premixed CH_4/O_2/He mixture significantly raises the flame speed with equivalence ratios ranging from 0.85 to 1.10,with the flame speed improved by 17%to 35%.It can be seen that plasma can improve methane oxidation efficiency in the premixed fuel/oxidizer,especially at a low equivalence ratio.

Flame Retardant Finishing of Poly(ethylene terephthalate) Fabric with a Carbon Source Containing DOPO Derivative

9, 10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide( DOPO)-based flame retardant( DOPO-DOPC) which contains carbon source was used to improve the flame retardancy of poly( ethylene terephthalate)( PET) fabrics. The prepared DOPODOPC dispersion was applied onto PET fabrics via two kinds of processes,thermosol process and exhaustion process,and in the later using it alone or together with disperse dyes. The flame retardancy of PET fabrics was determined by limiting oxygen index( LOI) and vertical burning test. The results showed that DOPODOPC could obviously improve the flame retardancy of PET fabrics.The PET fabric treated by 60 g/L DOPO-DOPC dispersion via exhaustion process achieved an LOI value of 32. 3%,for example.The flame retardancy and dyeing performances showed that DOPODOPC dispersion could be used together with a part of disperse dyes in one bath. The thermal stability of DOPO-DOPC and the treated PET fabrics were investigated by thermogravimetric analysis( TGA). And the flame retardant mechanism of DOPO-DOPC treated PET fabrics was further investigated by pyrolysis-gas chromatography/mass spectrometry( Py-GC/MS), Fourier transform infrared spectroscopy( FTIR) and scanning electron microscopy( SEM).

Flame Burn Injury in Yichang of China:the Trends,Complications,and Risk Factor Analysis

Background A flame burn is an injury of body tissues,including respiratory tract damage,due to exposure to a flame or its dense smoke.Flame burns cause some of the most physically and psychologically devastating forms of trauma.Compared to scald burns,flame burn patients have a higher mortality rate and a higher frequency of multiorgan failure.The purpose of this research was to investigate the trends,complications,and mortality risk factors of flame burns at the Department of Plastic and Burn Surgery(DPBS)of the People’s Hospital of China Three Gorges University(PHCTGU).Methods A retrospective analysis of 48 flame burn patients—accounting for 8.3%of the 576 burn victims admitted for burns at the PHCTGU from February 1,2010,to September 30,2019—was performed after collecting information from the Burns Registry of the said hospital.Results The proportion of patients with flame burns was 8.3%(n=48).The mean total body surface area(TBSA)affected was 27.6%.The mean duration of hospitalization was 32.5 days.The etiologies of the flame burns were as follows:gas explosions(21,43.8%),ethanol(8,16.7%),charcoal fire(7,14.6%),petrol explosions(4,8.3%),wooden houses(4,8.3%),and others,including dust,cigarette lighter,and burning incense,accounting for 8.3%of cases(4).Finally,42(87.5%)patients were treated and discharged,and 6(12.5%)patients died.Complications included scarring in 38(90.5%)patients,severe scar contractures on different parts of the body in 25(60.0%)patients,scar ulcer in 6(14.3%)patients,keloids in 3(7.1%)patients,and scar cancer in 1(2.4%)patient.Multiple complications occurred in the same patient.The only risk factor for mortality that was identified was TBSA(P=0.043).Conclusions Our study revealed that a small population(8.3%)was injured by flame burns,but 6 deaths were recorded.Society must continually enhance safeguard procedures to flames and strengthen education to protect life and avoid severe complications.

The flame retardancy of alginate/flame retardant viscose fibers investigated by vertical burning test and cone calorimeter

In this research, the flame retardancy of neat alginate fiber, flame retardant viscose fiber （FRV） and alginate/FRV （50/50） blending fibers were investigated by vertical burning and cone calorimeter tests. The vertical burning test showed that the afterflame time of alginate fiber was 0 s, but alginate presented serious smoldering behavior with the afterglow time of 605 s and damaged length of 85 mm, while the afterglow time of FRV was 0 s. When the FRV was incorporated into alginate with the weight ratio of 50/ 50, the afterglow time and damaged length were significantly reduced to 85 s and 35 mm, indicating the smoldering of alginate can be effectively decreased. The morphology and chemical structure of the alginate residual demonstrated that it was seriously destroyed during smoldering process, which was ascribed to its relative low initial thermal degradation temperature. Based on the thermal properties analysis, alginate and FRV fibers shared the concurrence of rapid degradation in the same temperature region of 250-300 ℃, through which, the compact and stable char formed by FRV can prevent the heat transmission and suppress the smoldering of alginate. Further, the cone calorimeter results demonstrated that the time to ignition （TTI） significantly increased and peak heat release rate （PHRR） decreased for alginate/FRV （50/50） compared with FRV. With this research, a new method to overcome the smoldering of alginate was proposed by blending with FRV

Micro-organic dust combustion considering particles thermal resistance

Organic dust flames deal with a field of science in which many complicated phenomena like pyrolysis or devolatization of solid particles and combustion of volatile particles take place. One-dimensional flame propagation in cloud of fuel mixture is analyzed in which flame structure is divided into three zones. The first zone is preheat zone in which rate of the chemical reaction is small and transfer phenomena play significant role in temperature and mass distributions. In this model, it is assumed that particles pyrolyze first to yield a gaseous fuel mixture. The second zone is reaction zone where convection and vaporization rates of the particles are small. The third zone is convection zone where diffusive terms are negligible in comparison of other terms. Non-zero Biot number is used in order to study effect of particles thermal resistance on flame characteristics. Also, effect of particle size on combustion of micro organic dust is investigated. According to obtained results, it is understood that both flame temperature and burning velocity decrease with rise in the Biot number and particle size.

An Efficient Halogen-free Flame Retardant for Polyethylene：Piperazine-modified Ammonium Polyphosphates with Different Structures

In this study, piperazine-modified ammonium polyphosphates（PA-APPs） with hierarchical structure were synthesized through ion exchange reaction. ^1H nuclear magnetic resonance（^1H-NMR）, Fourier transform infrared spectra（FTIR）, elemental analysis（EA）, and inductively coupled plasma atomic emission spectroscopy（ICP-AES） confirmed that the PA-APPs with different structures were prepared successfully. Then these flame retardants were used alone as monocomponent intumescent flame retardant for low-density polyethylene（LDPE）. Combustion tests demonstrated that the flameretardant efficiency of PA-APP containing about 7 wt% carbon（PA-APP_7） was significantly higher than that of the other PAAPPs with more or less carbon. The flame-retarded LDPE system with 30 wt% PA-APP_7 passed the UL-94 V-0 rating, and had the oxygen index（LOI） of 33.0%. Thermal analysis illustrated that the thermal decomposition behavior of PA-APP changed with incorporating different contents of PA. For all these PA-APPs, PA-APP_7 showed higher thermal stability than the other PA-APP flame retardants. All the experimental results proved that PA-APP_7 could reach the balance of an acid source, a blowing source, and a charring source as a mono-component intumescent flame retardant for LDPE. Further, it led to the formation of a compact intumescent char layer containing the structures of rich P―O―P, P―N―C, C=C, etc. during burning which in turn resulted in the excellent flame-retardant efficiency of PA-APP7.