We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump sourc...We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump source is a peak-power-selectable pulse-multiplied picosecond Yb fiber laser.The chirped pulses from a figure of eight-cavity modelocked fiber laser seed are narrowed to a duration of less than 50 ps using an FBG reflector and a circulator.The narrowed pulses are directed to pass through a pulse multiplier and to form pulse bunches,each of which is composed of 13 subpulses.The obtained pulse bunches are amplified by two-stage fiber pre-amplifiers:one-stage is core-pumped and the other is cladding-pumped.A fiberized acousto-optic modulator is inserted to control the pulse repetition rate(PRR) of the pulse bunches before they are power-amplified in the final amplifier stage with a large mode area(LMA) PM Yb-doped fiber.The maximum average powers from the final amplifier are 85 W,60 W,and 45 W,respectively,corresponding to the PRR of2.72 MHz,1.36 MHz,and 0.68 MHz.The amplified pulses are directed to pump an MgO:PPLN-based optical parametric oscillator(OPO).A maximum peak power at 3.45 μm is obtained approximately to be 8.4 kW.Detailed performance characteristics are presented.展开更多
We report a Yb-doped all-fiber laser system generating burst-mode pulses with high energy and high peak power at a GHz intra-burst repetition rate.To acquire the uniform burst envelope,a double-pre-compensation struct...We report a Yb-doped all-fiber laser system generating burst-mode pulses with high energy and high peak power at a GHz intra-burst repetition rate.To acquire the uniform burst envelope,a double-pre-compensation structure with an arbitrary waveform laser diode driver and an acoustic optical modulator is utilized for the first time.The synchronous pumping is utilized for the system to reduce the burst repetition rate to 100 Hz and suppress the amplified spontaneous emission effect.By adjusting the gain of every stage,uniform envelopes with different output energies can be easily obtained.The intra-burst repetition rate can be tuned from 0.5 to 10 GHz actively modulated by an electro-optic modulator.Optimized by timing control of eight channels of analog signal and amplified by seven stages of Yb-doped fiber amplifier,the pulse energy achieves 13.3 mJ at 0.5 ns intra-burst pulse duration,and the maximum peak power reaches approximately3.6 MW at 48 ps intra-burst pulse duration.To the best of our knowledge,for reported burst-mode all-fiber lasers,this is a record for output energy and peak power with nanosecond-level burst duration,and the widest tuning range of the intra-burst repetition rate.In particular,this flexibly tunable burst-mode laser system can be directly applied to generate high-power frequency-tunable microwaves.展开更多
Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch(PCSS)with a burst-mode fibre laser.The whole system is composed of a high-power linearly p...Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch(PCSS)with a burst-mode fibre laser.The whole system is composed of a high-power linearly polarized burst-mode pulsed fibre laser and a linear-state PCSS.To obtain a high-performance microwave signal,a desired envelope of burst is necessary and a pulse pre-compensation technique is adopted to avoid envelope distortion induced by the gain-saturation effect.Resulting from the technique,homogenous peak power distribution in each burst is ensured.The maximum energy of the laser burst pulse reaches 200μJ with a burst duration of 100 ns at the average power of 10 W,corresponding to a peak power of 4 kW.When the PCSS is illuminated by the burst-mode fibre laser,narrowband microwave generation with tuneable frequency(0.80-1.12 GHz)is obtained with a power up to 300 W.To the best of the authors’knowledge,it is the first demonstration of frequency-tuneable narrowband microwave generation based on a fibre laser.The high-power burst-mode fibre laser reported here has great potential for generating high-power arbitrary microwave signals for a great deal of applicable demands such as smart adaptive radar and intelligent high-power microwave systems.展开更多
We introduce a gated oscillator based on XONR/XOR cells and illustrate its working process. A halfrate BM-CDR circuit based on the proposed oscillator is designed, and the design is implemented in SMIC 0.13 μm CMOS t...We introduce a gated oscillator based on XONR/XOR cells and illustrate its working process. A halfrate BM-CDR circuit based on the proposed oscillator is designed, and the design is implemented in SMIC 0.13 μm CMOS technology occupying an area of 675 ×25 μm2. The measured results show that this circuit can recover clock and data from each 10 Gbit/s burst-mode data packet within 5 bits, and the recovered data pass eye-mask test defined in IEEE standard 802.3av.展开更多
针对水轮机调节系统簇发振荡的抑制问题,提出一种基于浸入与不变(immersion and invariance, I&I)原理的自适应反步滑模控制策略。首先,建立两时间尺度下的水轮机调节系统动力学模型,并分析系统的簇发振荡行为;其次,结合反步理论和...针对水轮机调节系统簇发振荡的抑制问题,提出一种基于浸入与不变(immersion and invariance, I&I)原理的自适应反步滑模控制策略。首先,建立两时间尺度下的水轮机调节系统动力学模型,并分析系统的簇发振荡行为;其次,结合反步理论和基于趋近律的滑模原理设计控制器,同时,对水轮机调节系统在运行过程受到的外部扰动,引入I&I理论对扰动估计误差建立流形,通过自适应律的选取保持其吸引与不变,并采用Lyapunov稳定性理论对所提控制方法进行收敛性证明;最后,对上述控制策略进行仿真验证。结果表明,该方法能有效抑制系统的簇发振荡现象,且具有较好的扰动跟踪精度。展开更多
在详细分析MOSFET输出电容对CLLLC谐振变换器运行原理和工作特性影响的基础上,针对MOSFET输出电容在续流阶段会产生振荡的问题,提出一种优化的参数设计方法,可在保持自然软开关特性的同时减轻振荡;针对由输出电容引起的变换器轻空载工...在详细分析MOSFET输出电容对CLLLC谐振变换器运行原理和工作特性影响的基础上,针对MOSFET输出电容在续流阶段会产生振荡的问题,提出一种优化的参数设计方法,可在保持自然软开关特性的同时减轻振荡;针对由输出电容引起的变换器轻空载工作时输出电压漂高的问题,采取电压滞环间歇模式控制,可有效将输出电压调节至额定值,同时降低变换器轻空载工作时的损耗;最后,搭建了一台1 k W、400 V/48 V的实验样机,实验结果证明了所提优化设计和控制策略的正确性和可行性。展开更多
基金supported by the National Natural Science Foundation of China(Grant No.61078015)the National Basic Research Program of China(Grant No.2011CB311803)
文摘We demonstrate a compact periodically poled MgO-doped lithium niobate(MgO:PPLN)-based optical parametric oscillator(OPO) quasi-synchronously pumped by a fiber laser system with burst-mode operation.The pump source is a peak-power-selectable pulse-multiplied picosecond Yb fiber laser.The chirped pulses from a figure of eight-cavity modelocked fiber laser seed are narrowed to a duration of less than 50 ps using an FBG reflector and a circulator.The narrowed pulses are directed to pass through a pulse multiplier and to form pulse bunches,each of which is composed of 13 subpulses.The obtained pulse bunches are amplified by two-stage fiber pre-amplifiers:one-stage is core-pumped and the other is cladding-pumped.A fiberized acousto-optic modulator is inserted to control the pulse repetition rate(PRR) of the pulse bunches before they are power-amplified in the final amplifier stage with a large mode area(LMA) PM Yb-doped fiber.The maximum average powers from the final amplifier are 85 W,60 W,and 45 W,respectively,corresponding to the PRR of2.72 MHz,1.36 MHz,and 0.68 MHz.The amplified pulses are directed to pump an MgO:PPLN-based optical parametric oscillator(OPO).A maximum peak power at 3.45 μm is obtained approximately to be 8.4 kW.Detailed performance characteristics are presented.
基金Supported by the Natural Science Foundation of Jiangsu Province ( BK2010411 ) and the National International Cooperation Project of China-Korea (2011DFA11310).
基金supported by the National Natural Science Foundation of China(No.62205374)the Research Funds of the State Key Laboratory of Pulsed Power Laser Technology,China(Nos.SKL2021KF07 and SKL2020ZR06)
文摘We report a Yb-doped all-fiber laser system generating burst-mode pulses with high energy and high peak power at a GHz intra-burst repetition rate.To acquire the uniform burst envelope,a double-pre-compensation structure with an arbitrary waveform laser diode driver and an acoustic optical modulator is utilized for the first time.The synchronous pumping is utilized for the system to reduce the burst repetition rate to 100 Hz and suppress the amplified spontaneous emission effect.By adjusting the gain of every stage,uniform envelopes with different output energies can be easily obtained.The intra-burst repetition rate can be tuned from 0.5 to 10 GHz actively modulated by an electro-optic modulator.Optimized by timing control of eight channels of analog signal and amplified by seven stages of Yb-doped fiber amplifier,the pulse energy achieves 13.3 mJ at 0.5 ns intra-burst pulse duration,and the maximum peak power reaches approximately3.6 MW at 48 ps intra-burst pulse duration.To the best of our knowledge,for reported burst-mode all-fiber lasers,this is a record for output energy and peak power with nanosecond-level burst duration,and the widest tuning range of the intra-burst repetition rate.In particular,this flexibly tunable burst-mode laser system can be directly applied to generate high-power frequency-tunable microwaves.
文摘Narrowband microwave generation with tuneable frequency is demonstrated by illuminating a photoconductive semiconductor switch(PCSS)with a burst-mode fibre laser.The whole system is composed of a high-power linearly polarized burst-mode pulsed fibre laser and a linear-state PCSS.To obtain a high-performance microwave signal,a desired envelope of burst is necessary and a pulse pre-compensation technique is adopted to avoid envelope distortion induced by the gain-saturation effect.Resulting from the technique,homogenous peak power distribution in each burst is ensured.The maximum energy of the laser burst pulse reaches 200μJ with a burst duration of 100 ns at the average power of 10 W,corresponding to a peak power of 4 kW.When the PCSS is illuminated by the burst-mode fibre laser,narrowband microwave generation with tuneable frequency(0.80-1.12 GHz)is obtained with a power up to 300 W.To the best of the authors’knowledge,it is the first demonstration of frequency-tuneable narrowband microwave generation based on a fibre laser.The high-power burst-mode fibre laser reported here has great potential for generating high-power arbitrary microwave signals for a great deal of applicable demands such as smart adaptive radar and intelligent high-power microwave systems.
基金supported by the Key Technology Research and Development Program of Jiangsu Province,Industry Part,China(No.BE2008128)
文摘We introduce a gated oscillator based on XONR/XOR cells and illustrate its working process. A halfrate BM-CDR circuit based on the proposed oscillator is designed, and the design is implemented in SMIC 0.13 μm CMOS technology occupying an area of 675 ×25 μm2. The measured results show that this circuit can recover clock and data from each 10 Gbit/s burst-mode data packet within 5 bits, and the recovered data pass eye-mask test defined in IEEE standard 802.3av.
文摘针对水轮机调节系统簇发振荡的抑制问题,提出一种基于浸入与不变(immersion and invariance, I&I)原理的自适应反步滑模控制策略。首先,建立两时间尺度下的水轮机调节系统动力学模型,并分析系统的簇发振荡行为;其次,结合反步理论和基于趋近律的滑模原理设计控制器,同时,对水轮机调节系统在运行过程受到的外部扰动,引入I&I理论对扰动估计误差建立流形,通过自适应律的选取保持其吸引与不变,并采用Lyapunov稳定性理论对所提控制方法进行收敛性证明;最后,对上述控制策略进行仿真验证。结果表明,该方法能有效抑制系统的簇发振荡现象,且具有较好的扰动跟踪精度。
文摘在详细分析MOSFET输出电容对CLLLC谐振变换器运行原理和工作特性影响的基础上,针对MOSFET输出电容在续流阶段会产生振荡的问题,提出一种优化的参数设计方法,可在保持自然软开关特性的同时减轻振荡;针对由输出电容引起的变换器轻空载工作时输出电压漂高的问题,采取电压滞环间歇模式控制,可有效将输出电压调节至额定值,同时降低变换器轻空载工作时的损耗;最后,搭建了一台1 k W、400 V/48 V的实验样机,实验结果证明了所提优化设计和控制策略的正确性和可行性。