Dynamic response of honeycomb-FGS shells subjected to the dynamic loading using non-polynomial higher-order IGA

The main goal of this study is to use higher-order isogeometric analysis(IGA)to study the dynamic response of sandwich shells with an auxetic honeycomb core and two different functionally graded materials(FGM)skin layers(namely honeycomb-FGS shells)subjected to dynamic loading.Touratier's non-polynomial higher-order shear deformation theory(HSDT)is used due to its simplicity and performance.The governing equation is derived from Hamilton's principle.After verifying the present approach,the effect of input parameters on the dynamic response of honeycomb-FGS shells is carried out in detail.

Kentish Plover(Charadrius alexandrinus) and Little Tern(Sternula albifrons) prefer shells for nesting:A field experiment

Shorebird populations are declining worldwide,mainly due to human disturbances and loss of coastal wetlands.However,supratidal habitats as saltpans could play a role in buffering human impact.Saltpans have shown to be important as feeding or breeding sites of some shorebird species.A potential conservation strategy to increase shorebird populations in saltpans is to manipulate the cues that birds use to select optimal breeding habitat.Here it is hypothesized that shorebirds are attracted to bivalve shells due to the advantages they offer.Following this hypothesis,we supplemented a restored saltpan in 2019 and 2021 with bivalve shells,expecting an increase in the number of breeding birds’ nests.More than 75% of Kentish Plover(Charadrius alexandrinus) and Little Tern(Sternula albifrons) nests were found in patches with shells in both years.The best model for both species indicates that the presence of shells is the factor that most correlates with the location of nests.The probability of choosing one place over another to settle their nest increases in areas with an abundance of shells,double in the case of the Kentish Plover and triple in the case of the Little Tern.The result of this study may constitute a valuable tool for attracting birds to restored saltpans and could contribute to the success of expensive restoration projects where time is usually a constraint.

Simple and High-Yield Synthesis of a Thinner Layer of Graphenic Carbon from Coconut Shells

Biomass has become of recent interest as a raw material for‘green’graphenic carbon(GC)since it promotes an environmentally friendly approach.Here,we investigate a single pyrolysis route to synthesize GC from coconut shells which provides a simple method and can produce a high yield,thus being convenient for large-scale pro-duction.The pyrolysis involves a stepped holding process at 350℃ for 1 h and at 650℃ or 900℃ for 3 h.The GC sample resulted at the 900℃ pyrolysis has a thinner sheet,a less porous structure,a higher C/O ratio,and an enhanced electrical conductivity than those pyrolyzed at 650℃.The addition of Na3PO4 catalyst has no signifi-cant effects on the GC structures obtained by this route.The single pyrolysis route generates thinner GC sheets compared to the two-step heat treatment followed by the liquid phase exfoliation(LPE)procedure.Nevertheless,the latter method offers a formation of clean samples with a porous or holey feature which has potential for advanced energy-storage applications.

Full-Scale Isogeometric Topology Optimization of Cellular Structures Based on Kirchhoff-Love Shells

Cellular thin-shell structures are widely applied in ultralightweight designs due to their high bearing capacity and strength-to-weight ratio.In this paper,a full-scale isogeometric topology optimization(ITO)method based on Kirchhoff-Love shells for designing cellular tshin-shell structures with excellent damage tolerance ability is proposed.This method utilizes high-order continuous nonuniform rational B-splines(NURBS)as basis functions for Kirchhoff-Love shell elements.The geometric and analysis models of thin shells are unified by isogeometric analysis(IGA)to avoid geometric approximation error and improve computational accuracy.The topological configurations of thin-shell structures are described by constructing the effective density field on the controlmesh.Local volume constraints are imposed in the proximity of each control point to obtain bone-like cellular structures.To facilitate numerical implementation,the p-norm function is used to aggregate local volume constraints into an equivalent global constraint.Several numerical examples are provided to demonstrate the effectiveness of the proposed method.After simulation and comparative analysis,the results indicate that the cellular thin-shell structures optimized by the proposed method exhibit great load-carrying behavior and high damage robustness.

Transient responses of double-curved sandwich two-layer shells resting on Kerr's foundations with laminated three-phase polymer/GNP/fiber surface and auxetic honeycomb core subjected to the blast load

This work uses refined first-order shear theory to analyze the free vibration and transient responses of double-curved sandwich two-layer shells made of auxetic honeycomb core and laminated three-phase polymer/GNP/fiber surface subjected to the blast load.Each of the two layers that make up the double-curved shell structure is made up of an auxetic honeycomb core and two laminated sheets of three-phase polymer/GNP/fiber.The exterior is supported by a Kerr elastic foundation with three characteristics.The key innovation of the proposed theory is that the transverse shear stresses are zero at two free surfaces of each layer.In contrast to previous first-order shear deformation theories,no shear correction factor is required.Navier's exact solution was used to treat the double-curved shell problem with a single title boundary,while the finite element technique and an eight-node quadrilateral were used to address the other boundary requirements.To ensure the accuracy of these results,a thorough comparison technique is employed in conjunction with credible statements.The problem model's edge cases allow for this kind of analysis.The study's findings may be used in the post-construction evaluation of military and civil works structures for their ability to sustain explosive loads.In addition,this is also an important basis for the calculation and design of shell structures made of smart materials when subjected to shock waves or explosive loads.

Study on Adsorption Removal of Polycyclic Aromatic Hydrocarbons by Modified Mussel Shells

Polycyclic aromatic hydrocarbons(PAHs)are typical persistent organic pollutants(POPs)that are commonly found in the environment.They are carcinogenic,teratogenic,mutagenic and biodegradable obviously.In this paper,the modified mussel shells were used to adsorb and remove anthracene.The results show that the adsorption removal rate of the mussel shells was higher after calcination at 600℃.5%H_(3)PO_(4) solution was more suitable for shell treatment than 3 mol/L ZnCl_(2) solution.As the dosage of the modified shells was 0.5 g/L,the adsorption reached a stable state,and the removal rate of PAHs was about 69.44%;the adsorption efficiency rose with the increase of time.It can be seen that as a new and cheap biological adsorbent,the modified shells can be used to remove PAHs from wastewater.

Performance Analysis of Plant Shells/PVC Composites under Corrosion and Aging Conditions

To make full use of plant shellfibers(rice husk,walnut shell,chestnut shell),three kinds of wood-plastic com-posites of plant shellfibers and polyvinyl chloride(PVC)were prepared.X-ray diffraction analysis was carried out on three kinds of plant shellfibers to test their crystallinity.The aging process of the composites was conducted under 2 different conditions.One was artificial seawater immersion and xenon lamp irradiation,and the other one was deionized water spray and xenon lamp irradiation.The mechanical properties(tensile strength,flexural strength,impact strength),changes in color,water absorption,Fourier transform infrared spectroscopy(FTIR),and microstructures of the composites before and after the two aging experiments were analyzed.The results showed that the chestnut shell had the highest crystallinity,which was 42%.The chestnut shell/PVC composites had the strongest interface bonding,the least internal defects,and the best general mechanical properties among the three composites.Its tensile strength,bending strength and impact strength were 23.81 MPa,34.12 MPa,and 4.32 KJ·m^(-2),respectively.Comparing the two aging conditions,artificial seawater immersion and xenon lamp irradiation destroyed the quality of the combination of plant shellfibers and PVC,making the internal defects of the composites increase.This made the water absorption ability and changes in the color of the composites more obvious and led to a great decrease in the mechanical properties.The general mechanical properties of the chestnut shell/PVC composites were the best,but their water absorption ability changed more obviously.

基于SHELL模型的航空货物运输安全问题研究

文章阐述了SHELL 模型的基本理论,分析了航空货物运输的基本流程及常见安全问题,应用SHELL模型重点探究航空货物运输中人与硬件(L-H)、人与软件(L-S)、人与环境(L-E)及人与人(L-L)的要素特征与关系界面,梳理引发安全问题导致不安全事件的原因,提出缩小关系界面空隙、提高关系匹配度的措施,保障航空货物运输安全,促进航空货运持续稳定发展。

基于邻域K-shell分布的关键节点识别方法

复杂网络中关键节点的精准识别对于网络结构稳定和信息传播起着至关重要的作用。传统K-shell方法仅通过节点在网络中所处位置对节点的重要性进行评估,导致区分度不高。基于此,综合考虑了节点的全局信息和局部信息对节点重要性的影响,提出一种基于邻域K-shell分布的关键节点识别方法。该方法通过节点邻域Ks值定义节点的熵,从而反映邻居节点的K-shell分布特征。通过11个网络数据集上的仿真实验,验证了所提方法能够更准确地识别并区分复杂网络中的关键节点。

基于Shell脚本的KVM虚拟化技术应用

虚拟化技术是当前计算机信息技术中一个新的变革,其中开源的虚拟化技术(Kernel-Based Virtual Machines,KVM)更是以稳定、高效、经济而著称,为科学研究、工程仿真等领域提供了强大的计算能力。文章以某高职院校虚拟化应用为实例,探讨在普通高职院校的虚拟化技术应用管理中使用Shell脚本进行智能化管理,并展示其技术用于云平台辅助管理的优势,为用户轻便智能管理KVM虚拟化技术应用提供参考。

改进K-shell算法的城市道路网关键交叉口识别

交叉口重要性不仅与自身属性相关,还受相邻路段属性的影响,针对城市道路网中关键交叉口识别方法准确率不足的问题,提出一种考虑城市道路网特性的改进K-shell算法。即在传统K-shell算法基础上,综合考虑交叉口及其相邻路段的结构特性与交通特性,提出交叉口重要度的概念,利用CRITIC法确定交叉口重要度中相关指标的权重系数,对城市道路网中的交叉口进行重要性排序。以哈尔滨市二环内道路网为例,构建级联失效模型,分析随着失效交叉口比例的增加,不同排序方法下的网络效率、网络最大连通子图比率、故障节点比率的波动情况,结果表明,改进K-shell算法能够更加有效地识别城市道路网关键交叉口。

Three Dimensional Coupling between Elastic and Thermal Fields in the Static Analysis of Multilayered Composite Shells

This new work aims to develop a full coupled thermomechanical method including both the temperature profile and displacements as primary unknowns of the model.This generic full coupled 3D exact shell model permits the thermal stress investigation of laminated isotropic,composite and sandwich structures.Cylindrical and spherical panels,cylinders and plates are analyzed in orthogonal mixed curved reference coordinates.The 3D equilibrium relations and the 3D Fourier heat conduction equation for spherical shells are coupled and they trivially can be simplified in those for plates and cylindrical panels.The exponential matrix methodology is used to find the solutions of a full coupled model based on coupled differential relations with respect to the thickness coordinate.The analytical solution is based on theories of simply supported edges and harmonic relations for displacement components and sovra-temperature.The sovra-temperature magnitudes are directly applied at the outer faces through static state hypotheses.As a consequence,the sovra-temperature description is assumed to be an unknown variable of themodel and it is calculated in the sameway as the three displacements.The final systemis based on a set of coupled homogeneous differential relations of second order in the thickness coordinate.This system is reduced in a first order differential relation system by redoubling the number of unknowns.Therefore,the exponential matrix methodology is applied to calculate the solution.The temperature field effects are evaluated in the static investigation of shells and plates in terms of displacement and stress components.After an appropriate preliminary validation,new benchmarks are discussed for several thickness ratios,geometrical data,lamination sequences,materials and sovra-temperature values imposed at the outer faces.Results make evident the accordance between the uncoupled thermo-mechanical model and this new full coupled thermo-mechanical model without the need to separately solve the Fourier heat conduction relation.Both effects connected with the thickness layer and the related embedded materials are included in the conducted thermal stress analysis.

Nonlinear free vibration of piezoelectric semiconductor doubly-curved shells based on nonlinear drift-diffusion model

In this paper, the nonlinear free vibration behaviors of the piezoelectric semiconductor(PS) doubly-curved shell resting on the Pasternak foundation are studied within the framework of the nonlinear drift-diffusion(NLDD) model and the first-order shear deformation theory. The nonlinear constitutive relations are presented, and the strain energy, kinetic energy, and virtual work of the PS doubly-curved shell are derived.Based on Hamilton's principle as well as the condition of charge continuity, the nonlinear governing equations are achieved, and then these equations are solved by means of an efficient iteration method. Several numerical examples are given to show the effect of the nonlinear drift current, elastic foundation parameters as well as geometric parameters on the nonlinear vibration frequency, and the damping characteristic of the PS doublycurved shell. The main innovations of the manuscript are that the difference between the linearized drift-diffusion(LDD) model and the NLDD model is revealed, and an effective method is proposed to select a proper initial electron concentration for the LDD model.

Mechanical Performance of Bio-inspired Bidirectional Corrugated Sandwich Pressure Shell Under External Hydrostatic Pressure

This paper aims to enhance the compression capacity of underwater cylindrical shells by adopting the corrugated sandwich structure of cuttlebone.The cuttlebone suffers uniaxial external compression,while underwater cylindrical shells are in a biaxial compressive stress state.To suit the biaxial compressive stress state,a novel bidirectional corrugated sandwich structure is proposed to improve the bearing capacity of cylindrical shells.The static and buckling analysis for the sandwich shell and the unstiffened cylindrical shell with the same volume-weight ratio are studied by numerical simulation.It is indicated that the proposed sandwich shell can effectively reduce the ratio between circumferential and axial stress from 2 to 1.25 and improve the critical buckling load by about 1.63 times.Numerical simulation shows that optimizing and adjusting the structural parameters could significantly improve the advantage of the sandwich shell.Then,the hydrostatic pressure tests for shell models fabricated by 3D printing are carried out.According to the experimental results,the overall failure position of the sandwich shell is at the center part of the sandwich shell.It has been found the average critical load of the proposed sandwich shell models exceeds two times that of the unstiffened shell models.Hence,the proposed bio-inspired bidirectional corrugated sandwich structure can significantly enhance the pressure resistance capability of cylindrical shells.

Phylogenetic context of a deep-sea clam(Bivalvia:Vesicomyidae) revealed by DNA from 1 500-year-old shells

DEAR EDITOR,Ancient DNA(a DNA) from mollusc shells is considered a potential archive of historical biodiversity and evolution.However, such information is currently lacking for mollusc shells from the deep ocean, especially those from acidic chemosynthetic environments theoretically unsuitable for longterm DNA preservation. Here, we report on the recovery of mitochondrial and nuclear gene markers by Illumina sequencing of a DNA from three shells of Archivesica nanshaensis – a hydrocarbon-seep vesicomyid clam previously known only from a pair of empty shells collected at a depth of 2626 m in the South China Sea.

Characterization of Unsaturated Polyester Filled with Waste Coconut Shells, Walnut Shells, and Carbon Fibers

This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).

Microstructural Dependence of Friction and Wear Behavior in Biological Shells

As an essential renewable mineral resource,mollusk shells can be used as handicrafts,building materials,adsor-bents,etc.However,there are few reports on the wear resistance of their structures.The Vicker’s hardness and friction,and wear resistance of different microstructures in mollusk shells were comparatively studied in the pre-sent work.The hardness of prismatic structures is lower than that of cross-lamellar and nacreous structures.How-ever,the experimental results of sliding tests indicate that the prismatic structure exhibits the best anti-wear ability compared with foliated,crossed-lamellar,and nacreous structures.The anti-wear and hardness do not present a positive correlation,as the wear resistance properties of different microstructures in mollusk shells are governed jointly by organic matrix,structural arrangement,and basic building block actions.The present researchfindings are expected to provide fundamental insight into the design of renewable bionic materials with high wear resistance.

基于Python和Shell的《Linux实训项目自测平台》软件设计

近年来,Linux操作系统在各国不断地发展与推广,高等院校开设的Linux操作系统课程也越来越受到重视。通过对软件界面设计及在Linux操作系统中检测实训项目的几种常用方式进行分析和研究,给操作系统课程教学提供一种教学思路,同时对Linux教学辅助软件开发者提供一些借鉴和参考。

Analytical determination of non-local parameter value to investigate the axial buckling of nanoshells affected by the passing nanofluids and their velocities considering various modified cylindrical shell theories

We analytically determine the nonlocal parameter value to achieve a more accurate axial-buckling response of carbon nanoshells conveying nanofluids. To this end, the four plates/shells' classical theories of Love, Fl ¨ugge, Donnell, and Sanders are generalized using Eringen's nonlocal elasticity theory. By combining these theories in cylindrical coordinates,a modified motion equation is presented to investigate the buckling behavior of the nanofluid-nanostructure-interaction problem. Herein, in addition to the small-scale effect of the structure and the passing fluid on the critical buckling strain,we discuss the effects of nanoflow velocity, fluid density(nano-liquid/nano-gas), half-wave numbers, aspect ratio, and nanoshell flexural rigidity. The analytical approach is used to discretize and solve the obtained relations to study the mentioned cases.

Numerical study on the dynamic fracture of explosively driven cylindrical shells

Research on the expansion and fracture of explosively driven metal shells has been a key issue in weapon development and structural protection.It is important to study and predict the failure mode,fracture mechanism,and fragment distribution characteristics of explosively driven metal shells.In this study,we used the finite element-smoothed particle hydrodynamics(FE-SPH)adaptive method and the fluid-structure interaction method to perform a three-dimensional numerical simulation of the expansion and fracture of a metal cylindrical shell.Our method combined the advantages of the FEM and SPH,avoiding system mass loss,energy loss,and element distortion;in addition,the proposed method had a good simulation effect on the interaction between detonation waves and the cylindrical shell.The simulated detonation wave propagation,shell damage morphology,and fragment velocity distribution were in good agreement with theoretical and experimental results.We divided the fragments into three regions based on their shape characteristics.We analyzed the failure mode and formation process of fragments in different regions.The numerical results reproduced the phenomenon in which cracks initiated from the inner surface and extended to the outer surface of the cylindrical shell along the 45°or 135°shear direction.In addition,fragments composed of elements are identified,and the mass and characteristic lengths of typical fragments at a stable time are provided.Furthermore,the mass and size distribution characteristics of the fragments were explored,and the variation in the fitting results of the classical distribution function under different explosion pressures was examined.Finally,based on mathematical derivation,the distribution formula of fragment velocity was improved.The improved formula provided higher accuracy and could be used to analyze any metal cylindrical shells with different length-to-diameter ratios.