期刊文献+
共找到1,707篇文章
< 1 2 86 >
每页显示 20 50 100
Type Synthesis of Self-Alignment Parallel Ankle Rehabilitation Robot with Suitable Passive Degrees of Freedom
1
作者 Ya Liu Wenjuan Lu +3 位作者 Dabao Fan Weijian Tan Bo Hu Daxing Zeng 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2024年第1期160-175,共16页
The current parallel ankle rehabilitation robot(ARR)suffers from the problem of difficult real-time alignment of the human-robot joint center of rotation,which may lead to secondary injuries to the patient.This study ... The current parallel ankle rehabilitation robot(ARR)suffers from the problem of difficult real-time alignment of the human-robot joint center of rotation,which may lead to secondary injuries to the patient.This study investigates type synthesis of a parallel self-alignment ankle rehabilitation robot(PSAARR)based on the kinematic characteristics of ankle joint rotation center drift from the perspective of introducing"suitable passive degrees of freedom(DOF)"with a suitable number and form.First,the self-alignment principle of parallel ARR was proposed by deriving conditions for transforming a human-robot closed chain(HRCC)formed by an ARR and human body into a kinematic suitable constrained system and introducing conditions of"decoupled"and"less limb".Second,the relationship between the self-alignment principle and actuation wrenches(twists)of PSAARR was analyzed with the velocity Jacobian matrix as a"bridge".Subsequently,the type synthesis conditions of PSAARR were proposed.Third,a PSAARR synthesis method was proposed based on the screw theory and type of PSAARR synthesis conducted.Finally,an HRCC kinematic model was established to verify the self-alignment capability of the PSAARR.In this study,93 types of PSAARR limb structures were synthesized and the self-alignment capability of a human-robot joint axis was verified through kinematic analysis,which provides a theoretical basis for the design of such an ARR. 展开更多
关键词 Ankle rehabilitation robot SELF-ALIGNMENT parallel mechanism Type synthesis Screw theory
下载PDF
A Closed-Loop Dynamic Controller for Active Vibration Isolation Working on A Parallel Wheel-Legged Robot
2
作者 Fei Guo Shoukun Wang +1 位作者 Daohe Liu Junzheng Wang 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2023年第3期147-160,共14页
Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.How... Serving the Stewart mechanism as a wheel-legged structure,the most outstanding superiority of the proposed wheel-legged hybrid robot(WLHR)is the active vibration isolation function during rolling on rugged terrain.However,it is difficult to obtain its precise dynamic model,because of the nonlinearity and uncertainty of the heavy robot.This paper presents a dynamic control framework with a decentralized structure for single wheel-leg,position tracking based on model predictive control(MPC)and adaptive impedance module from inside to outside.Through the Newton-Euler dynamic model of the Stewart mechanism,the controller first creates a predictive model by combining Newton-Raphson iteration of forward kinematic and inverse kinematic calculation of Stewart.The actuating force naturally enables each strut to stretch and retract,thereby realizing six degrees-of-freedom(6-DOFs)position-tracking for Stewart wheel-leg.The adaptive impedance control in the outermost loop adjusts environmental impedance parameters by current position and force feedback of wheel-leg along Z-axis.This adjustment allows the robot to adequately control the desired support force tracking,isolating the robot body from vibration that is generated from unknown terrain.The availability of the proposed control methodology on a physical prototype is demonstrated by tracking a Bezier curve and active vibration isolation while the robot is rolling on decelerate strips.By comparing the proportional and integral(PI)and constant impedance controllers,better performance of the proposed algorithm was operated and evaluated through displacement and force sensors internally-installed in each cylinder,as well as an inertial measurement unit(IMU)mounted on the robot body.The proposed algorithm structure significantly enhances the control accuracy and vibration isolation capacity of parallel wheel-legged robot. 展开更多
关键词 Wheel-legged hybrid robot Adaptive impedance control Model predictive control Stewart mechanism Vibration isolation parallel robot
下载PDF
Algebraic Method‑Based Point‑to‑Point Trajectory Planning of an Under‑Constrained Cable‑Suspended Parallel Robot with Variable Angle and Height Cable Mast 被引量:11
3
作者 Tao Zhao Bin Zi +1 位作者 Sen Qian Jiahao Zhao 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2020年第4期45-62,共18页
To avoid impacts and vibrations during the processes of acceleration and deceleration while possessing flexible working ways for cable-suspended parallel robots(CSPRs),point-to-point trajectory planning demands an und... To avoid impacts and vibrations during the processes of acceleration and deceleration while possessing flexible working ways for cable-suspended parallel robots(CSPRs),point-to-point trajectory planning demands an under-constrained cable-suspended parallel robot(UCPR)with variable angle and height cable mast as described in this paper.The end-effector of the UCPR with three cables can achieve three translational degrees of freedom(DOFs).The inverse kinematic and dynamic modeling of the UCPR considering the angle and height of cable mast are completed.The motion trajectory of the end-effector comprising six segments is given.The connection points of the trajectory segments(except for point P3 in the X direction)are devised to have zero instantaneous velocities,which ensure that the acceleration has continuity and the planned acceleration curve achieves smooth transition.The trajectory is respectively planned using three algebraic methods,including fifth degree polynomial,cycloid trajectory,and double-S velocity curve.The results indicate that the trajectory planned by fifth degree polynomial method is much closer to the given trajectory of the end-effector.Numerical simulation and experiments are accomplished for the given trajectory based on fifth degree polynomial planning.At the points where the velocity suddenly changes,the length and tension variation curves of the planned and unplanned three cables are compared and analyzed.The OptiTrack motion capture system is adopted to track the end-effector of the UCPR during the experiment.The effectiveness and feasibility of fifth degree polynomial planning are validated. 展开更多
关键词 Under-constrained cable-suspended parallel robot Variable angle and height cable mast Inverse kinematic and dynamic modeling Algebraic method Point-to-point trajectory planning
下载PDF
Error modeling of 3-RSR parallel robot based on D-H transformation matrix 被引量:3
4
作者 李瑞琴 杨斌 《Journal of Measurement Science and Instrumentation》 CAS 2014年第3期53-59,2,共7页
By selecting any one limb of 3-RSR parallel robot as a research object, the paper establishes a position and orienta- tion relationship matrix between the moving platform and the base by means of Denavit-Hartenberg (... By selecting any one limb of 3-RSR parallel robot as a research object, the paper establishes a position and orienta- tion relationship matrix between the moving platform and the base by means of Denavit-Hartenberg (D-H) transformation matrix. The error mapping model is derived from original error to the error of the platform by using matrix differential method. This model contains all geometric original errors of the robot. The nonlinear implicit function relation between po- sition and orientation error of the platform and the original geometric errors is simplified as a linear explicit function rela- tion. The results provide a basis for further studying error analysis and error compensation. 展开更多
关键词 error modeling 3-RSR parallel robot Denavit-Hartenberg (D-H) transformation matrix
下载PDF
Error Modeling and Sensitivity Analysis of a Parallel Robot with SCARA(Selective Compliance Assembly Robot Arm) Motions 被引量:19
5
作者 CHEN Yuzhen XIE Fugui +1 位作者 LIU Xinjun ZHOU Yanhua 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2014年第4期693-702,共10页
Parallel robots with SCARA(selective compliance assembly robot arm) motions are utilized widely in the field of high speed pick-and-place manipulation. Error modeling for these robots generally simplifies the parall... Parallel robots with SCARA(selective compliance assembly robot arm) motions are utilized widely in the field of high speed pick-and-place manipulation. Error modeling for these robots generally simplifies the parallelogram structures included by the robots as a link. As the established error model fails to reflect the error feature of the parallelogram structures, the effect of accuracy design and kinematic calibration based on the error model come to be undermined. An error modeling methodology is proposed to establish an error model of parallel robots with parallelogram structures. The error model can embody the geometric errors of all joints, including the joints of parallelogram structures. Thus it can contain more exhaustively the factors that reduce the accuracy of the robot. Based on the error model and some sensitivity indices defined in the sense of statistics, sensitivity analysis is carried out. Accordingly, some atlases are depicted to express each geometric error’s influence on the moving platform’s pose errors. From these atlases, the geometric errors that have greater impact on the accuracy of the moving platform are identified, and some sensitive areas where the pose errors of the moving platform are extremely sensitive to the geometric errors are also figured out. By taking into account the error factors which are generally neglected in all existing modeling methods, the proposed modeling method can thoroughly disclose the process of error transmission and enhance the efficacy of accuracy design and calibration. 展开更多
关键词 parallel robot selective compliance assembly robot arm(SCARA) motions error modeling sensitivity analysis parallelogram structure
下载PDF
A Review on Cable-driven Parallel Robots 被引量:25
6
作者 Sen Qian Bin Zi +1 位作者 Wei-Wei Shang Qing-Song Xu 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2018年第4期37-47,共11页
Cable-driven parallel robots(CDPRs) are categorized as a type of parallel manipulators. In CDPRs, flexible cables are used to take the place of rigid links. The particular property of cables provides CDPRs several adv... Cable-driven parallel robots(CDPRs) are categorized as a type of parallel manipulators. In CDPRs, flexible cables are used to take the place of rigid links. The particular property of cables provides CDPRs several advantages, including larger workspaces, higher payload-to-weight ratio and lower manufacturing costs rather than rigid-link robots. In this paper, the history of the development of CDPRs is introduced and several successful latest application cases of CDPRs are presented. The theory development of CDPRs is introduced focusing on design, performance analysis and control theory. Research on CDPRs gains wide attention and is highly motivated by the modern engineering demand for large load capacity and workspace. A number of exciting advances in CDPRs are summarized in this paper since it is proposed in the 1980 s, which points to a fruitful future both in theory and application. In order to meet the increasing requirements of robot in different areas, future steps foresee more in-depth research and extension applications of CDPRs including intelligent control, composite materials, integrated and reconfigurable design. 展开更多
关键词 Cable-driven parallel robots Design and modelling Control and planning Performance and optimization
下载PDF
Kinematics and Dynamics Analysis of a Quadruped Walking Robot with Parallel Leg Mechanism 被引量:13
7
作者 WANG Hongbo SANG Lingfeng +2 位作者 HU Xing ZHANG Dianfan YU Hongnian 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2013年第5期881-891,共11页
It is desired to require a walking robot for the elderly and the disabled to have large capacity,high stiffness,stability,etc.However,the existing walking robots cannot achieve these requirements because of the weight... It is desired to require a walking robot for the elderly and the disabled to have large capacity,high stiffness,stability,etc.However,the existing walking robots cannot achieve these requirements because of the weight-payload ratio and simple function.Therefore,Improvement of enhancing capacity and functions of the walking robot is an important research issue.According to walking requirements and combining modularization and reconfigurable ideas,a quadruped/biped reconfigurable walking robot with parallel leg mechanism is proposed.The proposed robot can be used for both a biped and a quadruped walking robot.The kinematics and performance analysis of a 3-UPU parallel mechanism which is the basic leg mechanism of a quadruped walking robot are conducted and the structural parameters are optimized.The results show that performance of the walking robot is optimal when the circumradius R,r of the upper and lower platform of leg mechanism are 161.7 mm,57.7 mm,respectively.Based on the optimal results,the kinematics and dynamics of the quadruped walking robot in the static walking mode are derived with the application of parallel mechanism and influence coefficient theory,and the optimal coordination distribution of the dynamic load for the quadruped walking robot with over-determinate inputs is analyzed,which solves dynamic load coupling caused by the branches’ constraint of the robot in the walk process.Besides laying a theoretical foundation for development of the prototype,the kinematics and dynamics studies on the quadruped walking robot also boost the theoretical research of the quadruped walking and the practical applications of parallel mechanism. 展开更多
关键词 walking robot parallel leg mechanism KINEMATICS DYNAMICS over-determinate inputs
下载PDF
Multi-objective Optimization of a Parallel Ankle Rehabilitation Robot Using Modified Differential Evolution Algorithm 被引量:13
8
作者 WANG Congzhe FANG Yuefa GUO Sheng 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2015年第4期702-715,共14页
Dimensional synthesis is one of the most difficult issues in the field of parallel robots with actuation redundancy. To deal with the optimal design of a redundantly actuated parallel robot used for ankle rehabilitati... Dimensional synthesis is one of the most difficult issues in the field of parallel robots with actuation redundancy. To deal with the optimal design of a redundantly actuated parallel robot used for ankle rehabilitation, a methodology of dimensional synthesis based on multi-objective optimization is presented. First, the dimensional synthesis of the redundant parallel robot is formulated as a nonlinear constrained multi-objective optimization problem. Then four objective functions, separately reflecting occupied space, input/output transmission and torque performances, and multi-criteria constraints, such as dimension, interference and kinematics, are defined. In consideration of the passive exercise of plantar/dorsiflexion requiring large output moment, a torque index is proposed. To cope with the actuation redundancy of the parallel robot, a new output transmission index is defined as well. The multi-objective optimization problem is solved by using a modified Differential Evolution(DE) algorithm, which is characterized by new selection and mutation strategies. Meanwhile, a special penalty method is presented to tackle the multi-criteria constraints. Finally, numerical experiments for different optimization algorithms are implemented. The computation results show that the proposed indices of output transmission and torque, and constraint handling are effective for the redundant parallel robot; the modified DE algorithm is superior to the other tested algorithms, in terms of the ability of global search and the number of non-dominated solutions. The proposed methodology of multi-objective optimization can be also applied to the dimensional synthesis of other redundantly actuated parallel robots only with rotational movements. 展开更多
关键词 ankle rehabilitation parallel robot multi-objective optimization differential evolution algorithm
下载PDF
Kinematic Sensitivity Analysis and Dimensional Synthesis of a Redundantly Actuated Parallel Robot for Friction Stir Welding 被引量:6
9
作者 Xinxue Chai Ningbin Zhang +2 位作者 Leiying He Qinchuan Li Wei Ye 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2020年第1期94-103,共10页
Friction stir welding(FSW)has been widely applied in many fields as an alternative to traditional fusion welding.Although serial robots can provide the orientation capability required to weld along curved surfaces,the... Friction stir welding(FSW)has been widely applied in many fields as an alternative to traditional fusion welding.Although serial robots can provide the orientation capability required to weld along curved surfaces,they cannot adequately support the huge axial downward forces that FSW generates.Available parallel mechanism architectures,particularly redundantly actuated architectures for FSW,are still very limited.In this paper,a redundantly actuated 2 UPR-2 RPU parallel robot for FSW is proposed,where U denotes a universal joint,R denotes a revolute joint and P denotes a prismatic pair.First,its semi-symmetric structure is described.Next,inverse kinematics analysis involving an analytical representation of rotational axes is implemented.Velocity analysis is also conducted,which leads to the formation of a Jacobian matrix.Sensitivity performance is evaluated utilizing level set and convex optimization methods,where the local sensitivity indices are unit consistent,coordinate free,and of definite physical significance.Furthermore,global and hierarchical sensitivity indices are proposed for the design process.Finally,dimension synthesis is conducted based on the sensitivity indices and the optimal link parameters of the parallel robot are obtained.In summary,this paper proposes a dimensional synthesis method for a redundantly actuated parallel robot for FSW based on sensitivity indices. 展开更多
关键词 parallel robot ACTUATION REDUNDANCY Sensitivity Optimization Friction STIR welding
下载PDF
Biped Walking Robot Based on a 2-UPU+2-UU Parallel Mechanism 被引量:7
10
作者 MIAO Zhihuai YAO Yan'an KONG Xianwen 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2014年第2期269-278,共10页
Existing biped robots mainly fall into two categories: robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walk... Existing biped robots mainly fall into two categories: robots with left and right feet and robots with upper and lower feet. The load carrying capability of a biped robot is quite limited since the two feet of a walking robot supports the robot alternatively during walking. To improve the load carrying capability, a novel biped walking robot is proposed based on a 2-UPU+2-UU parallel mechanism. The biped walking robot is composed of two identical platforms(feet) and four limbs, including two UPU(universal-prismatic-universal serial chain) limbs and two UU limbs. To enhance its terrain adaptability like articulated vehicles, the two feet of the biped walking robot are designed as two vehicles in detail. The conditions that the geometric parameters of the feet must satisfy are discussed. The degrees-of-freedom of the mechanism is analyzed by using screw theory. Gait analysis, kinematic analysis and stability analysis of the mechanism are carried out to verify the structural design parameters. The simulation results validate the feasibility of walking on rugged terrain. Experiments with a physical prototype show that the novel biped walking robot can walk stably on smooth terrain. Due to its unique feet design and high stiffness, the biped walking robot may adapt to rugged terrain and is suitable for load-carrying. 展开更多
关键词 parallel mechanism biped robot screw theory gait analysis
下载PDF
Gait Analysis of a Radial Symmetrical Hexapod Robot Based on Parallel Mechanisms 被引量:6
11
作者 XU Kun DING Xilun 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2014年第5期867-879,共13页
Most gait studies of multi-legged robots in past neglected the dexterity of robot body and the relationship between stride length and body height.This paper investigates the performance of a radial symmetrical hexapod... Most gait studies of multi-legged robots in past neglected the dexterity of robot body and the relationship between stride length and body height.This paper investigates the performance of a radial symmetrical hexapod robot based on the dexterity of parallel mechanism.Assuming the constraints between the supporting feet and the ground with hinges,the supporting legs and the hexapod body are taken as a parallel mechanism,and each swing leg is regarded as a serial manipulator.The hexapod robot can be considered as a series of hybrid serial-parallel mechanisms while walking on the ground.Locomotion performance can be got by analyzing these equivalent mechanisms.The kinematics of the whole robotic system is established,and the influence of foothold position on the workspace of robot body is analyzed.A new method to calculate the stride length of multi-legged robots is proposed by analyzing the relationship between the workspaces of two adjacent equivalent parallel mechanisms in one gait cycle.Referring to service region and service sphere,weight service sphere and weight service region are put forward to evaluate the dexterity of robot body.The dexterity of single point in workspace and the dexterity distribution in vertical and horizontal projection plane are demonstrated.Simulation shows when the foothold offset goes up to 174 mm,the dexterity of robot body achieves its maximum value 0.164 4 in mixed gait.The proposed methods based on parallel mechanisms can be used to calculate the stride length and the dexterity of multi-legged robot,and provide new approach to determine the stride length,body height,footholds in gait planning of multi-legged robot. 展开更多
关键词 hexapod robot parallel mechanism KINEMATICS stride length DEXTERITY weight service sphere
下载PDF
STRUCTURE SYNTHESIS OF 4-DOF PARALLEL ROBOT MECHANISMS BASED ON SCREW THEORY 被引量:4
12
作者 FangHairong FangYuefa GuoSheng 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2004年第4期486-489,共4页
Structural synthesis for 4-DOF parallel manipulators using screw theory issystematically studied. Motion properties and constraint conditions of 4-DOF parallel manipulatorsaccording to the relationship between screw a... Structural synthesis for 4-DOF parallel manipulators using screw theory issystematically studied. Motion properties and constraint conditions of 4-DOF parallel manipulatorsaccording to the relationship between screw and reciprocal screw are analyzed. Mathematicalexpressions for constraint screws and twist screws of moving platform are constructed, and allpossible limbs, which provide one or more force constraints, are enumerated. Finally, a parallelmanipulator with 3-rotation-DOF and 1-translation-DOF is used as an example to describe thesynthesis procedure for symmetrical and non-symmetrical 4-DOF parallel manipulators. 展开更多
关键词 Screw theory robot parallel mechanisms Structure synthesis
下载PDF
Robotic Intra-Operative Ultrasound:Virtual Environments and Parallel Systems 被引量:4
13
作者 Shuangyi Wang James Housden +6 位作者 Tianxiang Bai Hongbin Liu Junghwan Back Davinder Singh Kawal Rhode Zeng-Guang Hou Fei-Yue Wang 《IEEE/CAA Journal of Automatica Sinica》 SCIE EI CSCD 2021年第5期1095-1106,共12页
Robotic intra-operative ultrasound has the potential to improve the conventional practice of diagnosis and procedure guidance that are currently performed manually.Working towards automatic or semi-automatic ultrasoun... Robotic intra-operative ultrasound has the potential to improve the conventional practice of diagnosis and procedure guidance that are currently performed manually.Working towards automatic or semi-automatic ultrasound,being able to define ultrasound views and the corresponding probe poses via intelligent approaches become crucial.Based on the concept of parallel system which incorporates the ingredients of artificial systems,computational experiments,and parallel execution,this paper utilized a recent developed robotic trans-esophageal ultrasound system as the study object to explore the method for developing the corresponding virtual environments and present the potential applications of such systems.The proposed virtual system includes the use of 3 D slicer as the main workspace and graphic user interface(GUI),Matlab engine to provide robotic control algorithms and customized functions,and PLUS(Public software Library for Ultra Sound imaging research)toolkit to generate simulated ultrasound images.Detailed implementation methods were presented and the proposed features of the system were explained.Based on this virtual system,example uses and case studies were presented to demonstrate its capabilities when used together with the physical TEE robot.This includes standard view definition and customized view optimization for pre-planning and navigation,as well as robotic control algorithm evaluations to facilitate real-time automatic probe pose adjustments.To conclude,the proposed virtual system would be a powerful tool to facilitate the further developments and clinical uses of the robotic intra-operative ultrasound systems. 展开更多
关键词 Medical robots parallel intelligence parallel systems robotic-assisted surgery robotic ultrasound
下载PDF
Kinematics of novel 6-HTRT parallel robot 被引量:2
14
作者 于晖 孙立宁 +1 位作者 刘品宽 蔡鹤皋 《Journal of Harbin Institute of Technology(New Series)》 EI CAS 2002年第2期121-124,共4页
A parallel robot featwes low inertia moment of end effector, high mechanical rigitity, high mobility, no accumulation of motion error at end effector and high capacity of load, and it has found a wide applications in ... A parallel robot featwes low inertia moment of end effector, high mechanical rigitity, high mobility, no accumulation of motion error at end effector and high capacity of load, and it has found a wide applications in various fields such as automobile assembly line, earth digging machine, conjuncture of aircraft and flight simulator. In this paper the kinematics of a novel style 6 HTRT Parallel Robot is studied. The algorithm for an inverse kinematic problem of the parallel robot considering the constraint condition is presented. By the use of vector cross product method, the comprehensive coefficient of the parallel mechanism is introduced and the Jacobian matrix of a 6 HTRT parallel robot is presented. The relationship between the velocity of end manipulator and the generalized velocity is also studied with the method of Jacobian matrix. Using the result of study in mechanical dimension synthesis, better performance is achieved with the parallel robot. In motion control, it will be helpful for us to simplify the control algorithm and make more efficient trajectory planning. 展开更多
关键词 parallel robot INVERSE KINEMATIC problem JACOBIAN matrix influence coefficient
下载PDF
Residual Vibration Reduction of High-Speed Pick-and-Place Parallel Robot Using Input Shaping 被引量:3
15
作者 Xianlei Shan Yuhang Li +1 位作者 Haitao Liu Tian Huang 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2022年第1期62-69,共8页
Because of their elastic links and joints,high-speed parallel robots for pick-and-place operations inevitably suffer from residual vibrations that significantly degrade their positioning accuracy.An effective approach... Because of their elastic links and joints,high-speed parallel robots for pick-and-place operations inevitably suffer from residual vibrations that significantly degrade their positioning accuracy.An effective approach based on the input shaping technique is presented in this paper for suppressing the residual vibration in these parallel robots.After addressing the design principle of an input shaper for a parallel robot with flexible actuated joints,a robust optimal input shaper is developed by considering the configuration-dependent flexible modes and minimizing the maximum percentage of residual vibration at the end-effector.The input shaper allows a good overall performance to be achieved throughout the entire workspace.Experimental results on a 4-DOF SCARA-type parallel robot show that the residual vibration of the end-effector is dramatically reduced and the dynamic positioning accuracy of the robot significantly improved. 展开更多
关键词 Pick-and-place parallel robot Residual vibration reduction Input shaping
下载PDF
CONTINUATION METHOD APPLIED IN KINEMATICS OF PARALLEL ROBOT 被引量:1
16
作者 DONG Bin(董滨) +1 位作者 ZHANG Xiang-de(张祥德) 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2001年第12期1422-1428,共7页
Continuation method solving forward kinematics problem of parallel robot was discussed. And through a coefficient-parameter continuation method the efficiency and feasibility of continuation method were improved. Usin... Continuation method solving forward kinematics problem of parallel robot was discussed. And through a coefficient-parameter continuation method the efficiency and feasibility of continuation method were improved. Using this method all forward solutions of a new parallel robot model which was put forward lately by Robot Open Laboratory of Science Institute of China were obtained. Therefore it provided the basis of mechanism analysis and real-time control for new model. 展开更多
关键词 continuation method parallel robot kinematics generic continuation coefficient-parameter continuation
下载PDF
Robust scheme of global parallel force/position regulators for robot manipulators under environment uncertainty 被引量:1
17
作者 Chunqing HUANG Lisang LIU +1 位作者 Xinggui WANG Songjiao SHI 《控制理论与应用(英文版)》 EI 2007年第3期271-277,共7页
A simple robust scheme of parallel force/position control is proposed in this paper to deal with two problems for non-planar constraint surface and nonlinear mechanical feature of environment: i) uncertainties in en... A simple robust scheme of parallel force/position control is proposed in this paper to deal with two problems for non-planar constraint surface and nonlinear mechanical feature of environment: i) uncertainties in environment that are usually not available or difficult to be determined in most practical situations; ii) stability problem or/and integrator windup due to the integration of force error in the force dominance rule in parallel force/position control. It shows that this robust scheme is a good alternative for anti-windup. In the presence of environment uncertainties, global asymptotic stability of the resulting closed-loop system is guaranteed; it environment with complex characteristics. Finally, numerical robot manipulator. also shows robustness of the proposed controller to uncertain simulation verifies results via contact task of a two rigid-links 展开更多
关键词 robot manipulator parallel force/position control Globally asymptotic stability Uncertain environment Anti-windup
下载PDF
Velocity Constraints Based Approach for Online Trajectory Planning of High‑Speed Parallel Robots 被引量:1
18
作者 Di Yang Fugui Xie Xinjun Liu 《Chinese Journal of Mechanical Engineering》 SCIE EI CAS CSCD 2022年第6期98-109,共12页
High-speed parallel robots have been extensively utilized in the light industry.However,the influence of the nonlinear dynamic characteristics of high-speed parallel robots on system’s dynamic response and stable ope... High-speed parallel robots have been extensively utilized in the light industry.However,the influence of the nonlinear dynamic characteristics of high-speed parallel robots on system’s dynamic response and stable operation cannot be ignored during the high-speed reciprocating motion.Thus,trajectory planning is essential for efficiency and stability from pick-and-place(PAP)actions.This paper presents a method for planning the equal-height pick-and-place trajectory considering velocity constraints to improve the PAP efficiency and stability of high-speed parallel robots.The velocity constraints in the start-and-end points can reduce vibration from picking and placing,making the trajectory more suitable to complex beltline situations.Based on velocity constraints,trajectory optimization includes trajectory smoothness and joint torque to optimize cycle time is carried out.This paper proposes an online trajectory optimization solution.By using back propagation(BP)neural networks,the solution is simplified and can be solved in real-time.Simulation and experiments were carried out on the SR4 parallel robot.The results show that the proposed method improves the efficiency,smoothness,and stability of the robot.This paper proposes an online trajectory planning method which is velocity constraints based and can improve the efficiency and stability of high-speed parallel robots.The work of this research is conducive to finely applying high-speed parallel robots. 展开更多
关键词 Trajectory planning High-speed parallel robot Velocity constraints BP neural network
下载PDF
Parallel evolutionary computing and 3-tier load balance of remote mining robot 被引量:1
19
作者 龚涛 蔡自兴 《中国有色金属学会会刊:英文版》 CSCD 2003年第4期948-952,共5页
To realize nonferrous metals deposit mining remotely with mobile robot under unknown environment, parallel evolutionary computing and 3 tier load balance were proposed to overcome the efficiency problem of online evol... To realize nonferrous metals deposit mining remotely with mobile robot under unknown environment, parallel evolutionary computing and 3 tier load balance were proposed to overcome the efficiency problem of online evolutionary computing. A system of polar coordinates can be established on remote mining robot with the polar point of current position and the polar axis from the current point to goal point. With the polar coordinate system path planning of remote mining robot can be computed in a parallel way. From the results of simulations and analysis based on agent techniques, good computing quality can be guaranteed for remote mining robot, such as efficiency, optimization and robustness. 展开更多
关键词 采矿机器人 遥控 负荷平衡 并行计算 遗传算法
下载PDF
Study on singularity analysis with differential transform method for 3-RRUR parallel robot based on Jacobian matrix
20
作者 董悫 蒋志宏 黄强 《Journal of Beijing Institute of Technology》 EI CAS 2011年第3期372-378,共7页
Parallel robot is used in many different fields nowadays, but the singularity of 3-RRUR parallel robot is more complicated, so a method to analyze the singularity of the 3-RRUR parallel robot is very necessary. First,... Parallel robot is used in many different fields nowadays, but the singularity of 3-RRUR parallel robot is more complicated, so a method to analyze the singularity of the 3-RRUR parallel robot is very necessary. First, the Jacobian matrix was built based on the differential transform method through the transfer matrixes between the poles. The connection between the position parameters and singularity condition was built through the analysis of the Jacobian matrix. Second, the effect on the singularity from the position parameters was analyzed, and then the singularity condition was confirmed. The effect on the singularity condition from position parameters was displayed by the curved surface charts to provide a basic method for the designing of the parallel robot. With this method, the singularity condition could be got when the length of each link is firmed, so it can be judged that if a group of parameters are appropriate or not, and the method also provides warrant for workspace and path planning of the parallel robot. 展开更多
关键词 Jacobian matrix parallel robot SINGULARITY
下载PDF
上一页 1 2 86 下一页 到第
使用帮助 返回顶部