Biomaterial Based on Doped Calcium Carbonate-Phosphate for Active Osteogenesis

Doped calcium carbonate-phosphate is a biocompatible material that influence actively on the osteogenesis, bone regenerate, strengthening of bone and dental tissues including through the skin. A mechanism of the synthesis reactions of doped nanocrystalline calcium carbonate-phosphate an oscillating type of model for these reactions is proposed. The results indicate that the synthesis involves the formation of hydroxy carbonate complexes from the three calcium carbonate polymorphs (calcite, vaterite, and aragonite) in a solution of ammonium chloride and ammonium carbonate, followed by reaction with orthophosphoric acid. The formation of nanocrystalline calcium carbonate-phosphate doped with Fe2+, Mg2+, Zn2+, K+, Si4+, and Mn2+, has been studied by X-ray diffraction, IR spectroscopy, differential thermal analysis, and energy dispersive X-ray fluorescence analysis. This ensures the preparation of a bioactive material based on octacalcium hydrogen phosphate, and calcium chloride hydroxide phosphates containing cation vacancies. Particle-size analysis data show that the materials contain nanoparticles down to 10 nm in size. Heat treatment of the doped calcium carbonate phosphates produces calcium hydroxyapatite containing cation vacancies, which can be used as a bioactive ceramic.

Optimization by the Taguchi Method of a Robust Synthesis Protocol of Calcium Carbonate Phosphate

The experimental processes are difficult to model by physical laws, because a multitude of factors can intervene simultaneously and are responsible for their instabilities and their random variations. Two types of factors are to be considered;those that are easy to manipulate according to the objectives, and those that can vary randomly (uncontrollable factors). These could eventually divert the system from the desired target. It is, therefore, important to implement a system that is insensitive to fluctuations in factors that are difficult to control. The aim of this study is to optimize the synthesis of an apatitic calcium carbonate phosphate characterized with a Ca/P ratio equal to 1.61 by using the experimental design method based on the Taguchi method. In this process, five factors are considered and must be configured to achieve the previously defined objective. The temperature is a very important factor in the process, but difficult to control experimentally, so considered to be a problem factor (noise factor), forcing us to build a robust system that is insensitive to the last one. Therefore, a much simpler model to study the robustness of a synthetic solution with respect to temperature is developed. We have tried to parameterize all the factors considered in the process within a wide interval of temperature variation (60˚C - 90˚C). Temperature changes are no longer considered as a problem for apatitic calcium carbonate phosphate synthesis. In this finding, the proposed mathematical model is linear and efficient with very satisfactory statistical indicators. In addition, several simple solutions for the synthesis of carbonate phosphate are proposed with a Ca/P ratio equal to 1.61.

Effect of Fluoride on the Ion-association of Calcium Phosphate and Crystallization of Hydroxyapatite

Using a titration setup to accurately control the reaction conditions and in situ monitor the reaction,we showed that fluoride exhibited negligible effects on the ion association process of calcium and phosphate and the formation of ACP nanospheres in a buffer solution with constant ionic strength.However,the stability of ACP increased with increasing fluoride concentration,which was ascribed to the inhibitory effect of fluoride on the aggregation of ACP nanospheres and the nucleation of nanocrystals on the surface of ACP nanospheres.Furthermore,fluoride could inhibit the lateral growth of HAP nanosheets and promote the formation of rod-like crystals.These results further improve our understanding of the crystallization pathway of HAP crystals and the regulatory effects of fluoride.

Immunomodulatory activity of polycaprolactone nanoparticles with calcium phosphate salts against Leishmania infantum infection

Objective:To prepare and characterize polycaprolactone(PCL)nanoparticles loaded with sonicator fragmented(SLA)and freeze-thaw Leishmania antigens(FTLA)and to investigate the in vitro immunogenicity of antigen-encapsulated nanoparticles with calcium phosphate adjuvant.Methods:The water/oil/water binary emulsion solvent evaporation method was used to synthesize antigen-loaded PCL nanoparticles.Particles were characterized by scanning electron microscopy and zeta potential measurements.Their cytotoxicity in J774 macrophages in vitro was determined by MTT analysis.In addition,the amount of nitric oxide and the level of cytokines produced by macrophages were determined by Griess reaction and ELISA method,respectively.The protective effect of the developed formulations was evaluated by determining the infection index percentage in macrophages infected with Leishmania infantum.Results:Compared to the control group,SLA PCL and FTLA PCL nanoparticles with calcium phosphate adjuvant induced a 6-and 7-fold increase in nitric oxide,respectively.Additionally,the vaccine formulations promoted the production of IFN-γand IL-12.SLA PCL and FTLA PCL nanoparticles combined with calcium phosphate adjuvant caused an approximately 13-and 11-fold reduction in infection index,respectively,compared to the control group.Conclusions:The encapsulation of antigens obtained by both sonication and freeze-thawing into PCL nanoparticles and the formulations with calcium phosphate adjuvant show strong in vitro immune stimulating properties.Therefore,PCL-based antigen delivery systems and calcium phosphate adjuvant are recommended as a potential vaccine candidate against leishmaniasis.

Preparation of high-purity fluorite and nanoscale calcium carbonate from low-grade fluorite

Flotation separation of calcite from fluorite is a challenge on low-grade fluorite flotation that limits the recovery and purity of fluorite concentrate.A new acid leaching–flotation process for fluorite is proposed in this work.This innovative process raised the fluor-ite’s grade to 97.26wt%while producing nanoscale calcium carbonate from its leachate,which contained plenty of calcium ions.On the production of nanoscale calcium carbonate,the impacts of concentration,temperature,and titration rate were examined.By modifying the process conditions and utilizing crystal conditioning agents,calcite-type and amorphous calcium carbonates with corresponding particle sizes of 1.823 and 1.511μm were produced.The influence of the impurity ions Mn^(2+),Mg^(2+),and Fe^(3+)was demonstrated to reduce the particle size of nanoscale calcium carbonate and make crystal shape easier to manage in the fluorite leach solution system compared with the calcium chloride solution.The combination of the acid leaching–flotation process and the nanoscale calcium carbonate preparation method improved the grade of fluorite while recovering calcite resources,thus presenting a novel idea for the effective and clean usage of low-quality fluorite resources with embedded microfine particles.

Effect of carbon fiber on calcium phosphate bone cement

The calcium phosphate cement (α-TCP/TTCP) was reinforced with oxidation-t reated carbon fibers. The effect of aspect ratio and content of carbon fiber on the compression strength and bending strength of the hardened body was discussed . The results show that the reinforcing effect is optimal as the aspect ratio is 375 and the additive amount is 0.3%(mass fraction). Under this condition,the c ompressive strength is increased by 55% (maximum 63.46 MPa),and the bending st rength is nearly increased by 100% (maximum 11.95 MPa),respectively. However,if the additive quantity and aspect ratio are too high,the effect of the carbon fibers is limited because it can not be dispersed uniformly in the hardened bod y. The biological evaluation indicates that the calcium phosphate cement reinfor ced by carbon fibers has good biocompatibility.

Corrosion resistance of cerium-doped zinc calcium phosphate chemical conversion coatings on AZ31 magnesium alloy

Zinc calcium phosphate （Zn-Ca-P） coating and cerium-doped zinc calcium phosphate （Zn-Ca-Ce-P） coating were prepared on AZ31 magnesium alloy. The chemical compositions, morphologies and corrosion resistance of coatings were investigated through energy-dispersive X-ray spectroscopy （EDS）, X-ray photoelectron spectroscopy （XPS）, X-ray diffraction （XRD）, electron probe micro-analysis （EPMA） and scanning electron microscopy （SEM） together with hydrogen volumetric and electrochemical tests. The results indicate that both coatings predominately contain crystalline hopeite （Zn3（PO4）2·4H2O）, Mg3（PO4）2 and Ca3（PO4）2, and traces of non-crystalline MgF2 and CaF2. The Zn-Ca-Ce-P coating is more compact than the Zn-Ca-P coating due to the formation of CePO4, and displays better corrosion resistance than the Zn-Ca-P coating. Both coatings protect the AZ31 Mg substrate only during an initial immersion period. The micro-galvanic corrosion between the coatings and their substrates leads to an increase of hydrogen evolution rate （HER） with extending the immersion time. The addition of Ce promotes the homogenous distribution of Ca and formation of hopeite. The Zn-Ca-Ce-P coating has the potential for the primer coating on magnesium alloys.

Separation of manganese from calcium and magnesium in sulfate solutions via carbonate precipitation

The separation of manganese from sulfate solutions containing 14.59 g/L Mn2+, 1.89 g/L Mg2+ and 1.54 g/L Ca2+ was preformed successfully by carbonate precipitation. The results of thermodynamic analysis and tests indicate that carbonate precipitation holds better selectivity for manganese over magnesium than hydroxide precipitation and the feeding method is the most critical factor for minimizing the co-precipitation of calcium and magnesium. Furthermore, with adding MnSO4 solution to NH4HCO3 solution, the effects of the initial NH4HCO3 concentration, NH4HCO3 amount, solution pH value, reaction temperature and time on carbonate precipitation were evaluated and the optimum precipitation conditions were obtained. Under the optimum conditions, the precipitation rates of Mn2+, Ca2+ and Mg2+ are 99.75%, 5.62% and 1.43%, respectively. Moreover, the prepared manganese carbonate was characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM) equipped with energy-dispersive X-ray spectroscopy (EDX). The results demonstrate that the product can be indexed to the rhombohedral structure of MnCO3.

Synthesis of fluorescent calcium phosphate/carbon dot hybrid composites for detection of copper ions and cell imaging

As a new form of fluorescent carbon nanomaterials, carbon dots （CDs） have many advantages such as simplicity of synthesis, low biological toxicity, resistance to photobleaching, excellent in biocompatibility and easy to modify. As the most inorganic mineral of human hard tissues including bone and tooth, calcium phosphate （CaP） materials have high biocompatibility and good biodegradability. The hydroxyapatite （HA）, a common type of calcium phosphate, has been widely used in drug delivery, removal of heavy metal ions, gene transfection and other biomedical fields. Herein, a novel method for preparation of fluorescent calcium phosphate/carbon dot （ CaP/ CD） hybrid composites was described. We first prepared CDs with a quantum yield of 51.5 % by carbonization of citric acid with polyethylenimine （PEI） in one step. Next, the fluorescent CaP/CD hybrid composites upon UV ex- citation were obtained in the presence of carboxymethyl cellulose （CMC） as a template and CD as a co-template. The as-prepared CaP/CD hybrid composites consisted of irregularly shaped nanorods with a length of 50 - 140 nm and a diameter of 10- 25 nm were characterized by transmitted electron microscopy （TEM）. And the highly mag- nified TEM image of CaP/CD hybrid composites showed that tens of CDs in shape of nanodot indeed existed in the CaP/CD hybrid composites. More importantly, CDs enabled the CaP/CD hybrid composites to emit bright blue flu- orescence under UV irradiation. In addition, the result of X-ray powder diffraction （XRD） patterns indicated that the crystalline phase of CaP/CD hybrid composites were in good agreement with those of hexagonal HA （JCPDS Da- ta Card 09-0432）. Moreover, it was found that the as-synthesized CaP/CD hybrid composites were potentially use- ful in detecting the concentration of Cu2＋ and imaging the cell with nontoxic as potential fluorescent probes.

Preparation and mechanism of calcium phosphate coatings on chemical modified carbon fibers by biomineralization

In order to prepare HA coatings on the carbon fibers,chemical modification and biomineralization processes were applied.The phase components,morphologies,and possible growth mechanism of calcium phosphate were studied by infrared spectroscopy(IR),X-ray diffractometry(XRD)and scanning electron microscopy(SEM).The results show that calcium phosphate coating on carbon fibers can be obtained by biomineralization.But the phase components and morphologies of calcium phosphate coatings are different due to different modification methods.Plate-like CaHPO4.2H2O(DCPD)crystals grow from one site of the active centre by HNO3 treatment.While on the para-aminobenzoic acid treated fibers,the coating is composed of nano-structural HA crystal homogeneously.This is because the -COOH functional groups of para-aminobenzoic acid graft on fibers,with negative charge and arranged structure,accelerating the HA crystal nucleation and crystallization on the carbon fibers.

Evolution Mechanism of Calcium Carbonate in Solution

Calcium carbonate was synthesized in a CaCl2/NaCO3 mixed solution by using ethylenediaminetetraacetic acid （EDTA） as an additive. The thermodynamics and kinetics analyses indicate that although the driving force of amorphous calcium carbonate （ACC） precipitation is always less than that of calcite and vaterite precipitation, the nucleation rate of ACC is greater than that of calcite and vaterite at the initial stage of the precipitation reaction. With the increasing incubation time, vaterite and calcite particles nucleate heterogeneously by using the as-formed particles as active sites. Scanning electron microscopy images indicate that the transformation mechanism of ACC and vaterite to calcite is the dissolution-recrystallisation reaction. The presence of EDTA not only improves the stabilities of ACC and vaterite, but also leads to forming enlongated, connected rhombohedral calcite crystals after incubation 7 days in solutions. The ACC and vaterite are stabler in air than in solutions at room temperature, although the dissolution-recrystallisation reaction occurs on the surface.

Effect of Calcium Phosphate Glass on Dentinal Tubule Sealing after Irradiation with the Carbon Dioxide Laser

The aim of this study was to evaluate the dentinal tubule sealing and acid resistance of dentin specimens following the application of calcium phosphate glass powder prior to irradiation with a CO2(carbon dioxide)laser.Dentin models simulating open dentinal tubules were divided into two groups:experimental(calcium phosphate glass slurry applied to the dentin surface)and control(no slurry applied to the surface).All specimens in the experimental group and five specimens in the control group were irradiated with a CO2 laser.The defocused laser beams(0.5 and 1 W)were applied(spot size,5 mm in diameter)from a distance of 20 mm for 10 s.The surfaces and cross-sectional areas of the specimens were examined using an SEM(scanning electron microscope).In addition,the resistance to acid was evaluated in these specimens.The open dentinal tubules in the control groups were sealed following irradiation with the CO2 laser at 0.5 W and 1.0 W.Likewise,sealing of open dentinal tubules was observed in the experimental group after CO2 laser irradiation.The acid resistance of the dentin surface was improved after CO2 laser irradiation;specimens in the experimental group presented with significantly lower amounts of Ca ion release compared to those in the control group.These findings indicate that CO2 laser irradiation alone or after the application of calcium phosphate glass powder can effectively seal the dentinal tubules and alleviate dentin hypersensitivity.

Calcium titanate corrosion inhibitor enabling carbon as inert anode for oxygen evolution in molten chlorides

The corrosion inhibition efficacy of titanate(CaTiO_(3))for carbon anodes in molten salts was investigated through various analytical techniques,including linear sweep voltammetry,X-ray diffraction,scanning electron microscopy,and energy dispersion spectroscopy.The results demonstrate that the addition of CaTiO_(3)corrosion inhibitor efficiently passivates the carbon anode and leads to the formation of a dense CaTiO_(3)layer during the electrolysis process in molten CaCl_(2)-CaO.Subsequently,the passivated carbon anode effectively undergoes the oxygen evolution reaction,with an optimal current density for passivation identified at 400 m A/cm^(2).Comprehensive investigations,including CaTiO_(3)solubility tests in molten CaCl_(2)-CaO and numerical modeling of the stability of complex ionic structures,provide compelling evidence supporting“complexation-precipitation”passivation mechanism.This mechanism involves the initial formation of a complex containing TiO_(2)·nCaO by CaTiO_(3)and CaO,which subsequently decomposes to yield CaTiO_(3),firmly coating the surface of the carbon anode.In practical applications,the integration of CaTiO_(3)corrosion inhibitor with the carbon anode leads to the successful preparation of the FeCoNiCrMn high-entropy alloy without carbon contamination in the molten CaCl_(2)-CaO.

Highly Efficient and Selective Removal of Pb（II） ions by Sulfur-Containing Calcium Phosphate Nanoparticles

A facile one-step co-precipitation method was demonstrated to fabricate amorphous sulfurcontaining calcium phosphate （SCP） nanoparticles, in which the sulfur group was in-situ introduced into calcium phosphate. The resulting SCP exhibited a noticeable enhanced performance for Pb（II） removal in comparison with hydroxyapatite （HAP）, being capable of easily reducing 20 ppm of Pb（II） to below the acceptable standard for drinking water within less than 10 min. Remarkably, the saturated removal capacities of Pb（II） on SCP were as high as 1720.57 mg/g calculated by the Langmuir isotherm model, exceeding largely that of the previously reported absorbents. Significantly, SCP displayed highly selective removal ability toward Pb（II） ions in the presence of the competing metal ions （Ni（II）, Co（II）, Zn（II）, and Cd（II））. Further investigations indicated that such ultra-high removal efficiency and preferable affinity of Pb（II） ions on SCP may be reasonably ascribed to the formation of rodlike hydroxypyromorphite crystals on the surface of SCP via dissolution-precipitation and ion exchange reactions, accompanied by the presence of lead sulfide precipitates. High removal efficiency, fast removal kinetics and excellent selectivity toward Pb（II） made the obtained SCP material an ideal candidate for Pb（II） ions decontamination in practical application.

Effect of humic substances on the precipitation of calcium phosphate

For phosphorus （P） recovery from wastewater, the effect of humic substances （HS） on the precipitation of calcium phosphate was studied. Batch experiments of calcium phosphate precipitation were undertaken with synthetic water that contained 20 mg/L phosphate （as P） and 20 mg/L HS （as dissolved organic carbon, DOC） at a constant pH value in the range of 8.0-10.0. The concentration variations of phosphate, calcium （Ca） and HS were measured in the precipitation process; the crystalline state and compositions of the precipitates were analysed by powder X-ray diffraction （XRD） and chemical methods, respectively. It showed that at solution pH 8.0, the precipitation rate and removal efficiency of phosphate were greatly reduced by HS, but at solution pH ≥9.0, the effect of HS was very small. The Ca consumption for the precipitation of phosphate increased when HS was added; HS was also removed from solution with the precipitation of calcium phosphate. At solution pH 8.0 and HS concentrations ≤3.5 mg/L, and at pH ≥ 9.0 and HS concentrations ≤ 10 mg/L, the final precipitates were proved to be hydroxyapatite （HAP） by XRD. The increases of solution pH value and initial Ca/P ratio helped reduce the influence of HS on the precipitation of phosphate.

Preparation of calcium carbonate particles coated with titanium dioxide

The preparation of a new mineral composite material, calcium carbonate particles coated with titanium dioxide, was studied. The mechanism of the preparation process was proposed. The new mineral composite material was made by the mechanoehemieal method under the optimum condition that the mass ratio of calcium carbonate particles to titanium dioxide was 6.5：3.5. The mass ratios of two different types of titanium dioxide （anatase to rutile） and grinding media to grinded materials were 8：2 and 4：1 respectively, and the modified density was 60%. Under this condition, the new material was capable of forming after 120-min modification. The hiding power and oil absorption of this new material were 29.12 g/m^2 and 23.30%, respectively. The results show that the modification is based on surface hydroxylation. After coating with titanium dioxide, the hiding power of calcium carbonate can be improved greatly. The new mineral composite materials can be used as the substitute for titanium dioxide.

Effects of quaternary ammonium chain length on the antibacterial and remineralizing effects of a calcium phosphate nanocomposite

Composites containing nanoparticles of amorphous calcium phosphate （NACP） remineralize tooth lesions and inhibit caries. A recent study synthesized quaternary ammonium methacrylates （QAMs） with chain lengths （CLs） of 3-18 and determined their effects on a bonding agent. This study aimed to incorporate these QAMs into NACP nanocomposites for the first time to simultaneously endow the material with antibacterial and remineralizing capabilities and to investigate the effects of the CL on the mechanical and biofilm properties. Five QAMs were synthesized： DMAPM （CL3）, DMAHM （CL6）, DMADDM （CL12）, DMAHDM （CL16）, and DMAODM （CL18）. Each QAM was incorporated into a composite containing 20% NACP and 50% glass fillers. A dental plaque microcosm biofilm model was used to evaluate the antibacterial activity. The flexural strength and elastic modulus of nanocomposites with QAMs matched those of a commercial control composite （n = 6; P 〉 0.1）. Increasing the CL from 3 to 16 greatly enhanced the antibacterial activity of the NACP nanocomposite （P 〈 0.05）; further increasing the CL to 18 decreased the antibacterial potency. The NACP nanocomposite with a CL of 16 exhibited biofilm metabolic activity and acid production that were 10-fold lesser than those of the control composite. The NACP nanocomposite with a CL of 16 produced 2-log decreases in the colony-forming units （CFU） of total microorganisms, total streptococci, and mutans streptococci. In conclusion, QAMs with CLs of 3-18 were synthesized and incorporated into an NACP nanocomposite for the first time to simultaneously endow the material with antibacterial and remineralization capabilities. Increasing the C/reduced the metabolic activity and acid production of biofilms and caused a 2-log decrease in CFU without compromising the mechanical properties. Nanocomposites exhibiting strong anti-biofilm activity, remineralization effects, and mechanical properties are promising materials for tooth restorations that inhibit caries.

Utility of tricalcium phosphate and osteogenic matrix cell sheet constructs for bone defect reconstruction

AIM: To determine the effects of transplanting osteogenic matrix cell sheets and beta-tricalcium phosphate(TCP) constructs on bone formation in bone defects.METHODS: Osteogenic matrix cell sheets were prepared from bone marrow stromal cells(BMSCs), and a porous TCP ceramic was used as a scaffold. Three experimental groups were prepared, comprised of TCP scaffolds(1) seeded with BMSCs;(2) wrapped with osteogenic matrix cell sheets; or(3) both. Constructs were implanted into a femoral defect model in rats and bone growth was evaluated by radiography, histology, biochemistry, and mechanical testing after 8 wk. RESULTS: In bone defects, constructs implanted with cell sheets showed callus formation with segmentalor continuous bone formation at 8 wk, in contrast to TCP seeded with BMSCs, which resulted in bone nonunion. Wrapping TCP constructs with osteogenic matrix cell sheets increased their osteogenic potential and resulting bone formation, compared with conventional bone tissue engineering TCP scaffolds seeded with BMSCs. The compressive stiffness(mean ± SD) values were 225.0 ± 95.7, 30.0 ± 11.5, and 26.3 ± 10.6 MPa for BMSC/TCP/Sheet constructs with continuous bone formation, BMSC/TCP/Sheet constructs with segmental bone formation, and BMSC/TCP constructs, respectively. The compressive stiffness of BMSC/TCP/Sheet constructs with continuous bone formation was significantly higher than those with segmental bone formation and BMSC/TCP constructs.CONCLUSION: This technique is an improvement over current methods, such as TCP substitution, and is useful for hard tissue reconstruction and inducing earlier bone union in defects.

One-year water-ageing of calcium phosphate composite containing nano-silver and quaternary ammonium to inhibit biofilms

Dental composites are commonly used restorative materials; however, secondary caries due to biofilm acids remains a major problem. The objectives of this study were （1） to develop a composite containing quaternary ammonium dimethacrylate （QADM）, nanoparticles of silver （NAg）, and nanoparticles of amorphous calcium phosphate （NACP）, and （2） to conduct the first investigation of the mechanical properties, biofilm response and acid production vs water-ageing time from 1 day to 12 months. A 4 x 5 design was utilized, with four composites （NACP-QADM composite, NACP-NAg composite, NACP-QADM-NAg composite, and a commercial control composite）, and five water-ageing time periods （1 day, and 3, 6, 9, and 12 months）. After each water- ageing period, the mechanical properties of the resins were measured in a three-point flexure, and antibacterial properties were tested via a dental plaque biofilm model using human saliva as an inoculum. After 12 months of water-ageing, NACP-QADM- NAg had a flexural strength and elastic modulus matching those of the commercial control （P〉 0.1）. Incorporation of QADM or NAg into the NACP composite greatly reduced biofilm viability, metabolic activity and acid production. A composite containing both QADM and NAg possessed a stronger antibacterial capability than one with QADM or NAg alone （P〈0.05）. The anti-biofilm activity was maintained after 12 months of water-ageing and showed no significant decrease with increasing time （P〉0.1）. In conclusion, the NACP-QADM-NAg composite decreased biofilm viability and lactic acid production, while matching the load- bearing capability of a commercial composite. There was no decrease in its antibacterial properties after 1 year of water-ageing. The durable antibacterial and mechanical properties indicate that NACP-QADM-NAg composites may be useful in dental restorations to combat caries.

Absorption Characteristics of Novel Compound Calcium Carbonate Granules:Effects of Gastric Acid Deficiency and Exogenous Weak Acids

Calcium carbonates are commonly administered as supplements for conditions of calcium deficiency.We report here pharmacokinetic characteristics of a novel formulation,calcium carbonate compound granules(CCCGs).forming complexes of calcium carbonate and calcium citrate in water.CCCGs were compared to a kind of commonly?used calcium carbonate preparation(CC)in the market in 5-week-old mice that had been treated with omeprazole,to suppress gastric acid secretion,and in untreated control mice.The results showed that:(1)CCCGs had better water solubility than CC in vitro;(2)In control mice,calcium absorption rates after CCCGs administration were comparable to those after CC administration;(3)Inhibition of gastric acid secretion did not affect calcium absorption after CCCGs,but moderately decreased it after CC;(4)The presence of phytic acid or tannin did not affect calcium absorption rates after CCCGs but did for CC;and(5)In nonnal mice,CCCGs did not inhibit gastric emptying and intestinal propulsion,and did not alter the gastrointestinal honnones.The results suggest that CCCGs may be therapeutically advantageous over more commonly used calcium supplement formulations,particularly for adolescents,because of their stable calcium absorption characteristics and their relatively favorable adverse effect profile.