Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a...Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional(3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium(GLE) method in two-dimensional(2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.展开更多
Detailed investigation of Taprang landslide was carried out in order tounderstand the surface, subsurface lithological information and physicalproperties of soil by using multi-disciplinary methods such as engineering...Detailed investigation of Taprang landslide was carried out in order tounderstand the surface, subsurface lithological information and physicalproperties of soil by using multi-disciplinary methods such as engineeringgeological, geophysical and geotechnical studies for the determinationof factor of safety for slope stability analysis. Geological study wascarried out by detail mapping of surface geology, soil condition, propertiesof bedrock and its discontinuities. The geophysical survey (ElectricalResistivity Tomography-ERT) were carried out to know the electricalresistivity of soil for identifying the groundwater table and slip surface ofthe landslide. Geotechnical analysis such as grain size analysis, liquid limitand direct shear test were carried out in order to evaluate soil classification,moisture content, cohesion and the angle of internal friction of soil forknowing the strength the soil. These soil parameters indicate the soil is verylow strength. The combination of these results were used for calculatingthe factor of safety (FoS) by Limit Equilibrium Method (LEM) proposedby Bishop and Janbu methods. The result of factor of safety in the Tapranglandslide demonstrates that the slope become stable in drained (dry)condition, remain ultimate stage in undrained (wet) condition and finallyfailure occurs if applied the seismic load in both drained and undrainedconditions.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51178402,10902112)Department of Transportation Technology Projects(Grant No.2011318740240)the Fundamental Research Funds for the Central Universities(Grant No.2682014CX074)
文摘Unlike the limit equilibrium method(LEM), with which only the global safety factor of the landslide can be calculated, a local safety factor(LSF) method is proposed to evaluate the stability of different sections of a landslide in this paper. Based on three-dimensional(3D) numerical simulation results, the local safety factor is defined as the ratio of the shear strength of the soil at an element on the slip zone to the shear stress parallel to the sliding direction at that element. The global safety factor of the landslide is defined as the weighted average of all local safety factors based on the area of the slip surface. Some example analyses show that the results computed by the LSF method agree well with those calculated by the General Limit Equilibrium(GLE) method in two-dimensional(2D) models and the distribution of the LSF in the 3D slip zone is consistent with that indicated by the observed deformation pattern of an actual landslide in China.
文摘Detailed investigation of Taprang landslide was carried out in order tounderstand the surface, subsurface lithological information and physicalproperties of soil by using multi-disciplinary methods such as engineeringgeological, geophysical and geotechnical studies for the determinationof factor of safety for slope stability analysis. Geological study wascarried out by detail mapping of surface geology, soil condition, propertiesof bedrock and its discontinuities. The geophysical survey (ElectricalResistivity Tomography-ERT) were carried out to know the electricalresistivity of soil for identifying the groundwater table and slip surface ofthe landslide. Geotechnical analysis such as grain size analysis, liquid limitand direct shear test were carried out in order to evaluate soil classification,moisture content, cohesion and the angle of internal friction of soil forknowing the strength the soil. These soil parameters indicate the soil is verylow strength. The combination of these results were used for calculatingthe factor of safety (FoS) by Limit Equilibrium Method (LEM) proposedby Bishop and Janbu methods. The result of factor of safety in the Tapranglandslide demonstrates that the slope become stable in drained (dry)condition, remain ultimate stage in undrained (wet) condition and finallyfailure occurs if applied the seismic load in both drained and undrainedconditions.
