Effectiveness of inhibitors in increasing chloride threshold value for steel corrosion

This investigation was aimed at evaluating the effectiveness of corrosion inhibitors in increasing the chloride threshold value for steel corrosion. Three types of corrosion inhibitors, calcium nitrite （Ca（NO2）2）, zinc oxide （ZnO）, and N,N＇-dimethylaminoethanol （DMEA）, which respectively represented the anodic inhibitor, cathodic inhibitor, and mixed inhibitor, were chosen. The experiment was carried out in a saturated calcium hydroxide （Ca（OH）2） solution to simulate the electrolytic environment of concrete. The inhibitors were initially mixed at different levels, and then chloride ions were gradually added into the solution in several steps. The open-circuit potential （Ecorr） and corrosion current density （lcorr） determined by electrochemical impedance spectra （EIS） were used to identify the initiation of active corrosion, thereby determining the chloride threshold value. It was found that although all the inhibitors were effective in decreasing the corrosion rate of steel reinforcement, they had a marginal effect on increasing the chloride threshold value.

On Accelerated Singular Value Thresholding Algorithm for Matrix Completion

An accelerated singular value thresholding (SVT) algorithm was introduced for matrix completion in a recent paper [1], which applies an adaptive line search scheme and improves the convergence rate from O(1/N) for SVT to O(1/N2), where N is the number of iterations. In this paper, we show that it is the same as the Nemirovski’s approach, and then modify it to obtain an accelerate Nemirovski’s technique and prove the convergence. Our preliminary computational results are very favorable.

Predicting the Threshold Values based on Diffusion Model of Nitrite Ions in Reinforced Concrete

The prediction model for inhibition effect of reinforced concrete was presented based on the Magge＇s model when the concrete surface was brushed with nitrite solution. The influence of the amount of nitrite solution on inhibiting duration was also discussed through a simulation analysis when the amount of solution were 250 g/m^2, 500 g/m^2, 1000 g/m^2 and 1500 g/m^2, respectively. The experimental results confirm that nitrite ion can diffuse well in concrete to reach an effective mol ratio from the surface of the concrete to the surface of the reinforcement, and has an effective protection for the bars against corrosion. The higher the amount of solution, the better it will accelerate getting the threshold value of mol ratio on the surface of rebar, and retarding the time for loosing the effective threshold value of mol ratio. It helps to increase the tendency of inhibiting duration and prolong the life of reinforced concrete. The nitrite solution amount is used to predict the corrosion inhibiting duration of concrete that contains chloride salt.

THRESHOLD VALUE FOR DIAGNOSIS OF CHAOTIC NATURE OF THE DATA OBTAINED IN NONLINEAR DYNAMIC ANALYSIS

In this paper surrogate data method of phase-randomized is proposed to identify the random or chaotic nature of the data obtained in dynamic analysis: The calculating results validate the phase-randomized method to be useful as it can increase the extent of accuracy of the results. And the calculating results show that threshold values of the random timeseries and nonlinear chaotic timeseries have marked difference.

The Effect of a High-Frequency-Hearing-Threshold Weighted Value on the Diagnosis of Occupational-Noise-Induced Deafness

Objective: In order to provide a theoretical basis for the revision of the current diagnostic criteria for occupational noise-induced deafness (ONID), we evaluated the degree of ONID by analyzing different high-frequency-hearing- threshold-weighted values (HFTWVs). Methods: A retrospective study was conducted to evaluate the diagnosis of patients with ONID from January 2016 to January 2017 in Guangdong province, China. Based on 3 hearing tests (each interval between the tests was greater than 3 days), the minimum threshold value of each frequency was obtained using the 2007 edition’s diagnostic criteria for ONID. The speech frequency and the HFTWVs were analyzed based on age, noise exposure, and diagnostic classi-fication using SPSS21.0. Results: 168 patients in total were involved in this study, 154 males and 14 females, and the average age was 41.18 ± 6.07. The diagnosis rate was increased by the weighted value of the high frequencies and was more than the mean value of the pure speech frequency (MVPSF). The diagnosis rate for the weighted 4 kHz frequency level increased by 13.69% (χ2 = 9.880, P = 0.002), the weighted 6 kHz level increased by 15.47% (χ2 = 9.985, P = 0.002), and the weighted 4 kHz + 6 kHz level increased by 15.47% (χ2 = 9.985, P = 0.002). The differences were all statistically significant. The diagnostic rate of the different thresholds showed no obvious difference between the genders. The age groups were divided into less than or equal to 40 years old (group A) and 40 - 50 years old (group B). There were several groups with a high frequency: high frequency weighted 4 kHz ( group A χ2 = 3.380, P = 0.050;group B χ2 = 4.054, P = 0.032), high frequency weighted 6 kHz (group A χ2 = 6.362, P = 0.012;group B χ2 = 4.054, P = 0.032), weighted 4 kHz + 6 kHz (group A χ2 = 6.362 P = 0.012;B χ2 = 4.054, P = 0.032) than those of MVPSF in the same group on ONID diagnosis rate. The differences between the groups were statistically significant. There was no significant difference between the age groups (χ2 = 2.265, P = 0.944). The better ear’s (the smaller hearing threshold weighted value) MVPSF and the weighted values for the different high frequencies were examined in light of the number of working years;the group that was exposed to noise for more than 10 years had significantly higher values than those of the average thresholds of each frequency band in the groups with 3 - 5 years of exposure (F = 2.271, P = 0.001) and 6 - 10 years of exposure (F = 1.563, P = 0.046). The differences were statistically significant. The different HFTWVs were higher than those of the MVPSF values, and the high frequency weighted 4 kHz + 6 kHz level showed the greatest difference, with an average increase of 2.83 dB. The diagnostic rate that included the weighted high frequency values was higher for the mild, moderate, and severe cases than those patients who were only screened with the pure frequency tests. The results of the comparisons of the diagnosis rates for mild ONID were as follows: the weighted 3 kHz high frequency level (χ2 = 3.117, P = 0.077) had no significant difference, but the weighted 4 kHz level (χ2 = 10.835, P = 0.001), 6 kHz level (χ2 = 9.985, P = 0.002), 3 kHz + 4 kHz level (χ2 = 6.315, P = 0.012), 3 kHz + 6 kHz level (χ2 = 6.315, P = 0.012), 4 kHz + 6 kHz level (χ2 = 9.985, P = 0.002), and 3 kHz + 4 kHz + 6 kHz level (χ2 = 7.667, P = 0.002) were significantly higher than the diagnosis rate of the mean value of the PSF. There was no significant difference between the 2 groups for the moderate and severe grades (P > 0.05). Conclusion: Different HFTWVs increase the diagnostic rate of ONID. The weighted 4 kHz, 6 kHz, and 4 kHz + 6 kHz high frequency values greatly affected the diagnostic results, and the weighted 4 kHz + 6 kHz high frequency hearing threshold value has the maximum the effect on the ONID diagnosis results.

Optimized quantum singular value thresholding algorithm based on a hybrid quantum computer

Quantum singular value thresholding(QSVT) algorithm,as a core module of many mathematical models,seeks the singular values of a sparse and low rank matrix exceeding a threshold and their associated singular vectors.The existing all-qubit QSVT algorithm demands lots of ancillary qubits,remaining a huge challenge for realization on nearterm intermediate-scale quantum computers.In this paper,we propose a hybrid QSVT(HQSVT) algorithm utilizing both discrete variables(DVs) and continuous variables(CVs).In our algorithm,raw data vectors are encoded into a qubit system and the following data processing is fulfilled by hybrid quantum operations.Our algorithm requires O [log(MN)] qubits with0(1) qumodes and totally performs 0(1) operations,which significantly reduces the space and runtime consumption.

DWT-SVD Based Image Steganography Using Threshold Value Encryption Method

Digital image steganography technique based on hiding the secret data behind of cover image in such a way that it is not detected by the human visual system.This paper presents an image scrambling method that is very useful for grayscale secret images.In this method,the secret image decomposes in three parts based on the pixel’s threshold value.The division of the color image into three parts is very easy based on the color channel but in the grayscale image,it is difficult to implement.The proposed image scrambling method is implemented in image steganography using discrete wavelet transform(DWT),singular value decomposition(SVD),and sorting function.There is no visual difference between the stego image and the cover image.The extracted secret image is also similar to the original secret image.The proposed algorithm outcome is compared with the existed image steganography techniques.The comparative results show the strength of the proposed technique.

Efficient Global Threshold Vector Outlyingness Ratio Filter for the Removal of Random Valued Impulse Noise

This research paper proposes a filter to remove Random Valued Impulse Noise (RVIN) based on Global Threshold Vector Outlyingness Ratio (GTVOR) that is applicable for real time image processing. This filter works with the algorithm that breaks the images into various decomposition levels using Discrete Wavelet Transform (DWT) and searches for the noisy pixels using the outlyingness of the pixel. This algorithm has the capability of differentiating high frequency pixels and the “noisy pixel” using the threshold as well as window adjustments. The damage and the loss of information are prevented by means of interior mining. This global threshold based algorithm uses different thresholds for different quadrants of DWT and thus helps in recovery of noisy image even if it is 90% affected. Experimental results exhibit that this method outperforms other existing methods for accurate noise detection and removal, at the same time chain of connectivity is not lost.

Main Principles and Methods of Identification of High Conservation Value Forests in the Conditions of Mountainous Relief： Case of Armenia

Armenia is a small mountainous country with remarkable biodiversity. The forest cover of Armenia makes up 11.17% of the total territory of Armenia. The forests of Armenia make important habitat for numerous biological objects. They also provide important ecosystem services, including key services to forest adjacent population. Deforestation and forest degradation are serious threats in Armenia. In the result of special studies the principles and criteria for identification of HCVFs （high conservation value forests） in the conditions of Armenia were developed. They are based on the guidelines for identification and management of HCVFs, but adapted to the conditions of mountainous forests of Armenia as a small country. Out of six generic types of HCVFs, it is suggested to define five types of HCVFs with respective sub-types. Proper protection of such forests shall ensure conservation of biological diversity and maintenance of ecosystem services provided by forests.

A More Effective Method of Extracting the Characteristic Value of Pulse Wave Signal Based on Wavelet Transform

Pulse wave contains human physiological and pathological information. Different people will exhibit different characteristics, and hence determining the characteristic points of the pulse wave of human physiological health makes sense. It is common that we extract the characteristic value of pulse wave signal with the method based on wavelet transform on a small scale, and then determine the locations of the characteristic points by modulus maxima and modulus minima. Before determining characteristic value by detecting modulus maxima and modulus minima, we need to determine every period of the pulse wave. This paper presents a new kind of adaptive threshold determination method which is more effective. It can accurately determine every period of the pulse wave, and then extract characteristic values by modulus maxima and modulus minima in every period of the pulse wave. The method presented in this paper promotes the research utilizing pulse wave on health life.

Analysis of Network Traffic with Extreme Value Theory

It is very im portant to analyze network traffic in the network control and management. In thi s paper, extreme value theory is first introduced and a model with threshold met hods is proposed to analyze the characteristics of network traffic. In this mode l, only some traffic data that is greater than threshold value is considered. Th en the proposed model with the trace is simulated by using S Plus software. The modeling results show the network traffic model constructed from the extreme va lue theory fits well with that of empirical distribution. Finally, the extreme v alue model with the FARIMA(p,d,q) modeling is compared. The anal ytical results illustrate that extreme value theory has a good application foreg round in the statistic analysis of network traffic. In addition, since only some traffic data which is greater than the threshold is processed, the computation overhead is reduced greatly.

Application of Extreme Value Theory to Generation and Analysis of Pseudorandom Samples

The article deals with the methodology of pseudorandom data analysis. As a mathematical tool for carrying out the research the extreme value theory was used that creates one of the directions in mathematical statistics, and is related to investigating the extreme deviations from the median values in probability distributions. Also, the methods for estimating unknown parameters and algorithm of random-number generation are discussed. The models of treatment the extreme values are constructed which are based on machine generated sample and approach is proposed for their future application for constructing forecasting models.

Alarm Correlation Rules Generation Algorithm Based on Confidence Covered Value

In communication alarm correlation analysis,traditional association rules generation(ARG) algorithm usually has low efficiency and high error rate.This paper proposes an alarm correlation rules generation algorithm based on the confidence covered value.Confidence covered value method can judge whether a rule is redundant or not scientific After the rules that based on weighted frequent patterns(WFPs) generated,the association rules were deleted by the confidence covered value,in order to delete the redundant rules and keep the rules with more information.Experiments show that the alarm correlation rules generation algorithm based on the confidence covered value has higher efficiency than the traditional method,and can effectively remove redundant rules.Thus it is very suitable for telecommunication alarm association rules processing.

Scales,methods and technical analysis of China's residential environment evaluation

To improve China＇s residential environment evaluation system and enhance its guiding role, current research results are analyzed and summarized from three aspects including research scales, evaluation methods and applied technology by means of comparison, induction and empirical application. The guiding role of the current macro-scale evaluation system of urban planning and construction is generally not obvious, whereas the guiding role of medium and micro-scale systems to the improvement of residential environments is improving. There are diversified methods for determining the threshold values and the weights of indices in China＇s evaluation system. For instance, the analytic hierarchy process（AHP） method is adopted to determine the weights of indices. The advantages and disadvantages of the method are analyzed on the basis of empirical calculation. In the course of comprehensive analyses, a nonlinear model can reflect interactions among indices more than a linear model; the evaluation model under the ARCGIS platform prevails since it combines space and attribute, and it has intuitive results. So far, the methodological system of China＇s residential environment evaluation has not been established; its subject coverage and research category should be expanded, and its guiding role should be enhanced.

Novel Method to Determine the Image Segmentation Threshold during the Quantitative Test on Meso-structure of Geo-material

As a kind of special material in geotechnical engineering, the mudded weak interlayer plays a crucial part in slope stability. In this paper, we presented a method to determine the threshold value of section micrographs of the mudded weak interlayer in slope during its meso-structure qualification process. Some soil tests, scanning electron microscopy（SEM） and image segmentation technology were performed to fulfill our purpose. Specifically, the relation between 3 D-porosity and the threshold was obtained by least square fitting of the threshold-porosity curves and a simplified pore equivalent model. Using this relation and the 3 D-porosity determined by soil experiments, we can figure out the polynomial equation of the threshold value. The threshold values obtained by the other existing methods in literature were employed to validate our present results.

Optimal Threshold Determination for the Maximum Product of Spacing Methodology with Ties for Extreme Events

Extreme events are defined as values of the event below or above a certain value called threshold. A well chosen threshold helps to identify the extreme levels. Several methods have been used to determine threshold so as to analyze and model extreme events. One of the most successful methods is the maximum product of spacing (MPS). However, there is a problem encountered while modeling data through this method in that the method breaks down when there is a tie in the exceedances. This study offers a solution to model data even if it contains ties. To do so, an optimal threshold that gives more optimal parameters for extreme events, was determined. The study achieved its main objective by deriving a method that improved MPS method for determining an optimal threshold for extreme values in a data set containing ties, estimated the Generalized Pareto Distribution (GPD) parameters for the optimal threshold derived and compared these GPD parameters with GPD parameters determined through the standard MPS model. The study improved maximum product of spacing method and used Generalized Pareto Distribution (GPD) and Peak over threshold (POT) methods as the basis of identifying extreme values. This study will help the statisticians in different sectors of our economy to model extreme events involving ties. To statisticians, the structure of the extreme levels which exist in the tails of the ordinary distributions is very important in analyzing, predicting and forecasting the likelihood of an occurrence of the extreme event.

MICROFRACTOGRAPHY OF NEAR-THRESHOLD FATIGUE CRACK PROPAGATION IN DUAL-PHASE STEELS

SEM microfractography of near-threshold fatigue crack propagation were carried out in the dual-phase steels of 3 martensite morphologies and 6 volume fractions of martensite (V_m). All of them are featured by cyclic cleavage characteristics in near-threshold region,i.e.,main- ly controlled by mode Ⅱ stress.In the higher ΔK regions,the fracture surfaces are character- ized by mixed modes including cyclic cleavage facets,two types of secondary cracks and striations,etc..The roughness-induced crack closure of fracture surface is attributed primarily to extreme high fatigue crack growth threshold values.

Optimal Threshold Determination for Securities Exchange Volumes Using Improved Maximum Product of Spacing Methodology

To Statisticians, the structure of the extreme levels which exist in the tails of the ordinary distributions is very important in analyzing, predicting and forecasting the likelihood of an occurrence of extreme event. Extreme events are defined as values of the event below or above a certain value called threshold. A well chosen threshold helps to identify the extreme levels. Several methods have been used to determine threshold so as to analyze and model extreme events. One of the most successful methods is the maximum product of spacing (MPS). However, there is a problem encountered while modeling data through this method in that the method breaks down when there is a tie in the exceedances. This study offers a solution to model data even when it contains ties. In the study, a method that improved MPS method for determining an optimal threshold for extreme values in a data set containing ties was derived. The Generalized Pareto Distribution (GPD) parameters for the optimal threshold were derived and compared to GPD parameters determined through the standard MPS model. The study improved the standard MPS methodology by introducing the concept of frequency and used Generalized Pareto Distribution (GPD) and Peak over threshold (POT) methods as the basis of identifying extreme values. The improved MPS models and the standard models were applied to Nairobi Securities Exchange (NSE) trading volume data to determine the GPD parameters for different sectors registered in NSE market and their performance compared. It was realized that the improved MPS model performed better than the standard models. This study will help the Statisticians in different sectors of our economy to model extreme events involving ties.

Simulation Models for Evaluation and Selection of Depreciation Policy for Agricultural Companies in the Republic of Bulgaria

In the present paper, the results from research on the influence of criteria （factors） such as depreciation method, materiality threshold, and inflation rate on the selection of depreciation policy are shown. The research has been carried out with the help of specifically devised simulation models. The simulation is realized in accounting for the unevenness of money in time and the profitability of the company, the tax rates for corporate tax, and the inflation rate. The models have been devised after analyzing methodology issues, related to depreciation policy and investigating current practices in its implementation in specific agricultural companies in present-day Bulgaria. It has been determined that there is a clear-cut relation between the profitability of the companies and the materiality threshold and depreciation method chosen. The main conclusion is that when the companies develop their depreciation policy, at ceteris paribus they should select higher materiality thresholds and diminishing balance depreciation methods due to the inequality of money in time, the acceleration of obsolescence, and the inflation processes.

流域水生态环境补偿研究进展

围绕补偿机制、控制阈值、标准与价值3个维度梳理了流域水生态环境补偿国内外研究成果。流域补偿问题需要突破单一水量或水质控制因素的限制,兼顾水污染与水生态两方面,建立水质与水量阈值联合控制下的流域水生态环境补偿机制架构;补偿标准需要实现实际价格到经济价格,再到与生态经济价格的属性叠加与内涵拓展。提出未来应在点面结合的多源河流水环境损害补偿控制阈值、考虑河流生态系统服务功能的生态水量补偿控制阈值、水质与水量相互作用机理与双控演化博弈下多模式补偿策略等方面开展进一步的探索研究。