A 9 - 10.6 GHz Microstrip Antenna—UWB Low Noise Amplifier with Differential Noise Canceling Technique for IoT Applications

An ultra-wide band (UWB) receiver front-end that operates at the UWB frequency range, starting from 9 GHz - 10.6 GHz is proposed in this paper. The proposed system consists of an off-chip microstrip antenna and CMOS differential low noise amplifier with a differential noise canceling (DNC) technique. The proposed antenna is trapezoidal dipole shaped with balun and printed on a low-cost FR4 substrate with dimensions 10 × 10 × 0.8 mm3. The balun circuit integrated with the ground antenna to improve the antenna impedance matching. Noise canceling is obtained by using a differential block with each stage having 2 amplifiers that generate differential signals, subtracted to improve total noise performance. The proposed DNC block improves NF by 50% while increasing total power consumption with only 0.1 Mw. The differential CMOS cascode LNA with DNC block is implemented using UMC 0.13 μm CMOS process, exhibits a flat gain of 19 dB, maximum noise figure of 2.75 dB, 1 dB compression point −16 dBm and 3rd order intercept point (IIP3) −10 dBm. The proposed system has total DC power consumption of 2.8 mW at 1.2 V power supply.

Ultrasonic detection of interface in multilayers: Theory and adaptive noise canceling

The analytic expression of the received echo in multilayers NDT (Non-Destruction Evaluation) is derived. Then based on the analytic solution, interface signals are analyzed; and it is concluded that the received ultrasonic echo of mulilayers is composed of all the interface signals. By using the adaptive canceling of the signals from interfaces 0 and 1, the signals from interface 2 can be extracted. The method is applied to simulated and real echoes of multilayers,and the signals from interface 2 is separated successfully Based on the amplitude and arrival time of the signal from interface 2, the bond quality and depth of the interface can be evaluated

Off-Grid Compressed Channel Estimation with Parallel Interference Cancellation for Millimeter Wave Massive MIMO

Millimeter wave(mmWave)massive multiple-input multiple-output(MIMO)plays an important role in the fifth-generation(5G)mobile communications and beyond wireless communication systems owing to its potential of high capacity.However,channel estimation has become very challenging due to the use of massive MIMO antenna array.Fortunately,the mmWave channel has strong sparsity in the spatial angle domain,and the compressed sensing technology can be used to convert the original channel matrix into the sparse matrix of discrete angle grid.Thus the high-dimensional channel matrix estimation is transformed into a sparse recovery problem with greatly reduced computational complexity.However,the path angle in the actual scene appears randomly and is unlikely to be completely located on the quantization angle grid,thus leading to the problem of power leakage.Moreover,multiple paths with the random distribution of angles will bring about serious interpath interference and further deteriorate the performance of channel estimation.To address these off-grid issues,we propose a parallel interference cancellation assisted multi-grid matching pursuit(PIC-MGMP)algorithm in this paper.The proposed algorithm consists of three stages,including coarse estimation,refined estimation,and inter-path cyclic iterative inter-ference cancellation.More specifically,the angular resolution can be improved by locally refining the grid to reduce power leakage,while the inter-path interference is eliminated by parallel interference cancellation(PIC),and the two together improve the estimation accuracy.Simulation results show that compared with the traditional orthogonal matching pursuit(OMP)algorithm,the normalized mean square error(NMSE)of the proposed algorithm decreases by over 14dB in the case of 2 paths.

Coherent optical frequency transfer via 972-km fiber link

We demonstrate coherent optical frequency dissemination over a distance of 972 km by cascading two spans where the phase noise is passively compensated for.Instead of employing a phase discriminator and a phase locking loop in the conventional active phase control scheme,the passive phase noise cancellation is realized by feeding double-trip beat-note frequency to the driver of the acoustic optical modulator at the local site.This passive scheme exhibits fine robustness and reliability,making it suitable for long-distance and noisy fiber links.An optical regeneration station is used in the link for signal amplification and cascaded transmission.The phase noise cancellation and transfer instability of the 972-km link is investigated,and transfer instability of 1.1×10^(-19)at 10^(4)s is achieved.This work provides a promising method for realizing optical frequency distribution over thousands of kilometers by using fiber links.

A low-profile metamaterial absorber with ultrawideband reflectionless and wide-angular stability

An ultrawideband reflectionless metamaterial absorber(MA)is proposed by replacing the metallic ground with the complementary split-ring resonator(CSRR)structure.The proposed MA exhibits-10 d B reflectivity spectrum from 1 GHz to 20 GHz,which maintains more than 90%absorption from 1.5 GHz to20 GHz.Furthermore,it achieves angle stability for TE and TM polarization at oblique incident angles up to 40°and 65°,respectively.To achieve broadband absorption spectrum,we have adopted a single-layer high-impedance surface(HIS)loaded with a double-layer magnetic material(MM)structure.To further realize the RCS reduction into a lower frequency range,we have employed the scattering cancellation technology into the traditional metallic ground.Finally,we have fabricated a sample exhibiting the 10 d B RCS reduction from 1 GHz to 20 GHz with a thickness of 10 mm.Measurement and simulation results confirm that the proposed MA exhibits excellent comprehensive performance,making it suitable for many practical applications.

Turbo Message Passing Based Burst Interference Cancellation for Data Detection in Massive MIMO-OFDM Systems

This paper investigates the fundamental data detection problem with burst interference in massive multiple-input multiple-output orthogonal frequency division multiplexing(MIMO-OFDM) systems. In particular, burst interference may occur only on data symbols but not on pilot symbols, which means that interference information cannot be premeasured. To cancel the burst interference, we first revisit the uplink multi-user system and develop a matrixform system model, where the covariance pattern and the low-rank property of the interference matrix is discussed. Then, we propose a turbo message passing based burst interference cancellation(TMP-BIC) algorithm to solve the data detection problem, where the constellation information of target data is fully exploited to refine its estimate. Furthermore, in the TMP-BIC algorithm, we design one module to cope with the interference matrix by exploiting its lowrank property. Numerical results demonstrate that the proposed algorithm can effectively mitigate the adverse effects of burst interference and approach the interference-free bound.

Active Cancelation of Acoustic Noise in Waveguides by Standard Control Task Decision Usage

Cybernetic decision variants were analyzed in order to use for physical task of active noise cancelation. 10 dB mean active noise cancellation is demonstrated in two decades frequency band by usage of cybernetic decision for acoustical duct physical scale model. The used decision was found on minimization of acoustical field power transfer function from the beginning of waveguide to their end.

A 0.18μm CMOS inductorless complementary-noise-canceling-LNA for TV tuner applications

This paper presents an inductorless complementary-noise-canceling LNA （CNCLNA） for TV tuners. The CNCLNA exploits single-to-differential topology, which consists of a common gate stage and a common source stage. The complementary topology can save power and improve the noise figure. Linearity is also enhanced by employing a multiple gated transistors technique. The chip is implemented in SMIC 0.18 μm CMOS technology. Measurement shows that the proposed CNCLNA achieves 13.5-16 dB voltage gain from 50 to 860 MHz, the noise figure is below 4.5 dB and has a minimum value of 2.9 dB, and the best PIdB is -7.5 dBm at 860 MHz. The core consumes 6 mA current with a supply voltage of 1.8 V, while the core area is only 0.2 ×0.2 mm2.

Guangxi Canceling Preferential Power Price for High Energy Consumption Including Aluminum Enterprises

Guangxi has carried out the policy of differen- tiated power price earnestly.At the end of 2007,the price bureau of the autonomous re- gion has unveiled the policy of the cancellation of preferential electricity price for high energy consumption enterprises.

A Golden Decade of Polar Codes:From Basic Principle to 5G Applications

After the pursuit of seventy years,the invention of polar codes indicates that we have found the first capacity-achieving coding with low complexity construction and decoding,which is the great breakthrough of the coding theory in the past two decades.In this survey,we retrospect the history of polar codes and summarize the advancement in the past ten years.First,the primary principle of channel polarization is investigated such that the basic construction,coding method and the classic successive cancellation(SC)decoding are reviewed.Second,in order to improve the performance of the finite code length,we introduce the guiding principle and conclude five design criteria for the construction,design and implementation of the polar code in the practical communication system based on the exemplar schemes in the literature.Especially,we explain the design principle behind the concatenated coding and rate matching of polar codes in 5G wireless system.Furthermore,the improved SC decoding algorithms,such as SC list(SCL)decoding and SC stack(SCS)decoding etc.,are investigated and compared.Finally,the research prospects of polar codes for the future 6G communication system are explored,including the optimization of short polar codes,coding construction in fading channels,polar coded modulation and HARQ,and the polar coded transmission,namely polar processing.Predictably,as a new coding methodology,polar codes will shine a light on communication theory and unveil a revolution in transmission technology.

Deep Learning Aided SCL Decoding of Polar Codes with Shifted-Pruning

Recently,a generalized successive cancellation list(SCL)decoder implemented with shiftedpruning(SP)scheme,namely the SCL-SP-ωdecoder,is presented for polar codes,which is able to shift the pruning window at mostωtimes during each SCL re-decoding attempt to prevent the correct path from being eliminated.The candidate positions for applying the SP scheme are selected by a shifting metric based on the probability that the elimination occurs.However,the number of exponential/logarithm operations involved in the SCL-SP-ωdecoder grows linearly with the number of information bits and list size,which leads to high computational complexity.In this paper,we present a detailed analysis of the SCL-SP-ωdecoder in terms of the decoding performance and complexity,which unveils that the choice of the shifting metric is essential for improving the decoding performance and reducing the re-decoding attempts simultaneously.Then,we introduce a simplified metric derived from the path metric(PM)domain,and a custom-tailored deep learning(DL)network is further designed to enhance the efficiency of the proposed simplified metric.The proposed metrics are both free of transcendental functions and hence,are more hardware-friendly than the existing metrics.Simulation results show that the proposed DL-aided metric provides the best error correction performance as comparison with the state of the art.

Modeling Target Detection and Performance Analysis of Electronic Countermeasures for Phased Radar

Interference is a key factor in radar return misdetection.Strong interference might make it difficult to detect the signal or targets.When interference occurs in the sidelobes of the antenna pattern,Sidelobe Cancellation(SLC)and Sidelobe Blanking are two unique solutions to solve this problem(SLB).Aside from this approach,the probability of false alert and likelihood of detection are the most essential parameters in radar.The chance of a false alarm for any radar system should be minimal,and as a result,the probability of detection should be high.There are several interference cancellation strategies in the literature that are used to sustain consistent false alarms regardless of the clutter environment.With the necessity for interference cancellation methods and the constant false alarm rate(CFAR),the Maisel SLC algorithm has been modified to create a new algorithm for recognizing targets in the presence of severe interference.The received radar returns and interference are simulated as non-stationary in this approach,and side-lobe interference is cancelled using an adaptive algorithm.By comparing the performance of adaptive algorithms,simulation results are shown.In a severe clutter situation,the simulation results demonstrate a considerable increase in target recognition and signal to noise ratio when compared to the previous technique.

List-Serial Pipelined Hardware Architecture for SCL Decoding of Polar Codes

For polar codes,the performance of successive cancellation list(SCL)decoding is capable of approaching that of maximum likelihood decoding.However,the existing hardware architectures for the SCL decoding suffer from high hardware complexity due to calculating L decoding paths simultaneously,which are unfriendly to the devices with limited logical resources,such as field programmable gate arrays(FPGAs).In this paper,we propose a list-serial pipelined hardware architecture with low complexity for the SCL decoding,where the serial calculation and the pipelined operation are elegantly combined to strike a balance between the complexity and the latency.Moreover,we employ only one successive cancellation(SC)decoder core without L×L crossbars,and reduce the number of inputs of the metric sorter from 2L to L+2.Finally,the FPGA implementations show that the hardware resource consumption is significantly reduced with negligible decoding performance loss.

Group-Based Successive Interference Cancellation for Multi-Antenna NOMA System with Error Propagation

Non-orthogonal multiple access(NOMA)is viewed as a key technique to improve the spectrum efficiency and solve the issue of massive connectivity.However,for power domain NOMA,the required overall transmit power should be increased rapidly with the increasing number of users in order to ensure that the signal-to-interference-plus-noise ratio reaches a predefined threshold.In addition,since the successive interference cancellation(SIC)is adopted,the error propagation would become more serious as the order of SIC increases.Aiming at minimizing the total transmit power and satisfying each user’s service requirement,this paper proposes a novel framework with group-based SIC for the deep integration between power domain NOMA and multi-antenna technology.Based on the proposed framework,a joint optimization of power control and equalizer design is investigated to minimize transmit power consumption for uplink multi-antenna NOMA system with error propagations.Based on the relationship between the equalizer and the transmit power coefficients,the original problem is transformed to a transmit power optimization problem,which is further addressed by a parallel iteration algorithm.It is shown by simulations that,in terms of the total power consumption,the proposed scheme outperforms the conventional OMA and the existing cluster-based NOMA schemes.

Optical Ciphering Scheme for Cancellable Speaker Identification System

Most current security and authentication systems are based on personal biometrics.The security problem is a major issue in the field of biometric systems.This is due to the use in databases of the original biometrics.Then biometrics will forever be lost if these databases are attacked.Protecting privacy is the most important goal of cancelable biometrics.In order to protect privacy,therefore,cancelable biometrics should be non-invertible in such a way that no information can be inverted from the cancelable biometric templates stored in personal identification/verification databases.One methodology to achieve non-invertibility is the employment of non-invertible transforms.This work suggests an encryption process for cancellable speaker identification using a hybrid encryption system.This system includes the 3D Jigsaw transforms and Fractional Fourier Transform(FrFT).The proposed scheme is compared with the optical Double Random Phase Encoding(DRPE)encryption process.The evaluation of simulation results of cancellable biometrics shows that the algorithm proposed is secure,authoritative,and feasible.The encryption and cancelability effects are good and reveal good performance.Also,it introduces recommended security and robustness levels for its utilization for achieving efficient cancellable biometrics systems.

Efficient Hardware Design of a Secure Cancellable Biometric Cryptosystem

Biometric security is a growing trend,as it supports the authentication of persons using confidential biometric data.Most of the transmitted data in multi-media systems are susceptible to attacks,which affect the security of these sys-tems.Biometric systems provide sufficient protection and privacy for users.The recently-introduced cancellable biometric recognition systems have not been investigated in the presence of different types of attacks.In addition,they have not been studied on different and large biometric datasets.Another point that deserves consideration is the hardware implementation of cancellable biometric recognition systems.This paper presents a suggested hybrid cancellable biometric recognition system based on a 3D chaotic cryptosystem.The rationale behind the utilization of the 3D chaotic cryptosystem is to guarantee strong encryption of biometric templates,and hence enhance the security and privacy of users.The suggested cryptosystem adds significant permutation and diffusion to the encrypted biometric templates.We introduce some sort of attack analysis in this paper to prove the robustness of the proposed cryptosystem against attacks.In addition,a Field Programmable Gate Array(FPGA)implementation of the pro-posed system is introduced.The obtained results with the proposed cryptosystem are compared with those of the traditional encryption schemes,such as Double Random Phase Encoding(DRPE)to reveal superiority,and hence high recogni-tion performance of the proposed cancellable biometric recognition system.The obtained results prove that the proposed cryptosystem enhances the security and leads to better efficiency of the cancellable biometric recognition system in the presence of different types of attacks.

Intelligent reflecting surface-assisted cognitive radio-inspired rate-splitting multiple access systems

Intelligent reflecting surface(IRS)has been widely regarded as a promising technology for configuring wireless propagation environments.In this paper,we utilize IRS to assist transmission of a secondary user(SU)in a cognitive radio-inspired rate-splitting multiple access(CR-RSMA)system in which a primary user's(PU's)quality of service(QoS)requirements must be guaranteed.Without introducing intolerable interference to deteriorate the PU's outage performance,the SU conducts rate-splitting to transmit its signal to the base-station through the direct link and IRS reflecting channels.For the IRS-assisted CR-RSMA(IRS-CR-RSMA)scheme,we derive the optimal transmit power allocation,target rate allocation,and successive interference cancellation decoding order to enhance the outage performance of the SU.The closed-form expression for the SU's outage probability achieved by the IRS-CR-RSMA scheme is derived.Various simulation results are presented to clarify the enhanced outage performance achieved by the proposed IRS-CR-RSMA scheme over the CR-RSMA scheme.

Face Templates Encryption Technique Based on Random Projection and Deep Learning

Cancellable biometrics is the solution for the trade-off between two concepts:Biometrics for Security and Security for Biometrics.The cancelable template is stored in the authentication system’s database rather than the original biometric data.In case of the database is compromised,it is easy for the template to be canceled and regenerated from the same biometric data.Recoverability of the cancelable template comes from the diversity of the cancelable transformation parameters(cancelable key).Therefore,the cancelable key must be secret to be used in the system authentication process as a second authentication factor in con-junction with the biometric data.The main contribution of this paper is to tackle the risks of stolen/lost/shared cancelable keys by using biometric trait(in different feature domains)as the only authentication factor,in addition to achieving good performance with high security.The standard Generative Adversarial Network(GAN)is proposed as an encryption tool that needs the cancelable key during the training phase,and the testing phase depends only on the biometric trait.Additionally,random projection transformation is employed to increase the proposed system’s security and performance.The proposed transformation system is tested using the standard ORL face database,and the experiments are done by applying different features domains.Moreover,a security analysis for the proposed transformation system is presented.

Standardization of apple cancellation test for neglect patients in Korea:An observational study

BACKGROUND Neglect can be divided into two types using apple cancellation test(apple test):Egocentric neglect(EN)and allocentric neglect(AN).However,in South Korea,apple test results and decision criteria are still largely dependent on tests by foreign countries.AIM To establish a new South Korea standard and improve the accuracy of neglect assessment,the apple experiment was standardized in this study.METHODS This study was conducted on 223 healthy subjects for a total of 7 mo from August 2021 to February 2022.Standardization was carried out using the original apple test developed by Bickerton in 2011.In scoring for the apple test,total omission error refers to the number of missed targets(full apple)in the entire test sheet(left,middle,and right area).The score for EN is the difference between the correct number of right area and the correct number of left area(excluding the middle area).For AN,the score is difference between the number of left opening apples and number of right opening apples(including the middle area).Linear regression analysis was used for standardization using the general characteristics of subjects and the results of the apple test.RESULTS The cut-off score,which is the standard value indicating the pathological condition by combining the results of all subjects,is as follows:Total omission error(5),error for EN(2),and error for AN(2).Also,differences in cut-off score according to age were found.CONCLUSION This study will be helpful in facilitating a more accurate differential diagnosis of neglect.

Advanced surface coil layout with intrinsic noise cancellation properties for surface-NMR applications

A recent study demonstrated that in small-scale prepolarized surface nuclear magnetic resonance(SNMR-PP)measurements with a footprint of a few square meters,customized PP switch-off ramps can serve as an efficient excitation mechanism,eliminating the requirement for a conventional oscillating excitation pulse.This approach enables the detection of short relaxation signals from the unsaturated soil zone and can,therefore,be used to directly provide soil moisture and pore geometry information.Because ultimately such small-scale SNMR-PP setups are intended for a mobile application,it is necessary to develop strategies that allow for speedy measurement progress and do not require noise cancellation protocols based on reference stations.Hence,we developed a new concentric figure-of-eight(cFOE)loop layout that combines the direction independence of a circular loop with the intrinsic noise cancellation properties of a classical FOE-loop.This approach significantly decreases the measurement time because suitable signal-to-noise ratios are reached much faster compared to a classical circular loop and will bring us one step further toward fast and non-invasive soil moisture mapping applications.