MOF-derived porous graphitic carbon with optimized plateau capacity and rate capability for high performance lithium-ion capacitors

The development of anode materials with high rate capability and long charge-discharge plateau is the key to improve per-formance of lithium-ion capacitors(LICs).Herein,the porous graphitic carbon(PGC-1300)derived from a new triply interpenetrated co-balt metal-organic framework(Co-MOF)was prepared through the facile and robust carbonization at 1300°C and washing by HCl solu-tion.The as-prepared PGC-1300 featured an optimized graphitization degree and porous framework,which not only contributes to high plateau capacity(105.0 mAh·g^(−1)below 0.2 V at 0.05 A·g^(−1)),but also supplies more convenient pathways for ions and increases the rate capability(128.5 mAh·g^(−1)at 3.2 A·g^(−1)).According to the kinetics analyses,it can be found that diffusion regulated surface induced capa-citive process and Li-ions intercalation process are coexisted for lithium-ion storage.Additionally,LIC PGC-1300//AC constructed with pre-lithiated PGC-1300 anode and activated carbon(AC)cathode exhibited an increased energy density of 102.8 Wh·kg^(−1),a power dens-ity of 6017.1 W·kg^(−1),together with the excellent cyclic stability(91.6%retention after 10000 cycles at 1.0 A·g^(−1)).

Pyridinic nitrogen enriched porous carbon derived from bimetal organic frameworks for high capacity zinc ion hybrid capacitors with remarkable rate capability

Aqueous zinc ion hybrid capacitors(ZIHCs)hold great potential for large-scale energy storage applications owing to their high safety and low cost,but suffer from low capacity and energy density.Herein,pyridinic nitrogen enriched porous carbon(nPC)was successfully synthesized via the growth,subsequent annealing and acid etching of bimetal organic frameworks for high capacity and safe ZIHCs with exceptional rate capability.Benefiting from the mesopores for easy ion diffusion,high electrical conductivity enabled by in-situ grown carbon nanotubes matrix and residual metal Co nanoparticles for fast electron transfer,sufficient micropores and high N content(8.9 at%)with dominated pyridinic N(54%)for enhanced zinc ion storage,the resulting nPC cathodes for ZIHCs achieved high capacities of 302 and137 m Ah g^(-1) at 1 and 18 A g^(-1),outperforming most reported carbon based cathodes.Theoretical results further disclosed that pyridinic N possessed larger binding energy of-4.99 eV to chemically coordinate with Zn2+than other N species.Moreover,quasi-solid-state ZIHCs with gelatin based gel electrolytes exhibited high energy density of 157.6 Wh kg^(-1) at 0.69 kW kg^(-1),high safety and mechanical flexibility to withstand mechanical deformation and drilling.This strategy of developing pyridinic nitrogen enriched porous carbon will pave a new avenue to construct safe ZIHCs with high energy densities.

Intersection capacity based on driver's visual characteristics

In order to reflect the influence of the drivers＇ characteristic differences on intersection capacity under a mixed traffic flow, a driver correction coefficient for the intersection capacity calculation according to the driver＇s visual characteristics is proposed. First, the parameters of the driver＇s visual characteristics at some real roads, including gaze fixation distribution, mean fixation duration, visual angle distribution and some other parameters at intersections, are collected. Then, the relationship between the traffic flow rate at intersections and the parameters of driver eye movements are established. The analytical results indicate that when the traffic flow is unsaturated, the parameters of driver eye movements change relatively little; however, when the traffic flow is saturated, the parameters of driver eye movements change drastically. Finally, the saturation-flow-rate model is modified according to the parameters of driver eye movements; thus, a capacity model of intersections considering the driver＇s visual characteristics is obtained.

Human Carrying Capacity of Rangeland Resources in China′s Mountain Areas

Based on analysis of the development potential of rangeland resources in China＇s mountain areas, the paper makes analysis and forecast in human carrying capacity of rangeland resources. It provides some reference for drawing up the development strategy in mountain areas.

A Qualitative Appraisal of China’s Efforts in Fishing Capacity Management

This paper provides a critical review of some major efforts made by China to manage the fishing capacity of its marine capture fisheries. It begins by reviewing the key concepts and issues closely related to fishing capacity management. Following on this, a brief introduction to China’s marine capture fisheries is offered, especially the trends of its marine landings and marine fishing fleets and the status of fish stocks in waters under its jurisdiction. Next comes the main concern of the paper, i.e., some major actions recently initiated by China to deal with the overcapacity problem confronting it. The paper ends with conclusions and suggestions.

Using a GIS to Assessment the Load-Carrying Capacity of Soil Case of Berhoum Area, Hodna Basin, (Eastern Algeria)

The concept of load-carrying capacity of the soil can be evaluated by two main components: permissible stress and permissible depth;and therefore, running it begins its assessment that allows an outline of exploitation. Nevertheless, the assessment of the load-carrying capacity made the object of several works of research and many models, based on the multi-criteria analysis, have been established. This work examines the contribution of GIS approach to assessment load-carrying capacity of the soil. This one has been finished in two practicums: 1) Assessment of the capacity of soil by a multi-criteria approach, using the Weighted Sum Model (WSM);2) It brought to use the GIS approach to evaluate and spatialize degree of soil bearing stresses resulting from the buildings, as well as load distribution. The method has been applied to the Berhoum area of Hodna Basin, in eastern Algeria, where each is characterized by its various natural properties and density of equipment. Final results are better in the classification of the degree of load-carrying capacity possible in each site. This results in allowing exploiters to program their optimal designs for the rational management of the area.

Railroad capacity tools and methodologies in the U.S. and Europe

A growing demand for passenger and freight transportation, combined with limited capital to expand the United States （U.S.） rail infrastructure, is creating pressure for a more efficient use of the current line capacity. This is further exacerbated by the fact that most passenger rail services operate on corridors that are shared with freight traffic. A capacity analysis is one alternative to address the situation and there are various approaches, tools, and methodologies available for application. As the U.S. continues to develop higher speed passenger services with similar characteristics to those in European shared-use lines, understanding the common methods and tools used on both continents grows in relevance. There has not as yet been a detailed investigation as to how each continent approaches capacity analysis, and whether any benefits could be gained from cross-pollination. This paper utilizes more than 50 past capacity studies from the U.S. and Europe to describe the different railroad capacity defini- tions and approaches, and then categorizes them, based on each approach. The capacity methods are commonly di- vided into analytical and simulation methods, but this paper also introduces a third, ＂combined simulation- analytical＂ category. The paper concludes that Europeanrail studies are more unified in terms of capacity, concepts, and techniques, while the U.S. studies represent a greater variation in methods, tools, and objectives. The majority of studies on both continents use either simulation or a combined simulation-analytical approach. However, due to the significant differences between operating philosophy and network characteristics of these two rail systems, European studies tend to use timetable-based simulation tools as opposed to the non-timetable-based tools commonly used in the U.S. rail networks. It was also found that validation of studies against actual operations was not typically completed or was limited to comparisons with a base model.

Conversion of LiPSs Accelerated by Pt-Doped Biomass-Derived Hyphae Carbon Nanobelts as Self-Supporting Hosts for Long-Lifespan Li-S Batteries

Rechargeable Li-S batteries(LSBs)are emerging as an important alternative to lithium-ion batteries(LIBs),owing to their high energy densities and low cost;yet sluggish redox kinetics of LiPSs results in inferior cycle life.Herein,we prepared multifunctional self-supporting hyphae carbon nanobelt(HCNB)as hosts by carbonization of hyphae balls of Rhizopus,which could increase the S loading of the cathode without sacrificing reaction kinetics.Trace platinum(Pt)nanoparticles were introduced into HCNBs(PtHCNBs)by ion-beam sputtering deposition.Based on the X-ray photoelectron spectroscopy analyses,the introduced trace Pt regulated the local electronic states of heteroatoms in HCNBs.Electrochemical kinetics investigation combined with operando Raman measurements revealed the accelerated reaction mechanics of sulfur species.Benefiting from the synergistic catalytic effect and the unique structures,the as-prepared PtHCNB/MWNCT/S cathodes delivered a stable capacity retention of 77%for 400 cycles at 0.5 C with a sulfur loading of 4.6 mg cm^(-2).More importantly,remarkable cycling performance was achieved with an high areal S loading of 7.6 mg cm^(-2).This finding offers a new strategy to prolong the cycle life of LSBs.

Ultimate Bending Capacity of Strain Hardening Steel Pipes

Based on Hencky＇s total strain theory of plasticity,ultimate bending capacity of steel pipes can be determined analytically assuming an elastic-linear strain hardening material,the simplified analytical solution is proposed as well.Good agreement is observed when ultimate bending capacities obtained from analytical solutions are compared with experimental results from full-size tests of steel pipes.Parametric study conducted as part of this paper indicates that the strain hardening effect has significant influence on the ultimate bending capacity of steel pipes.It is shown that pipe considering strain hardening yields higher bending capacity than that of pipe assumed as elastic-perfectly plastic material.Thus,the ignorance of strain hardening effect,as commonly assumed in current codes,may underestimate the ultimate bending capacity of steel pipes.The solutions proposed in this paper are applicable in the design of offshore/onshore steel pipes,supports of offshore platforms and other tubular structural steel members.

Methods for Estimating the Ultimate Bearing Capacity of Layered Foundations

The Meyerhof and Hanna′s(M-H) method to estimate the ultimate bearing capacity of layered foundations was improved. The experimental results of the load tests in Tianjin New Harbor were compared with predictions with the method recommended by the code for the foundations of harbor engineering, i.e. Hansen′s method and the improved M-H method. The results of the comparisons implied that the code and the improved M-H method could give a better prediction.

Shenyang Research Institute of Foundry produces guide vane for Baihetan hydropower units with the world＇s largest unit capacity

On October 17, 2017, the first stay ring of Baihetan 1 million kW hydropower units, with the largest unit capacity in the world, passed the acceptance inspection. Shenyang Research Institute of Foundry （SRIF） has been recognized by owners and OEMs of Baihetan Hydropower Station for its long-term and stable （electroslag remelting）＂ and technology of ＂AOD ＋ ESR good performance of guide vanes at several major hydropower projects both at home and abroad.

Student capacity building of dengue prevention and control: A study of an Islamic school, Southern Thailand

Dengue has been a critical problem for an Islamic School, Nakhon Si Thammarat province, Southern Thailand. Objectives: 1) to build student capacity;and 2) to evaluate the results of student capacity building. Method: Participatory Action Research: PAR was applied in three phases: 1) the school-based preparation phase;2) the process of building student capacity phase, and 3) evaluation of the results of the student capacity building. Independent T-Test statistical method was used to analyze student capacity both before and after the intervention. Larval Indices were determined through ratio analysis. Results: Prior to the intervention, there was no clear strategy for combating dengue. In this study, three groups were formed to build student capacity: a leader group, a non-leader group, and a support group. The leader group (48 student leaders), critical to the study, was set as a dengue club named “Eliminate Ades Aegypti, the culprit of dengue” which focused on eight sets of activities: “Dengue or Death”, “Seniors educating juniors”, “Reward for good answers”, “Dengue monitoring team”, “Youth to expel mosquetoes”, “Mosquito or busy”, “Garbage elimination of Pondok”, and “Essential doctors”. The level of student capacity for the prevention and control of dengue of a sampling of 308 student representatives of the Pondok (Islamic school) showed an increase after intervention ( (SD);56.78 (17.06);65.33(15.36) and different statistic significant (P < 0.001). The Larval indices ratio levels had decreased from the original levels (BI = 244, HI = 45, and CI = 26) after intervention (BI = 137, HI = 39, and CI = 19). Dengue morbidity and mortality rates were not found during the study. Discussion: Although there had been an increase in student capacity, a decrease in the larval indices ratio, and the absence of a dengue epidemiology index, the high risk of a dengue epidemic might still be found in the school because the ratio of larval indices were higher than the standard index. Then, the committed participation of students, school, and communities around the school vicinity is needed in building student capacity of dengue prevention and control.

The revision on heat capacity of Einstein’s solid model

This paper is based on Einstein’s supposition about crystal lattice vibration, which states that when Einstein’s temperature ΘE is not less than the crystal temperature T but less than 2T, the expression of crystal molar heat capacity changes to the Dulong-Petit equation Cv=3R. Thereby this equation can explain why crystal molar heat capacity equals about 3R not only at low temperatures but also at normal temperatures for many kinds of metals. It can be calculated that the nonlinear interaction among atoms contributes to the molar heat capacity using the coefficient of expansion β and the Grüneisen constant γ. The result is that the relative error between the theoretical and the experimental value of the molar heat capacity is reduced greatly for many kinds of metals, especially for metals of IA. The relative error can be cut by about 17%.

Intellectual Capacity of Children Exposed to Environmental Pollution in the Extreme South of Brazil

Objective： The study evaluated the intellectual capacity of children who live in areas that were E （exposed） or NE （not exposed） to environmental pollution. Method： 246 students between the ages of 8 and 11 years and 8 months were evaluated. Data were collected between May and June 2010 using a semi-structured questionnaire to examine factors that were related to compromised intellectual capacity. Intellectual capacity was evaluated with Raven＇s Colored Progressive Matrices Scale. The intellectual capacity of children who live in areas that were exposed or not exposed was compared using chi-squared tests and raw and adjusted analyses were conducted using Poisson regression. Results： The general occurrence of intellectual impairment was 28.9%, with 22.0% in the non-exposed area and 36.1% in the exposed area （p = 0.01）. The outcome was associated with the following： a lack of companionship （RP = 2.77; p 〈 0.00）, maternal education of less than five years （RP = 2.13; p 〈 0.00）, the mother not being Caucasian （RP = 1.57;p 〈 0.00）, residing in an exposed area （RP = 1.88;p 〈 0.00）, and nutritional risk/malnutrition （RP = 2.83; p 〈 0.00）. Conclusions： The results showed a high occurrence of intellectual impairment and a significant difference between the environmental areas. Additional research is needed to improve the understanding of several results. The town＇s priorities should include efforts related to environmental health.

ZTE Launches the World's Largest Capacity Data Center Switches

24 September 2013, Shenzhen--ZTE today announced the release of the BigMatrix 9900 series of data center switches, the world＇ s largest-capacity data center switches. The BigMatrix 9900 product family comprises data switches with the largest capacity in the world. The switches are designed large cloud computing and big data scenarios and allow for higher-density deployment in data centers. Each single slot can support up to 144 10G ports, 36 40G ports, or 12 IOOG ports. The Big Matrix 9900 series comprises four switch models-9916, 9912, 9908, and 9904-each of which supports a maximum switching capacity of 84.48 Tbps.

Quantificational Study on Carrying Capacity of the Regional Environment-Taking the City of Dalian as an Example

With the analysis of the connotation and charter of the regional environment＇s carrying capacity, this paper, firstly, establishes the index system on the base of the affecting factors. Secondly, this paper discusses the methods of the quantization of the environment＇s carrying capacity of Dalian. Finaly; this paper predicts the changing tendency of the environment＇s carrying capacity.

China's Power Generating Capacity Exceeding 200 GW

Shi Dazhen, Minister of the Power Industry, has announced that China’s power Construction had developed to a new level, exceeding 200 GW. He said that China’s power generating capacity reached 100 GW in 1987 and 199.9 GW at the end of last year. As another two 60,000 kilowatts of power generation units went into operation in March, this year, power generating capacity reaches 200 GW in only seven years. Such a construction scale and

Installed capacity of coal seam gas power generation exceeds 480 MW under SGCC's coverage

The journalist learned from the "National Gas Security Working Conference" held recently that the coal seam gas power generation has been rapidly developed in recent years.As of July 2009,within the SGCC's business area,the power generation