HPLC-DPPH法评价雪松松针抗氧化活性成分

目的评价雪松松针抗氧化活性成分。方法以维生素C(VC)和没食子酸为阳性对照,采用高效液相色谱(HPLC)法测定1,1-二苯基-2-苦肼基(DPPH)溶液加入雪松松针抗氧化活性成分后DPPH峰面积的衰减情况,并通过计算DPPH自由基的清除率和半数抑制浓度(IC_(50)),来评价雪松松针3种有效部位及8个单体成分的抗氧化活性。采用Agilent Eclipse Plus-C_(18)(250 mm×4.6 mm,5μm)为色谱柱,乙腈-水(62∶38,V/V)为流动相;检测波长为517 nm;流速为1.0 mL/min;柱温为25℃;进样量为20μL。结果雪松松针各有效部位清除DPPH自由基活性的能力大小依次为总黄酮>总多酚>总木脂素,IC_(50)分别为76.10、100.50、115.40μg/mL。与阳性对照比较,除山柰酚-3-O-β-D-葡萄糖苷外,7个单体化合物清除DPPH自由基活性的能力大小依次为二氢杨梅素>金丝桃苷>原儿茶酸>没食子酸>阿魏酸>杨梅素>山柰酚-3-O-(6″-O-E-阿魏酰基)-β-D-吡喃葡萄糖苷>VC>异鼠李素,IC50分别为16.50、19.40、23.73、27.24、32.10、32.20、47.60、93.20、297.20μg/mL。结论建立了HPLC-DPPH法用于评价雪松松针抗氧化活性;雪松松针具有较强的抗氧化活性,其中有效部位总黄酮、总多酚及单体成分二氢杨梅素、金丝桃苷等是具有开发前景的纯天然抗氧化剂。

A comparison study on structure-function relationship of polysaccharides obtained from sea buckthorn berries using different methods:antioxidant and bile acid-binding capacity

In this study,the structural characters,antioxidant activities and bile acid-binding ability of sea buckthorn polysaccharides(HRPs)obtained by the commonly used hot water(HRP-W),pressurized hot water(HRP-H),ultrasonic(HRP-U),acid(HRP-C)and alkali(HRP-A)assisted extraction methods were investigated.The results demonstrated that extraction methods had significant effects on extraction yield,monosaccharide composition,molecular weight,particle size,triple-helical structure,and surface morphology of HRPs except for the major linkage bands.Thermogravimetric analysis showed that HRP-U with filamentous reticular microstructure exhibited better thermal stability.The HRP-A with the lowest molecular weight and highest arabinose content possessed the best antioxidant activities.Moreover,the rheological analysis indicated that HRPs with higher galacturonic acid content and molecular weight showed higher viscosity and stronger crosslinking network(HRP-C,HRP-W and HRP-U),which exhibited stronger bile acid binding capacity.The present findings provide scientific evidence in the preparation technology of sea buckthorn polysaccharides with good antioxidant and bile acid binding capacity which are related to the structure affected by the extraction methods.

Insight into the capacity degradation and structural evolution of single-crystal Ni-rich cathodes

Single-crystal Ni-rich cathodes are a promising candidate for high-energy lithium-ion batteries due to their higher structural and cycling stability than polycrystalline materials.However,the phase evolution and capacity degradation of these single-crystal cathodes during continuous lithation/delithation cycling remains unclear.Understanding the mapping relationship between the macroscopic electrochemical properties and the material physicochemical properties is crucial.Here,we investigate the correlation between the physical-chemical characteristics,phase transition,and capacity decay using capacity differential curve feature identification and in-situ X-ray spectroscopic imaging.We systematically clarify the dominant mechanism of phase evolution in aging cycling.Appropriately high cut-off voltages can mitigate the slow kinetic and electrochemical properties of single-crystal cathodes.We also find that second-order differential capacity discharge characteristic curves can be used to identify the crystal structure disorder of Ni-rich cathodes.These findings constitute a step forward in elucidating the correlation between the electrochemical extrinsic properties and the physicochemical intrinsic properties and provide new perspectives for failure analysis of layered electrode materials.

Effect of Trimetazidine on Functional Capacity in Patient with Ischaemic Cardiomyopathy (TOFCAPI)

Objective: This study aimed to evaluate the efficacy of trimetazidine on exercise capacity via a six-minute walk test in patients with ischaemic cardiomyopathy and also evaluate the effect of trimetazidine on left ventricular function via echocardiography in the same population. Methods: This prospective observational study, conducted at the National Institute of Cardiovascular Diseases in Dhaka, Bangladesh, enrolled 200 patients with ischaemic cardiomyopathy and a depressed left ventricular ejection fraction (LVEF Results: In this study (n = 200) of ischaemic cardiomyopathy patients, the mean age was 58 years, with 76% of the patients being male. All study subjects received GDMT (Guideline-Directed Medical Therapy) for angina and heart failure. Those who received the modified released form of trimetazidine developed lesions during the 1st and 2nd follow-ups, during which the LVEF, LVIDd, and six-minute walk distance significantly improved (p Conclusion: The findings of the present study demonstrated that the addition of modified-release trimetazidine to GDMT can improve exercise capacity and left ventricular function in patients with ischaemic cardiomyopathy.

Functional Capacity of Patients with Venous Thromboembolic Disease Six to Twelve Months after Treatment

Background: Venous thromboembolism (VTE) is among the leading causes of hospital-related disability-adjusted life years lost. We aimed to determine the prevalence and determinants of functional capacity impairment six to twelve months after an acute VTE event. Methods: This was a cross-sectional study conducted between January and April 2021 in two referral hospitals of Yaoundé, including consenting adult patients admitted to these hospitals six to twelve months ago for VTE. We excluded dead patients and those with any comorbidity or symptoms limiting physical activity. The functional outcome was assessed with the six-minute walk test. Functional capacity impairment was defined as walking distance lower than the expected value. Results: We included 27 cases in this study with a mean age of 53.2 ± 14.4 years. The prevalence of functional capacity impairment was 29.6% (95% CI: 14.8 - 48.1). Factors associated with poor functional outcome were obesity (OR: 59.5;95% CI: 4.6 - 767.2;p - 207.4;p = 0.017), massive PE (OR: 30;95% CI: 2.5 - 354;p = 0.004), and poor adherence to treatment (OR: 30.3;95% CI: 2.5 - 333.3;p = 0.004). Conclusion: Functional capacity impairment is common in the medium-term after VTE and factors associated with this poor outcome are obesity, the severity of the VTE, and poor adherence to treatment.

白秃马勃菌油化学成分分析与DPPH自由基清除活性研究

为了分析白秃马勃菌油化学成分并评价其1,1-二苯基-2-苦肼基(DPPH自由基)清除活性,利用乙醚为萃取剂,通过连续回流渗漉提取法从白秃马勃中得到粗脂肪,粗脂肪经硅胶短柱进一步纯化后得到菌油。运用气相色谱-质谱联用技术(GC-MS)对白秃马勃菌油的化学成分进行分析,采用体外DPPH自由基清除实验评价菌油的抗氧化活性。结果显示,白秃马勃粗脂肪得率为9.49%,菌油得率为0.28%。经GC-MS分析,白秃马勃菌油中共鉴定出49个化合物,相对含量占总菌油的73.562%,其主要特征化学成分为6种脂肪酸及其酯类衍生物,其中不饱和脂肪酸及其酯类有4个,分别是反亚油酸甲酯、油酸甲酯、顺式-13-十八碳烯酸和亚油酸乙酯,总相对含量为51.06%,饱和脂肪酸及其酯类有2个,分别是棕榈酸乙酯和棕榈酸甲酯,总相对含量为12.55%。自由基清除实验结果表明,菌油具有有效的DPPH自由基清除活性,半数清除浓度(EC50)为26.1362±0.6435 mg/mL。

Effect of speed humps on instantaneous traffic emissions in a microscopic model with limited deceleration capacity

As a common transportation facility, speed humps can control the speed of vehicles on special road sections to reduce traffic risks. At the same time, they also cause instantaneous traffic emissions. Based on the classic instantaneous traffic emission model and the limited deceleration capacity microscopic traffic flow model with slow-to-start rules, this paper has investigated the impact of speed humps on traffic flow and the instantaneous emissions of vehicle pollutants in a single lane situation. The numerical simulation results have shown that speed humps have significant effects on traffic flow and traffic emissions. In a free-flow region, the increase of speed humps leads to the continuous rise of CO_(2), NO_(X) and PM emissions. Within some density ranges, one finds that these pollutant emissions can evolve into some higher values under some random seeds. Under other random seeds, they can evolve into some lower values. In a wide moving jam region, the emission values of these pollutants sometimes appear as continuous or intermittent phenomenon. Compared to the refined Na Sch model, the present model has lower instantaneous emissions such as CO_(2), NO_(X) and PM and higher volatile organic components(VOC) emissions. Compared to the limited deceleration capacity model without slow-to-start rules, the present model also has lower instantaneous emissions such as CO_(2), NO_(X) and PM and higher VOC emissions in a wide moving jam region. These results can also be confirmed or explained by the statistical values of vehicle velocity and acceleration.

含喹啉杂环席夫碱的合成及清除DPPH自由基活性研究

以水杨醛及衍生物(水杨醛、5-甲基水杨醛、5-甲氧基水杨醛)和2-肼基喹啉为原料,合成了3种含喹啉杂环的腙类希夫碱(L1=水杨醛缩-2-肼基喹啉、L2=5-甲基水杨醛-缩-2-肼基喹啉、L3=5-甲氧基水杨醛-缩-2-肼基喹啉),并用红外、紫外可见-吸收光谱、质谱和核磁共振谱等手段表征其结构,采用1,1-二苯基-2-三硝基苯肼(DPPH)自由基法测试了它们的抗氧化活性,并考察了溶剂、温度、光照对清除DPPH自由基活性的影响。结果表明:以乙醇为溶剂,3种含喹啉杂环的希夫碱对DPPH自由基均具有较好的清除能力,温度、光照对其清除效果影响都较小。

A comparative study of data-driven battery capacity estimation based on partial charging curves

With its generality and practicality, the combination of partial charging curves and machine learning(ML) for battery capacity estimation has attracted widespread attention. However, a clear classification,fair comparison, and performance rationalization of these methods are lacking, due to the scattered existing studies. To address these issues, we develop 20 capacity estimation methods from three perspectives:charging sequence construction, input forms, and ML models. 22,582 charging curves are generated from 44 cells with different battery chemistry and operating conditions to validate the performance. Through comprehensive and unbiased comparison, the long short-term memory(LSTM) based neural network exhibits the best accuracy and robustness. Across all 6503 tested samples, the mean absolute percentage error(MAPE) for capacity estimation using LSTM is 0.61%, with a maximum error of only 3.94%. Even with the addition of 3 m V voltage noise or the extension of sampling intervals to 60 s, the average MAPE remains below 2%. Furthermore, the charging sequences are provided with physical explanations related to battery degradation to enhance confidence in their application. Recommendations for using other competitive methods are also presented. This work provides valuable insights and guidance for estimating battery capacity based on partial charging curves.

Prediction of Damping Capacity Demand in Seismic Base Isolators via Machine Learning

Base isolators used in buildings provide both a good acceleration reduction and structural vibration control structures.The base isolators may lose their damping capacity over time due to environmental or dynamic effects.This deterioration of them requires the determination of the maintenance and repair needs and is important for the long-termisolator life.In this study,an artificial intelligence prediction model has been developed to determine the damage and maintenance-repair requirements of isolators as a result of environmental effects and dynamic factors over time.With the developed model,the required damping capacity of the isolator structure was estimated and compared with the previously placed isolator capacity,and the decrease in the damping property was tried to be determined.For this purpose,a data set was created by collecting the behavior of structures with single degrees of freedom(SDOF),different stiffness,damping ratio and natural period isolated from the foundation under far fault earthquakes.The data is divided into 5 different damping classes varying between 10%and 50%.Machine learning model was trained in damping classes with the data on the structure’s response to random seismic vibrations.As a result of the isolator behavior under randomly selected earthquakes,the recorded motion and structural acceleration of the structure against any seismic vibration were examined,and the decrease in the damping capacity was estimated on a class basis.The performance loss of the isolators,which are separated according to their damping properties,has been tried to be determined,and the reductions in the amounts to be taken into account have been determined by class.In the developed prediction model,using various supervised machine learning classification algorithms,the classification algorithm providing the highest precision for the model has been decided.When the results are examined,it has been determined that the damping of the isolator structure with the machine learning method is predicted successfully at a level exceeding 96%,and it is an effective method in deciding whether there is a decrease in the damping capacity.

Battery pack capacity estimation for electric vehicles based on enhanced machine learning and field data

Accurate capacity estimation is of great importance for the reliable state monitoring,timely maintenance,and second-life utilization of lithium-ion batteries.Despite numerous works on battery capacity estimation using laboratory datasets,most of them are applied to battery cells and lack satisfactory fidelity when extended to real-world electric vehicle(EV)battery packs.The challenges intensify for large-sized EV battery packs,where unpredictable operating profiles and low-quality data acquisition hinder precise capacity estimation.To fill the gap,this study introduces a novel data-driven battery pack capacity estimation method grounded in field data.The proposed approach begins by determining labeled capacity through an innovative combination of the inverse ampere-hour integral,open circuit voltage-based,and resistance-based correction methods.Then,multiple health features are extracted from incremental capacity curves,voltage curves,equivalent circuit model parameters,and operating temperature to thoroughly characterize battery aging behavior.A feature selection procedure is performed to determine the optimal feature set based on the Pearson correlation coefficient.Moreover,a convolutional neural network and bidirectional gated recurrent unit,enhanced by an attention mechanism,are employed to estimate the battery pack capacity in real-world EV applications.Finally,the proposed method is validated with a field dataset from two EVs,covering approximately 35,000 kilometers.The results demonstrate that the proposed method exhibits better estimation performance with an error of less than 1.1%compared to existing methods.This work shows great potential for accurate large-sized EV battery pack capacity estimation based on field data,which provides significant insights into reliable labeled capacity calculation,effective features extraction,and machine learning-enabled health diagnosis.

Durable K-ion batteries with 100% capacity retention up to 40,000 cycles

Currently,the major challenge in terms of research on K-ion batteries is to ensure that they possess satisfactory cycle stability and specific capacity,especially in terms of the intrinsically sluggish kinetics induced by the large radius of K+ions.Here,we explore high-performance K-ion half/full batteries with high rate capability,high specific capacity,and extremely durable cycle stability based on carbon nanosheets with tailored N dopants,which can alleviate the change of volume,increase electronic conductivity,and enhance the K+ion adsorption.The as-assembled K-ion half-batteries show an excellent rate capability of 468 mA h g^(−1) at 100 mA g^(−1),which is superior to those of most carbon materials reported to date.Moreover,the as-assembled half-cells have an outstanding life span,running 40,000 cycles over 8 months with a specific capacity retention of 100%at a high current density of 2000 mA g^(−1),and the target full cells deliver a high reversible specific capacity of 146 mA h g^(−1) after 2000 cycles over 2 months,with a specific capacity retention of 113%at a high current density of 500 mA g^(−1),both of which are state of the art in the field of K-ion batteries.This study might provide some insights into and potential avenues for exploration of advanced K-ion batteries with durable stability for practical applications.

毛蜂窝菌菌油化学成分分析与DPPH自由基清除活性

目的分析毛蜂窝菌菌油的化学成分并评价其1,1-二苯基-2-苦肼基(DPPH)自由基清除活性。方法以乙醚为提取剂,采用连续回流渗漉法提取毛蜂窝菌菌油,通过硅胶柱层析对菌油进行精制。毛蜂窝菌菌油化学成分经过气相色谱-质谱联用(GC-MS)技术分析,采用面积归一法测定菌油中各组分的相对含量,再用分光光度法评价其DPPH自由基清除活性。结果经GC-MS分析,毛蜂窝菌菌油中一共分离出了223个峰,鉴定出了44种化合物,占菌油的45.067%。相对含量最高的为(E,E)-亚油酸甲酯(5.362%),其次是甘油三亚油酸酯(4.147%),亚油酸甲酯(4.098%),相对含量均超过了4%。菌油DPPH自由基消除活性实验结果显示,一半DPPH自由基被清除时,菌油样品浓度为4.3540 mg/mL。结论毛蜂窝菌菌油的化学成分丰富多样,含有烷烃类化合物12种,脂类化合物12种,烯烃类化合物4种,酸类化合物5种,醇类化合物2种,醚类化合物3种,以及醛、胺等化合物。且该菌油具有有效的DPPH自由基清除活性。

Theoretical Analysis on Deflection and Bearing Capacity of Prestressed Bamboo-Steel Composite Beams

A theoretical analysis of upward deflection and midspan deflection of prestressed bamboo-steel composite beams is presented in this study.The deflection analysis considers the influences of interface slippage and shear deformation.Furthermore,the calculation model for flexural capacity is proposed considering the two stages of loading.The theoretical results are verified with 8 specimens considering different prestressed load levels,load schemes,and prestress schemes.The results indicate that the proposed theoretical analysis provides a feasible prediction of the deflection and bearing capacity of bamboo-steel composite beams.For deflection analysis,the method considering the slippage and shear deformation provides better accuracy.The theoretical method for bearing capacity matches well with the test results,and the relative errors in the serviceability limit state and ultimate limit state are 4.95%and 5.85%,respectively,which meet the accuracy requirements of the engineered application.

Effective Capacity of URLLC over Parallel Fading Channels with Imperfect Channel State Information

This paper investigates the effective capacity of a point-to-point ultra-reliable low latency communication(URLLC)transmission over multiple parallel sub-channels at finite blocklength(FBL)with imperfect channel state information(CSI).Based on reasonable assumptions and approximations,we derive the effective capacity as a function of the pilot length,decoding error probability,transmit power and the sub-channel number.Then we reveal significant impact of the above parameters on the effective capacity.A closed-form lower bound of the effective capacity is derived and an alternating optimization based algorithm is proposed to find the optimal pilot length and decoding error probability.Simulation results validate our theoretical analysis and show that the closedform lower bound is very tight.In addition,through the simulations of the optimized effective capacity,insights for pilot length and decoding error probability optimization are provided to evaluate the optimal parameters in realistic systems.

MOF-derived porous graphitic carbon with optimized plateau capacity and rate capability for high performance lithium-ion capacitors

The development of anode materials with high rate capability and long charge-discharge plateau is the key to improve per-formance of lithium-ion capacitors(LICs).Herein,the porous graphitic carbon(PGC-1300)derived from a new triply interpenetrated co-balt metal-organic framework(Co-MOF)was prepared through the facile and robust carbonization at 1300°C and washing by HCl solu-tion.The as-prepared PGC-1300 featured an optimized graphitization degree and porous framework,which not only contributes to high plateau capacity(105.0 mAh·g^(−1)below 0.2 V at 0.05 A·g^(−1)),but also supplies more convenient pathways for ions and increases the rate capability(128.5 mAh·g^(−1)at 3.2 A·g^(−1)).According to the kinetics analyses,it can be found that diffusion regulated surface induced capa-citive process and Li-ions intercalation process are coexisted for lithium-ion storage.Additionally,LIC PGC-1300//AC constructed with pre-lithiated PGC-1300 anode and activated carbon(AC)cathode exhibited an increased energy density of 102.8 Wh·kg^(−1),a power dens-ity of 6017.1 W·kg^(−1),together with the excellent cyclic stability(91.6%retention after 10000 cycles at 1.0 A·g^(−1)).

Tensile Strain Capacity Prediction of Engineered Cementitious Composites (ECC) Using Soft Computing Techniques

Plain concrete is strong in compression but brittle in tension,having a low tensile strain capacity that can significantly degrade the long-term performance of concrete structures,even when steel reinforcing is present.In order to address these challenges,short polymer fibers are randomly dispersed in a cement-based matrix to forma highly ductile engineered cementitious composite(ECC).Thismaterial exhibits high ductility under tensile forces,with its tensile strain being several hundred times greater than conventional concrete.Since concrete is inherently weak in tension,the tensile strain capacity(TSC)has become one of the most extensively researched properties.As a result,developing a model to predict the TSC of the ECC and to optimize the mixture proportions becomes challenging.Meanwhile,the effort required for laboratory trial batches to determine the TSC is reduced.To achieve the research objectives,five distinct models,artificial neural network(ANN),nonlinear model(NLR),linear relationship model(LR),multi-logistic model(MLR),and M5P-tree model(M5P),are investigated and employed to predict the TSCof ECCmixtures containing fly ash.Data from115 mixtures are gathered and analyzed to develop a new model.The input variables include mixture proportions,fiber length and diameter,and the time required for curing the various mixtures.The model’s effectiveness is evaluated and verified based on statistical parameters such as R2,mean absolute error(MAE),scatter index(SI),root mean squared error(RMSE),and objective function(OBJ)value.Consequently,the ANN model outperforms the others in predicting the TSC of the ECC,with RMSE,MAE,OBJ,SI,and R2 values of 0.42%,0.3%,0.33%,0.135%,and 0.98,respectively.

Exogenous calcium enhances the physiological status and photosynthetic capacity of rose under drought stress

Drought(water shortage)can substantially limit the yield and economic value of rose plants(Rosa spp.).Here,we characterized the effect of exogenous calcium(Ca^(2+))on the antioxidant system and photosynthesis-related properties of rose under polyethylene glycol 6000(PEG6000)-induced drought stress.Chlorophyll levels,as well as leaf and root biomass,were significantly reduced by drought;drought also had a major effect on the enzymatic antioxidant system and increased concentrations of reactive oxygen species.Application of exogenous Ca^(2+)increased the net photosynthetic rate and stomatal conductance of leaves,enhanced water-use efficiency,and increased the length and width of stomata following exposure to drought.Organ-specific physiological responses were observed under different concentrations of Ca^(2+).Application of 5 mmol·L^(-1)Ca^(2+)promoted photosynthesis and antioxidant activity in the leaves,and application of 10 mmol·L^(-1)Ca^(2+)promoted antioxidant activity in the roots.Application of exogenous Ca^(2+)greatly enhanced the phenotype and photosynthetic capacity of potted rose plants following exposure to drought stress.Overall,our findings indicate that the application of exogenous Ca^(2+)enhances the drought resistance of roses by promoting physiological adaptation and that it could be used to aid the cultivation of rose plants.

A hierarchical enhanced data-driven battery pack capacity estimation framework for real-world operating conditions with fewer labeled data

Battery pack capacity estimation under real-world operating conditions is important for battery performance optimization and health management,contributing to the reliability and longevity of batterypowered systems.However,complex operating conditions,coupling cell-to-cell inconsistency,and limited labeled data pose great challenges to accurate and robust battery pack capacity estimation.To address these issues,this paper proposes a hierarchical data-driven framework aimed at enhancing the training of machine learning models with fewer labeled data.Unlike traditional data-driven methods that lack interpretability,the hierarchical data-driven framework unveils the“mechanism”of the black box inside the data-driven framework by splitting the final estimation target into cell-level and pack-level intermediate targets.A generalized feature matrix is devised without requiring all cell voltages,significantly reducing the computational cost and memory resources.The generated intermediate target labels and the corresponding features are hierarchically employed to enhance the training of two machine learning models,effectively alleviating the difficulty of learning the relationship from all features due to fewer labeled data and addressing the dilemma of requiring extensive labeled data for accurate estimation.Using only 10%of degradation data,the proposed framework outperforms the state-of-the-art battery pack capacity estimation methods,achieving mean absolute percentage errors of 0.608%,0.601%,and 1.128%for three battery packs whose degradation load profiles represent real-world operating conditions.Its high accuracy,adaptability,and robustness indicate the potential in different application scenarios,which is promising for reducing laborious and expensive aging experiments at the pack level and facilitating the development of battery technology.

Enhanced reversible hydrogen storage properties of wrinkled graphene microflowers confined LiBH_(4) system with high volumetric hydrogen storage capacity

LiBH_(4)with high hydrogen storage density,is regarded as one of the most promising hydrogen storage materials.Nevertheless,it suffers from high dehydrogenation temperature and poor reversibility for practical use.Nanoconfinement is effective in achieving low dehydrogenation temperature and favorable reversibility.Besides,graphene can serve as supporting materials for LiBH_(4)catalysts and also destabilize LiBH_(4)via interfacial reaction.However,graphene has never been used alone as a frame material for nanoconfining LiBH_(4).In this study,graphene microflowers with large pore volumes were prepared and used as nanoconfinement framework material for LiBH_(4),and the nanoconfinement effect of graphene was revealed.After loading 70 wt%of LiBH_(4) and mechanically compressed at 350 MPa,8.0 wt% of H2 can be released within 100 min at 320C,corresponding to the highest volumetric hydrogen storage density of 94.9 g H2 L^(-1)ever reported.Thanks to the nanoconfinement of graphene,the rate-limiting step of dehydrogenation of nanoconfined LiBH_(4) was changed and its apparent activation energy of the dehydrogenation(107.3 kJ mol^(-1))was 42%lower than that of pure LiBH_(4).Moreover,the formation of the intermediate Li_(2)B_(12)H_(12) was effectively inhibited,and the stable nanoconfined structure enhanced the reversibility of LiBH_(4).This work widens the understanding of graphene's nanoconfinement effect and provides new insights for developing high-density hydrogen storage materials.