Improving the Quality of Baobab Oil by Filtration on Activated Carbon from the Fruit Capsules

The baobab, Adansonia digitata L., plays an important role in the economy of local populations. Nowadays, baobab seed oil is highly prized for its many cosmetic and therapeutic applications, and for its composition of unsaturated fatty acids, sterols, and tocopherols. However, it undergoes numerous reactions during production, processing, transport, and storage, leading to undesirable products that make it unstable. The aim of this study was to provide local processors with innovative solutions for the treatment of unrefined vegetable oils. To this end, an experimental device for filtering crude oil on activated carbon made from fruit capsules was designed. The results obtained after the treatment show a significant decrease at (p < 5%) in acid value (1.62 to 0.58 mg KOH/g), peroxide value (4.40a to 0.50c mEqO2/Kg), chlorophyll concentration (1.81 to 0.50 mg/Kg) and primary and secondary oxidation products. According to these results, activated carbon’s adsorptive power eliminates oxidation products and certain pro-oxidants such as chlorophyll, resulting in a cleaner, more stable and better storable oil.

Progress and prospect of carbon dioxide capture, utilization and storage in CNPC oilfields

The development history of carbon capture,utilization and storage for enhanced oil recovery(CCUS-EOR)in China is comprehensively reviewed,which consists of three stages:research and exploration,field test and industrial application.The breakthrough understanding of CO_(2) flooding mechanism and field practice in recent years and the corresponding supporting technical achievements of CCUS-EOR project are systematically described.The future development prospects are also pointed out.After nearly 60 years of exploration,the theory of CO_(2) flooding and storage suitable for continental sedimentary reservoirs in China has been innovatively developed.It is suggested that C7–C15 are also important components affecting miscibility of CO_(2) and crude oil.The mechanism of rapid recovery of formation energy by CO_(2) and significant improvement of block productivity and recovery factor has been verified in field tests.The CCUS-EOR reservoir engineering design technology for continental sedimentary reservoir is established.The technology of reservoir engineering parameter design and well spacing optimization has been developed,which focuses on maintaining miscibility to improve oil displacement efficiency and uniform displacement to improve sweep efficiency.The technology of CO_(2) capture,injection and production process,whole-system anticorrosion,storage monitoring and other whole-process supporting technologies have been initially formed.In order to realize the efficient utilization and permanent storage of CO_(2),it is necessary to take the oil reservoir in the oil-water transition zone into consideration,realize the large-scale CO_(2) flooding and storage in the area from single reservoir to the overall structural control system.The oil reservoir in the oil-water transition zone is developed by stable gravity flooding of injecting CO_(2) from structural highs.The research on the storage technology such as the conversion of residual oil and CO_(2) into methane needs to be carried out.

Adsorption behavior of activated carbon for the elimination of zearalenone during bleaching process of corn oil

Zearalenone is a mycotoxin produced by Fusarium species.It frequently contaminates cereals used for foods or animal feeds,especially deposited in crude corn oil.Certain amounts of zearalenone can be removed during refining processes.In this study,we studied the influence of activated carbon and six industial absorbents(zeolite,diatomite,attapulgite,perlite,montmorillonite and activated clay)on the elimination of zearalenone during bleaching process of corn oil and explored the absorption mechanism of activated carbon.Results showed that activated carbon had an excellent adsorption capacity of zearalenone compared with the other six industrial adsorbents.For activated carbon,a high removal rate of zearalenone(exceeding 83%)from heavily zearalenone-polluted corn oil was achieved and the removal rate of zearalenone was kept above 60%after five regeneration cycles.The research on the adsorption mechanism of activated carbon showed that Freundlich adsorption isotherm model and pseudo-second-order kinetic model could well described the adsorption process.The thermodynamic study demonstrated that adsorption process was spontaneous and exothermic.Fourier transform infrared spectroscopy and Raman spectroscopy further revealed that activated carbon was effectively combined with zearalenone viaπ-πinteraction.Thus,activated carbon is an efficient and suitable adsorbent to control the levels of zearalenone during bleaching process of corn oil.This study not only proposed a systematic research scheme for the mechanism study of activated carbon for the elimination of zearalenone in corn oil,but also provided the scientific basis for developing effective methods to eliminate zearalenone in refined vegetable oils.

Quantitatively unmixing method for complex mixed oil based on its fractions carbon isotopes: A case from the Tarim Basin, NW China

Deep mixed oils with secondary alterations have been widely discovered in the Tarim Basin,but current methods based on biomarkers and isotopes to de-convolute mixed oil cannot calculate the exact mixing proportion of different end-member oils,which has seriously hindered further exploration of deep hydrocarbons in the study area.To solve this problem,we constructed a novel method based on the carbon isotope(δ13C)of the group components to de-convolute mixed liquid hydrocarbons under the material balance principle.The results showed that the mixed oil in the Tazhong Uplift was dominantly contributed at an average proportion of 68% by an oil end-member with heavier d13C that was believed to be generated from the Cambrian-Lower Ordovician source rocks,whereas the mixed oil in the Tabei Uplift was predominantly contributed at an average proportion of 61% by an oil end-member with lighter d13C that was believed to be generated from the Middle-Upper Ordovician source rocks.This indicates that,on the basis of the detailed description of the distribution of effective source rocks,the proposed method will be helpful in realizing differential exploration and further improving the efficiency of deep liquid hydrocarbon exploration in the Tarim Basin.In addition,compared to traditional δ13C methods for whole oil and individual n-alkanes in de-convoluted mixed oil,the proposed method has a wider range of applications,including for mixed oils with variations in color and density,indicating potential for promoting the exploration of deep complex mixed oils in the Tarim Basin and even around the world.

Carbon isotopic compositions of mono-, di-, tri-aromatics provide insights into the source of sulfur-rich crude oils in the Huanghekou Depression, Bohai Bay Basin

The stable carbon isotope compositions (δ13C) of individual aromatic hydrocarbons have been analyzed in sulfur-rich and sulfur-lean crude oils from the Huanghekou Depression, Bohai Bay Basin. The δ13C values of individual aromatic hydrocarbons, including alkylbenzenes, alkylnaphthalenes, alkylphenanthrenes, alkylfluorenes and alkyldibenzothiophenes, are reported. The main aims are to find out the origin of these oils and their relationship to paleoclimate. The distribution of aromatic hydrocarbons and maturity parameters show the oils all stay in the low-mature to mature stage. Meanwhile, aromatic hydrocarbons are mainly derived from the diagenetic/catagenetic origin. The δ13C values for 1,2,4-trimethylbenzene (−30.7‰ to −28.8‰) and 1,2,3,4-tetramethylbenzene (−32.4‰ to −26.3‰) indicate the algae-derived organic matter for alkylbenzenes. Some isomers, such as 1,7-+1,3-+1,6-dimethylnaphthalene, 1,2,5-trimethylnaphthalene, 1,2,5,6-+1,2,3,5-tetramethylnaphthalene, 1,10-+1,3-+3,10-+3,9-dimethylphenanthrenes, 1,6-+2,9-+2,5-dimethylphenanthrenes and 4,9-+4,10-+1,9- dimethylphenanthrenes show isotopic depletion (−34.9‰ to −25.2‰), indicating the major contribution of algae for these compounds. Meanwhile, isotopically depleted (−33.6‰ to −26.7‰) alkyldibenzothiophenes represent the algae input. δ13C values for mainly algae-derived naphthalene to trimethylnaphthalenes of sulfur-rich oils are more enriched than those of sulfur-lean oil, with the most significant difference of 4.4‰, indicating that the aridity of the environment and stratified water column result in the enrichment in 13C.

Effects of cosolvents on CO_(2) displacement of shale oil and carbon storage

Molecular dynamics method was used to establish composite wall/inorganic nanopores of three pore sizes, three shale oil systems, five CO_(2)-cosolvent systems, and pure CO_(2) system. The process of CO_(2)-cosolvent displacement of crude oil in shale nanopores and carbon storage was simulated and the influencing factors of displacement and storage were analyzed. It is shown that the attraction of the quartz wall to shale oil increases with the degree of hydroxylation. The higher the degree of quartz hydroxylation, the more difficult it is to extract the polar components of shale oil. Nanopore size also has a great impact on shale oil displacement efficiency. The larger the pore size, the higher the shale oil displacement efficiency. The closer the cosolvent molecules are to the polarity of the shale oil, the higher the mutual solubility of CO_(2) and shale oil. The more the non-polar components of shale oil, the lower the mutual solubility of CO_(2) and shale oil with highly polar cosolvent. Ethyl acetate is more effective in stripping relatively high polar shale oil, while dimethyl ether is more effective in stripping relatively low polar shale oil. Kerogen is highly adsorptive, especially to CO_(2). The CO_(2) inside the kerogen is not easy to diffuse and leak, thus allowing for a stable carbon storage. The highest CO_(2) storage rate is observed when dimethyl ether is used as a cosolvent, and the best storage stability is observed when ethyl acetate is used as a cosolvent.

Review on the challenges and strategies in oil and gas industry's transition towards carbon neutrality in China

In light of carbon-neutral pledge, the oil and gas industry has been facing several critical new challenges in China. The current status and new challenges in terms of market mechanism reform, supply-consumption balance and key technology innovation in China's oil and gas industry are reviewed in the present study, and new strategies and roadmaps are proposed to cope with the challenges. The study found that (i) the oil and gas market faces challenges such as incomplete pricing mechanisms, unclear subject rights, and the lack of recognition and trading of carbon assets. (ii) the trade-off between short-term supply security and long-term low-carbon supply is the most critical issue. (iii) in addition to typical challenges such as immature technology and lack of funding support, the unclear multiple technology coupling development mode also poses problems for the low-carbon transformation of the oil and gas industry. To address these new challenges, comprehensive strategies and roadmaps for China's oil and gas industry towards carbon neutrality are proposed and discussed in the aspects of participating in market transactions, restructuring production and consumption, deploying key technology innovations, and planning enterprise strategies. The present study is expected to provide a blueprint for the future development of China's oil and gas industry towards carbon neutrality.

A novel nanofluid of modified carbon black nanoparticles for enhanced oil recovery in low permeability reservoirs

A novel nanofluid of modified carbon black(MCB)nanoparticles was initially developed for enhanced oil recovery(EOR)in low permeability reservoirs.The MCB nanoparticles were obtained via a three-step reaction involving modification by oxidation,acyl chlorination,and activated grafting.MCB nano-particles were spherically dispersed,with an average size of 72.3 nm.Compared with carbon black(CB)nanoparticles,dispersed MCB nanoparticles can effectively reduce the oil-water interfacial tension(IFT)to 10^(-2)mN/m and change the surface wettability of sand particles.Based on the results of core flooding experiments,the MCB nanoparticles exhibited a better EOR capacity than surfactants and CB nano-particles,and the final oil recovery was significantly increased by 27.27%.The core scanning test showed that the MCB nanoparticles could plug high permeability channels by adsorbing onto the surfaces of sand particles and forming larger aggregates that bridge across pores or throats,resulting in a higher swept volume.The synergistic effects of improved swept volume and oil displacement efficiency were the EOR mechanisms of the MCB nanoparticles.The studies indicate that these MCB nanoparticles have excellent potential for EOR in low permeability reservoirs.

Processes for the Clarification of the Crude Oil of Baobab Seeds Extracted by Pressing on Activated Carbon Elaborated from the Capsules of the Fruit (Adansonia digitata L.)

The baobab, Adansonia digitata L. plays an important role in the economy of local populations. The oil from the seeds of the baobab fruit is nowadays highly prized because of its numerous cosmetic and therapeutic applications and its composition of unsaturated fatty acids, sterols and tocopherols. However, unlike refined oils, locally extracted baobab oil has not undergone purification operations to ensure its quality. Only a filtration on special cloths is carried out after decantation. Indeed, the oil obtained after pressing is cloudy because of the presence of various impurities. It therefore requires treatment operations to make it more attractive and of higher quality. Therefore, in order to provide innovative solutions to local companies to improve the quality of vegetable oils, a study of clarification (treatment) of crude oil is necessary. An experimental device has been developed in the laboratory. It includes a glass column and a filter bed of dune sand and activated carbon. This study has shown the efficiency of the experimental device. Indeed, the activated carbon, thanks to its adsorbing power, has allowed a significant decrease in turbidity at the 5% threshold, from 14.61 NTU for the raw oil to 0.08 NTU for the oil filtered on 3% carbon and 0.033 NTU for the oil filtered on 5% carbon. That is to say an abatement higher than 95%. This decrease in turbidity could be correlated with the decrease in brown index from 187.39a for the initial crude oil to 128.53d for the oil treated with 3% activated carbon versus 187.59a for the oil filtered on cloths. The lowest brown index was observed with the filtration using 5% activated carbon (35.99b). Thus, for the yellowness index, only the filtration on 5% charcoal allowed to obtain a significant decrease in yellowness. The yellowing index of the oil with 5% was 44.67b against 79.04a for the oil filtered with 3% activated carbon, 86.33a for the crude oil and 86.46a for the oil filtered on cloths. Finally, the oil sample treated with 5% activated carbon had the clearest clarity than the other samples with a clarity (L) equal to 97.98c against 95.63d for the oil treated with 3% carbon and 94.99b for the oil filtered on filter cloths. According to the results obtained, the experimental device made it possible to obtain a clearer baobab oil with a low brown index, thus improving the sensory quality of the oil.

CO_(2)flooding in shale oil reservoir with radial borehole fracturing for CO_(2)storage and enhanced oil recovery

This study introduces a novel method integrating CO_(2)flooding with radial borehole fracturing for enhanced oil recovery and CO_(2)underground storage,a solution to the limited vertical stimulation reservoir volume in horizontal well fracturing.A numerical model is established to investigate the production rate,reservoir pressure field,and CO_(2)saturation distribution corresponding to changing time of CO_(2)flooding with radial borehole fracturing.A sensitivity analysis on the influence of CO_(2)injection location,layer spacing,pressure difference,borehole number,and hydraulic fractures on oil production and CO_(2)storage is conducted.The CO_(2)flooding process is divided into four stages.Reductions in layer spacing will significantly improve oil production rate and gas storage capacity.However,serious gas channeling can occur when the spacing is lower than 20 m.Increasing the pressure difference between the producer and injector,the borehole number,the hydraulic fracture height,and the fracture width can also increase the oil production rate and gas storage rate.Sensitivity analysis shows that layer spacing and fracture height greatly influence gas storage and oil production.Research outcomes are expected to provide a theoretical basis for the efficient development of shale oil reservoirs in the vertical direction.

The organic geochemistry of crude oil in the Saltpond Basin(Ghana):Organic source input,depositional environment,and thermal maturity

The Saltpond Basin,situated within the South Atlantic margin of Ghana,is a significant area for petro-leum exploration but has received relatively limited research attention.Previous studies have examined source rock com-position,but data on crude oil organic chemistry are lack-ing,hindering understanding of the basin’s petroleum system and evolution.To address this gap,we analyzed biomarkers and stable carbon-isotope ratios in Saltpond Basin crude oil using gas chromatography–mass spectrometry and gas chromatography–isotope ratio mass spectrometry to eluci-date organic matter source,depositional environment,and thermal maturity.Findings were compared with oils from the West African segment of the South Atlantic margin,namely the Tano Basin and the Niger Delta Basin,to iden-tify potential correlations and gain insights into regional variations.Molecular and isotopic results unveiled a sig-nificant prevalence of organic matter derived from lower marine organisms.Patterns of organic matter deposition and preservation in Saltpond oil samples suggested a suboxic marine transitional environment,contradicting conventional understanding of terrestrial dominance in such settings.Moreover,the potential for degradation processes to obscure differentiation between terrestrial and marine organic mat-ter origins underscores the complex nature of organic mat-ter dynamics in transitional marine environments.Analysis of molecular thermal maturity indices suggested Saltpond oils were expelled from source rocks exhibiting thermal maturity at the early maturity stage.Correlation analysis unveiled genetic disparities among crude oils sourced from the Saltpond Basin and those from the Tano and Niger Delta Basin,primarily due to variations in source input and depo-sitional environment conditions.Saltpond oil exhibits lower terrestrial organic input than Tano Basin’s crude oils,which also have less terrestrial input than Niger Delta Basin crude oils.Additionally,its paleodepositional environment nota-bly differs from oils in the Tano Basin(anoxic transitional marine-lacustrine settings)and the Niger Delta Basin(sub-oxic–oxic terrigenous deltaic or marine or lacustrine envi-ronments).Thermal maturity range of Saltpond oil is com-parable to oils in the Tano Basin but lower than oils in the Niger Delta Basin.Thesefindings provide valuable insights into petroleum generation history and unique organic geo-chemical characteristics within the Saltpond Basin,essen-tial for exploration,production,and environmental manage-ment efforts in the region.Furthermore,correlation studies provide evidence that distinct biological,geological,and paleoenvironmental conditions shaped various oil types in the West African segment of the South Atlantic margin.

Statistical optimization of adsorption processes for removal of 2,4-dichlorophenol by activated carbon derived from oil palm empty fruit bunches

The adsorption capacity of activated carbon produced from oil palm empty fruit bunches through removal of 2,4-dichlorophenol from aqueous solution was carried out in the laboratory. The activated carbon was produced by thermal activation of activation time with 30 min at 800℃. The adsorption process conditions were determined with the statistical optimization followed by central composite design. A developed polynomial model for operating conditions of adsorption process indicated that the optimum conditions for maximum adsorption of phenolic compound were： agitation rate of 100 r/min, contact time of 8 h, initial adsorbate concentration of 250 mg/L and pH 4. Adsorption isotherms were conducted to evaluate biosorption process. Langmuir isotherm was more favorable （R^2=0.93） for removal of 2,4-dichlorophenol by the activated carbon rather than Freundlich isotherm （R^2=0.88）.

A study of the mechanism of enhancing oil recovery using supercritical carbon dioxide microemulsions

Supercritical carbon dioxide （scCO2） microemulsion was formed by supercritical CO2, H20, sodium bis（2-ethylhexyl） sulfosuccinate （AOT, surfactant） and C2HsOH （co-surfactant） under pressures higher than 8 MPa at 45 ℃. The fundamental characteristics of the scCO2 microemulsion and the minimum miscibility pressure （MMP） with Daqing oil were investigated with a high-pressure falling sphere viscometer, a high-pressure interfacial tension meter, a PVT cell and a slim tube test. The mechanism of the scCO2 microemulsion for enhancing oil recovery is discussed. The results showed that the viscosity and density of the scCO2 microemulsion were higher than those of the scCO2 fluid at the same pressure and temperature. The results of interfacial tension and slim tube tests indicated that the MMP of the scCO2 microemulsion and crude oil was lower than that of the scCO2 and crude oil at 45 ℃. It is the combined action of viscosity, density and MMP which made the oil recovery efficiency of the scCO2 microemulsion higher than that of the scCO2 fluid.

Microwave thermal remediation of crude oil contaminated soil enhanced by carbon fiber

Thermal remediation of the soil contaminated with crude oil using microwave heating enhanced by carbon fiber （CF） was explored. The contaminated soil was treated with 2.45 GHz microwave, and CF was added to improve the conversion of microwave energy into thermal energy to heat the soil. During microwave heating, the oil contaminant was removed from the soil matrix and recovered by a condensation system of ice-salt bath. The experimental results indicated that CF could efficiently enhance the microwave heating of soil even with relatively low-dose. With 0.1 wt.% CF, the soil could be heated to approximately 700℃ within 4 min using 800 W of microwave irradiation. Correspondingly, the contaminated soil could be highly cleaned up in a short time. Investigation of oil recovery showed that, during the remediation process, oil contaminant in the soil could be efficiently recovered without causing significant secondary pollution.

Types of Karst-fractured and Porous Reservoirs in China's Carbonates and the Nature of the Tahe Oilfield in the Tarim Basin

Almost all the oil and gas reservoirs developed in marine sedimentary strata of China have undergone processes of multi-phase reservoir formation and later modification. The irregular reservoirs are classified into three types as the Naxi, Tahe and Renqiu ones, increasing successively in the development degree of karstificated pores and fissures and the connection degree of independent reservoirs. In these reservoirs, the unity in the fluid feature, pressure and oil-gas-water interface also increases successively from the Naxi to the Renqiu type. The main body of Ordovician reservoirs of the Tahe Oilfield in the Tarim Basin is a network pool rather than a stratified, massive, stratigraphically-unconformed or weathering-crust one. The fluid nature of oil, gas and water, the interface positions and the pressures, as well as the dynamic conditions of fluids within the reservoirs during the production are all different from those in stratified or massive oil and gas reservoirs. Carbonates in the Akekule uplift and the Tahe Oilfield are assemblages of various types of reservoirs, which have an overall oil-bearing potential and obvious uneven distribution. Testing and producing tests are the major means to evaluate this type of reservoirs and acid fracturing improvement is a key link in petroleum exploration and development.

The impact of connate water saturation and salinity on oil recovery and CO2 storage capacity during carbonated water injection in carbonate rock

Carbonated water injection(CWI)is known as an efficient technique for both CO2 storage and enhanced oil recovery(EOR).During CWI process,CO2 moves from the water phase into the oil phase and results in oil swelling.This mechanism is considered as a reason for EOR.Viscous fingering leading to early breakthrough and leaving a large proportion of reservoir un-swept is known as an unfavorable phenomenon during flooding trials.Generally,instability at the interface due to disturbances in porous medium promotes viscous fingering phenomenon.Connate water makes viscous fingers longer and more irregular consisting of large number of tributaries leading to the ultimate oil recovery reduction.Therefore,higher in-situ water content can worsen this condition.Besides,this water can play as a barrier between oil and gas phases and adversely affect the gas diffusion,which results in EOR reduction.On the other hand,from gas storage point of view,it should be noted that CO2 solubility is not the same in the water and oil phases.In this study for a specified water salinity,the effects of different connate water saturations(Swc)on the ultimate oil recovery and CO2 storage capacity during secondary CWI are being presented using carbonate rock samples from one of Iranian carbonate oil reservoir.The results showed higher oil recovery and CO2 storage in the case of lower connate water saturation,as 14%reduction of Swc resulted in 20%and 16%higher oil recovery and CO2 storage capacity,respectively.

Co-optimization of carbon dioxide storage and enhanced oil recovery in oil reservoirs using a multi-objective genetic algorithm(NSGA-Ⅱ)

Climate researchers have observed that the carbon dioxide （CO2） concentration in the atmosphere have been growing significantly over the past century. CO2 from energy represents about 75% of the greenhouse gas （GHG） emissions for Annex B （Developed） countries, and over 60% of global emissions. Because of impermeable cap rocks hydrocarbon reservoirs are able to sequester CO〉 In addition, due to high-demand for oil worldwide, injection of CO2 is a useful way to enhance oil production. Hence, applying an efficient method to co-optimize CO2 storage and oil production is vital. Lack of suitable optimization techniques in the past led most multi-objective optimization problems to be tackled in the same way as a single objective optimization issue. However, there are some basic differences between the multi and single objective optimization methods. In this study, by using a non- dominated sorting genetic algorithm （NSGA-II） for an oil reservoir, some appropriate scenarios are proposed based on simultaneous gas storage and enhanced oil recovery optimization. The advantages of this method allow us to amend production scenarios after implementing the optimization process, by regarding the variation of economic parameters such as oil price and CO2 tax. This leads to reduced risks and time duration of making new decisions based on upcoming situations.

Enhanced oil recovery from carbonate reservoirs by spontaneous imbibition of low salinity water

An experimental study was performed to investigate the impact of low salinity water on wettability alteration in carbonate core samples from southern Iranian reservoirs by spontaneous imbibition. In this paper, the effect of temperature, salinity,permeability and connate water were investigated by comparing the produced hydrocarbon curves. Contact angle measurements were taken to confirm the alteration of surface wettability of porous media. Oil recovery was enhanced by increasing the dilution ratio of sea water, and there existed an optimum dilution ratio at which the highest oil recovery was achieved. In addition, temperature had a very significant impact on oil recovery from carbonate rocks. Furthermore, oil recovery from a spontaneous imbibition process was directly proportional to the permeability of the core samples. The presence of connate water saturation inside the porous media facilitated oil production significantly. Also, the oil recovery from porous media was highly dependent on ion repulsion/attraction activity of the rock surface which directly impacts on the wettability conditions. Finally, the highest ion attraction percentage was measured for sodium while there was no significant change in pH for all experiments.

Removal of phenol by activated carbons prepared from palm oil mill effluent sludge

The study was attempted to produce activated carbons from palm oil mill effluent （POME） sludge. The adsorption capacity of the activated carbons produced was evaluated in aqueous solution of phenol. Two types of activation were followed, namely, thermal activation at 300, 500 and 800%, and physical activation at 150% （boiling treatment）. A control （raw POME sludge） was used to compare the adsorption capacity of the activated carbons produced. The results indicated that the activation temperature of 800℃ showed maximum absorption capacity by the activated carbon （POME 800） in aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon of POME 800. It was observed that the adsorption capacity was higher at lower values ofpH （2--3） and higher value of initial concentration of phenol （200--300 mg/L）, The equilibrium data were fitted by the Langmuir and Freundlich adsorption isotherms. The adsorption of phenol onto the activated carbon POME 800 was studied in terms of pseudo-first and second order kinetics to predict the rate constant and equilibrium capacity with the effect of initial phenol concentrations. The rate of adsorption was found to be better correlation for the pseudo-second order kinetics compared to the first order kinetics.

Efficiency of enhanced oil recovery by injection of low-salinity water in barium-containing carbonate reservoirs

When low-salinity water containing sulfate ions is injected into carbonate reservoirs, rock dissolution and in situ precipitation occur, altering rock permeability and wettability. Particularly, when barium ions are present in formation water,they react chemically with SO;, and BaSO;is precipitated. These reactions can cause a serious impact on the efficiency of enhanced oil recovery（EOR）. Therefore, the main purpose of this study was to identify EOR efficiency induced by lowsalinity waterflooding（LSWF） when Ba;is present in carbonate reservoirs. From the experimental results, it was confirmed that the permeability calculated by the measured pressure difference was improved because of rock dissolution predominating over in situ precipitation for the case of low Ba;concentrations. In the analysis of wettability alteration through the measurements of relative permeabilities before and after LSWF, the higher Ba;concentration case consumed more SO;in precipitating the BaSO;, resulting in weaker wettability alteration due to the reduction of sulfate activity.These phenomena ultimately influenced EOR efficiency, i.e., the oil recovery was greater for the lower Ba;concentration.