The coating layers of Tri-structural Isotropic Particles(TRISO)serve to protect the kernel and act as barriers to fission products.Sintering aids in the silicon carbide matrix variably react with TRISO coating layers,...The coating layers of Tri-structural Isotropic Particles(TRISO)serve to protect the kernel and act as barriers to fission products.Sintering aids in the silicon carbide matrix variably react with TRISO coating layers,leading to the destruction of the coating layers.Investigating how carbon content affects element diffusion in silicon carbide-based TRISO composite fuel is of great significance for predicting reactor safety.In this study,silicon carbide-based TRISO composite fuels with different carbon contents were prepared by adding varying amounts of phenolic resin to the silicon carbide matrix.X-ray Diffraction(XRD)and Scanning Electron Microscopy(SEM)were employed to characterize the phase composition,morphology,and microstructure of the composite fuels.The elemental content in each coating layer of TRISO was quantified using Energy-Dispersive X-ray Spectroscopy(EDS).The results demonstrated that the addition of phenolic resin promoted the uniform distribution of sintering aids in the silicon carbide matrix.The atomic percentage(at.%)of aluminum(Al)in the pyrolytic carbon layer of the TRISO particles reached its lowest value of 0.55%when the phenolic resin addition was 1%.This is because the addition of phenolic resin caused the Al and silicon(Si)in the matrix to preferentially react with the carbon in the phenolic resin to form a metastable liquid phase,rather than preferentially consuming the pyrolytic carbon in the outer coating layer of the TRISO particles.The findings suggest that carbon addition through phenolic resin incorporation can effectively mitigate the deleterious reactions between the TRISO coating layers and sintering aids,thereby enhancing the durability and safety of silicon carbide-based TRISO composite fuels.展开更多
Solid-phase-sintered Si C-based composites with short carbon fibers（Csf/SSi C） in concentrations ranging from 0 to 10wt% were prepared by pressureless sintering at 2100°C. The phase composition, microstructure,...Solid-phase-sintered Si C-based composites with short carbon fibers（Csf/SSi C） in concentrations ranging from 0 to 10wt% were prepared by pressureless sintering at 2100°C. The phase composition, microstructure, density, and flexural strength of the composites with different Csf contents were investigated. SEM micrographs showed that the Csf distributed in the SSi C matrix homogeneously with some gaps at the fiber/matrix interfaces. The densities of the composites decreased with increasing Csf content. However, the bending strength first increased and then decreased with increasing Csf content, reaching a maximum value of 390 MPa at a Csf content of 5wt%, which was 60 MPa higher than that of SSi C because of the pull-out strengthening mechanism. Notably, Csf was graphitized and damaged during the sintering process because of the high temperature and reaction with boron derived from the sintering additive B4C; this graphitization degraded the fiber strengthening effect.展开更多
In order to improve oxidation resistance and ther- mal shock resistance of Al2O3-C refractories, two groups of specimens were prepared with phenolic resin as binder, adding 0, 2 wt% , 4 wt% and 6 wt% commercial SiC or...In order to improve oxidation resistance and ther- mal shock resistance of Al2O3-C refractories, two groups of specimens were prepared with phenolic resin as binder, adding 0, 2 wt% , 4 wt% and 6 wt% commercial SiC or ZrO2-SiC composite powder synthesized from zircon respectively to Al2O3- C refractories, pressing at 200 MPa, drying fully at 250℃, and then carbon embedded firing at 1400℃ for 2 h. Oxidation resistance and thermal shock resistance were researched, phase composition was analyzed by XRD. The results showed that the oxidation of SiC in additives could protect carbon in specimens effectively and thus decreased the mass loss ratio and oxidation area, and improved the oxidation resistance of the specimen. Thermal shock resistance was improved owing to the micro crack toughening of ZrO2 and grain toughening of SiC. In this experiment, the specimens with 6 wt% ZrO2 -SiC composite powder or 6 wt% SiC powder had the best oxidation resistance and thermal shock resistance.展开更多
Al2O3-SiC-C specimens were prepared using white fused corundum （3-1,≤1 and ≤0.044 mm）,Al2O3-SiC composite powders （d50 ≤ 5 μm）,α-Al2O3 micropowder （d50 =1.2 μm）,SiC powder （≤ 0.044 mm）,flake graphite （...Al2O3-SiC-C specimens were prepared using white fused corundum （3-1,≤1 and ≤0.044 mm）,Al2O3-SiC composite powders （d50 ≤ 5 μm）,α-Al2O3 micropowder （d50 =1.2 μm）,SiC powder （≤ 0.044 mm）,flake graphite （≤ 0.088 mm）,Si powder （d50 =42.8 μm） and B4C powder （d50 ≤10 μm） as main starting materials,and thermosetting phenolic resin as binder.4%,8%,12% and 16% （in mass,the same hereinafter） of Al2O3-SiC composite powders substituted the same quantity of α-Al2O3 micropowder ＋ SiC powder.Effects of composite powder additions on apparent porosity,bulk density,cold modulus of rupture,cold crushing strength,hot modulus of rupture （1 400 ℃）,thermal shock resistance （1 100 ℃,water quenching） and oxidation resistance （1 000 and 1 500 ℃） of Al2O3-SiC -C specimens after 180 ℃ curing,1 000 ℃ 3 h carbon-embedded firing and 1 500 ℃ 3 h carbon-embedded firing,respectively,were researched.The results indicate that：（1） with the increase of Al2O3-SiC composite powder,cold strengths of the cured specimens decline,those of the specimens fired at 1 000 ℃ change a little,and those of the specimens fired at 1 500 ℃ change a little except for an obvious improvement of cold crushing strength ; （2） with the increase of Al2O3-SiC composite powder,hot modulus of rupture at 1 400 ℃ decreases and thermal shock resistance enhances significantly; （3） when Al2O3-SiC composite powder addition is 4%,the oxidation resistance at 1 500 ℃ is the best,and the reason may be the composite powder is finer and more active,which is beneficial to form dense mullite protective layer to retard the O2 diffusion into the specimens.展开更多
基金funded by the Shanghai Academic/Technology Research Leader(Project No.21XD1432000).
文摘The coating layers of Tri-structural Isotropic Particles(TRISO)serve to protect the kernel and act as barriers to fission products.Sintering aids in the silicon carbide matrix variably react with TRISO coating layers,leading to the destruction of the coating layers.Investigating how carbon content affects element diffusion in silicon carbide-based TRISO composite fuel is of great significance for predicting reactor safety.In this study,silicon carbide-based TRISO composite fuels with different carbon contents were prepared by adding varying amounts of phenolic resin to the silicon carbide matrix.X-ray Diffraction(XRD)and Scanning Electron Microscopy(SEM)were employed to characterize the phase composition,morphology,and microstructure of the composite fuels.The elemental content in each coating layer of TRISO was quantified using Energy-Dispersive X-ray Spectroscopy(EDS).The results demonstrated that the addition of phenolic resin promoted the uniform distribution of sintering aids in the silicon carbide matrix.The atomic percentage(at.%)of aluminum(Al)in the pyrolytic carbon layer of the TRISO particles reached its lowest value of 0.55%when the phenolic resin addition was 1%.This is because the addition of phenolic resin caused the Al and silicon(Si)in the matrix to preferentially react with the carbon in the phenolic resin to form a metastable liquid phase,rather than preferentially consuming the pyrolytic carbon in the outer coating layer of the TRISO particles.The findings suggest that carbon addition through phenolic resin incorporation can effectively mitigate the deleterious reactions between the TRISO coating layers and sintering aids,thereby enhancing the durability and safety of silicon carbide-based TRISO composite fuels.
基金financially supported by the Specialized Research Fund for the Doctoral Program of Higher Education of China(No.20110006110025)the National Natural Science Foundation of China(No.U1134102)
文摘Solid-phase-sintered Si C-based composites with short carbon fibers（Csf/SSi C） in concentrations ranging from 0 to 10wt% were prepared by pressureless sintering at 2100°C. The phase composition, microstructure, density, and flexural strength of the composites with different Csf contents were investigated. SEM micrographs showed that the Csf distributed in the SSi C matrix homogeneously with some gaps at the fiber/matrix interfaces. The densities of the composites decreased with increasing Csf content. However, the bending strength first increased and then decreased with increasing Csf content, reaching a maximum value of 390 MPa at a Csf content of 5wt%, which was 60 MPa higher than that of SSi C because of the pull-out strengthening mechanism. Notably, Csf was graphitized and damaged during the sintering process because of the high temperature and reaction with boron derived from the sintering additive B4C; this graphitization degraded the fiber strengthening effect.
文摘In order to improve oxidation resistance and ther- mal shock resistance of Al2O3-C refractories, two groups of specimens were prepared with phenolic resin as binder, adding 0, 2 wt% , 4 wt% and 6 wt% commercial SiC or ZrO2-SiC composite powder synthesized from zircon respectively to Al2O3- C refractories, pressing at 200 MPa, drying fully at 250℃, and then carbon embedded firing at 1400℃ for 2 h. Oxidation resistance and thermal shock resistance were researched, phase composition was analyzed by XRD. The results showed that the oxidation of SiC in additives could protect carbon in specimens effectively and thus decreased the mass loss ratio and oxidation area, and improved the oxidation resistance of the specimen. Thermal shock resistance was improved owing to the micro crack toughening of ZrO2 and grain toughening of SiC. In this experiment, the specimens with 6 wt% ZrO2 -SiC composite powder or 6 wt% SiC powder had the best oxidation resistance and thermal shock resistance.
文摘Al2O3-SiC-C specimens were prepared using white fused corundum （3-1,≤1 and ≤0.044 mm）,Al2O3-SiC composite powders （d50 ≤ 5 μm）,α-Al2O3 micropowder （d50 =1.2 μm）,SiC powder （≤ 0.044 mm）,flake graphite （≤ 0.088 mm）,Si powder （d50 =42.8 μm） and B4C powder （d50 ≤10 μm） as main starting materials,and thermosetting phenolic resin as binder.4%,8%,12% and 16% （in mass,the same hereinafter） of Al2O3-SiC composite powders substituted the same quantity of α-Al2O3 micropowder ＋ SiC powder.Effects of composite powder additions on apparent porosity,bulk density,cold modulus of rupture,cold crushing strength,hot modulus of rupture （1 400 ℃）,thermal shock resistance （1 100 ℃,water quenching） and oxidation resistance （1 000 and 1 500 ℃） of Al2O3-SiC -C specimens after 180 ℃ curing,1 000 ℃ 3 h carbon-embedded firing and 1 500 ℃ 3 h carbon-embedded firing,respectively,were researched.The results indicate that：（1） with the increase of Al2O3-SiC composite powder,cold strengths of the cured specimens decline,those of the specimens fired at 1 000 ℃ change a little,and those of the specimens fired at 1 500 ℃ change a little except for an obvious improvement of cold crushing strength ; （2） with the increase of Al2O3-SiC composite powder,hot modulus of rupture at 1 400 ℃ decreases and thermal shock resistance enhances significantly; （3） when Al2O3-SiC composite powder addition is 4%,the oxidation resistance at 1 500 ℃ is the best,and the reason may be the composite powder is finer and more active,which is beneficial to form dense mullite protective layer to retard the O2 diffusion into the specimens.
