Trace Determination of Scandium Using Adsorption Voltammetry of Mix-Polynuclear Complex of Scandium-Calcium-Alizarin Red S at Carbon Paste Electrode

A novel method was described for the determination of ultra trace amount of scandium based on the cathodic adsorptive voltammetry of the mix-polynuclear complex of scandium-calcium-alizarin red S at a carbon paste electrode (CPE). The 2nd-order derivative linear scan voltammograms of the adsorbed complex were recorded by model JP-303 polarographic analyzer from 0.0 to -1.0 V (vs. SCE). The experimental conditions of the working procedure were optimized. The results show that the complex can be adsorbed on the surface of the CPE, yielding one peak at -0.61 V, corresponding to the reduction of the alizarin red S in the mix-polynuclear complex at the electrode. The detection limit of Sc^(3+) is 1.0×10^(-10) mol·L^(-1) for 3 min of accumulation time. The procedure was successfully applied to the determination of trace amount of scandium in the sample ores.

Trace Determination of Zirconium(Ⅳ) by Anodic Adsorptive Voltammetry at a Carbon Paste Electrode

A new sensitive adsorptive voltammetric method was described for the determination of zirconium at a carbon paste electrode (CPE) in the presence of alizarin complexone (ALC). Optimal analytical conditions are: 1.0?0-6 or 5.0?0-7 mol/L ALC, 0. 20 mol/L HAC-NaAc (pH 4.3), accumulation for 60 s at 0 V (vs. SCE), and linear scanning from 0 V to 1.0 V at 250 mV/s. The peak potential of the complex is at 0.81 V. By using a model JP-303 polarographic analyzer, 2.0?0-10 mol/L (S/N=3) zirconium can be detected with a 90 s accumulation, when the 2nd-order derivative linear sweep technique is used, and the linear range is 6.0?0-10-2.0?0-8 mol/L (5.0?0-7 mol/L ALC) and 2.0?0-8-2.0?0-7 mol/L (1.0?0-6 mol/L ALC), respectively. The developed method was applied to the determination of trace zirconium in the ore samples with satisfactory results.

Electrochemical determination of vitamin C in the presence of uric acid by a novel TiO_2 nanoparticles modified carbon paste electrode

The electrochemical behavior of vitamin C（ascorbic acid or AA） is investigated on the surface of a carbon-paste electrode modified with TiO2 nanoparticles and 2,2＇-（1,2 butanediylbis（nitriloethylidyne））-bis-hydroquinone（BBNBH）.The prepared modified electrode showed an efficient catalytic role in the electrochemical oxidation of AA,leading to remarkable decrease in oxidation overpotential and enhancement of the kinetics of the electrode reaction.This modified electrode exhibits well-separated oxidation peaks for AA and uric acid（UA）.The modified electrode is successfully applied for the accurate determination of AA in pharmaceutical preparations.

Electrocatalytic Oxidation of H_2 O_ 2 at a Carbon Paste Electrode Modified with a Nickel (Ⅱ)-5,11,17,23-Tetra-Tert-Butyl-25,27-Bis(Diethylcarbamoylmethoxy)Calix[4] Arene Complex and Its Application

Electrochemical behavior of a carbon paste electrode (CPE) modified with nickel(II)\|5, 11, 17, 23\|tetra\|tert\|butyl\|25, 27\|bis(diethylcarbamoylmethoxy)calix\arene (Ni(Ⅱ)\|L) complex and its electrocatalytic activity towards the oxidation of hydrogen peroxide were investigated by cyclic voltammetric technique in a 5.0×10 -2 mol/L NaClO 4+ 1.0×10 -3 mol/L NaOH solution. It was found that Ni(II)\|L acts as an effective catalyst for the oxidation of hydrogen peroxide. The modified electrode exhibited a linear response over a hydrogen peroxide concentrations in the range of 2.0×10 -6 \|1.0×10 -4 mol/L with a detection limit as low as 1.0×10 -6 mol/L. The relative standard deviation was 3.5% for 5 successive determinations of H 2 O 2 at 1.0×10 -5 mol/L. The modified electrode was used successfully in rainwater analysis.

Cyclam Modified Carbon Paste Electrode as a Potentiometric Sensor For Determination of Cobalt(Ⅱ) Ions

A new modified carbon paste electrode based on cyclam as a modifier was prepared for the determination of Co(Ⅱ) ions. The proposed electrode shows a Nernstian slope 28.4 mV per decade over a wide concentration range 5.0×10 -6_1.0×10 -1 mol/L of Co 2+ ions with detection limit 2.5×10 -6 mol/L. The sensor exhibits good selectivities for Co 2+ over a wide variety of other cations. It can be used as an indicator electrode in potentiometric titration of cobalt(Ⅱ) ions as well as in direct determination of cobalt(Ⅱ) ions in wastewater of acidic cobalt electroplating bath. The electrode shows Nernestian behavior in a solution of 25% ethanol.

Mixed Binder Carbon Paste Electrode for Quantitation of Isoniazid in Serum

This paper covers the construction and behaviour of a mixed binder carbon paste electrode system appropriate for the cathodic stripping voltammetric quantitation of iso-niazid. The mixed binder consisted of glycerol and liquid paraffin. At the mixed binder carbon paste electrodes in a pH 3.0 buffer solution, isoniazid showed two sensitive cathodic stripping voltammetric wave at-0. 75 V (p1) and-0. 88 V (p2) , respectively. The p2 can be used for the determination of trace amounts of isoniazid, the linear range of the peak current to the isoniazid concentration being from 5. 0×10-7 to 5.0×10-5 mol/L, and the limit of detection being 1. 0×10-7 mol/L with a relative standard deviation of 6. 0%(n=10). The proposed method was directly used to determine the drug in blood serum without the pretreatment of blood serum.

SBA-15 Modified Carbon Paste Electrode for Rapid cTnI Detection with Enhanced Sensitivity

A novel electrochemical immunoassay for cardiac troponin Ⅰ （cTnI） combining the concepts of the dual monoclonal antibody ＂sandwich＂ principle, the silver enhancement on the nano-gold particle, and the SBA-15 mesoporous modified carbon paste electrode （SBA-MCPE） is described. Four main steps were carried out to obtain the analytical signal, i.e., electrode preparation, immunoreaction, silver enhancement, and anodic stripping voltammetric detection. A linear relationship between the anodic stripping peak current and concentration of cTnI from 0.5 to 5.0 ng/mL and a limit of detection of 0.2 ng/mL of cTnI were obtained.

Gold Nanoparticle-based Layer-by-Layer Enhancement of DNA Hybridization Electrochemical Signal at Carbon Nanotube Modified Carbon Paste Electrode

Colloid gold nanoparticle-based layer-by-layer amplification approach was applied to enhance the electrochemical detection sensitivity of DNA hybridization at carbon nanotube modified carbon paste electrodes （CNTPEs）. Streptavidin was immobilized onto the surface of CNTPEs, and the conjugation of biotin labeled target oligonucle,otides to the above immobilized streptavidin was performed, followed by the hybridization of target oligonucleotides with the gold nanoparticle-labeled DNA probe and then the layer-by-layer enhanced connection of gold nanoparticles, on which oligonucleotides complementary to the DNA probe were attached, to the hybridization system. The differential pulse voltammetry （DPV） signal of total gold nanoparticles was monitored. It was found that the layer-by-layer colloidal gold DPV detection enhanced the sensitivity by about one order of magnitude compared with that of one-layer detection. One-base mismatched DNA and complementary DNA could be distinguished clearly.

Voltammetric Determination of Estrogens Based on the Enhancement Effect of Surfactant at Carbon Paste Electrode

Highly sensitive voltammetric method for the determination of estrogens, based on the enhancement effect of cetyltrimethylammonium bromide (CTAB) has been described. In the presence of CTAB, the oxidation peak currents of estrogens (estradiol, estrone, estriol, estradiol valerate and diethylstilbestrol) as the carbon paste electrode (CPE) increased significantly after open-circuit accumulation. The peak current was proportional to the concentration of estradiol over the range from 5×10?9 to 2.5×10?6 mol·L?1. The detection limit was 8×10?10 mol·L?1 at 6 min of accumulation. The total amounts of estrogens in the blood serums were determined and the average recovery was 104.92%. Under the conditions used, the electrode process of estradiol was examined the mechanism for peak current enhancement was also discussed.

Studies on Zeolite Modified Electrode(Ⅰ)─Ascorbic Acid Sensor Based on Carbon Paste Electrode Containing Fe(Ⅲ)Y Zeolite

A new ascorbic acid sensor constituted of carbon paste and Fe(Ⅲ)Y zeolite was studied.The characters of the sensor such as linear range. potential window、apparen Michaelis constant、response time、stability and accuracy wee investigated. The experimental results indicate that the analytical performance of the sensor is satisfactory.

The attachment of Staphylococcus epidermidis on the surface of a carbon paste electrode at various positive potentials:The effect of pH,incubation time,and solid-medium type

The attachment of Staphylococcus epidermidis to the surface of carbon paste electrode (CPE) by applying positive potentials (50 - 600 mV) with regard of various buffer pH, cultivation time and solid-medium type was studied. The attachment process was analyzed by measuring the electric current derived from the dye (amido black) adsorbed on the vacant areas of CPE after attachment of microbial cells. The pH was not identified as a single main factor affecting the attachment (p > 0.05), however further insight revealed that the potentials applied had different effects on the microbial cells attachment. Both cultivation time and solid-medium type significantly affected the microbial attachment. Generally, increase of cultivation time up to 168 h resulted in increase of adhesion. Applying potentials 300, 400 and 200 mV resulted in the highest attachment process for bacteria cultivated for 24, 48 and 168 h, respectively. S. epidermidis cultivated on the blood agar and Baird-Parker agar plates showed the higher extent of attachment.

Trace detection of Ce^(3+) by adsorption strip voltammetry at a carbon paste electrode modified with ion imprinted polymers

To develop a convenient method for sensitive and selective determination of Ce3＋ in aqueous phase with complicated matrices, a carbon paste electrode（CPE） modified with ion imprinted polymers（IIPs） were fabricated. The polymers were prepared by precipitation polymerization using Ce3＋ as template, allyl phenoxyacetate（APA） as monomer, ethylene glycol dimethacrylate（EGDMA） as crosslinker and azobisisobutyronitrile（AIBN） as initiator under the molar ratio of Ce3＋, APA and EGDMA as 1：4：40, respectively. Ce3＋ was detected directly by differential pulse adsorptive stripping voltammetry（DPASV） and its oxidation peak appears at about 0.93 V. All parameters affecting the sensor＇s response are optimized and a calibration curve is plotted at a linear range of 1.0 × 10^（-6）-1.0 x 10^（-5） mol/L and 1.0×10^（-5）-2.0 × 10^（-4）mol/L with the detection limit of 1.5 × 10^（-7） mol/L. All other rare earth ions have no interference with the determination of Ce^（3＋） even at a concentration 500 times higher than that of Ce^（3＋）.This sensor was successfully applied to determination of Ce^（3＋） in two catalyst sample solutions with RSD≤3.3%（n = 5）and recoveries in the range of 99.2%-106.5% at our optimal conditions.

Electrochemical sensor for Cd2+ and Pb2+ detection based on nano-porous pseudo carbon paste electrode

An electrochemical sensor based on self-made nano-porous pseudo carbon paste electrode(nano-PPCPE)has been successfully developed,and used to detect Cd^2+ and Pb^2+.The experimental results showed that the electrochemical performance of nanoPPCPE is evidently better than both glassy carbon electrode(GCE)and pure carbon paste electrode(CPE).Then the prepared nano-PPCPE was applied to detect Cd^2+ and Pb^2+in standard solution,the results showed that the electrodes can quantitatively detect trace Cd^2+ and Pb^2+,which has great significance in electrochemical analysis and detection.The linear ranges between the target ions concentration and the D PASV current were from 0.1-3.0 μmol/L,0.05-4.0 μmol/L for Cd^2+ and Pb^2+,respectively.And the detection limits were 0.0780 μmol/L and 0.0292 μmol/L,respectively.Moreover,the preparation of the nano-PPCPE is cheap,simple and has important practical value.

CuO-nanoparticles modified carbon paste electrode for square wave voltammetric determination of lidocaine: Comparing classical and Box–Behnken optimization methodologies

In this research, copper oxide nanoparticles modified carbon paste electrode was developed for the voltammetric determination of lidocaine. The square wave voltammogram of lidocaine solution showed a well-defined peak between ＋0.5 and ＋1.5 V. Instrumental and chemical parameters influencing voltammetric response were optimized by both one at a time and Box–Behnken model of response surface methodology. The results revealed that there was no significant difference between two methods of optimization. The linear range was 1–2500 μmol L^-1（Ip= 0.11 C（LH）＋ 17.38, R^2= 0.999）. The LOD and LOQ based on three and ten times of the signal to noise（S/N） were 0.39 and 1.3 μmol L^-1（n = 10）,respectively. The precision of the method was assessed for 10 replicate square wave voltammetry（SWV）determinations each of 0.05, 0.5 and 1 μmol L^-1 of lidocaine showing relative standard deviations 4.1%,3.7% and 2.1%, respectively. The reliability of the proposed method was established by application of the method for the determination of lidocaine in two pharmaceutical preparations, namely injection and gel.

Inorganic-Organic Hybrid 18-Molybdodiphosphate Nanoparticles Bulk-modified Carbon Paste Electrode and Its Electrocatalysis

A kind of inorganic organic hybrid 18 molybdodiphosphate nanoparticles ([(C 4H 9) 4N] 6P 2Mo 18 O 62 ·4H 2O) was firstly used as a bulk modifier to fabricate a three dimensional chemically modified carbon paste electrode (CPE) by direct mixing. The electrochemical behavior of the solid nanoparticles dispersed in the CPE in acidic aqueous solution was characterized by cyclic and square wave voltammetry. The hybrid 18 molybdodiphosphate nanoparticles bulk modified CPE (MNP CPE) displayed a high electrocatalytic activity towards the reduction of nitrite, bromate and hydrogen peroxide. The remarkable advantages of the MNP CPE over the traditional polyoxometalates modified electrodes are their excellent reproducibility of surface renewal and high stability owing to the insolubility of the hybrid 18 molybdodiphosphate nanoparticles.

Carbon Paste Electrode Modified by Surfactant for Anodic Stripping Voltammetric Determination of Sulphadiazine

he present paper covers the construction and behaviour of a mixed binder car-bon paste electrode modified by surfactant system appropriate for the anodic strip-ping voltammetric quantitation of sulphadiazine. The mixed binder consisted ofglycerol and liquid paraffin. On this electrode in a PH 8. 20 buffer solution sulpha-diazine yields a sensitive anodic stripping voltammetric wave at 0. 82 V. It can beused for the determination of trace amounts of drug, the linear range of the peakcurrent to the sulphadiazine concentration being from 1. 0 x 10-7 to 5. 0 x 10-5mol/L, and the detection limit being 6. 6 x 10-9 mol/L with a relative standard de-viation of 2. 6% (n= 15).The proposed method was used to determine the drug inurine samples.

Catalytic Adsorptive Stripping Voltammetry at a Carbon Paste Electrode for the Determination of Amiodarone

Voltammetry using solid electrodes usually suffers from the contamination due to the deposition of the redox products of analytes on the electrode surface. The contamination has resulted in poor reproducibility and overelaborate operation procedures. The use of the chemical catalysis of oxidant on the reduction product of analyte not only can eliminate the contamination of analyte to solid electrodes but also can improve the faradaic response of analyte. This work introduced both the catalysis of oxidant K2S2O8 and the enhancement of surfactant Triton X-100 on the faraday response of amiodarone into an adsorptive stripping voltammetry at a carbon paste electrode for the determination of amiodarone. The method exhibits high sensitivity, good reproducibility and simple operation procedure. In 0.2 mol·L^-1 HOAc-NaOAc buffer （pH=5.3） containing 2.2×10^-2 mol·L^-1 K2S2O8 and 0.002% Triton X-100, the 2.5th-order derivative stripping peak current of the catalytic wave at 0.3 V （vs. Ag/AgCl） is rectilinear to amiodarone concentration in the range of 2.0×10^-10-2.3×10^-8 mol·L^-1 with a detection limit of 1.5×10^-10 mol·L^-1 after accumulation at 0 V for 30 s.

Determination of captopril in patient human urine using ferrocenemonocarboxylic acid modified carbon nanotubes paste electrode

In this work,we describe a new strategy for the electrochemical determination of captopril（CA） using ferrocenemonocarboxylic acid as a mediator and multiwall carbon nanotubes as sensors in aqueous solution at pH 7.0.The diffusion coefficient（D）,and the kinetic parameters such as electron transfer coefficient（α）.and heterogeneous rate constant（kh）,for CA were also determined using electrochemical approaches.Under the optimized conditions,the electrocatalytic oxidation peak current of captopril showed two linear dynamic ranges with a detection limit of 0.3×10^-6 mol L^-1 captopril.The linear calibration range was 0.8×10^（-6） to 65×10^-6 mol L^-1 using cyclic voltammetry.Finally,this modified electrode was also examined as a selective,simple and precise new electrochemical sensor for the determination of captopril in real samples such as drug and patient human urine.

Electrochemical behavior of insulin on pretreated carbon black electrode enhanced with silicon carbide nanostructure

We previously reported the direct electrochemical detection of insulin at bare carbon electrodes. Here a novel modified acetylene carbon black paste electrode(SiC/CB-CPE), based on the outstanding characteristics of silicon carbide nanostructure,was developed for the electrooxidation of insulin in alkaline solution and it was characterized by cyclic voltammetry(CV) and electrochemical impedance spectroscopy(EIS) in 5 mmol/L Fe(CN)63-/4- solution. It is found that silicon carbide nanostructure doped into the CB-CPE greatly facilitates the redox electrochemistry of Fe(CN)63-/4- probe and the electrochemical oxidation of insulin. The electrooxidation of insulin is a one-electron and one-proton reaction and an irreversible adsorption-controlled electrode process. The anodic oxidation current increases linearly with the concentration of insulin from 1×10-7mol/L to1.2×10-6mol/L in 0.1 mol/L Na2CO3-NaHCO3 buffer solution(pH 10.0) and the detection limit was 50 nmol/L. In addition, the SiC/CB-CPE shows good sensitivity, reproducibility, renewability and capacity of resisting disturbance.

Preparation, Electrochemical Property and Application in Bulk-modified Electrode of Dawson-type Phospho-molybdate-doped Polypyrrole Composite Nanoparticles

A kind of inorganic-organic hybrid semiconductor composite nanoparticles： Dawson-type phosphomolybdate- doped polypyrrole （P2Mo18-PPy） was designed and prepared using microemulsion oxidation-polymerization at room temperature and characterized by TEM and IR. The P2Mo18-PPy was used as a bulk-modifier to fabricate a chemically modified carbon paste electrode（CPE） by direct mixing, which represents the example of polyoxometalates（ POMs）- doped semiconductor polymer nanoparticles modified electrode. Both the advantage of POMs-doped polymer and the surface-renewal property of the CPE were fully utilized. The electrochemical behavior of the P2Mo18-PPY bulk-modified CPE（P2Mo18-PPy-CPE） was investigated with cyclic voltammetry. Three couples of reversible redox peaks were observed in the range from ＋ 800 to 0 mV, which corresponded to the reduction and oxidation through two-, four- and six-electron processes, respectively. The P2 Mo18-PPY-CPE showed a high electrocatalytic activity for the reduction of nitrite, which expanded the application of POMs-doped semiconductor polymer nanoparticles.