Coupling of BiOCl Ultrathin Nanosheets with Carbon Quantum Dots for Enhanced Photocatalytic Performance

Over the past few decades,photocatalysis technology has received extensive attention because of its potential to mitigate or solve energy and environmental pollution problems.Designing novel materials with outstanding photocatalytic activities has become a research hotspot in this field.In this study,we prepared a series of photocatalysts in which BiOCl nanosheets were modified with carbon quantum dots(CQDs)to form CQDs/BiOCl composites by using a simple solvothermal method.The photocatalytic performance of the resulting CQDs/BiOCl composite photocatalysts was assessed by rhodamine B and tetracycline degradation under visible-light irradiation.Compared with bare BiOCl,the photocatalytic activity of the CQDs/BiOCl composites was significantly enhanced,and the 5 wt%CQDs/BiOCl composite exhibited the highest photocatalytic activity with a degradation efficiency of 94.5%after 30 min of irradiation.Moreover,photocatalytic N_(2)reduction performance was significantly improved after introducing CQDs.The 5 wt%CQDs/BiOCl composite displayed the highest photocatalytic N_(2)reduction performance to yield NH_3(346.25μmol/(g h)),which is significantly higher than those of 3 wt%CQDs/BiOCl(256.04μmol/(g h)),7 wt%CQDs/BiOCl(254.07μmol/(g h)),and bare BiOCl(240.19μmol/(g h)).Our systematic characterizations revealed that the key role of CQDs in improving photocatalytic performance is due to their increased light harvesting capacity,remarkable electron transfer ability,and higher photocatalytic activity sites.

Small but mighty:Empowering sodium/potassium-ion battery performance with S-doped SnO_(2) quantum dots embedded in N,S codoped carbon fiber network

SnO_(2) has been extensively investigated as an anode material for sodium-ion batteries(SIBs)and potassium-ion batteries(PIBs)due to its high Na/K storage capacity,high abundance,and low toxicity.However,the sluggish reaction kinetics,low electronic conductivity,and large volume changes during charge and discharge hinder the practical applications of SnO_(2)-based electrodes for SIBs and PIBs.Engineering rational structures with fast charge/ion transfer and robust stability is important to overcoming these challenges.Herein,S-doped SnO_(2)(S-SnO_(2))quantum dots(QDs)(≈3 nm)encapsulated in an N,S codoped carbon fiber networks(S-SnO_(2)-CFN)are rationally fabricated using a sequential freeze-drying,calcination,and S-doping strategy.Experimental analysis and density functional theory calculations reveal that the integration of S-SnO_(2) QDs with N,S codoped carbon fiber network remarkably decreases the adsorption energies of Na/K atoms in the interlayer of SnO_(2)-CFN,and the S doping can increase the conductivity of SnO_(2),thereby enhancing the ion transfer kinetics.The synergistic interaction between S-SnO_(2) QDs and N,S codoped carbon fiber network results in a composite with fast Na+/K+storage and extraordinary long-term cyclability.Specifically,the S-SnO_(2)-CFN delivers high rate capacities of 141.0 mAh g^(−1) at 20 A g^(−1) in SIBs and 102.8 mAh g^(−1) at 10 A g^(−1) in PIBs.Impressively,it delivers ultra-stable sodium storage up to 10,000 cycles at 5 A g^(−1) and potassium storage up to 5000 cycles at 2 A g^(−1).This study provides insights into constructing metal oxide-based carbon fiber network structures for high-performance electrochemical energy storage and conversion devices.

Effective Activation of Melamine for Synchronous Synthesis of Catalytically Active Nanosheets and Fluorescence-Responsive Quantum Dots

Because of the low reactivity of cyclic nitrides,liquid-phase synthesis of carbon nitride introduces challenges despite its favorable potential for energy-efficient preparation and superior applications.In this study,we demonstrate a strong interaction between citric acid and melamine through experimental observation and theoretical simulation,which eff ectively activates melamine-condensation activity and produces carbon-rich carbon nitride nanosheets(CCN NSs)during hydrothermal reaction.Under a large specific surface area and increased light absorption,these CCN NSs demonstrate significantly enhanced photocatalytic activity in CO_(2) reduction,increasing the CO production rate by approximately tenfold compared with hexagonal melamine(h-Me).Moreover,the product selectivity of CCN NSs reaches up to 93.5%to generate CO from CO_(2).Furthermore,the annealed CCN NSs exhibit a CO conversion rate of up to 95.30μmol/(g h),which indicates an 18-fold increase compared with traditional carbon nitride.During the CCN NS synthesis,nitrogen-doped carbon quantum dots(NDC QDs)are simultaneously produced and remain suspended in the supernatant after centrifugation.These QDs disperse well in water and exhibit excellent luminescent properties(QY=67.2%),allowing their application in the design of selective and sensitive sensors to detect pollutants such as pesticide 2,4-dichlorophenol with a detection limit of as low as 0.04μmol/L.Notably,the simultaneous synthesis of CCN NSs and NDC QDs provides a cost-eff ective and highly efficient process,yielding products with superior capabilities for catalytic conversion of CO_(2) and pollutant detection,respectively.

Ultrafast Carrier Dynamics in CdSe/CdS/ZnS Quantum Dots

The intra- and inter-band relaxation dynamics of CdSe/CdS/ZnS core/shell/shell quantum dots are investigated with the aid of time-resolved nonlinear transmission spectra which are obtained using femtosecond pump-probe technique. By selectively exciting the core and shell carrier, the dynamics are studied in detail. Carrier relaxation is found faster in the conduction band of the CdS shell （about 130 fs） than that in the conduction band of the CdSe core （about 400 fs）. From the experiments it is distinctly demonstrated the existence of the defect states in the interface between the CdSe core and the CdS shell, indicating that ultrafast spectroscopy might be a suitable tool in studying interface and surface morphology properties in nanosystems.

Carbon Nitride Quantum Dots:A Novel Fluorescent Probe for Non-Enzymatic Hydrogen Peroxide and Mercury Detection

The mercury species in the ocean(MeHg,Hg^(2+))will be enriched in marine organisms and threaten human health through the food chain.While the excessive H_(2)O_(2)in the metabolic process will produce hydroxyl radicals and accelerate the aging of human cells,causing a series of diseases.Hence,the cost-effective and rapid detection of mercury and H_(2)O_(2)is of urgent requirement and significance.Here,we synthesized emerging graphitic carbon nitride quantum dots(g-CNQDs)with high fluorescence quantum yield(FLQY)of 42.69%via a bottom-up strategy by a facile one-step hydrothermal method.The g-CNQDs can detect the H_(2)O_(2)and Hg^(2+)through the fluorescence quenching effect between g-CNQDs and detected substances.With the presence of KI,g-CNQDs show concentration-dependent fluorescence toward H_(2)O_(2),with a wide detection range of 1–1000μmolL^(-1)and a low detection limit of 0.23μmolL^(-1).The g-CNQDs also show sensitivity toward Hg^(2+)with a detection range of 0–0.1μmolL^(-1)and a detection limit of 0.038μmolL^(-1).This dual-function detection of g-CNQDs has better practical application capability compared to other quantum dot detection.This study may provide a new strategy for g-CNQDs preparation and construct a fluorescence probe that can be used in various systems involving H_(2)O_(2)and Hg^(2+),providing better support for future bifunctional or multifunction studies.

Highly conjugated water soluble CdSe quantum dots to multiwalled carbon nanotubes

Highly conjugated multiwalled carbon nanotube-quantum dot heterojunctions were synthesized by ethylene carbodiimide coupling procedure. The functional multiwalled carbon nanotube with carboxylic groups on sidewall could react with the amino group of L-cysteine capped CdSe quantum dots and then resulted in nanotube-quantum dot heterojunctions. Scanning electron microscopy was used to characterize the heterojunctions.

Energy Transfer Dynamics between Carbon Quantum Dots and Molybdenum Disulfide Revealed by Transient Absorption Spectroscopy

Zero-dimensional environmentally friendly carbon quantum dots(CQDs)combined with two-di-mensional materials have a wide range of applications in optoelec-tronic devices.We combined steady-state and transient absorp-tion spectroscopies to study the energy transfer dynamics between CQDs and molybdenum disulfide(MoS_(2)).Transient absorption plots showed photoinduced absorption and stimulated emission features,which involved the intrinsic and defect states of CQDs.Adding MoS_(2)to CQDs solution,the lowest unoccupied molecular orbital of CQDs transferred energy to MoS_(2),which quenched the intrinsic emission at 390 nm.With addition of MoS_(2),CQD-MoS_(2)composites quenched defect emission at 490 nm and upward absorption,which originated from another energy transfer from the defect state.Two energy transfer paths between CQDs and MoS_(2)were efficiently manipulated by changing the concentration of MoS_(2),which laid a foundation for improving device performance.

碳量子点(CDs)耦合Annexin-V抗体复合物活体SD大鼠周围神经功能束鉴别的基础研究

目的:探寻术中可用的周围神经功能束鉴别的方法。方法:分组制备SD大鼠双侧股神经主干、股神经肌支及隐神经Sunderland V损伤模型,制备的Annexin V-碳量子点(Carbon quantumdots,CDs)抗体复合物涂抹神经断端,在380 nm紫外灯激发光源照射下,5、10、15和20 min后在荧光显微镜下观察荧光显色。结果:SD大鼠双侧股神经主干、股神经肌支及隐神经Sunderland V损伤断端染色5 min荧光强度不足以充分显示神经束;染色10~15 min强度明显增加,股神经主干的感觉束及隐神经在Annexin V-CDs抗体复合物染色下呈蓝色荧光,股神经主干的运动束及股神经肌支无荧光显示;染色20 min后荧光强度逐渐减弱。各分组组内样本染色5、10、15、20 min的染色强度无明显差异。结论:Annexin V-CDs抗体复合物能够实现术中SD大鼠周围神经功能束的鉴别。

CdS Quantum Dots as Fluorescence Probes for Detection of Adriamycin Hydrochloride

Water-soluble CdS quantum dots（CdS-QDs） capped with thioglycohc acid were easily prepared, and a detection method of adriamycin was presented based on the fluorescence quenching of CdS-QDs. It was found that a complex could be formed between cetyhrimethyl ammonium bromide（CTAB） and CdS-QDs by using electrostatic interaction in Britton-Robinson（BR） buffer at pH = 7.00, and the strong fluorescence emission of the complex was observed at 500 nm when the complex was excited at 378 run. The presence of adriamycin, however, could strongly quench the fluorescence through hydrophobic interaction. The overall quenching percentage as a function of adriamycin concentration matches the Stern-Volmer equation very well. These properties make CdS-QDs a potential fluorescence probe for the detection of adriamycin. The detection hmit（3σ） of adriamycin is approximately 10^-9 mol/L.

Citrate-stabilized CdSe/CdS quantum dots as fluorescence probe for protein determination

A rapid, ultrasensitive and convenient fluorescence measurement technology based on the enhancement of the fluorescence intensity resulting from the interaction of functionalized CdSe/CdS quantum dots （QDs） with bov/ne serum albumin （BSA） was proposed. The citrate-stabilized CdSe/CdS （QDs） were synthesized by using Se powder and Na2S as precursors instead of any pyrophoric organometallic precursors. The modified CdSe/CdS QDs are brighter and more stable against photobleaching in comparison with organic fluorophores. At pH 7.0, the fluorescence signal of CdSe/CdS is enhanced by increasing the concentration of BSA in the range of 0.1-10 μg/mL, and the low detection limit is 0.06 μg/mL. A linear relationship between the enhanced fluorescence peak intensity （△F） and BSA concentration （c） is established using equation △F=50.7c＋16.4 （R=0.996 36）. Results of determination for BSA in three synthetic samples are identical with the true values, and the recovery （98.9%-102.4%） and relative standard deviation （RSD, 1.8%-2.5%） are satisfactory.

Study on Interaction between Chitosan and CdS Quantum Dots via Photoluminescence Spectra

The interaction between CdS quantum dots and amino polysaccharide chitosan in aqueous solution was studied via photoluminescence (PL) spectra. The surface binding of chitosan with different molecular weight (MW) quenched the luminescence of QDs due to the elimination of radioactive anion vacancy centers. This process fits well with the Perrin model; lower MW chitosan exhibits higher quenching efficiency due to better availability to the surface.

Quantitative Model for the Surface-related Electron Transfer in CdS Quantum Dots

The influence of surface S^2- dangling bonds and surface doped ions（Se^2-, Cu^2＋, and Hg^2＋） on the photoluminescence of Cd^2＋-rich CdS QDs was investigated. A quantitative model was proposed to understand the complex transfer processes of excited electrons in CdS QDs. The transfer of excited electrons from either the conduction band or the Cd^2＋-related trap-state to the surface S^2-related shallow hole trap-state is effective. However, the trap of excited electrons by surface doped ion trap-states from the Cd^2＋-related trap-state is more effective than that from the conduction band. The efficiency of trapping electrons from both the conduction band and the Cd^2＋-related trap-state can be quantitatively understood with the help of the proposed model. The results show that the transfer efficiency of excited electrons is dependent on the location of the energy-level of the relevant surface-related trap-state. The trap of excited electrons by the surface trap-state with energy-level closer to that of the conduction band is more effective, especially for the trap of excited electrons from Cd^2＋-related trap-state.

Interaction of CdTe/CdS quantum dots with antibodies

In the study, we observed the strong adsorption of CdTe/CdS QDs to antibodies and the formation of QDs-antibodies conjugates. Capillary electrophoresis with laser-induced fluorescence detection （CE-LIF）, fluorescence spectrometry and fluorescence correlation spectroscopy （FCS） were used to characterize the QDs conjugates with antibody. We found that the QDs-antibody conjugates possessed high fluorescence, small hydrodynamic radii and good stability in aqueous solution. 2009 Ji Cun Ren. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Enhanced visible-light-driven photocatalytic activities of 0D/1D heterojunction carbon quantum dot modified CdS nanowires

Zero‐dimensional carbon dots(0D C‐dots)and one‐dimensional sulfide cadmium nanowires(1D CdS NWs)were prepared by microwave and solvothermal methods,respectively.A series of heterogeneous photocatalysts that consisted of 1D CdS NWs that were modified with 0D C‐dots(C‐dots/CdS NWs)were synthesized using chemical deposition methods.The mass fraction of C‐dots to CdS NWs in these photocatalysts was varied.The photocatalysts were characterized using X‐ray diffraction,scanning electron microscopy,transmission electron microscopy,X‐ray photoelectron spectroscopy,and ultraviolet‐visible spectroscopy.Their photocatalytic performance for the spitting of water and the degradation of rhodamine B(RhB)under visible light irradiation were investigated.The photocatalytic performance of the C‐dots/CdS NWs was enhanced when compared with that of the pure CdS NWs,with the 0.4%C‐dots/CdS NWs exhibiting the highest photocatalytic activity for the splitting of water and the degradation of RhB.The enhanced photocatalytic activity was attributed to a higher carrier density because of the heterojunction between the C‐dots and CdS NWs.This heterojunction improved the electronic transmission capacity and promoted efficient separation of photogenerated electrons and holes.

Novel Hybrid SiO2/ZnS Coated CdTe/CdS Quantum Dots and Their Bioapplications

Novel CdTe/CdS quantum dots(QDs)coated with a hybrid of SiO_2 and ZnS were fabricated through a simple two-step approach.The hybrid SiO_2/ZnS coated CdTe/CdS quantum dots was characterized by transmission electron microscopy(TEM),UV and fluorescence spectrometer.Results indicated that the core-shell structure gave the QDs outstanding photoluminescence properties,includinganarrowphotoluminescencespectrum,high photoluminescence(PL)quantum yield and long emission lifetime(average PL lifetime of increased from 26.4 ns to 49.1 ns).Cellular studies showed the QDs had good cytocompatibility with Hela cells as determined by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide(MTT)assay after coating SiO_2/ZnS,and also proved the feasibility of using the hybrid SiO_2/ZnS coated QDs as optical probes for in vitro cell imaging.The synthesis method of QDs is highly promising for the production of robust and functional optical probes for bio-imaging and sensing applications.

High-quality CdS quantum dots sensitized ZnO nanotube array films for superior photoelectrochemical performance

The surface characteristics of ZnO were synthetically optimized by a self-designed simultaneous etching and W-doping hydrothermal method utilizing as-prepared ZnO nanorod(NR)array films as the template.Benefiting from the etching and regrowth process and the different structural stabilities of the various faces of ZnO NRs,the uniquely etched and W-doped ZnO(EWZ)nanotube(NT)array films with larger surface area,more active sites and better energy band structure were used to improve the photoelectrochemical(PEC)performance and the loading quality of CdS quantum dots(QDs).On the basis of their better surface characteristics,the CdS QDs were uniformly loaded on EWZ NT array film with a good coverage ratio and interface connection;this effectively improved the light-harvesting ability,charge transportation and separation as well as charge injection efficiency during the PEC reaction.Therefore,all the CdS QD-sensitized EWZ NT array films exhibited significantly enhanced PEC performance.The CdS/EWZ-7 composite films exhibited the optimal photocurrent density with a value of 12 mA·cm^(-2),2.5 times higher than that of conventional CdS/ZnO-7 composite films under the same sensitization times with CdS QDs.The corresponding etching and optimizing mechanisms were also discussed.

Anti-Reflection Characteristics of Si Nanowires for Enhanced Photoluminescence from CdTe/CdS Quantum Dots

CdTe/CdS quantum dots（QDs） are fabricated on Si nanowires（NWs） substrates with and without Au nanoparticles（NPs）. The formation of Au NPs on Si NWs can be certified as shown in scanning electron microscopy images. The optical properties of samples are also investigated. It is interesting to find that the photoluminescence（PL） intensity of Cd Te/Cd S QD films on Si nanowire substrates with Au NPs is significantly increased,which can reach 8-fold higher than that of samples on planar Si without Au NPs. The results of finite-difference time-domain simulation indicate that Au NPs induce stronger localization of electric field and then boost the PL intensity of QDs nearby. Furthermore, the time-resolved luminescence decay curve shows the PL lifetime, which is about 5.5 ns at the emission peaks of QD films on planar, increasing from 1.8 ns of QD films on Si NWs to4.7 ns after introducing Au NPs into Si NWs.

PdAg/CDs-ZSM-5催化剂的制备及糠醛水相加氢-重排制环戊酮性能研究

以沸石分子筛(ZSM-5)为载体,碳点(carbon dots,CDs)为还原剂和稳定剂,通过光照还原法制备了双金属PdAg/CDs-ZSM-5催化剂,用于糠醛(furfural,FFA)水相加氢-重排制备环戊酮(cyclopentanone,CPO)反应。采用X射线衍射(XRD)、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、氨气程序升温化学吸附(NH3-TPD)和吡啶红外(Py-FTIR)等手段对催化剂进行了表征。结果表明,CDs具有良好的还原性和丰富的Lewis酸性位点,能够将Pd^(2+)、Ag^(+)还原为金属单质并形成纳米合金结构,复合催化剂中适宜的酸性位点与PdAg合金之间的协同作用使得PdAg/CDs-ZSM-5催化剂在最优反应条件下,对FFA转化率达到100%,目标产物CPO选择性为92.6%。催化剂重复使用五次后仍能保持较高的活性与稳定性。

Graphitic Carbon Quantum Dots Modified Nickel Cobalt Sulfide as Cathode Materials for Alkaline Aqueous Batteries

Carbon quantum dots(CQDs)as a new class of emerging materials have gradually drawn researchers’concern in recent years.In this work,the graphitic CQDs are prepared through a scalable approach,achieving a high yield with more than 50%.The obtained CQDs are further used as structure-directing and conductive agents to synthesize novel N,S-CQDs/NiCo2S4 composite cathode materials,manifesting the enhanced electrochemical properties resulted from the synergistic effect of highly conductive N,S-codoped CQDs offering fast electronic transport and unique micro-/nanostructured NiCo2S4 microspheres with Faradaic redox characteristic contributing large capacity.Moreover,the nitrogen-doped reduced graphene oxide(N-rGO)/Fe2O3 composite anode materials exhibit ultrahigh specific capacity as well as significantly improved rate property and cycle performance originating from the high-capacity prism-like Fe2O3 hexahedrons tightly wrapped by highly conductive N-rGO.A novel alkaline aqueous battery assembled by these materials displays a specific energy(50.2 Wh kg^−1),ultrahigh specific power(9.7 kW kg^−1)and excellent cycling performance with 91.5%of capacity retention at 3 A g^−1 for 5000 cycles.The present research offers a valuable guidance for the exploitation of advanced energy storage devices by the rational design and selection of battery/capacitive composite materials.

Carbon quantum dots for advanced electrocatalysis

Zero-dimensional(0D)carbon quantum dots(CQDs),as a nanocarbon material in the carbon family,have garnered increasing attention in recent years due to their outstanding features of low cost,nontoxicity,large surface area,high electrical conductivity,and rich surface functional groups.By virtue of their rapid electron transfer and large surface area,CQDs also emerge as promising functional materials for the applications in energy-conversion sectors through electrocatalysis.Besides,the rich functional groups on the surface of CQDs offer abundant anchoring sites and active sites for the engineering of multicomponent and high-performance composite materials.More importantly,the heteroatom in the CQDs could effectively tailor the charge distribution to promote the electron transfer via internal interactions,which is crucial to the enhancement of electrocatalytic performance.Herein,an overview about recent progress in preparing CQDs-based composites and employing them as promising electrode materials to promote the catalytic activity and stability for electrocatalysis is provided.The introduced CQDs could enhance the conductivity,modify the morphology and crystal phase,optimize the electronic structure,and provide more active centers and defect sites of composites.After establishing a deep understanding of the relationship between CQDs and electrocatalytic performances,the issues and challenges for the development of CQDs-based composites are discussed.