A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and aci...A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and acid treatment revealed that the outer layer of the fiber is composed of nano-polycrystalline diamond.EDS,XPS,XRD and Raman spectrum analysis further identified that the fiber is composed of MWCNTs in the inner part and nano-polycrystalline diamond in the out layer.It is proposed that the untransformed MWCNTs may act as a template for the regrown outer layer of nano diamond fiber under high pressure and high temperature.展开更多
Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The oxidation properties of felt base carbon/carbon composite...Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The oxidation properties of felt base carbon/carbon composites were investigated at different temperatures (773-1173K), and the microstructures of carbon/carbon composites were studied by SEM and X-ray diffraction. The experimental results showed that the inter-laminar distance of (002) plane (d002) deceased while the microcrystalline stack height (Lc) increased. The oxidation rate of felt base carbon/carbon composites was invari-able at certain temperatures. The oxidation mechanism of carbon/carbon composites changed remarkably at the oxidation temperature 973K. At the initial oxidation stage of carbon/carbon composites, carbon matrix was oxidized much more rapidly than carbon felt.展开更多
Using three kinds of graphites with different graphitization degrees as carbon source and Fe-Ni alloy powder as catalyst, the synthesis of diamond crystals is performed in a cubic anvil high-pressure and high-temperat...Using three kinds of graphites with different graphitization degrees as carbon source and Fe-Ni alloy powder as catalyst, the synthesis of diamond crystals is performed in a cubic anvil high-pressure and high-temperature apparatus （SPD-6 × 1200）. Diamond crystals with perfect hexoctahedron shape are successfully synthesized at pressure from 5.0 to 5.5GPa and at temperature from 1570 to 1770K. The synthetic conditions, nucleation, morphology, inclusion and granularity of diamond crystals are studied. The temperature and pressure increase with the increase of the graphitization degree of graphite. The quantity of nucleation and granularity ofdiamonds decreases with the increase of graphitization degree of graphite under the same synthesis conditions. Moreover, according to the results of the M6ssbauer spectrum, the composition of inclusions is mainly Fe3 C and Fe-Ni alloy phases in diamond crystals synthesized with three kinds of graphites.展开更多
A new type of sintered diamond reinforced by diamond MWCNTs composite fibers which were randomly orientated and even distributed in the diamond matrix was synthesized by using 3wt%mullti-walled carbon nanotubes（MWCNT...A new type of sintered diamond reinforced by diamond MWCNTs composite fibers which were randomly orientated and even distributed in the diamond matrix was synthesized by using 3wt%mullti-walled carbon nanotubes（MWCNTs） as starting additive under high pressure of 5.8 GPa at temperature of 1500℃for 1 min.A special polycrystalline diamond structure of direct bonding of both diamond to diamond and diamond to diamond-MWCNTs composite fiber was observed.The testing results show that it possesses not only high hardness（49～52 GPa） and Young’s modulus（878 GPa） but also high bending strength（1320～1540 GPa） and fracture toughness(9.0～9.2 MPa·m<sup>1/2</sup>) as it was theoretically predicted.The high performances of the composite were contributed by the fiber strengthening effect and the special structure which can offer more extensive diamond to diamond bonding.展开更多
A chemical reaction for the preparation of B-C-N compounds by using carbon tetrachloride （CC14）, boron tribromide （BBr3）, lithium nitride （Li3N） and sodium as reactants has been carried out at the temperature of...A chemical reaction for the preparation of B-C-N compounds by using carbon tetrachloride （CC14）, boron tribromide （BBr3）, lithium nitride （Li3N） and sodium as reactants has been carried out at the temperature of 400℃. Measurements of FTIR, XRD, TEM and EELS show that two kinds of compounds have been formed in the prepared sample. One is hollow sphere-like C-N with an amorphous, structure; the other is piece-like polycrystalline B-C-N with the hexagonal structure. Their determined compositions are close to C3N and BC2N, respectively.展开更多
基金Supported by the National Natural Science Foundation of China(No.50342017)by the Natural Science Foundation of Beijing(No.2042019)
文摘A regrown composite fiber was synthesized during the sintering of diamond under high pressure 5.8 GPa and high temperature 1500℃for 1 min,using 3wt%MWCNTs as additive.SEM observation of the fiber after alkali and acid treatment revealed that the outer layer of the fiber is composed of nano-polycrystalline diamond.EDS,XPS,XRD and Raman spectrum analysis further identified that the fiber is composed of MWCNTs in the inner part and nano-polycrystalline diamond in the out layer.It is proposed that the untransformed MWCNTs may act as a template for the regrown outer layer of nano diamond fiber under high pressure and high temperature.
文摘Felt base carbon/carbon composites fabricated by super-high pressure impregnation carbonization process (SPIC) were heat treated at high temperature 2773K. The oxidation properties of felt base carbon/carbon composites were investigated at different temperatures (773-1173K), and the microstructures of carbon/carbon composites were studied by SEM and X-ray diffraction. The experimental results showed that the inter-laminar distance of (002) plane (d002) deceased while the microcrystalline stack height (Lc) increased. The oxidation rate of felt base carbon/carbon composites was invari-able at certain temperatures. The oxidation mechanism of carbon/carbon composites changed remarkably at the oxidation temperature 973K. At the initial oxidation stage of carbon/carbon composites, carbon matrix was oxidized much more rapidly than carbon felt.
基金Supported by the National Natural Science Foundation of China under Grant No 50572032.
文摘Using three kinds of graphites with different graphitization degrees as carbon source and Fe-Ni alloy powder as catalyst, the synthesis of diamond crystals is performed in a cubic anvil high-pressure and high-temperature apparatus （SPD-6 × 1200）. Diamond crystals with perfect hexoctahedron shape are successfully synthesized at pressure from 5.0 to 5.5GPa and at temperature from 1570 to 1770K. The synthetic conditions, nucleation, morphology, inclusion and granularity of diamond crystals are studied. The temperature and pressure increase with the increase of the graphitization degree of graphite. The quantity of nucleation and granularity ofdiamonds decreases with the increase of graphitization degree of graphite under the same synthesis conditions. Moreover, according to the results of the M6ssbauer spectrum, the composition of inclusions is mainly Fe3 C and Fe-Ni alloy phases in diamond crystals synthesized with three kinds of graphites.
基金Supported by the National Natural Science Foundation of China(No.50342017)by the Natural Science Foundation of Beijing(No.2042019)
文摘A new type of sintered diamond reinforced by diamond MWCNTs composite fibers which were randomly orientated and even distributed in the diamond matrix was synthesized by using 3wt%mullti-walled carbon nanotubes（MWCNTs） as starting additive under high pressure of 5.8 GPa at temperature of 1500℃for 1 min.A special polycrystalline diamond structure of direct bonding of both diamond to diamond and diamond to diamond-MWCNTs composite fiber was observed.The testing results show that it possesses not only high hardness（49～52 GPa） and Young’s modulus（878 GPa） but also high bending strength（1320～1540 GPa） and fracture toughness(9.0～9.2 MPa·m<sup>1/2</sup>) as it was theoretically predicted.The high performances of the composite were contributed by the fiber strengthening effect and the special structure which can offer more extensive diamond to diamond bonding.
基金Supported by the National Natural Science Foundation of China under Grant Nos 50225207, 10325417, 50372055, 50472051 and 50532020, and the National Basic Research Programme of China under Grant No 2005CB724400.
文摘A chemical reaction for the preparation of B-C-N compounds by using carbon tetrachloride （CC14）, boron tribromide （BBr3）, lithium nitride （Li3N） and sodium as reactants has been carried out at the temperature of 400℃. Measurements of FTIR, XRD, TEM and EELS show that two kinds of compounds have been formed in the prepared sample. One is hollow sphere-like C-N with an amorphous, structure; the other is piece-like polycrystalline B-C-N with the hexagonal structure. Their determined compositions are close to C3N and BC2N, respectively.
