The use of carbon-based particle electrodes in three-dimensional electrode reactors for wastewater treatment

The use of three-dimensional(3D)electrodes in water treatment is competitive because of their high catalytic efficiency,low energy consumption and promising development.The use of particle electrodes is a key research focus in this technology.They are usually in the form of particles that fill the space between the cathode and anode,and the selection of materials used is important.Carbon-based materials are widely used because of their large specific surface area,good adsorption performance,high chemical stability and low cost.The principles of 3D electrode technology are introduced and recent research on its use for degrading organic pollutants using carbon-based particle electrodes is summarized.The classification of particle electrodes is introduced and the challenges for the future development of carbon-based particle electrodes in wastewater treatment are discussed.

Carbon-based nanomaterials cause toxicity by oxidative stress to the liver and brain in Sprague-Dawley rats

Carbon-based nanomaterials have important research significance in various disciplines,such as composite materials,nanoelectronic devices,biosensors,biological imaging,and drug delivery.Recently,the human and ecological risks associated with carbon-based nanomaterials have received increasing attention.However,the biological safety of carbon based nanomaterials has not been systematically studied.In this study,we used different types of carbon materials,namely,graphene oxide(GO),single-walled carbon nanotubes(SWCNTs),and multiwalled carbon nanotubes(MWCNTs),as models to observe their distribution and oxidative damage in vivo.The results of Histopathological and ultrastructural examinations indicated that the liver and lungs were the main accumulation targets of these nanomaterials.SR-μ-XRF analysis revealed that SWCNTs and MWCNTs might be present in the brain.This shows that the three types of carbon-based nanomaterials could cross the gas-blood barrier and eventually reach the liver tissue.In addition,SWCNTs and MWCNTs could cross the blood-brain barrier and accumulate in the cerebral cortex.The increase in ROS and MDA levels and the decrease in GSH,SOD,and CAT levels indicated that the three types of nanomaterials might cause oxidative stress in the liver.This suggests that direct instillation of these carbon-based nanomaterials into rats could induce ROS generation.In addition,iron(Fe)contaminants in these nanomaterials were a definite source of free radicals.However,these nanomaterials did not cause obvious damage to the rat brain tissue.The deposition of selenoprotein in the rat brain was found to be related to oxidative stress and Fe deficiency.This information may support the development of secure and reasonable applications of the studied carbon-based nanomaterials.

Improvement in Performance of Carbon-based Perovskite Solar Cells through Interface Modification with CTAC

Carbon-based perovskite solar cells have attracted much attention,due to their low cost,simple preparation process and high chemical stability.However,the devices exhibit low photoelectric conversion efficiency,owing to the presence of defects and interface impedance between the perovskite active layer and the contact interface.In order to minimize the interfacial defects and improve the charge transfer performance between the perovskite layer and the contact interface,cetyltrimethylammonium chloride(CTAC)was introduced into the lower interface of HTL-free carbon-based perovskite solar cells,because CTAC can be used as interface modification material to passivate the buried interface of perovskite and promote grain growth.It was found that CTAC can not only passivate the interface defects of perovskite,but also improve the crystalline quality of perovskite.As a result,the photovoltaic conversion efficiency of reaches 17.18%,which is 12.5%higher than that of the control group.After 20 days in air with 60%RH humidity,the cell can still maintain more than 90%of the initial efficiency,which provides a new strategy for interfacial passivation of perovskite solar cells.

Enhancement of mid-wavelength infrared absorbance by alkane-grafted Ti3C2Tx MXene thin-films

An enhancement of mid-wavelength infrared absorbance is achieved via a cost-effectively chemical method to bend the flakes by grafting two types of alkane octane(C_(8)H_(18))and dodecane(C_(12)H_(26))onto the surface terminals respectively.The chain-length of alkane exceeds the bond-length of surface functionalities T(x=O,-OH,-F)so as to introduce intra-flake and inter-flake strains into Ti_(3)C_(2)T_(x)MXene.The electronic microscopy(TEM/AFM)shows obvious edge-fold and tensile/compressive deformation of flake.The alkane termination increases the intrinsic absorbance of Ti_(3)C_(2)T_(x)MXene from no more than 50%up to more than 99%in the mid-wavelength in⁃frared region from 2.5μm to 4.5μm.Such an absorption enhancement attributes to the reduce of infrared reflec⁃tance of Ti_(3)C_(2)T_(x)MXene.The C-H bond skeleton vibration covers the aforementioned region and partially reduces the surface reflectance.Meanwhile,the flake deformation owing to edge-fold and tensile/compression increases the specific surface area so as to increase the absorption as well.These results have applicable value in the area of mid-infrared camouflage.

Numerical Analysis on the Effect of n-Si on Cu(In, Ga)Se2 Based Thin-Films for High-Performance Solar Cells by 1D-SCAPS

We report the performances of a chalcopyrite Cu(In, Ga)Se2 CIGS-based thin-film solar cell with a newly employed high conductive n-Si layer. The data analysis was performed with the help of the 1D-Solar Cell Capacitance Simulator (1D-SCAPS) software program. The new device structure is based on the CIGS layer as the absorber layer, n-Si as the high conductive layer, i-In2S3, and i-ZnO as the buffer and window layers, respectively. The optimum CIGS bandgap was determined first and used to simulate and analyze the cell performance throughout the experiment. This analysis revealed that the absorber layer’s optimum bandgap value has to be 1.4 eV to achieve maximum efficiency of 22.57%. Subsequently, output solar cell parameters were analyzed as a function of CIGS layer thickness, defect density, and the operating temperature with an optimized n-Si layer. The newly modeled device has a p-CIGS/n-Si/In2S3/Al-ZnO structure. The main objective was to improve the overall cell performance while optimizing the thickness of absorber layers, defect density, bandgap, and operating temperature with the newly employed optimized n-Si layer. The increase of absorber layer thickness from 0.2 - 2 µm showed an upward trend in the cell’s performance, while the increase of defect density and operating temperature showed a downward trend in solar cell performance. This study illustrates that the proposed cell structure shows higher cell performances and can be fabricated on the lab-scale and industrial levels.

Carbon-based derivatives from metal-organic frameworks as cathode hosts for Li–S batteries

Lithium-sulfur batteries(Li–S batteries) are promising candidates for the next generation high-energy rechargeable Li batteries due to their high theoretical specific capacity(1672 m Ahg-1) and energy density(2500 Wh kg-1). The commercialization of Li–S batteries is impeded by several key challenges at cathode side, e.g. the insulating nature of sulfur and discharged products(Li2S 2 and Li2S), the solubility of long-chain polysulfides and volume variation of sulfur cathode upon cycling. Recently, the carbonbased derivatives from metal-organic frameworks(MOFs) has emerged talent in their utilization as cathode hosts for Li–S batteries. They are not only highly conductive and porous to enable the acceleration of Li +/e-transfer and accommodation of volumetric expansion of sulfur cathode during cycling, but also enriched by controllable chemical active sites to enable the adsorption of polysulfides and promotion of their conversion reaction kinetics. In this review, based on the types of MOFs(e.g. ZIF-8, ZIF-67, Prussian blue, Al-MOF, MOF-5, Cu-MOF, Ni-MOF), the synthetic methods, formation process and morphology, structural superiority of MOFs-derived carbon frameworks along with their electrochemical performance as cathode host in Li–S batteries are summarized and discussed.

Carbon-Based MOF Derivatives:Emerging Efficient Electromagnetic Wave Absorption Agents

To tackle the aggravating electromagnetic wave(EMW)pollution issues,high-efficiency EMW absorption materials are urgently explored.Metal-organic framework(MOF)derivatives have been intensively investigated for EMW absorption due to the distinctive components and structures,which is expected to satisfy diverse application requirements.The extensive developments on MOF derivatives demonstrate its significantly important role in this research area.Particularly,MOF derivatives deliver huge performance superiorities in light weight,broad bandwidth,and robust loss capacity,which are attributed to the outstanding impedance matching,multiple attenuation mechanisms,and destructive interference effect.Herein,we summarized the relevant theories and evaluation methods,and categorized the state-of-the-art research progresses on MOF derivatives in EMW absorption field.In spite of lots of challenges to face,MOF derivatives have illuminated infinite potentials for further development as EMW absorption materials.

Multifunctional roles of carbon-based hosts for Li-metal anodes:A review

With its high theoretical capacity,lithium(Li)metal is recognized as the most potential anode for realizing a high-performance energy storage system.A series of questions(severe safety hazard,low Coulombic efficiency,short lifetime,etc.)induced by uncontrollable dendrites growth,unstable solid electrolyte interface layer,and large volume change,make practical application of Li-metal anodes still a threshold.Due to their highly appealing properties,carbon-based materials as hosts to composite with Li metal have been passionately investigated for improving the performance of Li-metal batteries.This review displays an overview of the critical role of carbon-based hosts for improving the comprehensive performance of Li-metal anodes.Based on correlated mainstream models,the main failure mechanism of Li-metal anodes is introduced.The advantages and strategies of carbon-based hosts to address the corresponding challenges are generalized.The unique function,existing limitation,and recent research progress of key carbon-based host materials for Li-metal anodes are reviewed.Finally,a conclusion and an outlook for future research of carbon-based hosts are presented.This review is dedicated to summarizing the advances of carbon-based materials hosts in recent years and providing a reference for the further development of carbonbased hosts for advanced Li-metal anodes.

Reaction Kinetics of Biodiesel Synthesis from Waste Oil Using a Carbon-based Solid Acid Catalyst

The kinetics of simultaneous transesterification and esterification with a carbon-based solid acid catalyst was studied.Two solid acid catalysts were prepared by the sulfonation of carbonized vegetable oil asphalt and petroleum asphalt.These catalysts were characterized on the basis of elemental analysis,acidity site concentration,the Brunauer-Emmett-Teller（BET）surface area and pore size.The kinetic parameters with the two catalysts were determined,and the reaction system can be described as a pseudo homogeneous catalyzed reaction.All the forward and reverse reactions follow second order kinetics.The calculated concentration values from the kinetic equations are in good agreement with experimental values.

Structure and denitration performance of carbon-based catalysts prepared from Cu-BTC precursor

Using Cu-BTC prepared by hydrothermal method as precursor, carbon-based catalysts were obtained as model materials for low-temperature DeNO_x. These catalysts were characterized by X-ray diffractometry（XRD）, Raman spectroscopy, scanning electron microscopy（SEM） and energy dispersive X-ray spectrometry（EDS）. The results showed that all carbon-based catalysts held the octahedron shape of Cu-BTC in most parts, and they mainly consisted of face-centered cubic copper. CuO_x/C exhibited excellent catalytic activity, and such catalytic activity was further improved with the introduction of Ag. The catalyst with a Cu to Ag mole ratio of 6：1 and an activated temperature of 600 °C showed the best catalytic performance, and its catalytic denitration rate reached 100% at a temperature as low as 235 °C. During the catalytic reaction process, Cu~＋ mainly played a catalytic role.

Carbon-Based Flexible and All-Solid-State Micro-supercapacitors Fabricated by Inkjet Printing with Enhanced Performance

By means of inkjet printing technique, flexible and all-solid-state micro-supercapacitors(MSCs) were fabricated with carbon-based hybrid ink composed of graphene oxide(GO,98.0vol.%) ink and commercial pen ink(2.0vol.%). A small amount of commercial pen ink was added to effectively reduce the agglomeration of theGO sheets during solvent evaporation and the following reduction processes in which the presence of graphite carbon nanoparticles served as nano-spacer to separate GO sheets. The printed device fabricated using the hybrid ink,combined with the binder-free microelectrodes and interdigital microelectrode configuration, exhibits nearly 780%enhancement in areal capacitance compared with that of pure GO ink. It also shows excellent flexibility and cycling stability with nearly 100% retention of the areal capacitance after 10,000 cycles. The all-solid-state device can be optionally connected in series or in parallel to meet the voltage and capacity requirements for a given application.This work demonstrates a promising future of the carbonbased hybrid ink for directly large-scale inkjet printing MSCs for disposable energy storage devices.

Wet carbon-based solid acid/NaNO_3 as a mild and efficient reagent for nitration of aromatic compound under solvent free conditions

Nitro aromatic compound can be obtained in high yields via nitration of aromatic compound with wet carbon-based solid acid and NaNO_3 under solvent free oxidation at room temperature.

Composition Optimization and Microstructure Design in MOFs-Derived Magnetic Carbon-Based Microwave Absorbers:A Review

Magnetic carbon-based composites are the most attractive candidates for electromagnetic(EM)absorption because they can terminate the propagation of surplus EM waves in space by interacting with both electric and magnetic branches.Metal-organic frameworks(MOFs)have demonstrated their great potential as sacrificing precursors of magnetic metals/carbon composites,because they provide a good platform to achieve high dispersion of magnetic nanoparticles in carbon matrix.Nevertheless,the chemical composition and microstructure of these composites are always highly dependent on their precursors and cannot promise an optimal EM state favorable for EM absorption,which more or less discount the superiority of MOFs-derived strategy.It is hence of great importance to develop some accompanied methods that can regulate EM properties of MOFs-derived magnetic carbon-based composites e ectively.This review comprehensively introduces recent advancements on EM absorption enhancement in MOFs-derived magnetic carbon-based composites and some available strategies therein.In addition,some challenges and prospects are also proposed to indicate the pending issues on performance breakthrough and mechanism exploration in the related field.

Determination of Ni^(2+) in Waters with Sodium Polyacrylate as a Binding Phase in Diffusive Gradients in Thin-films

An aqueous solution containing sodium polyacrylate（PAAS） was used in diffusive gradient in thin-films technique（DGT） to measure DGT-labile Ni2＋ concentrations.The DGT devices（PAAS DGT） were validated in four types of solutions,including synthetic river water containing metal ions with complexing EDTA or that without complexing EDTA,natural river water（Ling River,Jinzhou,China） spiked with Ni2＋,and an industrial wastewater （Jinzhou,China）.Results show that only free metal ions were measured by PAAS DGT,recovery=97.36% in the solutions containing only free metal ions,recovery=49.62% in a solution with metal/EDTA molar ratio of 2：1 and recovery=0 in the solutions with metal/EDTA molar ratios of 1：1 and 1：2.These indicated that the complexes of Ni-EDTA were DGT-inert.The DGT performance in spiked river water（recovery=18.24%） and in industrial wastewater（recovery=12.25%） were investigated,which indicated that the measurement of metals by this DGT device did not include the humic substances complexed fractions of metals.The binding properties of PAAS DGT for Ni2＋ were investigated under different conditions of pH value and ionic strength.Conditional stability constants（lgK） of PAAS-Ni complexes were also evaluated.

Wet carbon-based solid acid/potassium permanganate as an efficient heterogeneous reagents for oxidation of alcohols under mild conditions

Wet carbon-based solid acid and potassium permanganate were used as new reagents for oxidation of alcohols to their corresponding aldehydes and ketones in heterogeneous mixtures. The experiments were done moderately at mild condition and high yields in suitable times were obtained.

Photo-rechargeable batteries and supercapacitors:Critical roles of carbon-based functional materials

As a clean and renewable energy source,solar energy is a competitive alternative to replace conventional fossil fuels.Nevertheless,its serious fluctuating nature usually leads to a poor alignment with the actual energy demand.To solve this problem,the direct solar-to-electrochemical energy conversion and storage have been regarded as a feasible strategy.In this context,the development of high-performance integrated devices based on solar energy conversion parts(i.e.,solar cells or photoelectrodes)and electrochemical energy storage units(i.e.,rechargeable batteries or supercapacitors[SCs])has become increasingly necessary and urgent,in which carbon and carbon-based functional materials play a fundamental role in determining their energy conversion/storage performances.Herein,we summarize the latest progress on these integrated devices for solar electricity energy conversion and storage,with special emphasis on the critical role of carbon-based functional materials.First,principles of integrated devices are introduced,especially roles of carbon-based materials in these hybrid energy devices.Then,two major types of important integrated devices,including photovoltaic and photoelectrochemicalrechargeable batteries or SCs,are discussed in detail.Finally,key challenges and opportunities in the future development are also discussed.By this review,we hope to pave an avenue toward the development of stable and efficient devices for solar energy conversion and storage.

Two-dimensional equations for thin-films of ionic conductors

A theoretical model is developed for predicting both conduction and diffusion in thin-film ionic conductors or cables. With the linearized Poisson-Nernst-Planck(PNP)theory, the two-dimensional(2D) equations for thin ionic conductor films are obtained from the three-dimensional(3D) equations by power series expansions in the film thickness coordinate, retaining the lower-order equations. The thin-film equations for ionic conductors are combined with similar equations for one thin dielectric film to derive the 2D equations of thin sandwich films composed of a dielectric layer and two ionic conductor layers. A sandwich film in the literature, as an ionic cable, is analyzed as an example of the equations obtained in this paper. The numerical results show the effect of diffusion in addition to the conduction treated in the literature. The obtained theoretical model including both conduction and diffusion phenomena can be used to investigate the performance of ionic-conductor devices with any frequency.

Indispensable gutter layers in thin-film composite membranes for carbon capture

Industrial thin-film composite(TFC)membranes achieve superior gas separation properties from high-performance selective layer materials,while the success of membrane technology relies on high-performance gutter layers to achieve production scalability and low-cost manufacturing.However,the current literature predominantly focuses on the design of polymer architectures to obtain high permeability and selectivity,while the art of fabricating gutter layers is usually safeguarded by industrial manufacturers and appears lackluster to academic researchers.This is the first report aiming to provide a comprehensive and critical review of state-of-the-art gutter layer materials and their design and modification to enable TFC membranes with superior separation performance.We first elucidate the importance of the gutter layer on membrane performance through modeling and experimental results.Then various gutter layer materials used to obtain high-performance composite membranes are critically reviewed,and the strategies to improve their compatibility with the selective layer are highlighted,such as oxygen plasma treatment,polydopamine deposition,and surface grafting.Finally,we present the opportunities of the gutter layer design for practical applications.

Recent Advances in Carbon-Based Current Col lectors/Hosts for Alkali Metal Anodes

The urgent demand for high-energy-density storage systems evokes the research upsurge on the alkali metal batteries with high theoretical capacities.However,the utilization of alkali metal anodes,including Li,Na,and K,is significantly hindered by notorious dendrite growth,undesirable corrosion,and unstable solid electrolyte interface.In order to resolve these issues,the carbon materials for the rational design of current collector/host that can regulate the plating/stripping behavior of alkali metal have been exploited.These carbon-based current collectors/hosts are featured with many pivotal advantages,including mechanical integrity to accommodate the volume change,superior electronic/ionic conductivity,large available surface area,and rich functionalization chemistries to increase the affinity to alkali metal.In this review,the recent progress on various dimensional carbon-based current collectors/hosts with different chemical components in stabilizing the alkali metal anodes through the regulation of initial deposition and subsequent growth behavior during plating/stripping process is provided.The nanostructured carbon scaffolds with self-affinity to alkali metals,as well as the carbon frameworks with internal/external affinitive sites to alkali metals,catalogued by various dimensions,are discussed in this review.Therefore,these appealing strategies based on the carbon-based current collectors/hosts can provide a paradigm for the realization of high-energy-density alkali metal batteries.

Long-Chain Gemini Surfactant-Assisted Blade Coating Enables Large-Area Carbon-Based Perovskite Solar Modules with Record Performance

Carbon-based perovskite solar cells show great potential owing to their low-cost production and superior stability in ambient air.However,scaling up to high-efficiency carbon-based solar modules hinges on reliable deposition of uniform defect-free perovskite films over large areas,which is an unsettled but urgent issue.In this work,a long-chain gemini surfactant is introduced into perovskite precursor ink to enforce self-assembly into a network structure,considerably enhancing the coverage and smoothness of the perovskite films.The long gemini surfactant plays a distinctively synergistic role in perovskite film construction,crystallization kinetics modulation and defect passivation,leading to a certified record power conversion efficiency of 15.46%with Voc of 1.13 V and Jsc of 22.92 mA cm^(-2)for this type of modules.Importantly,all of the functional layers of the module are printed through a simple and high-speed(300 cm min^(-1))blade coating strategy in ambient atmosphere.These results mark a significant step toward the commercialization of all-printable carbon-based perovskite solar modules.