In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its r...In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.展开更多
We developed a mathematical optimization model coupling chemical compositions and high-temperature characteristics of sintering materials, targeting the best quality and lowest cost. The simplex algorithm was adopted ...We developed a mathematical optimization model coupling chemical compositions and high-temperature characteristics of sintering materials, targeting the best quality and lowest cost. The simplex algorithm was adopted to solve this model. Four kinds of imported iron ores, two kinds of Chinese iron ore concentrates, and two kinds of fluxes were selected to verify both the model and the algorithm. The results confirmed the possibility of considering both chemical compositions and high-temperature characteristics of iron ores in the optimization model. This model provides a technical roadmap to obtain a precise mathematical correlation between the lowest cost and the grade of iron in sinters based on the condition of given raw materials, which can provide a reference to adjust the grade of iron in the sintering process for enterprise.展开更多
In this editorial we comment on the article titled“Inflammatory bowel diseases patients suffer from significant low levels and barriers to physical activity:The BE-FIT-IBD study”published in a recent issue of the Wo...In this editorial we comment on the article titled“Inflammatory bowel diseases patients suffer from significant low levels and barriers to physical activity:The BE-FIT-IBD study”published in a recent issue of the World Journal of Gastroen-terology 2023;29(41):5668-5682.Inflammatory bowel diseases(IBD)are emerging as a significant global health concern as their incidence continues to rise on a global scale,with detrimental impacts on quality of life.While many advances have been made regarding the management of the disease,physical inactivity in these patients represents an underexplored issue that may hold the key for further and better understanding the ramifications of IBD.Chronic pain,fatigue,and fear of exacerbating symptoms promotes physical inactivity among IBD patients,while the lack of clear guidelines on safe exercise regimens contributes to a norm of physical inactivity.Physical activity(PA)is accepted to have a positive effect on disease outcomes and quality of life,while inactivity exacerbates comorbidities like cardiovascular disease and mental health disorders.The“BE-FIT-IBD”study,focusing on PA levels and barriers in IBD patients of Southern Italy,revealed that a significant proportion(42.9%)were physically inactive.This lack of PA is attributed to barriers such as fear of flare-ups and misconceptions about exercise exacerbating the disease.The study also highlighted the need for better communication between healthcare providers and patients regarding the benefits of PA and safe incorporation into lifestyles.Moreover,physical inactivity may also contribute to disability in IBD patients,having a great impact on employment status.Of note is the fact that IBD also comes with an important psychological burden with relevant evidence suggesting that regular PA can improve mood,reduce anxiety,and enhance mental health.The“BE-FIT-IBD”study advocated for the integration of PA into IBD management,emphasizing the bidirectional link between PA and IBD.Regular exercise can influence the course of IBD,potentially reducing symptom severity and prolonging remission periods.As such,it is mandatory that healthcare providers actively educate patients,dispel misconceptions,and tailor exercise recommendations to improve the quality of life and reduce IBD-related complications.展开更多
Effect of distribution of iron concentrates between pelletized and matrix feed on the preparation of blast furnace burdens from two different kinds of fine iron concentrates (magnetite and hematite) by composite agglo...Effect of distribution of iron concentrates between pelletized and matrix feed on the preparation of blast furnace burdens from two different kinds of fine iron concentrates (magnetite and hematite) by composite agglomeration process (CAP) was explored. It was found that when the mass ratio of iron concentrate A (magnetite) to iron concentrate B (hematite) in the mixed feed was constant, the proportion of iron concentrate A in the pelletized and matrix feed significantly affected the quality of CAP products. Particularly, as the proportion of iron concentrate A in the pelletized feed increased from 0 to 100%, the yield decreased from 82.11% to 79.19% and the tumbler index decreased from 71.33% to 68.27%. The mineralization characterization results indicated that when 100% iron concentrate A was used as the pelletized feed, the crystallization styles of the outer layer and the inner layer of the pellet were different, and a lot of pores exist around hematite and magnetite phases in the pelletized part, with the weak connection of pelletized and matrix part, resulting in poor strength of agglomeration product.展开更多
基金Project(2019JJ51007)supported by the Natural Science Foundation of Hunan Province,China。
文摘In order to reduce the materials cost of COREX ironmaking process,sinter has been introduced into the composite burden in China.This work explored the reducing process of sinter in COREX shaft furnace to clarify its reduction properties change and then the effect of sinter proportion on metallurgical performance of composite burden was investigated.The results show that the reducing process of sinter in COREX shaft furnace was basically same with that in blast furnace but sinter seems like breaking faster.Under reducing condition simulated COREX shaft furnace,sinter possessed the worst reduction degradation index(RDI)and undifferentiated reduction index(RI)compared with pellet and iron ore lumps.Macroscopic and microscopic mineralogy changes indicated that sinter presents integral cracking while pellet and lump ore present surface cracking,and no simple congruent relationship exists between cracks of the burden and its ultimate reduction degradation performance.The existence of partial metallurgical performance superposition between composite and single ferrous burden was confirmed.RDI_(+6.3)≥70%and RDI_(+3.15)≥80%were speculated as essential requirements for the composite burden containing sinter in COREX shaft furnace.
基金financially supported by the National Natural Science Foundation of China and Baosteel Group Co., Ltd., of Shanghai (U1260202)the Postdoctoral Science Foundation of China (2012T50045)
文摘We developed a mathematical optimization model coupling chemical compositions and high-temperature characteristics of sintering materials, targeting the best quality and lowest cost. The simplex algorithm was adopted to solve this model. Four kinds of imported iron ores, two kinds of Chinese iron ore concentrates, and two kinds of fluxes were selected to verify both the model and the algorithm. The results confirmed the possibility of considering both chemical compositions and high-temperature characteristics of iron ores in the optimization model. This model provides a technical roadmap to obtain a precise mathematical correlation between the lowest cost and the grade of iron in sinters based on the condition of given raw materials, which can provide a reference to adjust the grade of iron in the sintering process for enterprise.
文摘In this editorial we comment on the article titled“Inflammatory bowel diseases patients suffer from significant low levels and barriers to physical activity:The BE-FIT-IBD study”published in a recent issue of the World Journal of Gastroen-terology 2023;29(41):5668-5682.Inflammatory bowel diseases(IBD)are emerging as a significant global health concern as their incidence continues to rise on a global scale,with detrimental impacts on quality of life.While many advances have been made regarding the management of the disease,physical inactivity in these patients represents an underexplored issue that may hold the key for further and better understanding the ramifications of IBD.Chronic pain,fatigue,and fear of exacerbating symptoms promotes physical inactivity among IBD patients,while the lack of clear guidelines on safe exercise regimens contributes to a norm of physical inactivity.Physical activity(PA)is accepted to have a positive effect on disease outcomes and quality of life,while inactivity exacerbates comorbidities like cardiovascular disease and mental health disorders.The“BE-FIT-IBD”study,focusing on PA levels and barriers in IBD patients of Southern Italy,revealed that a significant proportion(42.9%)were physically inactive.This lack of PA is attributed to barriers such as fear of flare-ups and misconceptions about exercise exacerbating the disease.The study also highlighted the need for better communication between healthcare providers and patients regarding the benefits of PA and safe incorporation into lifestyles.Moreover,physical inactivity may also contribute to disability in IBD patients,having a great impact on employment status.Of note is the fact that IBD also comes with an important psychological burden with relevant evidence suggesting that regular PA can improve mood,reduce anxiety,and enhance mental health.The“BE-FIT-IBD”study advocated for the integration of PA into IBD management,emphasizing the bidirectional link between PA and IBD.Regular exercise can influence the course of IBD,potentially reducing symptom severity and prolonging remission periods.As such,it is mandatory that healthcare providers actively educate patients,dispel misconceptions,and tailor exercise recommendations to improve the quality of life and reduce IBD-related complications.
基金supported by the National Natural Science Foundation of China under Grant U1960114,51774337,and U1660206the Open Sharing Fund for the Large-scale Instruments and Equipments of Central South University under Grant CSUZC201905the Fundamental Research Funds for the Central Universities of Central South University under Grant 2018zzts220.
文摘Effect of distribution of iron concentrates between pelletized and matrix feed on the preparation of blast furnace burdens from two different kinds of fine iron concentrates (magnetite and hematite) by composite agglomeration process (CAP) was explored. It was found that when the mass ratio of iron concentrate A (magnetite) to iron concentrate B (hematite) in the mixed feed was constant, the proportion of iron concentrate A in the pelletized and matrix feed significantly affected the quality of CAP products. Particularly, as the proportion of iron concentrate A in the pelletized feed increased from 0 to 100%, the yield decreased from 82.11% to 79.19% and the tumbler index decreased from 71.33% to 68.27%. The mineralization characterization results indicated that when 100% iron concentrate A was used as the pelletized feed, the crystallization styles of the outer layer and the inner layer of the pellet were different, and a lot of pores exist around hematite and magnetite phases in the pelletized part, with the weak connection of pelletized and matrix part, resulting in poor strength of agglomeration product.
