Characteristics of carbon isotopic composition of alkane gas in large gas fields in China

Exploration and development of large gas fields is an important way for a country to rapidly develop its natural gas industry.From 1991 to 2020,China discovered 68 new large gas fields,boosting its annual gas output to 1925×108m3in 2020,making it the fourth largest gas-producing country in the world.Based on 1696 molecular components and carbon isotopic composition data of alkane gas in 70 large gas fields in China,the characteristics of carbon isotopic composition of alkane gas in large gas fields in China were obtained.The lightest and average values ofδ^(13)C_(1),δ13C2,δ13C3andδ13C4become heavier with increasing carbon number,while the heaviest values ofδ^(13)C_(1),δ13C2,δ13C3andδ13C4become lighter with increasing carbon number.Theδ^(13)C_(1)values of large gas fields in China range from-71.2‰to-11.4‰(specifically,from-71.2‰to-56.4‰for bacterial gas,from-54.4‰to-21.6‰for oil-related gas,from-49.3‰to-18.9‰for coal-derived gas,and from-35.6‰to-11.4‰for abiogenic gas).Based on these data,theδ^(13)C_(1)chart of large gas fields in China was plotted.Moreover,theδ^(13)C_(1)values of natural gas in China range from-107.1‰to-8.9‰,specifically,from-1071%o to-55.1‰for bacterial gas,from-54.4‰to-21.6‰for oil-related gas,from-49.3‰to-13.3‰for coal-derived gas,and from-36.2‰to-8.9‰for abiogenic gas.Based on these data,theδ^(13)C_(1)chart of natural gas in China was plotted.

Carbon and Oxygen Isotopic Composition of Surface-Sediment Carbonate in Bosten Lake (Xinjiang,China) and its Controlling Factors

Bosten Lake is a mid-latitude lake with water mainly supplied by melting ice and snow in the Tianshan Mountains. The depositional environment of the lake is spatially not uniform due to the proximity of the major inlet and the single outlet in the western part of the lake. The analytical results show that the carbon and oxygen isotopic composition of recent lake sediments is related to this specific lacustrine depositional environment and to the resulting carbonate mineralogy. In the southwestern lake region between the Kaidu River inlet and the Kongqi River outlet, carbon isotope composition （δ^13C） values of the carbonate sediment （-1‰ to -2‰） have no relation to the oxygen isotope composition of the carbonate （δ^18O） values （-7‰ to -8‰）, with both isotopes showing a low variability. The carbonate content is low （〈20%）. Carbonate minerals analyzed by X-ray diffraction are mainly composed of calcite, while aragonite was not recorded. The salinity of the lake water is low in the estuary region as a result of the Kaidu River inflow. In comparison, the carbon and oxygen isotope values are higher in the middle and eastern parts of the lake, with δ^13C values between approximately ＋0.5‰ and ＋3‰, and δ^18O values between -1‰ and -5‰. There is a moderate correlation between the stable oxygen and carbon isotopes, with a coefficient of correlation r of approximately 0.63. This implies that the lake water has a relatively short residence time. Carbonate minerals constitute calcite and aragonite in the middle and eastern region of the lake. Aragonite and Mg-calcite are formed at higher lake water salinity and temperatures, and larger evaporation effects. More saline lake water in the middle and eastern region of the lake and the enhanced isotopic equilibrium between water and atmospheric CO2 cause the correlating carbon and oxygen isotope values determined for aragonite and Mg-calcite. Evaporation and biological processes are the main reasons for the salinity and carbonate mineralogy influence of the surface-sediment carbonate in Bosten Lake. The lake water residence time and the CO2 exchange between the atmosphere and the water body control the carbon and oxygen isotope composition of the carbonate sediment. In addition, organic matter pollution and decomposition result in the abnormally low carbon isotope values of the lake surface-sediment carbonate.

Laser‑Induced and MOF‑Derived Metal Oxide/Carbon Composite for Synergistically Improved Ethanol Sensing at Room temperature

Advancements in sensor technology have significantly enhanced atmospheric monitoring.Notably,metal oxide and carbon(MO_(x)/C)hybrids have gained attention for their exceptional sensitivity and room-temperature sensing performance.However,previous methods of synthesizing MO_(x)/C composites suffer from problems,including inhomogeneity,aggregation,and challenges in micropatterning.Herein,we introduce a refined method that employs a metal–organic framework(MOF)as a precursor combined with direct laser writing.The inherent structure of MOFs ensures a uniform distribution of metal ions and organic linkers,yielding homogeneous MO_(x)/C structures.The laser processing facilitates precise micropatterning(<2μm,comparable to typical photolithography)of the MO_(x)/C crystals.The optimized MOF-derived MO_(x)/C sensor rapidly detected ethanol gas even at room temperature(105 and 18 s for response and recovery,respectively),with a broad range of sensing performance from 170 to 3,400 ppm and a high response value of up to 3,500%.Additionally,this sensor exhibited enhanced stability and thermal resilience compared to previous MOF-based counterparts.This research opens up promising avenues for practical applications in MOF-derived sensing devices.

Electrostatic Interaction-directed Construction of Hierarchical Nanostructured Carbon Composite with Dual Electrical Conductive Networks for Zinc-ion Hybrid Capacitors with Ultrastability

Metal-organic framework(MOF)-derived carbon composites have been considered as the promising materials for energy storage.However,the construction of MOF-based composites with highly controllable mode via the liquid-liquid synthesis method has a great challenge because of the simultaneous heterogeneous nucleation on substrates and the self-nucleation of individual MOF nanocrystals in the liquid phase.Herein,we report a bidirectional electrostatic generated self-assembly strategy to achieve the precisely controlled coatings of single-layer nanoscale MOFs on a range of substrates,including carbon nanotubes(CNTs),graphene oxide(GO),MXene,layered double hydroxides(LDHs),MOFs,and SiO_(2).The obtained MOF-based nanostructured carbon composite exhibits the hierarchical porosity(V_(meso)/V_(micro)∶2.4),ultrahigh N content of 12.4 at.%and"dual electrical conductive networks."The assembled aqueous zinc-ion hybrid capacitor(ZIC)with the prepared nanocarbon composite as a cathode shows a high specific capacitance of 236 F g^(-1)at 0.5 A g^(-1),great rate performance of 98 F g^(-1)at 100 A g^(-1),and especially,an ultralong cycling stability up to 230000 cycles with the capacitance retention of 90.1%.This work develops a repeatable and general method for the controlled construction of MOF coatings on various functional substrates and further fabricates carbon composites for ZICs with ultrastability.

Ti_(3)C_(2)T_(x) MXene/carbon composites for advanced supercapacitors:Synthesis,progress,and perspectives

MXenes are a family of two-dimensional(2D)layered transition metal carbides/nitrides that show promising potential for energy storage applications due to their high-specific surface areas,excellent electron conductivity,good hydrophilicity,and tunable terminations.Among various types of MXenes,Ti_(3)C_(2)T_(x) is the most widely studied for use in capacitive energy storage applications,especially in supercapacitors(SCs).However,the stacking and oxidation of MXene sheets inevitably lead to a significant loss of electrochemically active sites.To overcome such challenges,carbon materials are frequently incorporated into MXenes to enhance their electrochemical properties.This review introduces the common strategies used for synthesizing Ti_(3)C_(2)T_(x),followed by a comprehensive overview of recent developments in Ti_(3)C_(2)T_(x)/carbon composites as electrode materials for SCs.Ti_(3)C_(2)T_(x)/carbon composites are categorized based on the dimensions of carbons,including 0D carbon dots,1D carbon nanotubes and fibers,2D graphene,and 3D carbon materials(activated carbon,polymer-derived carbon,etc.).Finally,this review also provides a perspective on developing novel MXenes/carbon composites as electrodes for application in SCs.

Cooperative composites anchored with single atom Pb and carbon confined PbO nanoparticles for superior lead-carbon batteries

The mitigation of sulphation and parasitic hydrogen evolution is considered as prominent research emphasis for the development of lead-carbon batteries(LCBs)in large-scale energy storage applications.Here,cooperative Pb-C composites consisting of single atom Pb and carbon-encapsulated PbO nanoparticles were prepared by freeze-drying technique and pyrolytic reduction to address above obstacles.The innovative use of Pb^(2+)to cross-link sodium alginate enabled a uniform distribution of Pb in the composites,generating Pb-C-PbO three-phase heterostructure.Experimental analysis and theoretical calculations revealed the synergistic interactions between single-atom Pb and PbO nanoparticles in suppressing parasitic hydrogen evolution and promoting the adsorption of Pb atoms.The presence of monatomic Pb and PbO enhanced the affinity of the composites for the negative active materials and facilitated the transformation of the active materials from bulk into spherical shapes to enhance the specific surface area,thereby counteracting sulphation.Through the coordinated integration of various functionalities offered by Pb@C-x,the cycle life of the battery at HRPSoC reaches 7025 cycles,which is two times for LCB with pure carbon materials.Additionally,the discharge capacity increased from 3.52 to 3.79 Ah.This study provides substantial insights into the construction of Pb-C composites for LCBs to inhibit negative sulphation and hydrogen evolution.

Multi-scale design of silicon/carbon composite anode materials for lithium-ion batteries:A review

Silicon/carbon composites,which integrate the high lithium storage performance of silicon with the exceptional mechanical strength and conductivity of carbon,will replace the traditional graphite electrodes for high-energy lithium-ion batteries.Various strategies have been designed to synthesize silicon/carbon composites for tackling the issues of anode pulverization and poor stability in the anodes,thereby improving the lithium storage ability.The effect of the regulation method at each scale on the final negative electrode performance remains unclear.However,it has not been fully clarified how the regulation methods at each scale influence the final anode performance.This review will categorize the materials structure into three scales:molecular scale,nanoscale,and microscale.First,the review will examine modification methods at the molecular scale,focusing on the interfacial bonding force between silicon and carbon.Next,it will summarize various nanostructures and special shapes in the nanoscale to explore the construction of silicon/carbon composites.Lastly,the review will provide an analysis of microscale control approaches,focusing on the formation of composite particle with micron size and the utilization of micro-Si.This review provides a comprehensive overview of the multi-scale design of silicon/carbon composite anode materials and their optimization strategies to enhance the performance of lithium-ion batteries.

Natural forests exhibit higher organic carbon concentrations and recalcitrant carbon proportions in soil than plantations:a global data synthesis

Different chemical compositions of soil organic carbon(SOC)affect its persistence and whether it signifi-cantly differs between natural forests and plantations remains unclear.By synthesizing 234 observations of SOC chemical compositions,we evaluated global patterns of concentra-tion,individual chemical composition(alkyl C,O-alkyl C,aromatic C,and carbonyl C),and their distribution even-ness.Our results indicate a notably higher SOC,a markedly larger proportion of recalcitrant alkyl C,and lower easily decomposed carbonyl C proportion in natural forests.How-ever,SOC chemical compositions were appreciably more evenly distributed in plantations.Based on the assumed con-ceptual index of SOC chemical composition evenness,we deduced that,compared to natural forests,plantations may have higher possible resistance to SOC decomposition under disturbances.In tropical regions,SOC levels,recalcitrant SOC chemical composition,and their distributed evenness were significantly higher in natural forests,indicating that SOC has higher chemical stability and possible resistance to decomposition.Climate factors had minor effects on alkyl C in forests globally,while they notably affected SOC chemi-cal composition in tropical forests.This could contribute to the differences in chemical compositions and their distrib-uted evenness between plantations and natural stands.

Protective Graphite Coating for Two-Dimensional Carbon/Carbon Composites

Two-dimensional carbon/carbon(2D C/C)composites are a special class of carbon/carbon composites,generally obtained by combining resin-impregnated carbon fiber clothes,which are then cured and carbonized.This study deals with the preparation of a protective coating for these materials.This coating,based on graphite,was prepared by the slurry method.The effect of graphite and phenolic resin powders with different weight ratios was examined.The results have shown that the coating slurry can fill the pores and cracks of the composite surface,thereby densifying the surface layer of the material.With the increase of the graphite powder/phenolic resin weight ratio,the coating density is enhanced while the coating surface flatness decreases;moreover,the protective ability of coating against erosion first increases(from 1:3 to 2:2)and then decreases(from 2:2 to 3:1).When the weight ratio is about 1:1,the coating for 2D C/C composites exhibits the best erosion resistance,which greatly aids these materials during gas quenching.In this case,the erosion rate is decreased by approximately 41.5%at the impact angle of 30°and 52.3%at normal impact,respectively.This can be attributed to the ability of the coating slurry to infiltrate into the substrate,thereby bonding the fibers together and increasing the compactness of the 2D C/C composites.

Numerical study of directional heat transfer in composite materials via controllable carbon fiber distribution

Carbon fiber reinforced polyamide 12(CF/PA12),a new material renowned for its excellent mechanical and thermal properties,has drawn significant industry attention.Using the steady-state research to heat transfer,a series of simulations to investigate the heat transfer properties of CF/PA12 were conducted in this study.Firstly,by building two-and three-dimensional models,the effects of the porosity,carbon fiber content,and arrangement on the heat transfer of CF/PA12 were examined.A validation of the simulation model was carried out and the findings were consistent with those of the experiment.Then,the simulation results using the above models showed that within the volume fraction from 0% to 28%,the thermal conductivity of CF/PA12 increased greatly from 0.0242 W/(m·K)to 10.8848 W/(m·K).The increasing porosity had little influence on heat transfer characteristic of CF/PA12.The direction of the carbon fiber arrangement affects the heat transfer impact,and optimal outcomes were achieved when the heat flow direction was parallel to the carbon fiber.This research contributes to improving the production methods and broadening the application scenarios of composite materials.

Why Sustainable Porous Carbon Should be Further Explored as Radar-Absorbing Material? A Comparative Study with Different Nanostructured Carbons

Radar Absorbing Materials(RAM)are a class of composites that can attenuate incident electromagnetic waves to avoid radar detection.Most carbon allotropes that have the potential to be used as RAM are either carbon nano-tubes(CNTs),graphene,carbon black(CB)and ultimately,sustainable porous carbon(SPC).Here,black wattle bark waste(following tannin extraction)was used as a sustainable source to produce SPC made from biomass waste.It was characterized and used as afiller for a silicone rubber matrix to produce aflexible RAM.The elec-tromagnetic performance of this composite was compared with composites made with commercial CB and CNT through reflection loss(RL),where-10 dB is equivalent to 90%of attenuation.These composites were evaluated in single-layer,double-layer,and as radar absorbing structures(RAS)with the aim of improving their effective absorption bandwidth(EAB)performances and a reduction in costs.The CNT composite presented a RL of-26.85 dB at 10.89 GHz and an EAB of 2.6 GHz with a 1.9 mm thickness,while the double-layer structures using CNT and SPC provided a RL of-19.74 dB at 10.75 GHz and an EAB of 2.51 GHz.Furthermore,the double-layer structures are~42%cheaper than the composite using only CNT since less material is used.Finally,the largest EAB was achieved with a RAS using SPC,reaching~2.8 GHz and a RL of-49.09 dB at 10.4 GHz.Summarizing,SPC made of black wattle bark waste can be a competitive,alternative material for use as RAM and RAS since it is cheaper,sustainable,and suitable for daily life uses such as absorbers for anechoic chambers,sensors,and elec-tromagnetic interference shields for electronics,wallets,vehicles,and others.

Regulatable Orthotropic 3D Hybrid Continuous Carbon Networks for Efficient Bi-Directional Thermal Conduction

Vertically oriented carbon structures constructed from low-dimen-sional carbon materials are ideal frameworks for high-performance thermal inter-face materials(TIMs).However,improving the interfacial heat-transfer efficiency of vertically oriented carbon structures is a challenging task.Herein,an orthotropic three-dimensional(3D)hybrid carbon network(VSCG)is fabricated by depositing vertically aligned carbon nanotubes(VACNTs)on the surface of a horizontally oriented graphene film(HOGF).The interfacial interaction between the VACNTs and HOGF is then optimized through an annealing strategy.After regulating the orientation structure of the VACNTs and filling the VSCG with polydimethylsi-loxane(PDMS),VSCG/PDMS composites with excellent 3D thermal conductive properties are obtained.The highest in-plane and through-plane thermal conduc-tivities of the composites are 113.61 and 24.37 W m^(-1)K^(-1),respectively.The high contact area of HOGF and good compressibility of VACNTs imbue the VSCG/PDMS composite with low thermal resistance.In addition,the interfacial heat-transfer efficiency of VSCG/PDMS composite in the TIM performance was improved by 71.3%compared to that of a state-of-the-art thermal pad.This new structural design can potentially realize high-performance TIMs that meet the need for high thermal conductivity and low contact thermal resistance in interfacial heat-transfer processes.

Study of the Diffusion Behavior of Seawater Absorption in Multi-Walled Carbon Nanotubes/Halloysite Nanotubes Hybrid Nanofillers Modified Epoxy-Based Glass/Carbon Fiber Composites

In the maritime industry, cost-effective and lightweight Fiber Reinforced Polymer (FRP) composites offer excellent mechanical properties, design flexibility, and corrosion resistance. However, their reliability in harsh seawater conditions is a concern. Researchers address this by exploring three approaches: coating fiber surfaces, hybridizing fibers and matrices with or without nanofillers, and interply rearrangement. This study focuses on evaluating the synergistic effects of interply rearrangement of glass/carbon fibers and hybrid nanofillers, specifically Multi-walled carbon nanotubes (MWCNT) and Halloysite nanotubes (HNT). The aim is to enhance impact properties by minimizing moisture absorption. Hybrid nanocomposites with equal-weight proportions of two nanofillers: 0 wt.%, 1 wt.%, and 2 wt.% were exposed to seawater for 90 days. Experimental data was subjected to modelling through the application of Predictive Fick’s Law. The study found that the hybrid composite containing 2 wt.% hybrid nanofillers exhibited a 22.10% increase in impact performance compared to non-modified counterparts. After 90 days of seawater aging, the material exhibited enhanced resistance to moisture absorption (15.74%) and minimal reduction in impact strength (8.52%) compared to its dry strength, with lower diffusion coefficients.

Stable Carbon Isotopic Compositions of Methylated-MTTC in Crude Oils from Saline Lacustrine Depositional Environment:Source Implications

Significantly high abundant methyl-Methyl Trimethyl Tridecyl Chromans （MTTCs） have been detected in aromatic hydrocarbon fractions in crude oils from the Jizhong Depression and Jianghan Basin. The distribution of these compounds is dominated by methyl-MTTC and dimethyl- MTTC series, which indicate diagenetic products of a hypersaline depositional environment in the early stage and show a low degree of methylation. The occurrence of significantly high abundant methyl-MTTC depends mainly on good preservation conditions with a strongly reductive, hypersaline and water-columned depositional environment and subsequent non-intensive diagenetic transformations. The stable carbon isotopic compositions of the methyl-MTTCs and dimethyl-MTTCs in two samples are far different from the stable carbon isotopic composition of C30 hopane of apparent bacteria biogenesis （up to 4.11‰ and 5.75‰, respectively）. This obviously demonstrates that the methyl-MTTC and dimethyl-MTTCs cannot be of bacteria origin, which is different from the previous point of view about non-photosynthetic bacteria products or possible bacteria-reworked products. On the contrary, the stable carbon isotopic compositions of methyl-MTTC and dimethyl-MTTCs in the two samples were similar to that of the same carbon-numbered n-alkanes （nC27-nC28-nC29）, which indicates that they share the same source origin. Especially in the crude oil from the Zhao61 well, stable carbon isotopic compositions are also similar to that of the same carbon-numbered steranes with ααα- 20R isomer （mostly less than 0.4‰）. In consideration of the results of previous studies on saline lake ecological sedimentation, the authors hold that the methyl-MTTC and dimethyl-MTTCs in the saline lake sediments should be of algal biogenesis origin.

Evolution of Carbon Isotope Composition in Potential Global Stratotype Section and Point at Luoyixi, South China, for the Base of the Unnamed Global Seventh Stage of Cambrian System

This work deals with the evolution of carbon isotope composition in the Luoyixi （罗依溪） Section, a candidate of the Global Standard Stratotype-section and Point （GSSP）, defining the base of the as-yet-undefined seventh stage of Cambrian System at the first appearance of the cosmopolitan agnostoid Lejopyge iaevigata. This level is favored in a vote of International Subcommission on Cambrian Stratigraphy （ISCS） as the biohorizon for defining the base of a global stage. Two hundred and sixty-four samples for carbon and oxygen isotope analysis have been collected from the carbonate successions at an interval of 0.25 to 0.5 m in this section. Results of the carbon isotope data exhibit a remarkable disciplinarian trend. The pattern of the carbon isotope evolution is gently undulant with a relatively long period during the underlying Drumian Stage, and then the values of δ13C fluctuate sharply with a short period in provisional seventh stage. The onset of sharp fluctuation in the δ13C values begins at the proposed GSSP level, defining the base of the global seventh stage, where δ13C values change from a gentle trend to a sharp trend. Distinct covariant-relationships among δ13C,δ18O, and sea level fluctuations suggest that a warming change in paleoclimate took place during the early global seventh stage, which led to a positive shift in δ13C values.

Influence of the Feed Gas Composition on the Fischer-Tropsch Synthesis in Commercial Operations

Key technical challenges relating to the Fischer-Tropsch （F-T） synthesis applied in the commercialization of coal/gas-to-liquids （CTL/GTL） technologies have been reviewed. Based on the experiences accumulated from pilot plant, semi-work test and lab researches, the influences of the H2/CO ratio and the CO2 in the feed gas on the F-T process as well as on CTL/GTL complex in terms of product yields, energy efficiency and carbon utilization efficiency have been studied. Being contrary to the current design schemes for F-T process using the coal derived syngas and the iron-based cata lyst, it is suggested to feed the F-T synthesis unit with a syngas having a H2/CO ratio of 0.5 and then adjusting to 1.4 via the recycling process. As a result, the carbon efficiency of the whole plant could be reached to as high as 50%. For the issue of CO2 addition to the feed gas, it is proved that only a diluting role is played under the current commercial slurry phase F-T process.

Biogenic carbonate formation and sedimentation in the Xisha Islands: evidences from living Halimeda

A recent island survey reveals that the Xuande Atoll and the Yongle Atoll in the Xisha Islands can be classified into one of two systems：the depleted atoll system and growth atoll system;the survey also indicates that the decreased area of several shoals is an unbearable burden for the Xisha Islands, of which the largest island area is 2.13 km2 and the minimum elevation is 1.4 m. According to a survey on the ecological characteristics of Halimeda in the Laolongtou breaker zone of Shidao Island in the Xisha Islands, the green and white living Halimeda are collected, the isotopic ages of 14C contained in the Halimeda are shown to be 27 years and 55 years, respectively, and carbonate mainly occurs in five types, i.e., luster, segment, sand, sand grain, and marl in the formation. The Halimeda segments mainly provide the carbonate sediments of long-term biogenic deposits in the reef environment and the annual productivity per area is 60–100 g/m2;the characteristics of the microstructure of the Halimeda are analyzed, the aragonite raphide carbonate is deposited and enriched in the cortexes, medullas and cysts, and the Halimeda generally contain major elements such as C, O, Ca, Cl, Mg, K, Na, S and Al, and are rich in trace elements such as tellurium （Te）, rhodium （Rh） and strontium. It is believed that the Halimeda grow slowly, including the biotic community of reef corals in the reef areas, thus they possess an environmental remediation capacity, but it takes much time to remedy the environment, and it is necessary to make the law to protect the diversity and vulnerability of the Xisha marine ecology, the ecology of the reef community and the island environment in a scientific way. As indicated in the survey, under the background of global warming and sea-level rise, the discovery of large amounts of Halimeda in the Laolongtou sea area is significant for the natural increase of the depleted atoll system of the Xuande Atoll, while the Halimeda segments represent the primary form of the fossil Halimeda, of which the species can be identified and preserved in great numbers under geological conditions. The Miocene was discovered in large amounts in the Xichen-1 well, therefore the study on the characteristics and mechanism of Halimeda carbonate sediments plays a pivotal role in the formation and construction of organic reefs in the South China Sea as well as oil and gas exploration.

Sources of organic matter and paleo-environmental implications inferred from carbon isotope compositions of lacustrine sediments at Inexpressible Island, Ross Sea, Antarctica

The carbon isotopic composition of organic matter （δ^13Corg） was determined in two sediment cores （IIL1 and IIL9） recovered from Inexpressible Island, Ross Sea, Antarctica, and analyzed to identify the sources of that organic matter. The δ^13Corg values of sediments of IIL9 were found to vary between -14.6‰ and -11.6‰, with a mean of-13.4‰ （n=48）. These values were significantly higher than those of IIL1 sediments which varied between -23.2‰ and -20.4‰, with a mean of-21.8%o （n=55）. The variation in δ^13Corg values in these two sediment cores indicate different sources of organic matter, The relatively high 6~3Corg values in IIL9 are in accordance with a source from algae, while the low δ^13Corg values in IIL1 evince significant influence from penguin guano with algae as the secondary source. Compared with the reference data from other high-latitude lake sediments and plants, the δ^13Corg values in IIL9 were extremely high, a result likely related to intense competition for CO2 assimilation among algal species during the growing season in this relatively shallow pond. These results indicate that sedimentary δ^13Corg is a reliable proxy for paleo-primary productivity in ponds at Inexpressible Island.

Variation characteristics of CO_(2) in a newly-excavated soil profile,Chinese Loess Plateau:Excavation-induced ancient soil organic carbon decomposition

Soils of the Chinese Loess Plateau(CLP)contain substantial amounts of soil inorganic carbon(SIC),as well as recent and ancient soil organic carbon(SOC).With the advent of the Anthropocene,human perturbation,including excavation,has increased soil CO_(2) emission from the huge loess carbon pool.This study aims to determine the potential of loess CO_(2) emission induced by excavation.Soil CO_(2) were continuously monitored for seven years on a newly-excavated profile in the central CLP and the stable C isotope compositions of soil CO_(2) and SOC were used to identify their sources.The results showed that the soil CO_(2) concentrations ranged from 830μL·L^(-1) to 11190μL·L^(-1) with an annually reducing trend after excavation,indicating that the human excavation can induce CO_(2) production in loess profile.Theδ^(13) C of CO_(2) ranged from–21.27‰to–19.22‰(mean:–20.11‰),with positive deviation from top to bottom.The range of δ^(13)CSOC was–24.0‰to–21.1‰with an average of–23.1‰.Theδ^(13) C-CO_(2) in this study has a positive relationship with the reversed CO_(2) concentration,and it is calculated that 80.22%of the soil CO_(2) in this profile is from the microbial decomposition of SOC and 19.78%from the degasification during carbonate precipitation.We conclude that the human excavation can significantly enhance the decomposition of the ancient OC in loess during the first two years after perturbation,producing and releasing soil CO_(2) to atmosphere.

The Carbon and Oxygen Stable Isotopic Compositions and its Paleoenvironment Significance from the Upper Yunlong Formation of Paleogene in Lanping Basin,Yunnan

Lanping Basin is one part of the three-rivers Tethyan tectonic domain and located in western Yunnan or southeastern Qinghai-Tibet Plateau.Yunlong salt-bearing Formation had formed under the condition of strong arid