为获得一种绿色高效的羧甲基多孔淀粉制备工艺,本研究以酶解制得的多孔木薯淀粉为原料,氯乙酸钠为醚化剂,氢氧化钠为催化剂,采用机械活化协同固相醚化法制备羧甲基多孔淀粉,通过单因素实验探究各因素对羧甲基多孔淀粉取代度(Degree of s...为获得一种绿色高效的羧甲基多孔淀粉制备工艺,本研究以酶解制得的多孔木薯淀粉为原料,氯乙酸钠为醚化剂,氢氧化钠为催化剂,采用机械活化协同固相醚化法制备羧甲基多孔淀粉,通过单因素实验探究各因素对羧甲基多孔淀粉取代度(Degree of substitution,DS)的影响,并探讨羧甲基多孔淀粉在酱油中的应用。结果表明,机械活化协同固相法制备羧甲基多孔淀粉的最佳工艺条件为:多孔淀粉与氯乙酸钠的物质的量之比为1:1,氢氧化钠质量分数为18.8%,球磨时间1.5 h,反应温度50℃,此条件下制备得到的羧甲基多孔淀粉取代度最高为0.2532。通过红外光谱仪(Infrared spectrometer,FTIR)、X-射线粉末衍射仪(X-ray powder diffractometer,XRD)和扫描电镜(Scanning electron microscope,SEM)等表征,进一步证实多孔淀粉发生了羧甲基化反应。随着羧甲基多孔淀粉DS的增大其冷水溶解度、吸水率和柠檬黄吸附量增大;当DS为0.2532时,羧甲基多孔淀粉的冷水溶解度达到64.94%,吸水率达到180.73%,柠檬黄吸附量达到2.5086 mg·g^(-1)。羧甲基多孔淀粉所制备的粉末酱油相比于木薯淀粉和多孔淀粉所制备的粉末酱油溶解性更好,吸潮性更低,氨基酸态氮含量更高,与原酱油最接近。因此,机械活化协同固相醚化法可有效制备羧甲基多孔淀粉,该法操作简单,绿色环保,取代高,为多孔淀粉的开发利用提供了科学依据。展开更多
Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethy...Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethylation of starch, acrylate constituent units of acrylate copolymers, and copolymer content of the film on the properties were investigated. The mechanical properties were evaluated in terms of tensile strength, breaking elongation, abrasion resistance, and flex-fatigue resistance. Film morphology was examined with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and atomic force microscope （AFM）. It was found that the properties depended on the degree of substitution of carboxymethyl starch, chemical structure of acrylate units, and content of acrylate copolymer. Phase-separation of the two ingredients occurred within film matrix and the separation was decreased after starch carboxymethylation. Breaking elongation and flex-fatigue resistance of the film reached maximmns when acrylate copolymer content was 50%. Excessively increasing the content of acrylate copolymer reduced the film properties.展开更多
文摘为获得一种绿色高效的羧甲基多孔淀粉制备工艺,本研究以酶解制得的多孔木薯淀粉为原料,氯乙酸钠为醚化剂,氢氧化钠为催化剂,采用机械活化协同固相醚化法制备羧甲基多孔淀粉,通过单因素实验探究各因素对羧甲基多孔淀粉取代度(Degree of substitution,DS)的影响,并探讨羧甲基多孔淀粉在酱油中的应用。结果表明,机械活化协同固相法制备羧甲基多孔淀粉的最佳工艺条件为:多孔淀粉与氯乙酸钠的物质的量之比为1:1,氢氧化钠质量分数为18.8%,球磨时间1.5 h,反应温度50℃,此条件下制备得到的羧甲基多孔淀粉取代度最高为0.2532。通过红外光谱仪(Infrared spectrometer,FTIR)、X-射线粉末衍射仪(X-ray powder diffractometer,XRD)和扫描电镜(Scanning electron microscope,SEM)等表征,进一步证实多孔淀粉发生了羧甲基化反应。随着羧甲基多孔淀粉DS的增大其冷水溶解度、吸水率和柠檬黄吸附量增大;当DS为0.2532时,羧甲基多孔淀粉的冷水溶解度达到64.94%,吸水率达到180.73%,柠檬黄吸附量达到2.5086 mg·g^(-1)。羧甲基多孔淀粉所制备的粉末酱油相比于木薯淀粉和多孔淀粉所制备的粉末酱油溶解性更好,吸潮性更低,氨基酸态氮含量更高,与原酱油最接近。因此,机械活化协同固相醚化法可有效制备羧甲基多孔淀粉,该法操作简单,绿色环保,取代高,为多孔淀粉的开发利用提供了科学依据。
基金the Open Project Program of Key Laboratory of Eco-Textiles,Ministry of Education,China(No.KLET0617)
文摘Carboxymethyl starch with lower degree of substitution was, blended with acrylate copolymer for revealing the relation between mechanical properties and chemical structure of blending film. Effects of carboxymethylation of starch, acrylate constituent units of acrylate copolymers, and copolymer content of the film on the properties were investigated. The mechanical properties were evaluated in terms of tensile strength, breaking elongation, abrasion resistance, and flex-fatigue resistance. Film morphology was examined with X-ray diffraction （XRD）, scanning electron microscopy （SEM）, and atomic force microscope （AFM）. It was found that the properties depended on the degree of substitution of carboxymethyl starch, chemical structure of acrylate units, and content of acrylate copolymer. Phase-separation of the two ingredients occurred within film matrix and the separation was decreased after starch carboxymethylation. Breaking elongation and flex-fatigue resistance of the film reached maximmns when acrylate copolymer content was 50%. Excessively increasing the content of acrylate copolymer reduced the film properties.
