Carboxymethyl-β-Cyclodextrin for Chiral Separation of Basic Drugs by Capillary Elcctrophoresis

Four basic drugs were separated by capillary electrophoresis (CE) usingcarboxymethyl-β-yclodextrin (CM-0-CD) as chiral selector. The effects of CM-β-CDconmptration, applied voltage. operation temperature were investigated. Under the selectedconditions. norephedrine. ofloxacin. terbutaline and chlorpheniramine were enantiomerallybaieline-separated using H3PO4-triethanolamine buffer at PH 3 containing 10, 5.5, 2. 2mmol/LCM-β-CD respectively.

Glycine-β-cyclodextrin-assisted cometabolism of phenanthrene and pyrene by Pseudomonas stutzeri DJP 1 from marine sediment

Cometabolic degradation is currently an effective and extensively way to remove high molecular weight polycyclic aromatic hydrocarbons(HMW-PAHs).Unfortunately,due to low bio-accessibility and high biotoxicity,the cometabolic degradation rate of HMW-PAHs is limited.Glycine-β-cyclodextrin(GCD)was obtained through amino modification ofβ-cyclodextrin(BCD)and added to cometabolic system of phenanthrene(PHE)and pyrene(PYR)to assist PYR biodegradation.Results show that the addition of GCD(100 mg/L)effectively improved the removal rate of PYR(20 mg/L)by 42.3%.GCD appeared to increase the bio-accessibility and reduce the biotoxicity of PHE and PYR,and then promoted the growth of Pseudomonas stutzeri DJP1 and stimulated the elevation of dehydrogenase(DHA)and catechol 12 dioxygenase(C12O)activities.The phthalate metabolic pathway was accelerated,which improved the cometabolic degradation.This study provided a new reference for the cometabolic degradation of HMW-PAHs.

Morphological Evolution of Self-Assembled Sodium Dodecyl Sulfate/Dodecyltrimethylammonium Bromide@Epoxy-β-Cyclodextrin Supramolecular Aggregates Induced by Temperature

Bio-based cyclodextrins(CDs)are a common research object in supramolecular chemistry.The special cavity structure of CDs can form supramolecular self-assemblies such as vesicles and microcrystals through weak interaction with guest molecules.The different forms of supramolecular self-assemblies can be transformed into each other under certain conditions.The regulation of supramolecular self-assembly is not only helpful to understand the self-assembly principle,but also beneficial to its application.In the present study,the self-assembly behavior of epoxy-β-cyclodextrin(EP-β-CD)and mixed anionic and cationic surfactant system(sodium dodecyl sulfate/dodecyltrimethylammonium bromide,SDS/DTAB)in aqueous solution was studied.Morphological and particle size characterization found that the SDS/DTAB@EP-β-CD complex,as the basic building unit,self-assembled into worm-like micelles at lower temperatures and vesicles at higher temperatures.Nuclear magnetic resonance(NMR)and Fourier transform infrared spectroscopy(FT-IR)analysis revealed that the driving force for the formation of vesicles and worm-like micelles was the hydrogen bonds between EP-β-CD molecules,while water molecules played an important role in promoting vesicle formation between SDS/DTAB@EP-β-CD units.Herein,the mechanism of the morphologic transformation of SDS/DTAB@EP-β-CD supramolecular aggregates induced by temperature was elucidated by exploring the self-assembly process,which may provide an excellent basis for the development of delivery carriers.

Adsorption of Phenanthrene in Soil to Biochar Modified by β-Cyclodextrin

In this study, the adsorption effect of β-cyclodextrin modified biochar (BC) on phenanthrene (PHE) in contaminated soil was investigated, aiming to provide an efficient and environmentally friendly remediation strategy for Polycyclic Aromatic Hydrocarbons (PAHs) contaminated soil. Through kinetic and isotherm analysis, β-CDBC-CA showed excellent phenanthrene adsorption performance, and the adsorption effect increased with the increase of time and was affected by temperature. The results show that β-CDBC-CA can not only effectively adsorb phenanthrene in soil, but also serve as a surfactant to help desorption phenanthrene adsorbed by soil organic matter and improve the efficiency of microbial degradation. The experimental data showed that the Elovich model could describe the adsorption behavior of β-CDBC-CA on phenanthrene well, while Langmuir and Freundlich models performed better in fitting parameters, revealing the adsorption mechanism of phenanthrene in contaminated soil by β-cyclodextrin-modified biochar. In addition, temperature has a significant effect on the adsorption capacity of β-CDBC-CA, and its application in soil remediation can be optimized by adjusting temperature. This study not only provides new materials and technical means for soil remediation but also provides important data support for an in-depth understanding of the environmental behavior of PAHs. By citing relevant research results, this study further improves the control and understanding of environmental risks of PAHs, which is of great significance for the protection of ecological environment and human health.

Synthesis and Characterization of β-Cyclodextrin Modified Biochar Environmental Remediation Materials

In this paper, biochar (BC) was used as raw material, activated by deionizing aqueous solution, NaCl solution, CA solution and HCl solution respectively. Epichlorohydrin (EPI) was used as crosslinking agent, and β-cyclodextrin (β-CD) was used to modify biochar (BC). The prepared modified biochar materials were labeled with β-CDBC, β-CDBC-Na, β-CDBC-CA and β-CDBC-H, respectively. The infrared spectrum, X-ray diffractometer, scanning electron microscope and specific surface area of the four modified materials were tested. The results showed that the C-O stretching vibration peak at 1020 cm−1 of the modified materials was slightly offset compared with that of biochar. The characteristic absorption peaks of XRD pattern decrease obviously at 2θ = 26.7˚ and 29.5˚. It can be obviously observed on the electron microscope image that the surface is loaded or formed clathrates, and BET data and graphs also show that the specific surface area of the modified biochar is larger. Therefore, β-cyclodextrin successfully modified biochar and formed clathrates on the surface of biochar or was loaded in the pore structure of biochar, especially β-CDBC-CA achieved better modification effect. Because biochar and β-cyclodextrin raw materials are cheap, easy to prepare and green, and less prone to secondary pollution, it has a good advantage in environmental governance.

Evaluation of soil washing process with carboxymethyl-β-cyclodextrin and carboxymethyl chitosan for recovery of PAHs/heavy metals/fluorine from metallurgic plant site

Polycyclic aromatic hydrocarbons（PAHs）/heavy metals/fluorine（F） mixed-contaminated sites caused by abandoned metallurgic plants are receiving wide attention. To address the associated environmental problems,this study was initiated to investigate the feasibility of using carboxymethyl-β-cyclodextrin（CMCD） and carboxymethyl chitosan（CMC） solution to enhance ex situ soil washing for extracting mixed contaminants. Further,Tenax extraction method was combined with a first-three-compartment model to evaluate the environmental risk of residual PAHs in washed soil. In addition,the redistribution of heavy metals/F after decontamination was also estimated using a sequential extraction procedure. Three successive washing cycles using50 g/L CMCD and 5 g/L CMC solution were effective to remove 94.3% of total PAHs,93.2% of Pb,85.8% of Cd,93.4% of Cr,83.2% of Ni and 97.3% of F simultaneously. After the 3rd washing,the residual PAHs mainly existed as very slowly desorbing fractions,which were in the form of well-aged,well-sequestered compounds; while the remaining Pb,Cd,Cr,Ni and F mainly existed as Fe–Mn oxide and residual fractions,which were always present in stable mineral forms or bound to non-labile soil fractions. Therefore,this combined cleanup strategy proved to be effective and environmentally friendly.

Preparation and chromatographic evaluation of a chiral stationary phase based on carboxymethyl-β-cyclodextrin for high-performance liquid chromatography

A chiral stationary phase （CSP） was prepared by chemically bonding carboxymethyl-β-cyclodextrin （CM- β-CD） onto 3-aminopropyl silica gel through amidation reaction in water solution and was characterized by Fourier transform infrared spectroscopy （FT-IR）, element analysis （EA） and thermal gravimetry analysis （TGA）. The chromatographic performance was evaluated with 24 racemates under reversedphase conditions, The effect of salt, organic modifier, mobile phase pH and structures of analytes were discussed. In comparison with native β-CD bonded column, CYCLOBOND 12000, CM-β-CD CSP exhibited enhanced enantioseparation.

Preparation of waterborne polyurethane/β-cyclodextrin composite nanosponge by ion condensation method and its application in removing of dyes from wastewater

Currently,polymer nanosponges have received extensive attention.However,developing new synthetic techniques for novel nanosponges remains a challenge.Furthermore,to date,composite nanosponge adsorbents based on waterborne polyurethane(WPU)andβ-cyclodextrin(β-CD)have not been reported.Herein,a novel green method,ion condensation method,was developed in this study for the preparation of polymer nanosponge adsorbents for efficient removal of dyes from wastewater.Based on the principle of charge repulsion between nanoparticles to maintain emulsion stability,waterborne polyurethane/β-cyclodextrin composite nanosponges(WPU-x,y)were prepared by coagulating the emulsions synthesized from 2,2-dimethylolpropionic acid,polypropylene glycol and hexamethylene diisocyanate as raw materials in a mixture of hydrochloric acid and anhydrous ethanol.The structure and appearance of WPU-x,y were characterized by attenuated total reflectance Fourier transform infrared spectroscopy,thermal gravimetric analyzer,scanning electron microscope and mercury intrusion porosimetry.The adsorption capacity of WPU-x,y was tested by parameters such as cross-linking degree,β-CD dosage,contact time,initial dye concentration and p H value.The study found that WPU-4,4.62 had the best adsorption effect on methylene blue(MB),the maximum removal rate was 93.42%,and the maximum adsorption capacity was 136.03 mg·g^(-1).Moreover,the Sips isotherm and pseudo-second-order-model were suitable for MB adsorption.Therefore,this study provides some perspectives for the fabrication of nanosponge adsorbents.

CMC-PVA-β-CD三元复合水凝胶的制备

以羧甲基纤维素(CMC)、聚乙烯醇(PVA)、β-环糊精(β-CD)为原料,在碱性条件下与环氧氯丙烷(ECH)发生交联反应,制备具有高溶胀性能的CMC-PVA-β-CD三元复合水凝胶,并研究了CMC,PVA,ECH,β-CD添加量对水凝胶溶胀性能、力学性能的影响。结果表明:加入20.0 mL水,0.52 g CMC,0.20 g PVA,1.2 mL ECH,0.24 gβ-CD时,水凝胶溶胀率最高,为2 040.62 g/g,压缩应力为7.90 kPa。与PVA-CMC二元水凝胶相比,CMC-PVA-β-CD三元水凝胶的压缩应力和结晶度均有提高。该三元复合水凝胶具有较高的溶胀率和良好的力学性能,在生物医药、消毒杀菌领域具有很高的应用价值。

Biomimetic asymmetric Michael addition reactions in water catalyzed by amino-containing β-cyclodextrin derivatives

Nineβ‐cyclodextrin derivatives containing an amino group were synthesized via nucleophilic sub‐stitution from mono（6‐O‐p‐tolylsulfonyl）‐β‐cyclodextrin and used in asymmetric biomimetic Mi‐chael addition reactions in water at room temperature. The mechanism responsible for the moder‐ate activity and enantioselectivity of the β‐cyclodextrin derivatives was explored using nuclear magnetic resonance spectroscopy, namely 2D 1H rotating‐frame overhauser effect spectroscopy （ROESY）, ultraviolet absorption spectroscopy, and quantum chemical calculations, which provide a useful technique for investigating the formation of inclusion complexes. The effects of the pH of the reaction medium, theβ‐cyclodextrin derivative dosage, the structure of the modifying amino group, and various substrates on the yield and enantioselectivity were investigated. The results indicated that these factors had an important effect on the enantiomeric excess （ee） in the reaction system. Experiments using a competitor for inclusion complex formation showed that a hydrophobic cavity is necessary for enantioselective Michael addition. A comparison of the reactions using 4‐nitro‐β‐nitrostyrene and 2‐nitro‐β‐nitrostyrene showed that steric hindrance improved the enan‐tioselectivity. This was verified by the optimized geometries obtained from quantum chemical cal‐culations. An ee of 71%was obtained in the asymmetric Michael addition of cyclohexanone and 2‐nitro‐β‐nitrostyrene, using （S）‐2‐aminomethylpyrrolidine‐modified β‐CD as the catalyst, in an aqueous buffer solution, i.e., CH3COONa‐HCl （pH 7.5）.

Inclusion Complex of β-cyclodextrin with CTAB in Aqueous Solution

Cetyltrimethylammonium bromide （CTAB）/potassium bromide （KBr） micellar system has been used as a viscosity probe to study the inclusion complexation between β-cyclodextrin （β-CD） and CTAB. Viscosity measurements show that the inclusion complexation between β-CD and CTAB may cause the breakdown of CTAB/KBr wormlike micelles, resulting in the decrease of the solution viscosity. The viscosity minimum at Cβ-CD/CCTAB=2 indicate the molecular ratio of host molecule to guest molecule is 2：1 in the β-CD/CTAB inclusion complex.

Spectral Differences of the Molecule-ion Adducts of β-Cyclodextrin and Lithium Carbonate

A small shielding effect on the hydrogen atoms of chiral carbons of β-cyclodextrin （β-CD） was detected by 1H nuclear magnetic resonance, but a large environmental change of the chiral carbon atoms at high concentration ratios of lithium carbonate （Li2CO3） to β-CD was observed by polarimetry in aqueous solution. These findings urged us to investigate whether different formation conditions of the molecule-ion system between Li2CO3 and β-CD in solid state were involved in different spectral performances. To answer the question, we prepared three adducts of Li2CO3 to β-CD, i.e., samples 1, 2, and 3, by magnetic stirring, solvothermal and grinding conditions, respectively. Powder X-ray diffraction and Fourier transformation infrared spectroscopy provided the information of formation of the three molecule-ion adducts. Besides, scanning electron microscope images provided different surface information of the three adducts. Further, significant spectral differences in thermal behavior of these adducts were found by thermogravimetry and derivative thermogravimetry.

Preparation and Evaluation of Insulin-loaded Nanoparticles based on Hydroxypropyl-β-cyclodextrin Modified Carboxymethyl Chitosan for Oral Delivery

Novel insulin-loaded nanoparticles based on hydroxypropyl-β-cyclodextrin modified carboxymethyl chitosan（CMC-HP-β-CD） were prepared to improve the oral bioavailability of insulin. The CMC-HP-β-CD was characterized by FT-IR spectroscopy and 1H-NMR spectra. The insulin-loaded nanoparticles were prepared through crosslinking with calcium ions, and the morphology and size of the prepared nanoparticles were characterized by transmission electron microscopy（TEM） and dynamic light scattering（DLS）. Cumulative release in vitro study was performed respectively in simulated gastric medium fluid（SGF, p H=1.2）, simulated intestinal fluid（SIF, p H=6.8） and simulated colonic fluid（SCF, p H=7.4）. The encapsulation efficiency of insulin was up to 87.14 ± 4.32% through high-performance liquid chromatography（HPLC）. Statistics indicated that only 15% of the encapsulated insulin was released from the CMC-HP-β-CD nanoparticles in 36 h in SGF, and about 50% of the insulin could be released from the nanoparticles in SIF, whereas more than 80% was released in SCF. In addition, the solution containing insulin nanoparticles could effectively reduce the blood glucose level of diabetic mice. The cytotoxicity test showed that the samples had no cytotoxicity. CMC-HP-β-CD nanoparticles are promising candidates as potential carriers in oral insulin delivery systems.

β-Cyclodextrin promoted oxidation of aldehydes to carboxylic acids in water

A facile, efficient and substrate-selective oxidation of aldehydes to carboxylic acids with NaClO catalyzed by β-cyclodextrin in water has been developed. A series of aldehydes which could form inclusion complex with β-cyclodextrin （β-CD） were oxidized selectively with excellent yields.

Inclusion complex of tamibarotene with hydroxypropyl-β-cyclodextrin: Preparation,characterization, in-vitro and in-vivo evaluation

The goal of this study was to improve the solubility and oral bioavailability of tamibarotene by complexing it with hydroxypropyl-β-cyclodextrin(HP-β-CD).The inclusion complex of tamibarotene with hydroxypropyl-β-cyclodextrin(Am80-HP-β-CD)was prepared through a freeze-drying method at the mole ratio of 1:1(Am80:HP-β-CD).Fourier transform infrared spectroscopy(FT-IR)and differential scanning calorimetry(DSC)indicated the formation of Am80-HP-β-CD.In vitro dissolution studies showed that the solubility and dissolution percentage of Am80-HP-β-CD was improved substantially compared to Am80.An improved dissolution with approximately 97%drug release in 3 min was observed,in comparison with Am80 with approximately 60% release in 45 min.In vivo studies indicated that the AUC0-∞ has increased 2.79 times and the Cmax 4.37 times after the formation of inclusion complex.The decrease of tmaxindicated the Am80-HP-β-CD inclusion complex can be absorbed into blood faster.In short,the solubility and bio-availability of Am80 has notably increased with the complexation of HP-β-CD.Therefore,using the inclusion technique is a promising method to improve the solubility of insoluble drugs.

Deep oxidative desulfurization of gas oil based on sandwich-type polysilicotungstate supported β-cyclodextrin composite as an efficient heterogeneous catalyst

In this work,in order to obtain deep clean gas oil,a novel organic–inorganic hybrid(n-C4H9)4N)7H5Si2W18Cd4O68@β-cyclodextrin(abbreviated as TBA-Si WCd@β-CD)composite was synthesized by supporting quaternary ammonium salt of sandwich-type polysilicotungstate onβ-cyclodextrin(TBA-SiWCd@β-CD)as an efficient catalyst for oxidative desulfurization(ODS)of gas oil.The successful composition of the materials explained by the formation of host–guest inclusion complex,which confirmed through FTIR,UV–vis,XRD,SEM,and EDX characterization analyses.Experimental results revealed that the levels of sulfur content and mercaptan compounds of gas oil lowered with 97%removal efficiency.Compared with the ODS treatment of gas oil,the TBA-Si WCd@β-CD composite showed an outstanding catalytic performance for the oxidation of dibenzothiophene(DBT)in the prepared model fuel.The main factors that influence the desulfurization efficiency and the kinetic study of the ODS process were investigated.The prepared heterogeneous catalyst was found to give remarkable reusability for five runs without a discernible decrease in its activity.This study suggested the potential application of the TBA-Si WCd@β-CD catalyst for removal of hazardous sulfur compounds from gas oil fuel.

Mechanism and Kinetics of Thermal Dissociation of Inclusion Complex of β-Cyclodextrin and 1-Methylcyclopropene

The inclusion-complex of CD-MCP （β-cyclodextrin （β-CD） including 1-methylcyclopropene （1-MCP）） was prepared and characterized. Basing on programmed-heating procedure and weight-temperature analysis, as well as the application of Satava-Sestak＇s, Ozawa＇s and Kissinger＇s methods, the mechanism and kinetics of thermal dissociation of this inclusion complex were studied. An additional mass loss is found at 170-180℃. The mechanism of thermal dissociation of CD-MCP is dominated by a one-dimensional random nucleation and subsequent growth process （A2/3）. The activation energy Es and the pre-exponential factor AS for the process are 102.14 kJ/mol and 3.63×10^10s^-1, respectively. This ES value shows that there is no strong chemical intere, ctions between β-CD and 1-MC;P,

Preparation and characterization of β-cyclodextrin grafted N-maleoyl chitosan nanoparticles for drug delivery

β-cyclodextrin (CD) grafted N-maleoyl chitosan (CD-g-NMCS) with two different degrees of substitution (DS) of N-maleoyl (DS = 21.2% and 30.5%) were synthesized from maleic anhydride and chitosan bearing pendant cyclodextrin (CD-g-CS). CD-g-NMCS based nanoparticles were prepared via an ionic gelation method together with chitosan and CD-g-CS nanoparticles.The size and zeta potential of prepared CD-g-NMCS nanoparticles were 179.2~274.0 nm and 36.2~42.4 m V, respectively. In vitro stability test indicated that CD-g-NMCS nanoparticles were more stable in phosphate-buffered saline compared with chitosan nanoparticles. Moreover, a poorly water-soluble drug, ketoprofen (KTP), was selected as a model drug to study the obtained nanoparticle’s potentials as drug delivery carriers. The drug loading efficiency of CD-g-NMCS20 nanoparticles were 14.8% for KTP. MTT assay showed that KTP loaded CD-g-NMCS nanoparticles were safe drug carriers. Notably, in vitro drug release studies showed that KTP was released in a sustained-release manner for the nanoparticles. The pharmacokinetic of drug loaded CD-g-NMCS20 nanoparticles were evaluated in rats after intravenous administration. The results of studies revealed that, compared with free KTP, KTP loaded CD-g-NMCS20 nanoparticles exhibited a significant increase in AUC0→24h and mean residence time by 6.6-fold and 2.9-fold, respectively. Therefore, CD-g-NMCS nanoparticles could be used as a novel promising nanoparticle-based drug delivery system for sustained release of poorly water-soluble drugs. The carboxylic acid groups of the CD-g-NMCS molecule provide convenient sites for further structural modifications including introduction of tissue-or disease-specific targeting groups.

Inclusion complexes of cefuroxime axetil with β-cyclodextrin:Physicochemical characterization, molecular modeling and effect of Larginine on complexation

The inclusion complexes of poorly water-soluble cephalosporin, cefuroxime axetil(CFA), were prepared with β-cyclodextrin(βCD) with or without addition of L-arginine(ARG) to improve its physicochemical properties. We also investigated the effect of ARG on complexation efficiency(CE) of βCD towards CFA in an aqueous medium through phase solubility behaviour according to Higuchi and Connors. Although phase solubility studies showed AL(linear) type of solubility curve in presence and absence of ARG, the CE and association constant(Ks) of βCD towards CFA were significantly promoted in presence of ARG,justifying its use as a ternary component. The solid systems of CFA with βCD were obtained by spray drying technique with or without incorporation of ARG and characterized by differential scanning calorimetry(DSC), X-ray powder diffractometry(XRPD), scanning electron microscopy(SEM), and saturation solubility and dissolution studies. The molecular modeling studies provided a better insight into geometry and inclusion mode of CFA inside βCD cavity. The solubility and dissolution rate of CFA were significantly improved upon complexation with βCD as compared to CFA alone. However, ternary system incorporated with ARG performed better than binary system in physicochemical evaluation. In conclusion, ARG could be exploited as a ternary component to improve the physicochemical properties of CFA via βCD complexation.

Triple-transforming gel prepared byβ-cyclodextrin,diphenylamine and lithium chloride in N,N-dimethylacetamide

This paper describes a triple-transforming gel system （gel-sol-gel＇） for the first time, which is a thermo-responsive and multi- component organogel prepared by β-cyclodextrin （β-CD）, diphenylamine （DPA） and lithium chloride （LiCl） in N,N-dimethyla- cetamide （DMAC） in a suitable proportion based on the supramolecular interactions. In the triple-transfomaing gel system, a gel （gel A） could be formed by β-CD, DPA and LiCl in DMAC at room temperature based on stirring, then the gel could transform into a clear solution based on heating, and then the other gel （gel B） can be formed at a relatively high temperature （Tget, the gelation temperature by heating）. The two gel states in the triple-transforming gel system have different microstructures. This gel system was characterized by OM, SEM, IR and theology.