Impact of the Speed of Flat of a Typical Carding Machine on the Quality of Carded Sliver and 40 Ne Yarn

The carding cycle affects the sliver quality and the subsequent yarn attributes since it is the main sliver formation step. Processing parameters assume a significant part in affecting the nature of the eventual outcome in any sorts of production. In the case of carding machine, a higher production rate makes the operation more sensitive. And this will cause degradation in product quality. So optimization of speed is the talk of the town in spinning field [1]. Extreme higher speed can prompt fiber harm and unnecessary neps generation will corrupt the end result. Again lower speed will lessen the production rate which isn’t reasonable. So we need to discover the ideal speed which will be advantageous to both product quality and production rate. In carding machine, real operational activity happens between flats and cards [1]. From an ordinary perspective, high produce able cards generates higher level of speed. Speed of the cards impacts the carding cycle and the nature of the yarn and in practical point of view, flat’s level of speed is advanced and optimized. The aim of the project was to find out the optimum flat speed in the context of yarn quality. 40 Ne cotton yarns were produced with the slivers manufactured at different flat speeds such as 240, 260, 280, 300 and 320 mm/min. The quality parameters of slivers and yarns were tested and analyzed.

Redistribution of Impurity and Visible Foreign Matter in Cotton during Carding

Impurity redistribution during cotton carding was investigated. The content and size of impurity in card sliver,takerin droppings,flat strips,and cylinder screen droppings (including droppings under cylinder screen and cylinder-doffer triangle section)at four taker-in speeds were tested by using USTER AFIS. Results show that both total impurities and visible foreign matter (VFM)weights are increased. Impurities in cotton lap are carded and redistributed in card sliver, taker-in droppings, flat strips and cylinder screen droppings. Impurity percentage in taker-in droppings are the highest,followed by that in card sliver,that in flat strips and that in cylinder screen droppings. Cylinder screen has better dust-removing efficiency than flats. The average sizes of impurities in card sliver and cylinder screen droppings are decreased,whereas those of flat strips are increased and those of taker-in droppings is almost the same,in comparison with cotton lap. The impurity contents of card sliver,taker-in droppings,flat strips and cylinder screen droppings have tendencies to decrease with the increase of taker-in speed.