With the development of dyeing wastewater treatment biotechnology, the advantages of bioaugmentation bacteria gradually catch people’s eyes. Therefore, its construction and application research has also attracted the...With the development of dyeing wastewater treatment biotechnology, the advantages of bioaugmentation bacteria gradually catch people’s eyes. Therefore, its construction and application research has also attracted the attention of the majority of scholars. This article summaries the construction and application of bioaugmentation engineered bacteria used to treat dyeing wastewater in recent years, including the screening, domestication and application of single and mixed flora bacteria. In addition, the impact of the strengthening effect of all genes is also described in this paper. Finally, the optimization and promoted use of bioaugmentation bacteria are out looked.展开更多
To solve the problems of high Cr^(6+),Cr^(3+),SO_(4)^(2-)and H+concentrations,pollution and processing costs associated with agate dyeing industrial drainage,we prepared an immobilized gel mixture for the treatment of...To solve the problems of high Cr^(6+),Cr^(3+),SO_(4)^(2-)and H+concentrations,pollution and processing costs associated with agate dyeing industrial drainage,we prepared an immobilized gel mixture for the treatment of such drainage on the basis of microbial immobilization technology.The immobilized gel mixture was composed of sulfate-reducing bacteria(SRB),corn cob,and nano-Fe_(3)O_(4)(nFe_(3)O_(4)).We used a single-factor experiment to determine the optimal dose of each matrix component.We analyzed the mechanism underlying the treatment of agate dyeing wastewater with an immobilized gel mixture by X-ray diffraction and scanning electron microscopy detection.The results of the single-factor test showed that the best treatment was obtained under the following conditions for each matrix component:SRB mass percentage of 30%,nFe_(3)O_(4) dose of 3%,and corn cob mesh size of 100 and dose of 3%.On this basis,we conducted an L9(34)orthogonal experiment to determine the optimal proportion of each matrix component.The results showed that the best treatment was obtained when the gel mixture met the following conditions:SRB mass percentage of 40%,nFe_(3)O_(4) dose of 4%,and corn cob dose of 1%and mesh size of 100.Accordingly,the SO_(4)^(2-),Cr^(6+)and Cr^(3+)removal rates from the agate dyeing drainage were 70.54%,84.75%,and 73.80%,respectively;the total Fe and chemical oxygen demand releases were 1.086 mg·L^(-1)and 1104 mg·L^(-1),respectively;and the pH was 6.27.The gel mixture had the best treatment effect on agate dyeing wastewater under this composition ratio.展开更多
文摘With the development of dyeing wastewater treatment biotechnology, the advantages of bioaugmentation bacteria gradually catch people’s eyes. Therefore, its construction and application research has also attracted the attention of the majority of scholars. This article summaries the construction and application of bioaugmentation engineered bacteria used to treat dyeing wastewater in recent years, including the screening, domestication and application of single and mixed flora bacteria. In addition, the impact of the strengthening effect of all genes is also described in this paper. Finally, the optimization and promoted use of bioaugmentation bacteria are out looked.
基金funded by the National Natural Science Foundation of China(41672247,41102157,51304114)Liaoning Provincial Natural Science Foundation of China(2015020619)+1 种基金and Liaoning Provincial Department of Education(LJYL031,LJ2017FAL016)the project was supported by the discipline innovation team of Liaoning Technical University(LNTU20TD-21).
文摘To solve the problems of high Cr^(6+),Cr^(3+),SO_(4)^(2-)and H+concentrations,pollution and processing costs associated with agate dyeing industrial drainage,we prepared an immobilized gel mixture for the treatment of such drainage on the basis of microbial immobilization technology.The immobilized gel mixture was composed of sulfate-reducing bacteria(SRB),corn cob,and nano-Fe_(3)O_(4)(nFe_(3)O_(4)).We used a single-factor experiment to determine the optimal dose of each matrix component.We analyzed the mechanism underlying the treatment of agate dyeing wastewater with an immobilized gel mixture by X-ray diffraction and scanning electron microscopy detection.The results of the single-factor test showed that the best treatment was obtained under the following conditions for each matrix component:SRB mass percentage of 30%,nFe_(3)O_(4) dose of 3%,and corn cob mesh size of 100 and dose of 3%.On this basis,we conducted an L9(34)orthogonal experiment to determine the optimal proportion of each matrix component.The results showed that the best treatment was obtained when the gel mixture met the following conditions:SRB mass percentage of 40%,nFe_(3)O_(4) dose of 4%,and corn cob dose of 1%and mesh size of 100.Accordingly,the SO_(4)^(2-),Cr^(6+)and Cr^(3+)removal rates from the agate dyeing drainage were 70.54%,84.75%,and 73.80%,respectively;the total Fe and chemical oxygen demand releases were 1.086 mg·L^(-1)and 1104 mg·L^(-1),respectively;and the pH was 6.27.The gel mixture had the best treatment effect on agate dyeing wastewater under this composition ratio.
