High Sensitive Long Period Fiber Grating Sensor for Detection of Nitrite

A high sensitive long period fiber grating（LPFG） sensor for the detection of nitrite is proposed, which is realized by coating multiple poly（sodium 4-styrensulfonate）（PSS） and poly（diallyldimethylammonium） chloride （PDDA） layers on the fiber grating surface. The sensitivity of this LPFG sensor is maximum when the number of assembled layers is 70. Under this condition, a nitrite concentration of 3×10^-3 mol/L, which is lower than the National Food Additive Standard, 4.2×10^-3 mol/L, can be distinguished. The sensitivity is further increased by 30% when nitrite was determined in the sucrose solution with a concentration of 65%, which provides a new solution for the best refraction index approaching matched index of the fiber cladding. Compared with chemical methods, this nitrite detection technology offers some advantages, such as high accuracy, non toxicity, high speed, low cost, without chemical reagent, and is suitable for foodstuff security detection.

Ag-coated Long-period Fiber Grating

Based on coupled-mode theo ry , the eigenvalue equation of five-layered long-period fiber grating(LPFG) sens or with Ag film and gas-sensitive film overlays are firstly studied. The probl em of resolving complex eigenvalue equation on five-layered LPFG is analyzed, a nd the method of resolution is also given. Then the eigenvalue equation of three -layered metal cladding LPFG is analyzed, and the complex transcendental equati on is also discussed. The computing result shows that the coupling between the l ow-order EH modes and the core mode is much stronger than that between the low -order HE modes and the core mode.

Fabrication of long-period fiber gratings by CO_2 laser in fiber under tension

We demonstrate experimentally fabrication of CO2 laser written long-period fiber gratings （LPFGs） in single-mode fiber （SMF） under tension. New transmission dips can be generated due to the frozen-in stress in the fiber under tension. Dynamics analysis of laser writing process is performed to study the mechanism of the grating inscription. Experimental results show that the wavelength shift of new generated resonance dips can shift towards the longer or shorter wavelength with the increase of laser scanning cycles for gratings with different pitches.

Numerical Analysis of Fiber Bragg Grating and Long Period Fiber Grating Undergoing Linear and Quadratic Temperature Change

The coupled-mode equations for fiber Bragg grating （FBG） and long period fiber grating （LPFG） undergoing linear and quadratic temperature change were given. The effects of temperature gradient and quadratic temperature change on the reflectivity spectrum of fiber Braggs grating and the transmission spectrum of long period fiber grating were investigated using the numerical simulation, and the dependence relationships of the central wavelength shift, the full-width-athalf-maximum, and the peak intensity upon temperature gradient were also obtained. These relationships may be used to design a novel fiber optical sensor which can simultaneously measure the temperature and temperature gradient.

Review of Turn around Point Long Period Fiber Gratings

Long period fiber gratings are emerging as a potential candidate in the list of surrounding refractive index optical fiber sensors. Their sensitivity can be enhanced greatly if the grating period, fiber dimensions and surrounding refractive index are optimized in a way to operate at a point called turn around point on phase matching curves of these gratings. Turn around point LPFGs are well known for their ultrahigh sensitivity to external parameters. Potential of operating LPFG at or near turn around point has been investigated by many researchers in various applications including physical parameter sensing, adulteration detection, radiation dose, etc. Since TAP LPFGs are in investigation phase therefore a lot of rigorous & efficient work in finding techniques for optimizing their potential as sensor in chemical, biochemical, structural health monitoring is still to be carried out. A brief review of work carried out in this domain till now is presented here and key findings from literature review are highlighted.

On the Validity of the Effective Index Method for Long Period Grating Photonic Crystal Fibers

This paper focuses on the investigation of modal characteristics and sensing properties of long period grating photonic crystal fibers (LPG-PCFs). An improved effective index method is employed with an objective to study its limitations for various designs of LPG-PCFs. Results so obtained with the above method are compared with the corresponding values of multiple multipole (MMP) method results which points the range of validity and applicability of the improved effective index method to LPG-PCFs. It is shown that this method is excellent when the surrounding media is assumed to be air. However, it becomes less accurate when the fiber is immersed into a liquid with a refractive index close to that of the cladding.

Temperature Compensated Solution Concentration Measurement Based on a Cascaded SMS/LPFG Fiber Structure

In this paper, a hybrid optical fiber structure for solution concentration measurement with the temperature compensation is proposed. The structure consists of long period fiber grating (LPFG) and single mode-multimode-single mode (SMS) fiber structures. The sensing mechanism of the device is studied and verified by experiments. LPFG is sensitive to solution concentration and is affected by temperature crosstalk. SMS structure is not affected by solution concentration, but sensitive to ambient temperature. It can be used as a temperature compensation system. The sensitivity coefficients of LPFG and SMS on temperature and concentration were measured experimentally, and a dual-wavelength matrix was established to realize simultaneous measurement of solution temperature and concentration.

改进PDMS的高灵敏度C-LPFG丙酮气体传感器研究

本文研究了一种基于级联长周期光纤光栅(C-LFPG)丙酮气体传感器。以单个长周期光纤光栅(LPFG)结构为基础,对聚合物敏感涂层聚二甲基硅氧烷(PDMS)折射率变化进行了仿真分析,研究了LPFG和C-LPFG对丙酮气体的灵敏度的影响。结果表明:优化PDMS后C-LPFG传感器的灵敏度约为-605 nm/RIU,相较于传统C-LPFG的灵敏度增大了约6倍,是传统LPFG传感器灵敏度的5.26倍,检测范围扩大了约1.5倍。

Long Period Grating Imprinted on a Flat-Shaped Plastic Optical Fiber for Refractive Index Sensing

A corrugated surface long period grating(LPG)was fabricated on a flat-shaped plastic optical fiber(POF)as a refractive index(RI)sensor by a simple pressing with the heat pressure and mechanical die press print method.The light propagation characteristics of an LPG imprinted on a multi-mode POF were analyzed by the method of geometrical optics.Theoretical and experimental results showed that the structural parameters of the sensor affected the RI sensing performance,and the sensor with a thinner flat thickness,a deeper groove depth of the corrugated surface LPG,and a longer LPG exhibited better RI sensing performance.When the POF with a diameter of 1 mm was pressed with the heat pressure to a flat shape with a thickness of 600μm,an LPG with a period of 300μm,a groove depth of 200μm,and a length of 6 cm was fabricated on it,and the RI sensitivity of 1447%/RIU was obtained with a resolution of 5.494×10^(−6) RIU.In addition,the influences of the POF cladding,tilting of LPG,and bending of the sensing structure were investigated.The results demonstrated that after removing the cladding and tilting or bending the LPG,the RI sensing performance was improved.When the LPG imprinted on the flat-shaped POF was bent with a curvature radius of 6/πcm,the highest sensitivity of 6563%/RIU was achieved with a resolution of 2.487×10^(−9) RIU in the RI range of 1.3330–1.4230.The proposed sensor is a low-cost solution for RI measurement with the features of easy fabrication,high sensitivity,and intensity modulation at the visible wavelengths.

基于双峰谐振长周期光纤光栅的海水盐度传感器

为研制高灵敏海水盐度传感器,本文基于CO_(2)激光技术成功制备出一种工作在色散转折点(DTP)附近的长周期光纤光栅(LPFG)。首先,利用CO_(2)激光器在80μm细单模光纤上制备出工作在DTP附近的LPFG,证明了采用CO_(2)激光微加工技术制备较短周期LPFG的可能性。其次,通过调控CO_(2)激光器的制备周期,使高阶包层模式LP_(1,9)工作在DTP附近,从而显著提高了LPFG的折射率灵敏度。在双峰谐振增敏效应的作用下,当海水盐度从5.001‰变化到39.996‰时,光栅周期为115.4μm的双峰谐振LPFG平均灵敏度高达0.279 nm/‰。研究结果表明,本文制备的LPFG海水盐度传感器具有谐振损耗大和灵敏度高的优点,其在海水盐度监测领域具有较好的应用前景。

基于球形长周期光纤光栅的宽动态范围位移传感器实验研究

[目的]针对光纤位移传感器动态范围窄的问题,设计一种结构简单、易于制备的气球形长周期光纤光栅(LPFG)位移传感器。[方法]采用RSOFT软件进行仿真与优化,得到光纤在不同曲率下的光谱形态,以此来确定测量区间。通过将多模光纤周期性嵌入单模光纤形成的气球形长周期光纤光栅(MMF-BLPFG),提供用于测量位移的参考峰。使用精密的连续切割装置作为实验基础,制备与仿真结果一致的实验样品进行测试。[结果]通过测量2个谐振峰的漂移,实现了36 mm的最大位移测量范围。[结论]该研究成果在舰船水下疏水空间管系的稳定性测量和连续监测等需要大规模测量的场景中具有良好的应用潜力。

结构调制型长周期光纤光栅温度传感器研究

燃油系统的温度监测对于飞行器的安全、性能和可靠性至关重要。本文提出并测试了一种基于激光蚀刻法在保偏光纤上制备的长周期光纤光栅温度传感器,有望用于飞机内部液体温度监测。通过解调该种光纤光栅谐振峰的波长变化,可以实现对环境温度的精准测量。试验结果表明,该传感器具有83.1pm/℃的温度灵敏度和0.32 pm/με的低应变响应。由于光纤具有耐腐蚀、抗电磁干扰,不易产生电火花等特性,在替代电学传感器使用时可以提升飞行器的安全性。

Fiber laser twist sensor with hybrid few-mode tilted Bragg grating and few-mode long period grating

A twist sensor with hybrid few-mode tilted fiber Bragg grating(FM-TFBG) and few-mode long period grating(FM-LPG) in fiber laser cavity is demonstrated. The FM-LPG is utilized to excite LP11 core mode. The FM-TFBG is used for sensing. The transverse modes at 1 553.9 nm and 1 550.5 nm are LP01 and LP21 core modes, respectively, which are coupled from forward-propagating LP11 core mode. These two excitation wavelengths have opposite variation tendencies, which participate in sensing. The twist sensitivity of 0.16 dB/° from-40° to 40° is achieved. The proposed sensor has potentially used for structure monitoring in many areas.

Long Period Fiber Grating Based Refractive Index Sensor With Enhanced Sensitivity Using Michelson Interferometric Arrangement

The long period fiber grating （LPFG） is widely used as a sensor due to its high sensitivity and resolution. However, the broad bandwidth of the attenuation bands formed by the mode coupling between the fundamental core mode and the cladding modes constitutes a difficulty when the device is used as a conventional sensor. To overcome this limitation, a Michelson interferometer-type sensor configuration has been developed, using an LPFG grating pair formed by coating a mirror at the distal end of the LPFG. This sensor configuration is more convenient to use and is able to overcome the limitations of the single LPFG based sensor as the shifts in the attenuation bands being more easily detectable due to the formation of the sharp spectral fringe pattern in the LPFG based Michelson interferometer. In this work, I studied the LPFG based Michelson interferometer as the refractive index sensor and discussed the sensitivity enhancement of the LPFG based Michelson interferometer as a refractive index sensor by employing higher order cladding modes and by reducing the cladding radius. The results demonstrated the HE17 mode with a cladding radius of 62.5 μm, in the range of surrounding refractive index （SRI） of 1 - 1.45, and its resonant peak showed a wavelength shift of 26.99nm/RIU. When the cladding region was further reduced to 24μm, the resonant peak showed a wavelength shift of 569.88 nm/RIU, resulting in a sensitivity enhancement of nearly 21 times. However, as the cladding region was etched further, then the HE17 order cladding mode and higher mode would be cut off. Therefore, the implementation of high sensitivity for SRI sensing with the reduced cladding in the LPFG based Michelson interferometer is dependent on the proper combination of the cladding radius and cladding mode order.

A Novel Method of Edge Filter Linear Demodulation Using Long Period Grating in Fiber Sensor System

A novel method of linear demodulation based on edge filter is presented. An experimental system is built up in which LPG is used as the edge filter. We achieve linear demodulation with a bandwidth of 5nm.

Study of Modeling Aspects of Long Period Fiber Grating Using Three-Layer Fiber Geometry

The author studied and demonstrated the various modeling aspects of long period fiber grating （LPFG） such as the core effective index, cladding effective index, coupling coefficient, coupled mode theory, and transmission spectrum of the LPFG using three-layer fiber geometry. Actually, there are two different techniques used for theoretical modeling of the long period fiber grating. The first technique was used by Vengsarkar et al who described the phenomenon of long-period fiber gratings, and the second technique was reported by Erdogan who revealed the inaccuracies and shortcomings of the original method, thereby providing an accurate and updated alternative. The main difference between these two different approaches lies in their fiber geometry. Venserkar et al used two-layer fiber geometry which is simple but employs weakly guided approximation, whereas Erdogan used three-layer fiber geometry which is complex but also the most accurate technique for theoretical study of the LPFG. The author further discussed about the behavior of the transmission spectrum by altering different grating parameters such as the grating length, ultraviolet （UV） induced-index change, and grating period to achieve the desired flexibility. The author simulated the various results with the help of MATLAB.

Curvature Sensor Based on a Long-Period Grating in a Fiber Ring Resonator Interrogated by an OTDR

The proposed technique demonstrates a fiber ring resonator interrogated by an optical time domain reflectometer(OTDR),for intensity sensing.By using this methodology,a cavity round trip time of 2.85ms was obtained.For a proof of concept,a long-period grating was inserted in the resonant cavity operating as a curvature sensing device.A novel signal processing approach was outlined,regarding to the logarithmic behavior of the OTDR.Through analyzing the experimental results,an increase in the measured sensitivities was obtained by increasing applied bending.With curvatures performed from 1.8 m^(-1) to 4.5 m^(-1),the sensitivity values ranged from 2.94 dB·km^(-1) to 5.15 dB·km^(-1).In its turn,the sensitivities obtained presented a linear behavior when studied as a function of the applied curvature,following a slope of 0.86×10-3 dB.The advantages of applying this technique were also discussed,demonstrating two similar fiber rings multiplexed in a series of configurations.

Refractive Index and Strain Sensitivities of a Long Period Fiber Grating

CO2 激光照耀在所有固体 photonic bandgap 纤维之上制作的一个长时期纤维栅栏(LPFG ) 被调查，并且它的回声波长在有 15 dB 的调整深度和 2.6 nm 的 3-dB 带宽的 1335.76 nm。我们学习了它的种类，温度，和索引传感器特征， 0.992 pm/ 的种类敏感被使用获得线性适合，并且在折射索引和波长之间的关系服从了二次的功能的分发。另外，我们证明它的温度反应是相对感觉迟钝的(21.51 pm/

All-fiber linear polarization and orbital angular momentum modes amplifier based on few-mode erbium-doped fiber and long period fiber grating

A few-mode erbium-doped fiber（FM-EDF） is fabricated using modified chemical vapor deposition in combination with liquid solution. The core and cladding diameters of the fiber are approximately 19.44 and 124.12 μm,respectively. The refractive index difference is 0.98%, numerical aperture（NA） is 0.17, and normalized cut-off frequency at 1550 nm is 6.81. Therefore, it is a five-mode fiber, and can be used as a higher-order mode gain medium. Furthermore, a long period fiber grating（LPFG） is fabricated, which can convert LP〈01 mode to LP11 mode, and its conversion efficiency is up to 99%. The first-order orbital angular momentum（OAM） is also generated by combining the LPFG and polarization controller（PC）. Then, an all-fiber amplification system based on the FM-EDF and LPFG, for LP11 mode and first-order OAM beams, is built up. Its on-off gain of the LP11 mode beam is 37.2 d B at 1521.2 nm. The variation, whose transverse mode field intensity of first-order OAM is increased with the increase of pumping power, is obvious. These show that both the LP11 mode and first-order OAM beams are amplified in the all-fiber amplification system. This is a novel all-fiber amplification scheme,which can be used in the optical communication fields.