The effects of the components of solution for membrane casting and preparation conditions on the membrane performances are studied in this paper. Polyacrylonitrile (PAN) was used as polymer and DMAC as solvent. The ul...The effects of the components of solution for membrane casting and preparation conditions on the membrane performances are studied in this paper. Polyacrylonitrile (PAN) was used as polymer and DMAC as solvent. The ultrafiltration (UF) membranes whose cut-off of molecular weight is 150000 and flux of pure water reaches 150-200 ml/(cm2·h) were prepared by selecting proper components of solution for membrane casting and membrane preparation conditions.展开更多
The influence and signification of casting parameters on the solidification process of steel ingot were discussed based on the finite element method (FEM) results by orthogonal experiment method. The range analysis, a...The influence and signification of casting parameters on the solidification process of steel ingot were discussed based on the finite element method (FEM) results by orthogonal experiment method. The range analysis, analysis of variance (ANOVA) and optimization project were used to investigate the FEM results. In order to decrease the ingot riser head and improve the utilization ratio of ingot, the casting parameters involved casting temperature, pouring velocity and interface heat transfer were optimized to decrease shrinkage pore and microporosity. The results show that the heat transfer coefficient between melt and heated board is a more sensitive factor. It is favor to decrease the shrinkage pore and microporosity under the conditions of low temperature, high pouring velocity and high heat transfer between melt and mold. If heat transfer in the ingot body is quicker than that in the riser, the position of shrinkage pore and microporosity will be closer to riser top. The results of optimization project show that few of shrinkage pore and microporosity reach into ingot body with the rational parameters, so the riser size can be reduced.展开更多
文摘The effects of the components of solution for membrane casting and preparation conditions on the membrane performances are studied in this paper. Polyacrylonitrile (PAN) was used as polymer and DMAC as solvent. The ultrafiltration (UF) membranes whose cut-off of molecular weight is 150000 and flux of pure water reaches 150-200 ml/(cm2·h) were prepared by selecting proper components of solution for membrane casting and membrane preparation conditions.
基金Projects(50435010 50705080 50675187) supported by the National Natural Science Foundation of China
文摘The influence and signification of casting parameters on the solidification process of steel ingot were discussed based on the finite element method (FEM) results by orthogonal experiment method. The range analysis, analysis of variance (ANOVA) and optimization project were used to investigate the FEM results. In order to decrease the ingot riser head and improve the utilization ratio of ingot, the casting parameters involved casting temperature, pouring velocity and interface heat transfer were optimized to decrease shrinkage pore and microporosity. The results show that the heat transfer coefficient between melt and heated board is a more sensitive factor. It is favor to decrease the shrinkage pore and microporosity under the conditions of low temperature, high pouring velocity and high heat transfer between melt and mold. If heat transfer in the ingot body is quicker than that in the riser, the position of shrinkage pore and microporosity will be closer to riser top. The results of optimization project show that few of shrinkage pore and microporosity reach into ingot body with the rational parameters, so the riser size can be reduced.
