The temperature of gas flow inside a blast furnace （BF） changes significantly when the blast furnace is under unstable operations, and the temperature and stress distributions of cooling staves （CS） for BF work th...The temperature of gas flow inside a blast furnace （BF） changes significantly when the blast furnace is under unstable operations, and the temperature and stress distributions of cooling staves （CS） for BF work the same pattern. The effect of gas temperature on the temperature, stress, and displacement distributions of the cooling stave were analyzed as the gas temperature inside the blast furnace rose from 1000 to 1600℃ in 900 s. The results show that both the temperature and temperature gradient of the hot side of CS increase when the gas flow temperature inside BF rises. The temperature gradient of the hot side of CS is greater than that of the other area of CS and it can reach 65℃/mm. In the vertical direction of the hot side of CS, closer to the central part of CS, the stress intensity is greater than that of the other area of the hot side of CS, which causes cracks on the hot side of CS in the vertical di- rection. As the gas temperature increases, the stress intensity rate near the fixed pin increases and finally reaches 45 MPa/s. Fatigues near the fixed pin and bolts are caused by great stress intensity rate and the area around the pin can be damaged easily. The edge of CS bends toward the cold side and the central part of CS shifts toward the hot surface.展开更多
A new type of cooling stave with internal ribbed tube was proposed,and the heat transfer performance of the stave was studied by means of thermal test and numerical simulation.The temperature of cooling stave was moni...A new type of cooling stave with internal ribbed tube was proposed,and the heat transfer performance of the stave was studied by means of thermal test and numerical simulation.The temperature of cooling stave was monitored in the conditions of furnace gas temperature of 200-700 C and cooling water velocity of 0.2-1.0 m/s.The thermal test results show that the internal rib structure can form swirl in the water pipe and improve the cooling capacity of the cooling stave.The higher the furnace temperature or the lower the cooling water flow rate,the more obvious the advantage of the cooling stave with internal ribbed tube.The mathematical model of the cooling stave with internal ribbed tube was established by FLUENT software,and the influence of the internal rib structure parameters on the heat transfer performance of the cooling stave was discussed.It is suggested that the parameters of the internal ribbed tube should be 4 ribs,1 mm in height,5-7 mm in width,and 20-30 mm in lead.In the same common working conditions of the cooling stave,the maximum temperature of the newly designed cooling stave with internal ribbed tube is reduced by 5.6%compared with that of common cooling stave with round tube.The water flow rate in the internal ribbed tube only needs 0.9 m/s to reach the cooling effect of 2 m/s in the common tube cooling stave,which can save 55%of water.In case of water shortage accident of cooling stave,the maximum temperature of the cooling stave with internal ribbed tube is decreased by 22.4%compared with that of common round tube,which can effectively reduce the harm of water shortage and protect the cooling stave.展开更多
基金supported by the National Natural Science Foundation of China (No.60672145)
文摘The temperature of gas flow inside a blast furnace （BF） changes significantly when the blast furnace is under unstable operations, and the temperature and stress distributions of cooling staves （CS） for BF work the same pattern. The effect of gas temperature on the temperature, stress, and displacement distributions of the cooling stave were analyzed as the gas temperature inside the blast furnace rose from 1000 to 1600℃ in 900 s. The results show that both the temperature and temperature gradient of the hot side of CS increase when the gas flow temperature inside BF rises. The temperature gradient of the hot side of CS is greater than that of the other area of CS and it can reach 65℃/mm. In the vertical direction of the hot side of CS, closer to the central part of CS, the stress intensity is greater than that of the other area of the hot side of CS, which causes cracks on the hot side of CS in the vertical di- rection. As the gas temperature increases, the stress intensity rate near the fixed pin increases and finally reaches 45 MPa/s. Fatigues near the fixed pin and bolts are caused by great stress intensity rate and the area around the pin can be damaged easily. The edge of CS bends toward the cold side and the central part of CS shifts toward the hot surface.
基金funded by the National Natural Science Foundation of China(51574179)Nantong Science and Technology Project(JC2019154).
文摘A new type of cooling stave with internal ribbed tube was proposed,and the heat transfer performance of the stave was studied by means of thermal test and numerical simulation.The temperature of cooling stave was monitored in the conditions of furnace gas temperature of 200-700 C and cooling water velocity of 0.2-1.0 m/s.The thermal test results show that the internal rib structure can form swirl in the water pipe and improve the cooling capacity of the cooling stave.The higher the furnace temperature or the lower the cooling water flow rate,the more obvious the advantage of the cooling stave with internal ribbed tube.The mathematical model of the cooling stave with internal ribbed tube was established by FLUENT software,and the influence of the internal rib structure parameters on the heat transfer performance of the cooling stave was discussed.It is suggested that the parameters of the internal ribbed tube should be 4 ribs,1 mm in height,5-7 mm in width,and 20-30 mm in lead.In the same common working conditions of the cooling stave,the maximum temperature of the newly designed cooling stave with internal ribbed tube is reduced by 5.6%compared with that of common cooling stave with round tube.The water flow rate in the internal ribbed tube only needs 0.9 m/s to reach the cooling effect of 2 m/s in the common tube cooling stave,which can save 55%of water.In case of water shortage accident of cooling stave,the maximum temperature of the cooling stave with internal ribbed tube is decreased by 22.4%compared with that of common round tube,which can effectively reduce the harm of water shortage and protect the cooling stave.
