HZSM-5 zeolites undergoing the high-temperature process for boosting the bimolecular reaction in n-heptane catalytic cracking

High-temperature treatment is key to the preparation of zeolite catalysts.Herein,the effects of hightemperature treatment on the property and performance of HZSM-5 zeolites were studied in this work.X-Ray diffraction,N2physisorption,27Al magic angle spinning nuclear magnetic resonance(MAS NMR),and temperature-programmed desorption of ammonia results indicated that the hightemperature treatment at 650℃ hardly affected the inherent crystal and texture of HZSM-5zeolites but facilitated the conversion of framework Al to extra-framework Al,reducing the acid site and enhancing the acid strength.Moreover,the high-temperature treatment improved the performance of HZSM-5 zeolites in n-heptane catalytic cracking,promoting the conversion and light olefins yield while inhibiting coke formation.Based on the kinetic and mechanism analysis,the improvement of HZSM-5 performance caused by high-temperature treatment has been attributed to the formation of extra-framework Al,which enhanced the acid strength,facilitated the bimolecular reaction,and promoted the entropy change to overcome a higher energy barrier in n-heptane catalytic cracking.

Development and Catalytic Cracking Performance of Ultrastable Y Zeolite Rich in Secondary Pores

A novel ultra-stable zeolite, NSZ, rich in secondary pores was developed through the combination of gas-phase andmild hydrothermal methods. This zeolite was successfully tested in an industrial setting for the first time in the world. The porestructure characteristics of the NSZ zeolite prepared for industrial use were analyzed and characterized using BET. The resultsindicate a significant increase in the secondary pore volume of NSZ zeolite compared to the existing ultra-stable zeolite HSZ-5, which is produced through a conventional gas-phase method. The average secondary pore volume to total pore volume ratioin NSZ zeolite was found to be 58.96% higher. The catalytic cracking performance of NSZ zeolite was evaluated. The resultsshowed that the NSC-LTA catalyst, with NSZ as the active component, outperformed the HSC-LTA catalyst with HSZ-5 zeolitein terms of obtaining more high-value products (gasoline and liquefied petroleum gas) during the hydrogenated light cycle oilprocessing. Additionally, the NSC-LTA catalyst showed a significant improvement in coke selectivity.

Preparation and Electrochemical Performance Study of Catalytic Cracking Oil Slurry-based Porous Carbon Materials

Catalytic cracking oil slurry is a by-product of catalytic cracking projects,and the efficient conversion and sustainable utilization of this material are issues of continuous concern in the petroleum refining industry.In this study,oxygen-enriched activated carbon is prepared using a one-step KOH activation method with catalytic cracking oil slurry as the raw material.The as-prepared oil slurry-based activated carbon exhibits a high specific surface area of 2102 m^(2)/g,welldefined micropores with an average diameter of 2 nm,and a rich oxygen doping content of 32.97%.The electrochemical performance of the nitrogen-doped porous carbon is tested in a three-electrode system using a 6 mol/L KOH solution as the electrolyte.It achieves a specific capacitance of up to 230 F/g at a current density of 1 A/g.Moreover,the capacitance retention rate exceeds 89%after 10000 charge and discharge cycles,demonstrating excellent cycle stability.This method not only improves the utilization efficiency of industrial fuel waste but also reduces the production cost of supercapacitor electrode materials,thereby providing a simple and effective strategy for the resource utilization of catalytic cracking oil slurries.

A multiscale adaptive framework based on convolutional neural network:Application to fluid catalytic cracking product yield prediction

Since chemical processes are highly non-linear and multiscale,it is vital to deeply mine the multiscale coupling relationships embedded in the massive process data for the prediction and anomaly tracing of crucial process parameters and production indicators.While the integrated method of adaptive signal decomposition combined with time series models could effectively predict process variables,it does have limitations in capturing the high-frequency detail of the operation state when applied to complex chemical processes.In light of this,a novel Multiscale Multi-radius Multi-step Convolutional Neural Network(Msrt Net)is proposed for mining spatiotemporal multiscale information.First,the industrial data from the Fluid Catalytic Cracking(FCC)process decomposition using Complete Ensemble Empirical Mode Decomposition with Adaptive Noise(CEEMDAN)extract the multi-energy scale information of the feature subset.Then,convolution kernels with varying stride and padding structures are established to decouple the long-period operation process information encapsulated within the multi-energy scale data.Finally,a reconciliation network is trained to reconstruct the multiscale prediction results and obtain the final output.Msrt Net is initially assessed for its capability to untangle the spatiotemporal multiscale relationships among variables in the Tennessee Eastman Process(TEP).Subsequently,the performance of Msrt Net is evaluated in predicting product yield for a 2.80×10^(6) t/a FCC unit,taking diesel and gasoline yield as examples.In conclusion,Msrt Net can decouple and effectively extract spatiotemporal multiscale information from chemical process data and achieve a approximately reduction of 30%in prediction error compared to other time-series models.Furthermore,its robustness and transferability underscore its promising potential for broader applications.

Research Advances on Cyclohexane Catalytic Cracking

This article elaborates on the research achievements of domestic and foreign researchers in exploring the conversion pathways and reaction mechanisms of cyclohexane catalytic cracking in recent years.It analyzes the effects of different catalysts and process conditions on the conversion laws of cyclohexane,summarizes the conversion pathways of cyclohexane,and discusses the chemical mechanisms of several main reactions of cyclohexane in catalytic cracking,such as cracking,isomerization,hydrogen transfer,dehydrogenation,and alkylation;Several advanced characterization methods and common research methods were listed,and prospects for future development in this field were proposed based on existing research.

Targeted Catalytic Cracking to Olefins(TCO):Reaction Mechanism,Production Scheme,and Process Perspectives

Light olefins are important organic building blocks in the chemicals industry.The main low-carbon olefin production methods,such as catalytic cracking and steam cracking,have considerable room for improvement in their utilization of hydrocarbons.This review provides a thorough overview of recent studies on catalytic cracking,steam cracking,and the conversion of crude oil processes.To maximize the production of light olefins and reduce carbon emissions,the perceived benefits of various technologies are examined.Taking olefin generation and conversion as a link to expand upstream and downstream processes,a targeted catalytic cracking to olefins(TCO)process is proposed to meet current demands for the transformation of oil refining into chemical production.The main innovations of this process include a multiple feedstock supply,the development of medium-sized catalysts,and a diameter-transformed fluidizedbed reactor with different feeding schemes.In combination with other chemical processes,TCO is expected to play a critical role in enabling petroleum refining and chemical processes to achieve low carbon dioxide emissions.

Effect of particle size of single-crystalline hierarchical ZSM-5 on its surface mass transfer in n-heptane catalytic cracking

Single-crystalline hierarchical ZSM-5 zeolites with different particle sizes(namely 100,140,and 200 nm)were successfully prepared by adjusting the amount of tetrapropylammonium hydroxide(TPAOH),and investigated in n-heptane catalytic cracking reaction.Diffusional measurements by zero-length column(ZLC)method showed that the apparent diffusivities of n-heptane decreased with the reduction of particle size,indicating the existence of surface barriers.Moreover,with the decrease of particle size,the additional diffusion path length increased,which meant the influence of surface barriers became more apparent.Despite the change of surface barriers,the intracrystalline diffusion still dominated the overall diffusion.Catalytic performance showed that the zeolite with smaller particle size had better stability.

Experiment and modeling of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites

Since paraffins catalytic cracking was of significant importance to light olefins and aromatics production,this work was intended to gain insights into the feature and model of coke formation and catalyst deactivation in n-heptane catalytic cracking over HZSM-5 zeolites. 18 tests of n-heptane catalytic cracking were designed and carried out over HZSM-5 zeolites in a wide range of operating conditions. A particular attention was paid to the measurement of the conversion, product distribution, coke content, and the porosity and acidity of the fresh and spent HZSM-5 zeolites. It was found that alkene and aromatic promoted coke formation, and it reduced the pore volume and acid site of HZSM-5 zeolites, tailoring its performance in n-heptane catalytic cracking. The specific relationship between HZSM-5 zeolites, n-heptane conversion, product distribution and coke formation was quantitively characterized by the exponential and linear function. Based on the reaction network, the coupled scheme of coke formation and catalyst deactivation were specified for n-heptane catalytic cracking. The dual-model was proposed for the process simulation of n-heptane catalytic cracking over HZSM-5 zeolites. It predicted not only the conversion and product distribution but also coke content with the acceptable errors.

Fischer-Tropsch wax catalytic cracking for the production of low olefin and high octane number gasoline: Process optimization and heat effect calculation

To produce low olefin gasoline with high octane number by Fischer-Tropsch (F-T) wax fluid catalytic cracking (FCC) process, operating conditions optimization were carried out in the pilot-scale riser and turbulent fluidized bed (TFB) FCC unit. The experimental results in the riser indicated that under the condition of low reaction temperature and regenerated catalyst temperature, large catalyst-to-oil weight ratio (C/O) and long reaction time, the gasoline olefin content could be reduced to 20.28 wt%, but there is large octane number loss owing to a great loss in high octane number olefin. Therefore, a novel FCC process using the TFB reactor was proposed to strengthen the aromatization reaction. The reaction performance of TFB reactor were investigated. The result demonstrated that the TFB reactor has more significant effect in reducing olefins and improving aromatics. At the expense of certain gasoline yield, the gasoline olefin content reduced to 23.70 wt%, aromatics content could increase to 26.79 wt% and the RON was up to 91.0. The comparison of reactor structure and fluidization demonstrated that the TFB reactor has higher catalyst bed density. The reaction heat and coke combustion heat was calculated indicating the feasibility of its industrial application of the TFB process.

Core-shell-structured Composite ZSM-5@MCM-41 Catalysts:Fabrication,Characterization,and Enhanced Performance in Hexane Catalytic Cracking

A series of core-shell zeolites with a ZSM-5 zeolite core and a MCM-41 shell with varying shell thicknesses were successfully fabricated via a cetyltrimethylammonium bromide(CTAB)-directed sol-gel coating method in an ultradilute solution. Extensive characterization techniques, including XRD, TEM, N_(2) adsorption-desorption, NH_(3)-TPD, and IR measurements, confirmed the successful coating of a microporous ZSM-5 core with a mesoporous MCM-41 shell layer and were further employed to explore the textural properties and acidic properties of the samples. The hexane cracking results revealed a significant enhancement in olefin yields after introducing the MCM-41 shell to ZSM-5. Interestingly, a volcanic trend in olefin yields was observed with the increase in the shell thickness. In particular, the highest olefin yield of 51.5%, exceeding that of the core catalyst by 17.1%, was achieved when the shell thickness was controlled at 40 nm.Moreover, the catalyst lifetime investigation revealed that the core-shell composite catalyst exhibited a minimal reduction in hexane conversion of merely 3.8% over a 120 h reaction period, significantly outperforming the 11.3% reduction exhibited by the core catalyst. This remarkable catalytic performance was attributed to the passivation of external acid sites and the introduction of more developed pore channels by the shell, which effectively mitigated unwanted side reactions. The successful synthesis of these core-shell structured catalysts presents a novel strategy for improving catalytic performance in hexane cracking, in addition to serving as a solid foundation for the design of industrial catalysts for light naphtha cracking.

Influences of regeneration atmospheres on structural transformation and renderability of fluidized catalytic cracking catalyst

The regeneration of fluidized catalytic cracking(FCC)catalysts is an essential process in petroleum processing.The current study focused the regeneration reaction characteristics of spent fluidized catalytic cracking catalyst(SFCC)at different atmospheres with influences on pore evolution and activity,for a potential way to reduce emission,produce moderate chemical product(CO),and maintain catalyst activity.The results show that regeneration in air indicates a satisfaction on removing coke on the catalyst surface while giving a poor effect on eliminating the coke inside micropores.This is attributed that the combustion in air led to a higher temperature and further transformed kaolinite phase to silicaaluminum spinel crystals,which tended to collapse and block small pores or expand large pores,with similar results observed in pure O_(2)atmosphere.Nevertheless,catalysts regenerated in O_(2)/CO_(2)diminished the combustion damage to the pore structure,of which the micro porosity after regeneration increased by 32.4% and the total acid volume rose to 27.1%.The regeneration in pure CO_(2)displayed low conversion rate due to the endothermic reaction and low reactivity.The coexistence of gasification and partial oxidation can promote regeneration and maintain the original structure and good reactivity.Finally,a mechanism of the regeneration reaction at different atmospheres was revealed.

Catalytic cracking of light diesel over Au/ZSM-5 catalyst for increasing propylene production

The catalytic cracking of light diesel oil （235–337 ＆#176;C） over gold‐modified ZSM‐5 was investigated in a small confined fluidized bed at 460 ＆#176;C and ambient pressure. Different Au/ZSM‐5 catalysts were prepared by a modified deposition‐precipitation method by changing the preparation procedure and the amount of gold loading and were characterized by X‐ray diffraction, N2 adsorp‐tion‐desorption, temperature‐programmed desorption of NH3, transmission electron microscopy and inductively coupled plasma spectrometer. It was found that a small amount of gold had a posi‐tive effect on the catalytic cracking of light diesel oil and increased propylene production at a rela‐tively low temperature. The maintenance of the ZSM‐5 MFI structure, pore size distribution and the density of weak and strong acid sites of the Au/ZSM‐5 catalysts depended on the preparation pa‐rameters and the Au loading. Simultaneous enhancement of the micro‐activity and propylene pro‐duction relies on a synergy between the pore size distribution and the relative intensity of the weak and strong acid sites. A significant improvement in the micro‐activity index with an increase of 4.5 units and in the propylene selectivity with an increase of 23.2 units was obtained over the Au/ZSM‐5 catalyst with an actual Au loading of 0.17 wt%.

Regulating metal-acid double site balance on mesoporous SiO_(2)-Al_(2)O_(3) composite oxide for supercritical n-decane cracking

The balance between metal and acid sites directly affects the preparation of high-performance cracking catalysts with high heat sink and low coking.Nevertheless,how to control acid-metal sites balance and its relationship with cracking performance are reported scarcely.In this work,a series of Pt/Al_(2)O_(3)-SiO_(2) dual sites catalysts with different metal to acid active sites ratio(C_(M)/C_(SA))were constructed by ethanolassisted impregnation method and the impact on n-decane cracking under supercritical conditions was systematically and deeply investigated.The results showed that the conversion and carbon deposition increased gradually with varied C_(M)/C_(SA)and reached the balance at C_(M)/C_(SA)of 0.13.The proper ratio C_(M)/C_(SA)(0.13)can balance the deep dehydrogenation coking over metal active sites and high heat sink of cracking over acid active sites,the chemical heat sink reaches amazing 1.75 MJ/kg and carbon deposition is only22.03 mg/cm^(2) at 750℃.Meanwhile,the few metal sites at low C_(M)/C_(SA)and the few strong acid sites at high C_(M)/C_(SA)are the main factors limiting the cracking activity.Low C_(M)/C_(SA)limit the activation of C-H bond and deep dehydrogenation of coking precursor,resulting in relative low cracking activity and carbon deposition,while high C_(M)/C_(SA)limit the activation of C-C bond and increase the deep dehydrogenation.In this contribution,design and construction of metal-acid dual sites can not only provide the technical solution for the preparation of high heat sink and low coking cracking catalyst,but also deepen the understanding of the cracking path of hydrocarbon fuel.

Production of Low-carbon Light Olefins from Catalytic Cracking of Crude Bio-oil

Low-carbon light olefins are the basic feedstocks for the petrochemical industry. Catalytic cracking of crude bio-oil and its model compounds （including methanol, ethanol, acetic acid, acetone, and phenol） to light olefins were performed by using the La/HZSM-5 catalyst. The highest olefins yield from crude bio-oil reached 0.19 kg/（kg crude bio-oil）. The reaction conditions including temperature, weight hourly space velocity, and addition of La into the HZSM-5 zeolite can be used to control both olefins yield and selectivity. Moderate adjusting the acidity with a suitable ratio between the strong acid and weak acid sites through adding La to the zeolite effectively enhanced the olefins selectivity and improved the catalyst stability. The production of light olefins from crude bio-oil is closely associated with the chemical composition and hydrogen to carbon effective ratios of feedstock. The comparison between the catalytic cracking and pyrolysis of bio-oil was studied. The mechanism of the bio-oil conversion to light olefins was also discussed.

Effects of Light Rare Earth on Acidity and Catalytic Performance of HZSM-5 Zeolite for Catalytic Cracking of Butane to Light Olefins

The effects of rare earth（RE）on the structure,acidity,and catalytic performance of HZSM-5 zeolite were investigated.A series of RE/HZSM-5 catalysts,containing 7.54% RE（RE=La,Ce,Pr,Nd,Sm,Eu or Gd）,were prepared by the impregnation of the ZSM-5 type zeolites（Si/Al=64：1）with the corresponding RE nitrate aqueous solutions.The catalysts were characterized by means of FT-IR,UV-Vis,NH3-TPD,and IR spectroscopy of adsorbed pyridine.The catalytic performances of the RE/HZSM-5 for the catalytic cracking of mixed butane to light olefins were also measured with a fixed bed microreactor.The results revealed that the addition of light rare earth metal on the HZSM-5 catalyst greatly enhanced the selectivity to olefins,especially to propylene,thus increasing the total yield of olefins in the catalytic cracking of butane.Among the RE-modified HZSM-5 samples,Ce/HZSM-5 gave the highest yield of total olefins,and Nd/HZSM-5 gave the highest yield of propene at a reaction temperature of 600℃.The presence of rare earth metal on the HZSM-5 sample,not only modified the acidic properties of HZSM-5 including the amount of acid sites and acid type,that is,the ratio of L/B（Lewis acid/Brnsted acid）,but also altered the basic properties of it,which in turn promoted the catalytic performance of HZSM-5 for the catalytic cracking of butane.

Synergistic effect of W and P on ZSM-5 and its catalytic performance in the cracking of heavy oil

In order to develop the conversion of heavy oil with a high yield of propylene in the catalytic cracking process, ZSM-5 zeolite was modified by tungsten and phosphorus, which was proved to be an effective method. Characterization results show that the improvement of catalytic performance could be correlated to the interaction of phosphorus and tungsten species on ZSM-5. P inhibited the aggregation of tungsten species on ZSM-5 and was conductive to convert the tungsten species with octahedral coordination into tetrahedral coordination. And this ultimately led to that more acid sites were reserved after hydrothermal treatment in the tungsten and phosphorus co-modified ZSM-5 catalyst. Phosphorus species played an important role to restrain the dehydrogenation activity of tungsten. In addition, a model reflecting the interaction between tungsten species and ZSM-5 framework was proposed.

Research and Development of Novel Heavy Oil Catalytic Cracking Catalyst RCC-1

A novel heavy oil catalytic cracking catalyst RCC-1 was developed by using the ultra-stable zeolite, which was hydrothermally treated and modified through cleaning its pores to serve as the active component. The chemical composition and physicochemical properties of RCC-1 catalyst were studied by XRF, BET, pore volume analysis, attrition index analysis, and particle size distribution determination methods, and its catalytic cracking performance was also evaluated by a microreactor for light oil cracking and the ACE device. The test results showed that the new type of heavy oil catalytic cracking catalyst RCC-1 had good physicochemical properties and heavy oil cracking ability, strong anti-metallic contamination capability, good product distribution, good coke selectivity and gasoline selectivity, and excellent reduction of gasoline olefin content characteristics.

Research Progress in Catalytic Cracking Reaction of Tetralin and Decalin

The integrated catalytic hydrogenation and catalytic cracking process has been gradually adopted by refineries to satisfy the requirements for manufacture of light and clean petroleum products. To explore the reaction laws of hydrogenated aromatics in hydrotreated oil, the catalytic cracking reaction laws of hydrogenated aromatics have been reviewed by taking tetralin and decalin as examples of different degrees of hydrogenated aromatics. Moreover, the reaction mechanism of tetralin and decalin has been analyzed emphatically. The effects of zeolite pore structure, acid properties and process parameters on reaction laws have been analyzed carefully. It is considered that the catalytic cracking performance of hydrogenated aromatics with different hydrogen saturation degrees is quite different. It is necessary to control the hydrogenation depth, optimize the hydrocarbon composition of catalytic cracking feed materials for maximizing the yield of target products.

Transformation of Bio-oil into BTX by Bio-oil Catalytic Cracking

Production of benzene, toluene and xylenes （BTX） from bio-oil can provide basic feedstocks for the petrochemical industry. Catalytic conversion of bio-oil into BTX was performed by using different pore characteristics zeolites （HZSM-5, HY-zeolite, and MCM-41）. Based on the yield and selectivity of BTX, the production of aromatics decreases in the following order： HZSM-5〉MCM-41〉HY-zeolite. The highest BTX yield from bio-oil using HZSM-5 reached 33.1% with aromatics selectivity of 86.4%. The reaction conditions and catalyst characterization were investigated in detail to make clear the optimal operating parameters and the relation between the catalyst structure and the production of BTX.

Secondary Cracking of Gasoline and Diesel from Heavy Oil Catalytic Pyrolysis

This paper investigated the secondary cracking of gasoline and diesel from the catalytic pyrolysis of Daqing atmospheric residue on catalyst CEP-1 in a fluidized bed reactor.The results show that the secondary cracking reactivity of gasoline and diesel is poor,and the yield of total light olefins is only about 10%(by mass).As reaction temperature increases,ethylene yield increases,butylene yield decreases,and propylene yield shows a maximum.The optimal reaction temperature is about 670℃for the production of light olefins.With the enhance- ment of catalyst-to-oil mass ratio and steam-to-oil mass ratio,the yields of light olefins increase to some extent. About 6.30%of the mass of total aromatic rings is converted by secondary cracking,indicating that aromatic hy- drocarbons are not easy to undergo ring-opening reactions under the present experimental conditions.